Page 1 EOS M2 (W) INSTRUCTION MANUAL...
Page 2: Introduction
After shooting, play images back and check whether they have been properly recorded. If the camera or memory card is faulty and the images cannot be recorded or downloaded to a computer, Canon cannot be held liable for any loss or inconvenience caused.
Page 3: Compatible Cards
Compatible Cards The camera can use the following cards regardless of capacity. If the card is new or was previously formatted by another camera or computer, formatting the card with this camera is recommended (p.57). • SD memory cards • SDHC memory cards* •...
Page 4: Item Check List
Interface Cable EM-100DB * Battery Charger LC-E12 or LC-E12E is provided. (The LC-E12E comes with a power cord.) Software is not provided with the camera. Download it from the Canon Web site at the following URL. http://www.canon.com/icpd/  For information on how to download or install the software and Software Instruction Manual PDFs, see “Software Start Guide”...
Page 5: Instruction Manuals
Downloading and Viewing the Instruction Manual PDFs Download the Instruction Manual PDFs.  Connect to the Internet from a computer and access the Canon Web site at the following URL. http://www.canon.com/icpd/  Select your country or region of residence and download the Instruction Manual PDFs.
Page 6: Quick Start Guide
Quick Start Guide Insert the battery (p.34) To charge the battery, see page 32. Insert a card (p.34) With the card’s label facing toward the front of the camera, insert it into the card slot. Attach a lens (p.44) Align the lens’ mount index with the camera’s mount index.
Page 7 Quick Start Guide Set the Mode Dial to <A> (Scene Intelligent Auto) (p.64) All the necessary camera settings will be set automatically. Focus the subject (p.49) Aim the LCD monitor’s center over the subject. Press the shutter button halfway. The camera will focus the subject.
Page 8: Conventions Used In This Manual
Conventions Used in this Manual Icons in this Manual <5> : Indicates the Main Dial. <W><X><Y><Z><S> : Indicates the Main Dial’s top, bottom, left, and right keys. <Q>/<0> : Indicates the Main Dial’s center button. 0, 9, I, 7, 8 : Indicates that the corresponding function remains active for 4 sec., 6 sec., 8 sec., 10 sec., or 16 sec.
Page 9: Table Of Contents
Chapters For first-time digital single-lens non-reflex camera users, Chapters 1 and 2 explain the camera’s basic operations and shooting procedures. Introduction Getting Started Basic Shooting and Image Playback Creative Shooting Advanced Shooting Shooting Movies Handy Features Image Playback Post-Processing Images Printing Images Customizing the Camera Reference...
Page 10: Contents At A Glance
Contents at a Glance Shooting   Shoot automatically p.63-85 (A / Basic Zone modes)   Blur the background p.71 (C Creative Auto)  Keep the background in sharp focus p.139 (f Aperture-priority AE)   Shoot continuously p.124 (i Continuous shooting) ...
Page 11 Focusing   Change the focusing method p.108 (Focus modes)   Shoot a moving subject p.79 (Servo AF) Playback   View the images on the camera p.92 (x Playback)   Search for pictures quickly p.231 (Index display) p.232 (I Image browsing) ...
Page 12: Index To Features
Index to Features  White balance Power p.168  Color space p.173 Battery Image enhancement features  • Charging p.32  • Auto Lighting Optimizer p.153  • Installing/Removing p.34 • Lens peripheral illumination  • Battery check p.39  correction p.159 ...
Page 13 Index to Features   Quick Control Protect p.50 p.252   Creative filters Erase p.128 p.254  Quick Control p.236 Exposure Adjustment Image Editing  Exposure compensation p.148   AEB Creative filters p.150 p.260   AE lock Resize p.152 p.262...
Page 14: Contents
Contents Introduction Compatible Cards ..................3 Item Check List ..................4 Instruction Manuals.................. 5 Quick Start Guide..................6 Conventions Used in this Manual ............8 Chapters ....................9 Contents at a Glance ................10 Index to Features ................... 12 Contents....................14 Handling Precautions................
Page 15 Contents Basic Shooting and Image Playback A Fully Automatic Shooting (Scene Intelligent Auto) ......64 A Full Auto Techniques (Scene Intelligent Auto) ........ 67 Selecting a Shooting Mode (Basic Zone Mode)........69 C Creative Auto Shooting ..............71 2 Shooting Portraits (Portrait) .............. 76 3 Shooting Landscapes (Landscape) ..........
Page 16 Contents j Using the Self-timer ................ 126 U Using Filter Effects ................. 128 Advanced Shooting s: Convey the Subject’s Movement..........136 f: Changing the Depth of Field............139 a: Manual Exposure ................143 q Changing the Metering Mode ............146 Setting Exposure Compensation ............
Page 17 Contents Handy Features Handy Features..................208 Disabling the Beeper ................. 208 Card Reminder .................. 208 Setting the Image Review Time ............209 Displaying the Grid ................209 Setting Power-saving Features (LCD auto off, Camera auto off) ..210 Adjusting the LCD Monitor Brightness..........211 Creating and Selecting a Folder ............
Page 18 Contents K Protecting Images ................252 L Erasing Images ................254 B: Shooting Information Display............. 256 Post-Processing Images U Applying Filter Effects ..............260 S Resizing JPEG Images ..............262 N Cropping JPEG Images..............265 Printing Images Preparing to Print ................. 268 wPrinting ...................
Page 19 Contents Function Availability Table According to Shooting Mode ..... 308 System Map ..................312 Menu Settings ..................314 Troubleshooting Guide................. 323 Error Codes..................335 Specifications ..................336 Software Start Guide / Downloading Images to Your Computer Software Start Guide................350 Downloading and Viewing the Software Instruction Manual PDFs ..
Page 20: Handling Precautions
The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult the nearest Canon Service Center. Wipe off any water droplets with a dry and clean cloth. If the camera has been exposed to salty air, wipe it with a well- wrung wet cloth.
Page 21 If you have not used the camera for some time or if there is an important shoot such as a foreign trip coming up, have the camera checked by the nearest Canon Service Center or check the camera yourself and make sure it is working properly.
Page 22 If visible spots still remain after the automatic sensor cleaning, having the sensor cleaned by a Canon Service Center is recommended. Lens Mount Periodically cleaning the camera’s body and lens mount with a soft lens...
Page 23: Nomenclature
Nomenclature Microphone (p.177) Power button (p.37) Mode Dial (p.27) Flash sync contacts Shutter button Hot shoe (p.296) (p.49) <V> Focal plane mark (p.78) Speaker Wi-Fi antenna (p.239) Self-timer lamp/ AF-assist lamp (p.126/112) Strap mount (p.30) Remote control sensor (p.295) Terminal cover Grip EF-M lens mount index (p.44)
Page 24 Nomenclature LCD monitor/Touch screen (p.54, 211/p.59, 230, 239) Power/Access lamp (p.35) <k> Wi-Fi lamp <M> Menu button (p.54) <o> Movie start/stop button (p.176) <x> Playback button (p.92) <Q/0> Quick Control/ Set button (p.50, 86, 236/p.40, 54) Info button (p.52, 66, 92, 180) DC Coupler terminal cover (p.294) Tripod socket Card slot/Battery compartment cover...
Page 25 Nomenclature Information Display 1: Basic Information (in Creative Zone modes, p.27) Number of possible shots Maximum burst Number of possible shots during WB bracketing Battery check (p.39) zxcn Self-timer countdown QQuick Control Shooting mode AF point (FlexiZone - Single) (p.113) Touch shutter Magnified view (p.122)
Page 26 Nomenclature Information Display 2: Detailed information (in Creative Zone modes, p.27) e High-speed sync Creative filters (p.128) d FE lock/FEB in-progress Eye-Fi transmission status AF method (p.113) (p.305) d FlexiZone - Single Picture Style (p.106) c u+Tracking o FlexiZone - Multi White balance (p.168) Q Auto...
Page 27 Nomenclature Mode Dial A: Scene Intelligent Auto k: Movie Shooting Modes This is a fully automatic You can shoot movies mode. (p.176). The camera analyzes the k : Movie auto scene and sets the optimum exposure settings automatically (p.64). M : Movie manual exposure v: Basic Zone Modes All you do is press the shutter button.
Page 28 Nomenclature Lens EF-M Lens (Lens with no focus mode switch and no Image Stabilizer switch.) Focusing ring (p.108, 120) Zoom ring (p.45) Hood mount Zoom position index (p.45) Filter thread (front of lens) Lens mount index (p.44) Contacts (p.22)
Page 29 Nomenclature Battery Charger LC-E12 Charger for Battery Pack LP-E12 (p.32). Power plug Charge lamp Full-charge lamp Battery pack slot IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed.
Page 30 Nomenclature Attaching the Strap Attach the strap’s metallic ring to the camera.  Fit the strap’s metallic ring over the camera’s strap mount. Lock the strap’s metallic ring.  Use a coin or similar tool to turn the stopper clockwise until it stops (the index marks are aligned).
Page 31: Getting Started
Getting Started This chapter explains preparatory steps before you start shooting and basic camera operations.
Page 32: Charging The Battery
Charging the Battery Remove the protective cover.  Detach the protective cover provided with the battery. Attach the battery.  Align the battery’s mark with the battery charger’s mark, then attach the battery securely.  To detach the battery, follow the above procedure in reverse.
Page 33 Do not charge any battery other than a Battery Pack LP-E12.  Battery Pack LP-E12 is dedicated to Canon products only. Using it with an incompatible battery charger or product may result in malfunction or accidents for which Canon cannot be held liable.
Page 34: Installing And Removing The Battery And Card
 Slide the cover as shown by the arrows and open it. Insert the battery.  The battery’s “Canon” logo must be toward the camera’s front side as you insert the battery with the battery contacts in first.  Insert the battery until it clicks and locks in place.
Page 35 Installing and Removing the Battery and Card Check the number of possible shots.  When you set the power to <1>, the remaining number of images you can Possible shots record to the card will be displayed on the LCD monitor. Removing the Battery and Card Set the power to <2>.
Page 36: Insert A Card (P.
Installing and Removing the Battery and Card  After opening the card slot/battery compartment cover, be careful not to swing it back further. Otherwise, the hinge may break.  When the access lamp is blinking in orange, it indicates that images are being written to or read by the card, being erased, or data is being transferred.
Page 37: Turning On The Power
Turning on the Power If you set the power to <1> and the date/time/zone setting screen appears, see page 41 to set the date/time/zone. Pressing the power button toggles between <1> and <2>. With the power <2>, holding down the <x>...
Page 38: Power Saving  P
Turning on the Power 3 Power-saving Features  To save power, the LCD monitor turns off automatically if you do not operate the camera. If you continue to not operate the camera, the power will turn off automatically. While the LCD monitor is off, operation such as pressing a button will turn on the LCD monitor again.
Page 39: Checking The Battery Level
Turning on the Power z Checking the Battery Level When the power is turned on, the battery level will be indicated in one of four levels. z : Battery level is sufficient. x : Battery level is low, but the camera can still be used.
Page 40: 5> Main Dial And Button
<5> Main Dial and <Q/0> Button Main Dial The Main Dial can be operated in two ways: by turning it or pressing the top, bottom, left, or right edge. Turn the Main Dial <5>.  When a function can be set (after pressing a button or tapping an icon on the screen), you can mainly make a horizontal selection by turning the <5>...
Page 41: Setting The Date, Time, And Zone
Setting the Date, Time, and Zone When you turn on the camera for the first time or if the date/time/zone has been reset, the date/time/zone setting screen will appear. Follow the steps below to set the time zone first. If you set the camera to the correct time zone for where you currently live, when you travel to another time zone you can simply set the camera to the correct time zone for your destination to update the camera’s date/time automatically.
Page 42: Set The Date And Time
3 Setting the Date, Time, and Zone Set the date and time.  Press the <Y> <Z> keys to select the number.  Press <0> so <a> is displayed.  Press the <W> <X> keys to set the number, then press <0>. (Returns to .) Set the daylight saving time.
Page 43: Selecting The Interface Language
Selecting the Interface Language Display the menu screen.  Press the <M> button. Under the [52] tab, select [LanguageK].  Press the <Y> <Z> keys to select the [52] tab.  Press the <W> <X> keys to select [LanguageK], then press <0>. Set the desired language.
Page 44: Attaching And Detaching A Lens
Attaching and Detaching a Lens The camera is compatible with EF-M lenses. If you use Mount Adapter EF- EOS M, you can also use EF and EF-S lenses. Attaching a Lens Remove the caps.  Remove the rear lens cap and the body cap by turning them as shown by the arrows.
Page 45: Detaching The Lens
Attaching and Detaching a Lens Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow.  Turn the lens until it stops, then detach it.  Attach the rear lens cap to the detached lens.
Page 46: Image Stabilizer
Image Stabilizer When you use a lens with built-in Image Stabilizer, camera shake is corrected to obtain a sharper shot. With <A>, the Image Stabilizer is automatically set to [Enable]. (It does not appear in the menu.) * Lenses with built-in Image Stabilizer have “IS” in their names. With an EF-M Lens Set it with the menu.
Page 47: Take The Picture
Image Stabilizer With a Non-EF-M Lens Use the Image Stabilizer switch on the lens. Set the STABILIZER switch to <1>. Using the Image Stabilizer when Shooting Press the shutter button halfway.  The Image Stabilizer will operate. Take the picture. ...
Page 48: Basic Operation
Basic Operation Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake. Horizontal shooting Vertical shooting 1. Wrap your right hand around the camera grip firmly. 2. Hold the lens bottom with your left hand. 3.
Page 49: Shutter Button
Basic Operation Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing Halfway The camera will focus and adjust the exposure automatically (shutter speed and aperture set automatically).
Page 50: Quick Control
Quick Control You can directly select and set the shooting functions displayed on the LCD monitor. This is called Quick Control. There are two types of Quick Control screens: Q Quick Control and B Quick Control. Hereafter, “Quick Control” refers to Q Quick Control. Q Quick Control With Q Quick Control, you can set functions while looking at the shooting screen.
Page 51 Quick Control Set the desired function setting.  Select the function setting by tapping an icon displayed at the bottom of the screen.  There are also functions with more settings when you tap [ze].  To return to the shooting screen, tap [2] or press <0>.
Page 52 Quick Control B Quick Control With B Quick Control, you can select a shooting function from a list and set it. Press the button.  Each time you press the button, the displayed information will change.  Display the B Quick Control screen. Basic information Detailed information B Quick Control...
Page 53 Quick Control Set the desired function setting.  On the screen that appears, tap a function setting to set it.  There are also functions with more settings when you tap [zDetail set.]. Shutter speed (p.136) Aperture (p.139) Shooting mode (p.27) Highlight tone priority* (p.289) Exposure ISO speed (p.102)
Page 54: Menu Operations
Menu Operations You can set various settings with the menus such as the image-recording quality, date/time, etc. Operate the menu functions with the <M> button, Main Dial, and <0> button. <M> button <0> button LCD monitor Main Dial Menu Screen The menu tabs and items displayed will differ depending on the shooting mode.
Page 55 3 Menu Operations Menu Setting Procedure Display the menu screen.  Press the <M> button. Select a tab.  Press the Main Dial’s <Y> <Z> keys to select a tab (group of functions).  For example, in this manual, “the [A3] tab”...
Page 56 3 Menu Operations Set the desired setting.  Press <0> to set it. Exit the setting.  Press the <M> button to return to the shooting function settings screen.  Even when the menu screen or captured image is displayed, pressing the shutter button will enable you to shoot immediately.
Page 57: Formatting The Card
Formatting the Card If the card is new or was previously formatted by another camera or computer, formatting the card with the camera is recommended. When the card is formatted, all images and data in the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep.
Page 58 3 Formatting the Card Execute [Format card] in the following cases:  The card is new.  The card was formatted by a different camera or a computer.  The card is full with images or data.  A card error is displayed (p.335). What is low-level formatting? ...
Page 59: Using The Touch Screen
d Using the Touch Screen The LCD monitor is a touch-sensitive panel that you can operate with your fingers. Quick Control (Sample display)  Use your finger to tap (touch briefly and then remove your finger from) the LCD monitor. ...
Page 60 d Using the Touch Screen Drag Menu screen (Sample display)  Slide your finger while touching the LCD monitor. Scale display (Sample display) Operations possible by dragging your finger on the screen  Selecting a menu tab or item after pressing the <M> button ...
Page 61 d Using the Touch Screen 3 Silencing the Beep during Touch Operations If [53: Beep] is set to [Touch to h] or [Disable], the beep will not sound during touch operations. 3 Setting the Touch Control Select [Touch control].  Under the [53] tab, select [Touch control], then press <0>.
Page 62: Feature Guide
Feature Guide The Feature guide is a simple description of the respective shooting mode, function, or option. It is displayed when you change the shooting mode or use the Quick Control screen during still photo shooting, movie shooting, or playback. When you select a function or option on the Quick Control screen, the Feature guide description is displayed.
Page 63: Basic Shooting And Image Playback
Basic Shooting and Image Playback This chapter explains how to shoot with Scene Intelligent Auto and Basic Zone modes and how to play back images. With <A>, you can shoot just by pressing the shutter button. With <v>, you can also blur the background (p.74), change the ambience (p.87), and match the lighting or scene (p.90).
Page 64: A Fully Automatic Shooting (Scene Intelligent Auto)
A Fully Automatic Shooting (Scene Intelligent Auto) <A> is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. Set the Mode Dial to <A>. Move the AF point. AF point  Tap the screen to move the AF point to where you want to focus.
Page 65 A Fully Automatic Shooting (Scene Intelligent Auto)  The <A> mode makes the colors look more impressive in nature, outdoor, and sunset scenes. If the desired color tone is not obtained, use a Creative Zone mode and select a Picture Style other than <D> and shoot (p.106). ...
Page 66: Information Display
A Fully Automatic Shooting (Scene Intelligent Auto) Information Display  Each time you press the button, the information display will change. AF method Possible shots • d : FlexiZone - Single Battery check • c :u+Tracking Q Quick Control •...
Page 67: A Full Auto Techniques (Scene Intelligent Auto)
A Full Auto Techniques (Scene Intelligent Auto) Recomposing the Shot Depending on the scene, instead of having the subject at the center, you can put the subject toward the right or left and include some background. This gives the picture more balance and depth. While you press the shutter button halfway to focus a still subject, the focus will be locked at the subject’s distance.
Page 68: Scene Icons
A Full Auto Techniques (Scene Intelligent Auto) Scene Icons When you shoot in the <A> mode, an icon representing the scene detected by the camera will be displayed on the upper left of the screen (at the position of the shooting mode icon). Subject Portrait Non-Portrait...
Page 69: Selecting A Shooting Mode (Basic Zone Mode)
Selecting a Shooting Mode (Basic Zone Mode) Set the Mode Dial to <v>. Tap the shooting mode icon on the screen’s upper left corner.  The shooting mode selection screen will appear.  If this screen is not displayed, press the ...
Page 70 Selecting a Shooting Mode (Basic Zone Mode) Final Image Simulation The final image simulation reflects the settings of the Picture Style, white balance and other functions in the image so you can see what the captured image will look like. The following settings will be automatically reflected.
Page 71: C Creative Auto Shooting
C Creative Auto Shooting In the <C> mode, you can set the following functions before shooting: (1) Ambience-based shots, (2) Extra Effect Shot, (3) Flash firing, (4) Background blur, and (5) Drive/self-timer mode. The default settings are the same as the <A> mode. * CA stands for Creative Auto.
Page 72 C Creative Auto Shooting Tap the desired setting to select it.  The selected function and Feature guide (p.62) will appear.  For setting procedure and details on each function, see pages 72-75.  Select the function, then tap [2]. Take the picture.
Page 73 C Creative Auto Shooting (2) Extra Effect Shot • You can select any of the following effects before shooting: Creative filters (p.128), Picture Styles (p.106), and Ambience-based shots (p.87). • Select [c: Enable], then tap [2]. • Tap [e] and [f] to select a shooting effect. •...
Page 74 C Creative Auto Shooting Setting by Tapping the Screen  (4) Background blur • On the shooting screen, tap Background blur and set it. • If [2] is set, the degree of background blur will change depending on the brightness. •...
Page 75 C Creative Auto Shooting Setting by Pressing <j/i>  (5) Drive/self-timer mode Set by pressing <j/i>. [u] Single shooting: Shoot one image at a time. [i] Continuous shooting: While you hold down the shutter button completely, shots will be taken continuously. You can shoot up to approx. 4.6 shots per second.
Page 76: Shooting Portraits (Portrait)
2 Shooting Portraits (Portrait) The <2> (Portrait) mode blurs the background to make the person stand out better. It also makes skin tones and the hair look softer. Shooting Tips  The further the distance between the subject and background, the better.
Page 77: Shooting Landscapes (Landscape)
3 Shooting Landscapes (Landscape) Use the <3> (Landscape) mode for wide scenes when you want everything to be in focus from near to far. For vivid blues and greens, and very sharp and crisp images. Shooting Tips  With a zoom lens, use the wide-angle end. When using the wide-angle end of a zoom lens, objects near and far will be in focus better than at the telephoto end.
Page 78: Shooting Close-Ups (Close-Up)
4 Shooting Close-ups (Close-up) When you want to shoot flowers or small objects up close, use the <4> (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips  Use a simple background. A simple background with no other flowers or leaves, etc., makes small objects such as flowers stand out better.
Page 79: Shooting Moving Subjects (Sports)
5 Shooting Moving Subjects (Sports) Use the <5> (Sports) mode to shoot a moving subject. Shooting Tips  Shoot continuously. When focus is achieved, the AF point will turn blue. While the camera focuses, the beeper will sound. If focus cannot be achieved, the AF point will turn orange.
Page 80: C Shooting Children (Kids)
C Shooting Children (Kids) When you want to continuously focus and shoot children moving around, use <C> (Kids). Skin tones will look healthy. Shooting Tips  Shoot continuously. When focus is achieved, the AF point will turn blue. While the camera focuses, the beeper will sound. If focus cannot be achieved, the AF point will turn orange.
Page 81: P Shooting Food (Food)
P Shooting Food (Food) When shooting food, use (Food). The photo will look bright and vivid. Shooting Tips  Change the color tone. You can change [Color tone]. Food photos with a reddish tinge usually make the food look more vivid. To increase the food’s reddish tinge, set it toward [Warm].
Page 82: Shooting Night Portraits (With A Tripod)
6 Shooting Night Portraits (With a Tripod) To shoot people at night and obtain a natural-looking night scene in the background, use the <6> (Night Portrait) mode. A flash is required for shooting. Using a tripod is also recommended. Shooting Tips ...
Page 83: F Shooting Night Scenes (Handheld)
F Shooting Night Scenes (Handheld) Using a tripod when shooting a night scene gives the best results. However, the <F> (Handheld Night Scene) mode enables you to shoot night scenes even while handholding the camera. Four shots are taken continuously for each picture, and the resulting image with reduced camera shake is recorded.
Page 84: G Shooting Backlit Scenes (Hdr Backlight Control)
G Shooting Backlit Scenes (HDR Backlight Control) When shooting a scene having both bright and dark areas, use the <G> (HDR Backlight Control) mode. When you take one picture in this mode, three continuous shots are taken at different exposures. This results in one image, with a wide tonal range, that has minimized the blocked-up shadows caused by backlighting.
Page 85 Cautions for <6> Night Portrait and <F> Handheld Night Scene  It may be difficult to focus dots of light such as in a night scene. In such a case, set the lens’s focus mode to [MF] and focus manually. Cautions for <F>...
Page 86: Functions That Can Be Set With Quick Control
Functions that Can Be Set with Quick Control With <A> and in Basic Zone modes, you can set the following functions with Q Quick Control (p.50) and B Quick Control (p.52). Functions that Can Be Set with <A> and in Basic Zone Modes o: Default setting k: User selectable : Not selectable Basic Zone Modesv...
Page 87: Shoot By Ambience Selection
Shoot by Ambience Selection In Basic Zone modes (except <G>), you can select the ambience for shooting. C/2/3/4/ Ambience Ambience Effect 5/C/6/F 0 Standard setting No setting 1 Vivid Low / Standard / Strong 2 Soft Low / Standard / Strong 4 Warm Low / Standard / Strong 6 Intense...
Page 88 Shoot by Ambience Selection Set the ambience effect.  Tap on the item so that [Effect] appears on the bottom of the screen.  Tap [L] to select the level of the effect while checking the results on the LCD monitor. Take the picture.
Page 89 Shoot by Ambience Selection Ambience Settings 0 Standard setting Standard settings for the respective shooting mode. Note that <2> has image characteristics geared for portraits and <3> is geared for landscapes. Each ambience is a modification of the respective shooting mode’s image settings.
Page 90: Shoot By Lighting Or Scene Type
Shoot by Lighting or Scene Type In the <2>, <3>, <4>, <5>, and <C> Basic Zone modes, you can shoot while the settings match the lighting or scene type. Normally, [r Default setting] is adequate, but if the settings match the lighting condition or scene, the picture will look more accurate to your eye.
Page 91 Shoot by Lighting or Scene Type Take the picture.  Press the shutter button.  If you change the shooting mode or set the power to <2>, the setting will revert back to [r Default setting]. Lighting or Scene Type Settings r Default setting Default setting suited for most subjects.
Page 92: Image Playback
x Image Playback The easiest way to play back images is explained below. For more details on playback procedures, see page 229. Play back the image.  Press the <x> button.  The last captured image or last image played back will appear. ...
Page 93: Creative Shooting
Creative Shooting With <A> and in Basic Zone modes, you can easily take pictures, but cannot change advanced function settings. In the <d> (Program AE) mode, you can set various functions for more creative shooting.  In the <d> mode, the camera sets the shutter speed and aperture automatically to obtain a standard exposure.
Page 94: D: Program Ae
d: Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. Set the Mode Dial to <w>. Tap the shooting mode icon on the screen’s upper left corner.  The shooting mode selection screen will appear.
Page 95 d: Program AE Check the display.  A standard exposure will be obtained as long as the shutter speed and aperture display do not blink. Take the picture.  Compose the shot and press the shutter button completely. Shooting Tips ...
Page 96 d: Program AE  If the “30"” shutter speed and the lower f/number blink, it indicates underexposure. Increase the ISO speed or use flash.  If the “4000” shutter speed and the higher f/number blink, it indicates overexposure. Decrease the ISO speed. Differences Between <d>...
Page 97: Setting The Image-Recording Quality
Setting the Image-recording Quality You can select the pixel count and the image quality. Ten image-recording quality settings are provided: 73, 83, 74, 84, 7a, 8a, b, c, 1+73, 1. Display the Quick Control screen.  Press the <Q> button to display it. Tap the image quality.
Page 98 ISO speed, Picture Style, Custom Functions, and other settings. * Figures in parentheses apply to a UHS-I compatible 8 GB card based on Canon’s testing standards. * Figures for the number of possible shots shown in the table are only approximates...
Page 99 Setting the Image-recording Quality  I want to select the image-recording quality matching the paper size for printing. Refer to the diagram on the left when Paper size choosing the image-recording quality. If you A2 (59.4x42 cm/23.4x16.5 in.) want to crop the image, selecting a higher quality (more pixels) such as 73, 83, A3 (42x29.7 cm/ 1+73...
Page 100 • When the software CD-ROM (EOS DIGITAL Solution Disk) is not provided with the camera: 9 Download Digital Photo Professional compatible with this camera from the Canon Web site.  Commercially-available software may not be able to display RAW images taken with this camera.
Page 101 Setting the Image-recording Quality Image-recording Quality and Aspect Ratio The image’s aspect ratio can be set with [Aspect ratio] under the [A1] tab. The area surrounding the image on the LCD monitor is masked in black when the following aspect ratios are set: [4:3] [16:9] [1:1]. ...
Page 102: I: Changing The Iso Speed
i: Changing the ISO Speedt Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. With <A> and in Basic Zone modes, the ISO speed is set automatically (p.104). Using the Shooting Screen’s ISO Display Tap the ISO speed.
Page 103 i: Changing the ISO Speedt ISO Speed Guide Shooting Situation ISO Speed Flash Range (No flash) ISO 100 - ISO 400 Sunny outdoors The higher the ISO speed, Overcast skies or ISO 400 - ISO 1600 the farther the flash range evening time will extend.
Page 104 i: Changing the ISO Speedt ISO [AUTO] If the ISO speed is set to [AUTO] and you press the shutter button halfway, the current ISO speed will be displayed. As indicated below, the ISO speed will be set automatically to suit the shooting mode. Shooting Mode ISO Speed Setting A/C/2/4/5/C/P/...
Page 105 i: Changing the ISO Speedt 3 Setting the Maximum ISO Speed for [ISO Auto]w For ISO Auto, you can set the maximum ISO speed limit within ISO 400 - ISO 6400. Under the [A3] tab, select [ISO Auto], then press <0>. Select the ISO speed, then press <0>.
Page 106: A Selecting A Picture Style
A Selecting a Picture Stylet Six Picture Styles are provided to suit your photographic expression or subject. Each one can be fine-tuned. Display the Quick Control screen.  Press the <Q> button to display it. Tap the Picture Style. Tap the desired setting to select it. ...
Page 107 A Selecting a Picture Stylet Q Portrait For smooth skin tones. The image looks softer. Suited for close-up portraits. By changing the [Color tone] (p.164), you can adjust the skin tone. R Landscape For vivid blues and greens, and very sharp and crisp images. Effective for impressive landscapes.
Page 108: Selecting A Focusing Method
Selecting a Focusing Method With an EF-M Lens Select [Focus mode].  Under the [A2] tab, select [Focus mode].  [Focus mode] will be displayed when an EF-M lens is attached. It will not be displayed when an EF or EF-S lens is attached.
Page 109 3 Selecting a Focusing Method With a Non-EF-M Lens  Set the lens focus mode switch to <AF> or <MF>. Using Continuous AF The camera focuses the subject continuously to achieve rough focus. This makes it quicker to achieve focus when you press the shutter button halfway.
Page 110: Af: Changing The Autofocus Operation
AF: Changing the Autofocus Operationt In Creative Zone modes, you can select the AF (autofocus) operation to suit the shooting condition or subject. With <A> and in Basic Zone modes, the optimum AF operation is set for the respective shooting mode. Set the focus mode to [AF].
Page 111 AF: Changing the Autofocus Operationt One-Shot AF for Still Subjects Suited for still subjects. When you press the shutter button halfway, the camera will focus only once.  When focus is achieved, the AF point will turn green and the beeper will sound.
Page 112 AF: Changing the Autofocus Operationt When an EF or EF-S lens is used, the focus will be locked as shooting starts, even if you shoot continuously with Servo AF (except for STM lenses). When using Servo AF in a Creative Zone mode, the beeper will not sound even when focus is achieved.
Page 113: Using Af To Focus (Af Method)
Using AF to Focus (AF Method) Selecting the AF Method You can select an AF method to suit the shooting conditions and your subject. The following AF methods are provided: [FlexiZone - Single], [u (face)+ Tracking] (p.114), and [FlexiZone - Multi] (p.116). If you want to achieve precise focus, set the lens focus mode switch to [MF], magnify the image, and focus manually (p.120).
Page 114 Using AF to Focus (AF Method) Focus the subject.  Aim the AF point over the subject and press the shutter button halfway.  When focus is achieved, the AF point turns green and the beeper sounds. (If [AF operation] is set to [Servo AF], the AF point turns blue and the beeper will not sound.) ...
Page 115 Using AF to Focus (AF Method) Focus the subject.  Press the shutter button halfway to focus.  When focus is achieved, the AF point turns green and the beeper sounds. (If [AF operation] is set to [Servo AF], the AF point turns blue and the beeper will not sound.) ...
Page 116 Using AF to Focus (AF Method) FlexiZone - Multi: o Up to 31 AF points (automatically selected) covering a wide area can be used to focus. This wide area can also be divided into 9 zones for focusing (zone selection). Select the AF zone.
Page 117 Using AF to Focus (AF Method) Take the picture.  Press the shutter button completely (p.64).  When the camera does not focus the desired target subject with automatic AF point selection, switch the AF method to zone selection or [FlexiZone - Single], and focus again.
Page 118 Using AF to Focus (AF Method) Notes About [FlexiZone - Single], [u (face)+Tracking], and [FlexiZone - Multi] AF Operation  Even when focus has been achieved, pressing the shutter button halfway will focus again.  The image brightness may change during and after the AF operation. ...
Page 119 In the above cases, if the camera cannot focus automatically, focus manually.  With some EF or EF-S lenses (Mount Adapter EF-EOS M required), it may take longer to achieve focus or correct focus may not be achieved. For more information, refer to Canon Web site.
Page 120: Mf: Manual Focus
MF: Manual Focus You can magnify the image and focus precisely with manual focus. Set the focus mode to [MF].  See page 108 to set the focus mode to [MF]. Display the magnifying frame.  Tap the [u] icon. ...
Page 121 MF: Manual Focus Focus manually.  While looking at the magnified image, turn the lens focusing ring to focus.  After achieving focus, tap [u] on the screen to return to the normal view. Take the picture.  Press the shutter button completely (p.64).
Page 122: Shooting With The Touch Shutter
x Shooting with the Touch Shutter Just by tapping the LCD monitor screen, you can focus and take the picture automatically. This works in all shooting modes. Enable the touch shutter.  Tap [y] on the screen’s bottom left. Each time you tap the icon, it will toggle between [y] and [x].
Page 123 x Shooting with the Touch Shutter  You can also enable the touch shutter by setting [Touch Shutter: Enable] under the [A3] tab.  To take a bulb exposure, tap the screen twice. The first tap on the screen will start the bulb exposure.
Page 124: Continuous Shooting
i Continuous Shooting You can shoot up to approx. 4.6 shots per second. This is effective for shooting a child walking toward you or capturing different facial expressions. Press the <j/i> button.  You can also select the shooting mode on the B Quick Control screen.
Page 125: Shooting Tips
i Continuous Shooting Shooting Tips  Also set the AF operation (p.110) matching the subject. • For a moving subject When using a lens with “STM” in its name, such as the EF-M18-55mm f/3.5-5.6 IS STM, the camera can keep focusing and shooting continuously during Servo AF.
Page 126: Using The Self-Timer
j Using the Self-timer Press the <j/i> button.  You can also select the shooting mode on the B Quick Control screen. Tap the self-timer. Q: 10-sec. self-timer The remote controller can also be used (p.295). l: 2-sec. self-timer q: 10-sec. self-timer plus continuous shots Tap [d]/[f] to set the number of multiple shots (2 to 10) to be taken with...
Page 127 j Using the Self-timer  With [q] (Self-timer: Continuous), the interval between shots may be prolonged depending on the shooting conditions such as the image-recording quality or flash.  When you shoot with Creative filters, even if you set the drive mode to [q], single shooting will take effect.
Page 128: U Using Filter Effects
U Using Filter Effects You can apply a filter effect (Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water painting effect, Toy camera effect, or Miniature effect) before shooting. These are called Creative filters. When you take the picture, the camera saves only the image with the filter effect applied.
Page 129 U Using Filter Effects Adjust the filter effect.  You can adjust the effect except the Miniature effect. When you tap on a filter, the [J] (except for Toy camera) or [K] (Toy camera) indicator will appear. Tap [L] or [M] to adjust the effect while checking the results on the LCD monitor.
Page 130 U Using Filter Effects Creative Filter Characteristics g Grainy B/W Creates a grainy black-and-white photo. You can change the black-and- white effect by adjusting the contrast. h Soft focus Gives the image a soft look. You can change the degree of softness by adjusting the blur.
Page 131 U Using Filter Effects s Toy camera effect Darkens the photo’s corners and applies a color tone that makes it look as if it was shot by a toy camera. You can change the color cast by adjusting the color tone. t Miniature effect Creates a diorama effect.
Page 132 Do not hold the camera in the same position for long periods of time. Even if the camera does not feel too hot, prolonged contact with the same body part may cause skin redness, blistering or low-temperature contact burns. The use of a tripod is recommended for people with circulation problems or very sensitive skin, or when using the camera in very hot places.
Page 133 When shooting, note the following: Shooting Result  If you take the picture in magnified view, the exposure may not come out as desired. Return to the normal view before taking the picture. (During the magnified view, the shutter speed and aperture turn red.) Even if you take the picture in magnified view, the image will be captured in the normal view.
Page 135: Advanced Shooting
Advanced Shooting This chapter builds on Chapter 3 and introduces more ways to shoot creatively.  The first half of this chapter explains how to use the <s>, <f>, and <a> modes.  All the functions explained in Chapter 3 can also be used in the <s>, <f>, and <a>...
Page 136: S: Convey The Subject's Movement
s: Convey the Subject’s Movement You can either freeze the action or create motion blur with the <s> (Shutter-priority AE) mode. * <s> stands for Time value. Blurred motion Frozen action (Slow shutter speed: 1/30 sec.) (Fast shutter speed: 1/2000 sec.) Set the Mode Dial to <w>.
Page 137 s: Convey the Subject’s Movement Set the desired shutter speed.  Turning the <5> dial to the right sets a faster shutter speed, and turning it to the left sets a slower one. Shutter speed  See “Shooting Tips” on the next page for advice on setting the shutter speed.
Page 138 s: Convey the Subject’s Movement Shooting Tips  To freeze the motion of a fast-moving subject Use a fast shutter speed such as 1/4000 sec. to 1/500 sec.  To blur a running child or animal and convey an impression of motion Use a medium shutter speed such as 1/250 sec.
Page 139: F: Changing The Depth Of Field
f: Changing the Depth of Field To blur the background or to make everything near and far look sharp, use <f> (Aperture-priority AE) to adjust the depth of field (range of acceptable focus). * <f> stands for Aperture value, which is the size of the diaphragm hole inside the lens.
Page 140 f: Changing the Depth of Field Set the desired aperture.  Turning the <5> dial to the right will set a higher f/number, and turning it to the left will set a lower f/number. Aperture (f/number)  The higher the f/number, the wider the depth of field where sharper focus is obtained in both the foreground and background.
Page 141 f: Changing the Depth of Field Shooting Tips  When using an aperture with a high f/number or shooting in low light scenes, note that camera shake can occur. A higher aperture f/number will make the shutter speed slower. Under low light, the shutter speed can be as long as 30 sec.
Page 142 f: Changing the Depth of Field Depth-of-Field Previeww The aperture opening (diaphragm) changes only at the moment when the picture is taken. Otherwise, the aperture remains fully open. Therefore, when you look at the scene on the LCD monitor, the depth of field will look narrow. You can check the depth of field with the procedure below.
Page 143: A: Manual Exposure
a: Manual Exposure You can set both the shutter speed and aperture manually as desired. This method is called manual exposure. * <a> stands for Manual. Set the Mode Dial to <w>. Tap the shooting mode icon on the screen’s upper left corner. ...
Page 144 a: Manual Exposure Check the exposure. Standard exposure index  When you press the shutter button halfway, the exposure level mark [N] will show how far the current exposure level Exposure level mark is from the standard exposure level. Set the exposure and take the picture.
Page 145: Bulb Exposures  P
a: Manual Exposure BULB: Bulb Exposures A bulb exposure keeps the shutter open for as long as you hold down the shutter button. It can be used to shoot fireworks and other subjects requiring long exposures.  In the manual shooting mode, turn the <5>...
Page 146: Changing The Metering Mode
q Changing the Metering Modet Four methods (metering modes) to measure the subject’s brightness are provided. Normally, evaluative metering is recommended. With <A> and in Basic Zone modes, evaluative metering is set automatically. Display the Quick Control screen.  Press the <Q> button to display it. Tap the metering mode.
Page 147 q Changing the Metering Modet q Evaluative metering This is a general-purpose metering mode suited even for backlit subjects. The camera sets the exposure automatically to suit the scene. w Partial metering Effective when the background is much brighter than the subject due to backlighting, etc. The gray area in the left figure is where the brightness is metered to obtain the standard exposure.
Page 148: Setting Exposure Compensation
Setting Exposure Compensationt O Setting Exposure Compensation Set exposure compensation if the exposure (without flash) does not come out as desired. This feature can be used in the <d>, <s>, and <f> shooting modes. You can set the exposure compensation up to ±3 stops in 1/3-stop increments.
Page 149: Exposure
Setting Exposure Compensationt Cancel the exposure compensation.  Exposure compensation will not be canceled even after turning off the power.  In steps 1 and 2, set the exposure level mark [N] back to the center to cancel the exposure compensation. Dark exposure Increased exposure for a brighter image...
Page 150: Auto Exposure Bracketing
Auto Exposure Bracketingt This feature takes exposure compensation a step further by varying the exposure automatically (up to ±2 stops in 1/3-stop increments) with three shots as shown below. You can then choose the best exposure. This is called AEB (Auto Exposure Bracketing). Standard exposure Darker exposure Brighter exposure...
Page 151: Exposure
Auto Exposure Bracketingt Take the picture.  Press the shutter button completely. The three bracketed shots will be taken in this sequence: standard exposure, decreased exposure, and increased exposure. AEB can also be set with [A3: Expo.comp./AEB]. Canceling AEB  Follow steps 1 to 3 to turn off the AEB level display.
Page 152: A Locking The Exposure (Ae Lock)
A Locking the Exposure (AE Lock)t You can lock the exposure when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the <A> button to lock the exposure, then recompose and take the shot.
Page 153: Auto Correction Of Brightness And Contrast (Auto Lighting Optimizer)
Auto Correction of Brightness and Contrastt If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. This function is called Auto Lighting Optimizer. The default setting is [Standard]. With JPEG images, the correction is applied when the image is captured.
Page 154: Exposure
Auto Correction of Brightness and Contrastt  Under [54: Custom Functions (C.Fn) ], if [3: Highlight tone priority] is set to [1: Enable], the Auto Lighting Optimizer will be set automatically to [Disable] and the setting cannot be changed.  Depending on the shooting conditions, noise may increase.
Page 155: Setting Noise Reduction
Setting Noise Reductiont High ISO Speed Noise Reduction This function reduces the noise generated in the image. Although noise reduction is applied at all ISO speeds, it is particularly effective at high ISO speeds. At low ISO speeds, the noise in the darker parts of the image (shadow areas) is further reduced.
Page 156: Exposure
3 Setting Noise Reductiont About Multi Shot Noise Reduction  If there is significant misalignment in the image due to camera shake, the noise reduction effect may be minimal.  If you are handholding the camera, keep it steady to prevent camera shake. Using a tripod is recommended.
Page 157: Exposure
3 Setting Noise Reductiont Long Exposure Noise Reduction You can reduce noise in long exposures. Select [Long exp. noise reduction].  Under the [A4] tab, select [Long exp. noise reduction], then press <0>. Set the desired setting.  Select the desired setting, then press <0>.
Page 158: Exposure
3 Setting Noise Reductiont  With [Auto] or [Enable], the noise reduction process after the picture is taken may take the same amount of time as the exposure. During the noise reduction process, “BUSY” will be displayed and you cannot take another picture.
Page 159: Lens Peripheral Illumination / Chromatic Aberration Correction
Lens Peripheral Illumination / Chromatic Aberration Correction Peripheral light fall-off is a phenomenon that makes the image corners look darker due to the lens characteristics. Color fringing along subject outlines is another chromatic aberration. Both lens aberrations can be corrected. RAW images can be corrected with Digital Photo Professional (EOS software, p.350).
Page 160 3 Lens Peripheral Illumination / Chromatic Aberration Correction Chromatic Aberration Correction Select the setting.  Check that [Correction data available] is displayed for the attached lens.  Select [Chromatic aberration], then press <0>.  Select [Enable], then press <0>.  If [Correction data not available] is displayed, see “Lens Correction Data”...
Page 161 Peripheral illumination correction and chromatic aberration correction cannot be applied to JPEG images already taken.  When using a non-Canon lens, setting the corrections to [Disable] is recommended, even if [Correction data available] is displayed.  If you use the magnified view during shooting, the peripheral illumination correction and chromatic aberration correction will not be reflected in the image shown on the screen.
Page 162: A Adjusting The Picture Style
A Adjusting the Picture Stylet You can customize a Picture Style by adjusting individual parameters such as [Sharpness] and [Contrast]. To see the resulting effects, take test shots. To customize [Monochrome], see page 165. Display the Quick Control screen.  Press the <Q>...
Page 163 A Adjusting the Picture Stylet Set the parameter.  Tap [h]/[g] to set the parameter, then tap [2].  The setting will be displayed.  By selecting [zDefault set.] in step 5, you can revert the respective Picture Style to its default parameter settings. ...
Page 164 A Adjusting the Picture Stylet Parameter Settings and Effects g Sharpness Adjusts the sharpness of the subject. To make it less sharp, set it toward the E end. The closer it is to E, the softer the image will look. To make it sharper, set it toward the F end.
Page 165 A Adjusting the Picture Stylet V Monochrome Adjustment For Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast] explained on the preceding page. kFilter Effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more.
Page 166: A Registering Customized Picture Styles
A Registering Customized Picture Stylest You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. You can create multiple Picture Styles with different settings for parameters such as sharpness and contrast.
Page 167 A Registering Customized Picture Stylest Select a parameter.  Tap a parameter such as [Sharpness] to select it. Set the parameter.  Tap [h]/[g] to set the parameter.  For details, see “Adjusting the Picture Style” on pages 162-165.  Press [2] to register the modified Picture Style.
Page 168: B: Matching The Light Source (White Balance)
B: Matching the Light Sourcet The function adjusting the color tone so that white objects look white in the picture is called white balance (WB). Normally, the <Q> (Auto) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with <Q>, you can select the white balance that matches the light source or set it manually by shooting a sheet of white paper, etc.
Page 169: Exposure
B: Matching the Light Sourcet O Custom White Balance Custom white balance enables you to manually set the white balance for a specific light source for better accuracy. Perform this procedure under the actual light source to be used. Shoot a white object. ...
Page 170: Exposure
B: Matching the Light Sourcet Select [O].  Tap the white balance.  Tap [O] (Custom) to select it, then tap [2].  If the exposure obtained in step 1 differs greatly from the standard exposure, a correct white balance may not be obtained. ...
Page 171: Adjusting The Color Tone For The Light Source
u Adjusting the Color Tone for the Light Sourcet You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels.
Page 172: White Balance Auto Bracketing
3 u Adjusting the Color Tone for the Light Sourcet White Balance Auto Bracketing With just one shot, three images with different color balances can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias or magenta/green bias.
Page 173: Setting The Color Reproduction Range
Setting the Color Reproduction Ranget The range of reproducible colors is called the color space. With this camera, the color space for captured images can be set to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. With <A> and in Basic Zone modes, sRGB is set. Select [Color space].
Page 175: Shooting Movies
Shooting Movies Set the Mode Dial to <k> to shoot movies. The movie recording format will be MOV.  For information on which cards can record movies, see page 3. Full HD 1080 Full HD 1080 indicates compatibility with High-Definition featuring 1080 vertical pixels (scanning lines).
Page 176: Shooting Movies
k Shooting Movies Connecting the camera to a TV set is recommended to play back the movies shot (p.247, 251). Autoexposure Shooting When you select the movie shooting mode [k], autoexposure is set to adjust the brightness automatically. Set the Mode Dial to <k>. Tap the shooting mode icon on the screen’s upper left corner.
Page 177: Exposure
k Shooting Movies  While shooting a movie, be careful not to cover the microphones with your finger. Microphones  With certain lenses, focus cannot be achieved with AF. Focus manually instead (p.120).  Cautions for movie shooting are on pages 204-206. ...
Page 178: Manual Exposure Shooting
k Shooting Movies Manual Exposure Shooting In the [M] shooting mode (Movie manual exposure), you can freely set the shutter speed, aperture, and ISO speed for movie shooting. Using manual exposure to shoot movies is for advanced users. Set the Mode Dial to <k>. Tap the shooting mode icon on the screen’s upper left corner.
Page 179: Exposure
k Shooting Movies ISO speed during manual-exposure shooting  With [Auto], the ISO speed will be set automatically within ISO 100 - ISO 6400.  You can set the ISO speed manually within ISO 100 - ISO 6400 in whole- stop increments.
Page 180: Exposure
k Shooting Movies Movie Shooting Screen  Each time you press the button, the information display will change. AF method Possible shots (still photos) • d : FlexiZone - Single Movie shooting remaining time*/ • c : u+Tracking Elapsed time •...
Page 181: Exposure
k Shooting Movies Notes on Movie Shooting Do not hold the camera in the same position for long periods of time. Even if the camera does not feel too hot, prolonged contact with the same body part may cause skin redness, blistering or low-temperature contact burns. The use of a tripod is recommended for people with circulation problems or very sensitive skin, or when using the camera in very hot places.
Page 182: Exposure
k Shooting Movies Final Image Simulation The final image simulation is a function that allows you to see the effects of the Picture Style, white balance, etc., on the image. During movie shooting, the image displayed will automatically reflect the effects of the settings listed below.
Page 183: Exposure
k Shooting Movies  The movie and still photo will be recorded as separate files on the card.  Functions particular to still photo shooting are shown below. Other functions will be the same as for movie shooting.  How to focus still photos taken during movie shooting is explained on page 204.
Page 184: B Quick Control During Movie Shooting
B Quick Control During Movie Shooting Aperture Sound recording Shutter speed Highlight tone priority* Movie shooting mode ISO speed Exposure Wind filter compensation Attenuator White balance Movie recording AF method size Battery check* Movie shooting time* Eye-Fi card* Auto Lighting Optimizer White balance correction/ Image-recording quality White balance bracketing...
Page 185: Setting The Movie Recording Size
Setting the Movie Recording Size You can select the movie’s image size [****x****] and frame rate [9] (frames recorded per second). The 9(frame rate) switches automatically depending on the [52: Video system] setting. Display the Quick Control screen.  Press the <Q> button to display it. Tap the movie recording size.
Page 186 Setting the Movie Recording Size Total Movie Recording Time and File Size Per Minute Total Recording Time (approx.) Movie Recording File Size Size (approx.) 4 GB Card 8 GB Card 16 GB Card [1920x1080] 11 min. 22 min. 44 min. 330 MB/min.
Page 187: Using Movie Digital Zoom
Using Movie Digital Zoom When the movie’s image size is [1920x1080] (Full HD), you can shoot with an approx. 3x to 10x digital zoom. Display the Quick Control screen.  Press the <Q> button to display it. Tap the Digital zoom icon. Select [P].
Page 188 Using Movie Digital Zoom  Tap [R] to zoom in or tap [V] to zoom out.  When you press the shutter button halfway, the camera will focus with [FlexiZone - Single] (fixed at center).  To cancel digital zoom, set [Disable] in step 3.
Page 189: Shooting Miniature Effect Movies
Shooting Miniature Effect Movies You can shoot sped-up movies with a Miniature (diorama) effect. Select the playback speed and shoot. Display the Quick Control screen.  Press the <Q> button to display it. Tap the Miniature effect movie icon.  Tap [T] (Miniature effect movie).
Page 190 Shooting Miniature Effect Movies Shoot the movie.  The [AF method] will be [FlexiZone - Single] to focus at the center of the white frame.  The white frame is not displayed while you shoot. Playback Speed and Play Time (for 1-minute movie) Speed Play Time U(5x)
Page 191: Shooting Video Snapshots
Shooting Video Snapshots You can easily create a short movie with the video snapshot function. A video snapshot is a short movie clip lasting approx. 2 sec., 4 sec., or 8 sec. A collection of video snapshots is called a video snapshot album and can be saved to the card as a single movie file.
Page 192 3 Shooting Video Snapshots Select [Album settings].  Select [Album settings], then press <0>.  If you want to continue shooting for an existing album, go to “Adding to an Existing Album” (p.196). Select [Create a new album].  Select [Create a new album], then press <0>.
Page 193 3 Shooting Video Snapshots Creating a Video Snapshot Album Shoot the first video snapshot.  Press the <o> (Movie start/stop) button to shoot a movie.  The blue bar indicating the shooting duration will gradually decrease. After the set shooting duration elapses, the shooting stops automatically.
Page 194 3 Shooting Video Snapshots Options in Steps 8 and 9 Function Description J Save as album The movie clip will be saved as the video (Step 8) snapshot album’s first video snapshot. The video snapshot just recorded will be J Add to album added to the album recorded immediately (Step 9) before.
Page 195 3 Shooting Video Snapshots [Playback video snapshot] Operations Function Playback Description Each time you press <0>, you can play or pause 7 Play the just-recorded video snapshot. Displays the first scene of the album’s first video 5 First frame snapshot. Each time you press <0>, the video snapshot skips v Skip backward* back by a few seconds.
Page 196 3 Shooting Video Snapshots Adding to an Existing Album Select [Add to existing album].  Follow step 4 on page 192 to select [Add to existing album], then press <0>. Select an existing album.  Press the <Y> <Z> keys to select an album, then press <0>.
Page 197 3 Shooting Video Snapshots Cautions for Shooting Video Snapshots  You can add to an album only video snapshots with the same duration (approx. 2 sec., 4 sec., or 8 sec. each).  Note that if you do any of the following while shooting video snapshots, a new album will be created for subsequent video snapshots.
Page 198 3 Shooting Video Snapshots Playing an Album You can play back a completed album in the same way as a normal movie (p.239). Play back the movie.  Press the <x> button to display images. Select the album.  Press the <Y> <Z> keys to select an album.
Page 199 3 Shooting Video Snapshots Editing an Album After shooting, you can rearrange, delete, or play back the video snapshots in the album. On the playback panel, select [X] (Edit).  The editing screen will be displayed. Select an editing operation. ...
Page 200 3 Shooting Video Snapshots Save the edited album.  Press the <M> button to return to the editing panel at the screen’s bottom.  Tap [W] (Save), or press the <Y> <Z> keys to select [W] (Save) and press <0>. ...
Page 201: Movie Menu Function Settings
Movie Menu Function Settings When you set the Mode Dial to <k>, the [Z1] tab will show functions dedicated to movie shooting. The menu options are as follows. [Z1] menu  Movie recording size You can set the image size and frame rate. For details, see pages 185- 186.
Page 202 3 Movie Menu Function Settings [Sound rec./Rec. level] options [Auto] : The sound-recording level is adjusted automatically. Auto level control will operate in response to the sound level. [Manual] : For advanced users. You can adjust the recording level manually. Select [Rec. level] and while looking at the level meter, press the <Y>...
Page 203 3 Movie Menu Function Settings  Movie Servo AF The default setting is [Enable]. You can focus by pressing the shutter button halfway regardless of the setting. • When [Enable] is set: • You can shoot a movie while focusing a moving subject continuously. •...
Page 204 3 Movie Menu Function Settings  AF with shutter button during <k> (movie recording) When you press the shutter button while shooting a movie, you can shoot a still photo. The default setting is [ONE SHOT]. • When [ONE SHOT] is set: •...
Page 205: Exposure
Movie Shooting Cautions Recording and Image Quality  If the attached lens has an Image Stabilizer and you set the Image Stabilizer (IS) to <1>, the Image Stabilizer will operate at all times even if you do not press the shutter button halfway. The Image Stabilizer consumes battery power and may shorten the total movie shooting time or decrease the number of possible shots depending on shooting conditions.
Page 206 Movie Shooting Cautions  When you press the shutter button halfway to autofocus during movie shooting, the following phenomena may occur. • Focus may become far off momentarily. • The brightness of the recorded movie may be different from that of the actual scene.
Page 207: Handy Features
Handy Features  Disabling the Beeper (p.208)  Card Reminder (p.208)  Setting the Image Review Time (p.209)  Displaying the Grid (p.209)  Setting Power-saving Features (LCD auto off, Camera auto off) (p.210)  Adjusting the LCD Monitor Brightness (p.211) ...
Page 208: Handy Features
Handy Features 3 Disabling the Beeper You can prevent the beeper from sounding when focus is achieved, during self-timer operation, and during touch screen operations. Under the [53] tab, select [Beep], then press <0>. Select [Disable], then press <0>. To silence the beeper only during touch screen operations, select [Touch to h].
Page 209: Setting The Image Review Time
Handy Features 3 Setting the Image Review Time You can change how long the image is displayed on the LCD monitor immediately after capture. If [Off] is set, the image will not be displayed immediately after image capture. If [Hold] is set, the image review will be displayed up until the [LCD auto off] time.
Page 210: Setting Power-Saving Features (Lcd Auto Off, Camera Auto Off)
Handy Features 3 Setting Power-saving Features (LCD auto off, Camera auto off) If you do not operate the camera for a while, first the LCD monitor and eventually the entire camera will turn off automatically to save power. The Power lamp will blink when you set the power to <1> and turn off when you are using the camera.
Page 211: Adjusting The Lcd Monitor Brightness
Handy Features 3 Adjusting the LCD Monitor Brightness When the ambient light is too bright or too dark, you can adjust the brightness of the LCD monitor to make it easier to read. You can either use the menu to set the brightness level or set the Custom Function to make it brighter temporarily.
Page 212: Creating And Selecting A Folder
Handy Features 3 Creating and Selecting a Folder You can freely create and select the folder where the captured images are to be saved. This operation is optional since a folder will be created automatically for saving captured images. Creating a Folder Select [Select folder].
Page 213: Selecting A Folder
Handy Features Selecting a Folder  With the folder selection screen Lowest file number displayed, select a folder and press Number of <0>. images in folder  Subsequent captured images will be recorded into the selected folder. Folder name Highest file number Folders As with “100CANON”...
Page 214: File Numbering Methods
Handy Features 3 File Numbering Methods The image files will be numbered from 0001 to 9999 in the order the images are taken, then saved in a folder. You can change how the file number is assigned. The file number will appear on your computer in this format: IMG_0001.JPG. Under the [51] tab, select [File numbering], then press <0>.
Page 215 Handy Features  Auto reset The file numbering restarts from 0001 each time the card is replaced or a new folder is created. When you replace the card or create a folder, the file numbering restarts from 0001 for the new images saved. This is convenient if you want to organize images by cards or folders.
Page 216: Setting Copyright Information
Handy Features 3 Setting Copyright Informationw When you set the copyright information, it will be appended to the image as Exif information. Select [Copyright information].  Under the [54] tab, select [Copyright information], then press <0>. Select the option to be set. ...
Page 217 Handy Features Text Entry Procedure  Changing the Entry Area: Press the button to toggle between the top and bottom areas.  Moving the Cursor: Either tap [h]/[g] in the top area or press the <Y> <Z> keys to move the cursor. ...
Page 218: Auto Rotation Of Vertical Images
Handy Features 3 Auto Rotation of Vertical Images When you shoot a vertical image and view it with the camera or computer, it will be rotated automatically to the vertical orientation. You can change this setting. Under the [51] tab, select [Auto rotate], then press <0>.
Page 219: Checking Camera Settings
Handy Features 3 Checking Camera Settings With the [54] tab’s [Displays camera settings], you can check the major camera settings. Settings display Card remaining capacity Color space (p.173) WB correction (p.171)/ WB bracketing (p.172) Touch control (p.61) Auto rotate display (p.218) Date/Time (p.41) Daylight saving time (p.42) Beeper (p.208)
Page 220: Reverting The Camera To The Default Settings
Handy Features 3 Reverting the Camera to the Default Settingsw In Creative Zone and movie shooting modes, the camera’s shooting settings and menu settings can be reverted to their defaults. With this procedure, all settings in all shooting modes, including <A> and Basic Zone modes, will revert to their default values.
Page 221: Exposure
Handy Features Still Photo Shooting Settings Image-recording Settings Image quality Basic Zone mode (Creative Auto) Picture Style Auto Shooting mode Creative Auto Lighting Standard Zone mode (Program AE) Optimizer AF operation One-Shot AF Peripheral Enable/ AF method FlexiZone - Single illumination Correction correction...
Page 222: Exposure
Handy Features Camera Settings Movie Shooting Settings Camera auto off 1 min. k (Movie Shooting mode auto exposure LCD auto off 1 min. Beep Enable AF method FlexiZone - Single Movie Servo AF Enable Release shutter Enable without card Focus mode Image review 2 sec.
Page 223: Changing The Shooting Settings Screen Color
Handy Features 3 Changing the Shooting Settings Screen Color You can change the background color of the shooting settings screen (B Quick Control). Under the [53] tab, select [Screen color], then press <0>. Select the desired color, then press <0>. 3 Changing the Exposure Value Display Time w You can change the length of time that the exposure value will be displayed (the exposure lock period when using AE lock).
Page 224: Sensor Cleaning
f Sensor Cleaning When you switch the power to <1> or <2> (or Camera auto off), the Self Cleaning Sensor Unit will operate automatically to remove dust on the image sensor. Normally, you need not pay attention to this operation. You can also activate or stop the Self Cleaning Sensor Unit when necessary.
Page 225: Manual Sensor Cleaning
The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. Set the power to <2>.
Page 226: Appending Dust Delete Data
Appending Dust Delete Datat Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that may be visible on captured images. However, if visible dust still remains, you can append the Dust Delete Data to images for erasing the dust spots later. The Dust Delete Data is used by Digital Photo Professional (EOS software, p.350) to erase the dust spots automatically.
Page 227 3 Appending Dust Delete Datat Shoot a solid-white object.  At a distance of 20 cm - 30 cm (0.7 ft. - 1.0 ft.), fill the LCD monitor with a patternless, solid-white object and take a picture.  The picture will be taken in aperture- priority AE mode at an aperture of f/22.
Page 229: Image Playback
Image Playback This chapter explains functions related to viewing photos and movies, in more detail than in Chapter 2 “Basic Shooting and Image Playback”. Here you will find explanations of how to play back and erase photos and movies with the camera and view them on a TV set.
Page 230: Playback With The Touch Screen
d Playback with the Touch Screen The LCD monitor is a touch-sensitive panel that you can touch with your fingers for playback operations. Press the <x> button to play back images. (The last captured image will appear.) If the power is off, you can hold down the <x> button for 2 sec. or longer to turn on the camera and display the playback screen.
Page 231: Index Display  P
d Playback with the Touch Screen Reduce Images (Index Display) Pinch two fingers. Touch the screen with two fingers spread apart, and pinch your fingers together on the screen.  Each time you pinch your fingers, the screen changes from a single-image display to an index display of 4 images, 9 images, 36 images, then 100 images.
Page 232: I Jumping Through Images (Jump Display)
I Jumping through Images (Jump Display) In the single-image display, you can turn the <5> dial to jump through the images forward or backward according to the jump method set. Select [Image jump with 5].  Under the [x2] tab, select [Image jump with 5], then press <0>.
Page 233: Rotating The Image
b Rotating the Image You can rotate the image for viewing. Select [Rotate image].  Under the [x1] tab, select [Rotate image], then press <0>. Select an image.  Press the <Y> <Z> keys to select the image to be rotated. ...
Page 234: Setting Ratings
Setting Ratings You can rate images and movies with one of five rating marks: l/m/n/ o/p. This function is called rating. Select [Rating].  Under the [x2] tab, select [Rating], then press <0>. Select an image.  Press the <Y> <Z> keys to select an image or movie to be rated.
Page 235 3 Setting Ratings The total number of images with a given rating that can be displayed is 999. If there are more than 999 images with a given rating, [###] will be displayed for that rating. Taking Advantage of Ratings ...
Page 236: Q Quick Control During Playback
Q Quick Control During Playback In the single-image display, you can press the <Q> button to set any of the following: [J: Protect images, b: Rotate image, 9: Rating, U: Creative filters, S: Resize (JPEG images only), N: Cropping, e: Image jump with 5, k: Wi-Fi*].
Page 237: Enjoying Movies
k Enjoying Movies Playback on a TV Set (p.247, 251) Use the AV cable AVC-DC400ST or HDMI cable HTC-100 (both sold separately) to connect the camera to a TV set. Then you can play captured movies and still photos on the TV set.
Page 238 k Enjoying Movies Playback and Editing with a Computer (p.350) The movie files recorded on the card can be transferred to a computer and played or edited with ImageBrowser EX (EOS software).  To have the movie play back smoothly on a computer, use a high- performance computer.
Page 239: Playing Movies
k Playing Movies Play back the image.  Press the <x> button to display images. Select a movie.  Press the <Y> <Z> keys to select a movie.  In the single-image display, [Z1] displayed on the upper left of the screen indicates a movie.
Page 240 k Playing Movies Displaying the Movie Playback Panel In the single-image display, tap [Z1].  The movie playback panel will appear at the bottom of the screen. Movie Playback Panel Operation Playback Description 7 Play Press <0> to toggle between play and stop. Adjust the slow motion speed by pressing the <Y>...
Page 241: Editing A Movie's First And Last Scenes
X Editing a Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in increments of approx. 1 second (except for video snapshots). On the movie playback panel, select [X].  The editing screen will be displayed. Specify the part to be edited out.
Page 242 X Editing a Movie’s First and Last Scenes Save the edited movie.  Select [W], then press <0>.  The save screen will appear.  To save it as a new file, select [New file]. To save it and overwrite the original movie file, select [Overwrite], then press <0>.
Page 243: Slide Show (Auto Playback)
Slide Show (Auto Playback) You can play back the images on the card as an automatic slide show. Select [Slide show].  Under the [x2] tab, select [Slide show], then press <0>. Select the images to be played. Number of images to be played ...
Page 244 3 Slide Show (Auto Playback) [iDate], [nFolder], or [9Rating]  Select the date, folder, or rating of the images to be played.  When [zH] is highlighted, press the button.  Select the desired option, then press <0>. [Date] [Folder] [Rating] Set [Set up] as desired.
Page 245: Start The Slide Show
3 Slide Show (Auto Playback) [Display time] [Repeat] [Transition effect] [Background music] Start the slide show.  Select [Start], then press <0>.  After [Loading image...] is displayed, the slide show will start. Quit the slide show.  To quit the slide show and return to the setting screen, press the <M>...
Page 246 3 Slide Show (Auto Playback) Selecting the Background Music Select [Background music].  Set [Background music] to [On], then press <0>.  If the card has no background music, you cannot perform step 2. Select the background music.  Press the <W> <X> keys to select the desired background music, then press <0>.
Page 247: Viewing Images On A Tv Set
Viewing Images on a TV Set You can view still photos and movies on a TV set.  Adjust the movie’s sound volume with the TV set. The sound volume cannot be adjusted with the camera.  Before connecting or disconnecting the cable between the camera and the TV set, turn off the camera and TV set.
Page 248 Viewing Images on a TV Set Press the <x> button.  The image will appear on the TV screen. (Nothing will be displayed on the camera’s LCD monitor.)  The images will automatically be displayed at the TV set’s optimum resolution.
Page 249 Viewing Images on a TV Set Using HDMI CEC TV Sets If the TV set connected to the camera with an HDMI cable is compatible with HDMI CEC*, you can use the TV set’s remote control for playback operations. * An HDMI-standard function enabling HDMI devices to control each other so that you can control them with one remote control unit.
Page 250 Viewing Images on a TV Set Press the remote control’s Enter Still photo playback menu button.  The menu appears and you can perform Movie playback menu the playback operations shown on the left. Press the / button to select the ...
Page 251 AV cable to connect the camera to a TV, the playback will be in standard definition. Connect the AV cable to the camera.  With the plug’s <Canon> logo facing the front of the camera, insert it into the <A/V OUT> terminal. Connect the AV cable to the TV set.
Page 252: K Protecting Images
K Protecting Images Protecting an image prevents it from being erased accidentally. 3 Protecting a Single Image Select [Protect images].  Under the [x1] tab, select [Protect images], then press <0>. Select [Select images].  Select [Select images], then press <0>.
Page 253 K Protecting Images 3 Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at one time. When you select [All images in folder] or [All images on card] in [x1: Protect images], all the images in the folder or on the card will be protected.
Page 254: L Erasing Images
L Erasing Images You can either select and erase images one by one or erase them in one batch. Protected images (p.252) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them.
Page 255 L Erasing Images Select [Select and erase images].  Select [Select and erase images], then press <0>.  An image will be displayed.  To select images on a three-image display, touch the LCD monitor with two fingers spread apart, then pinch the fingers together on the monitor.
Page 256: B: Shooting Information Display
B: Shooting Information Display Sample Still Photo Taken in a Creative Zone Mode Exposure compensation Protect images amount Rating Flash exposure compensation amount Folder number - File number Aperture Histogram Shutter speed (Brightness/RGB) Metering mode Picture Style/Settings Shooting mode ISO speed White balance Highlight tone priority Image-recording...
Page 257: Exposure
B: Shooting Information Display Sample Still Photo Taken with <A> or in a Basic Zone Mode Shooting mode Ambience and ambience effects Lighting or scene * With images taken with <A> or in a Basic Zone mode, the information displayed will differ depending on the shooting mode.
Page 258: Exposure
B: Shooting Information Display  Highlight Alert When the shooting information is displayed, any overexposed areas of the image will blink. To obtain more image detail in the overexposed areas, set the exposure compensation to a negative amount and shoot again. ...
Page 259: Post-Processing Images
Post-Processing Images After taking a picture, you can apply a filter effect, resize the image (reduce the number of pixels), or crop the image.  The camera may not be able to process images taken with another camera.  Post-processing images as described in this chapter is not possible while the camera is connected to a computer via the <C>...
Page 260: U Applying Filter Effects
U Applying Filter Effects You can apply the following Creative filters to an image and save it as a new image: Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water painting effect, Toy camera effect, and Miniature effect. You can use the same Creative filters that are available during still photo shooting (p.128).
Page 261 U Applying Filter Effects Adjust the filter effect.  Press the <Y> <Z> keys to adjust the filter effect, then press <0>.  For the Miniature effect, press the <W> <X> keys to move the white frame over the part of the image you want to remain sharp.
Page 262: S Resizing Jpeg Images
S Resizing JPEG Images You can resize an image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG 3/4/a/b images. RAW and JPEG c images cannot be resized. You can also resize with the Quick Control screen.
Page 263 S Resizing JPEG Images Save the image.  Select [OK] to save the resized image.  Check the destination folder and image file number, then select [OK].  To resize another image, repeat steps 2 to 4.  Press the <M> button to return to the menu.
Page 264 S Resizing JPEG Images Image Sizes The image size displayed in step 3 on page 262, such as [**M ****x****], has a 3:2 aspect ratio. The image sizes for each aspect ratio are shown in the table below. The asterisked image-recording quality figures do not exactly match the aspect ratio.
Page 265: N Cropping Jpeg Images
N Cropping JPEG Images You can crop a JPEG image as desired and save it as a new image. RAW and JPEG c images cannot be cropped. The 1+73 image’s JPEG image can be cropped. Select [Cropping].  Under the [x2] tab, select [Cropping], then press <0>.
Page 266 N Cropping JPEG Images Rotating the Cropping Frame Orientation  Turn the <5> dial to select [X].  Pressing <0> will toggle the cropping frame between the vertical and horizontal orientations. This enables you to create a vertical image from a horizontal one, and vice versa.
Page 267: Printing Images
Printing Images  Printing (p.268) You can connect the camera directly to a printer and print out the images on the card. The camera is compatible with “wPictBridge” which is the standard for direct printing. You can also use a wireless LAN to send images to a PictBridge (Wireless LAN) printer and print them.
Page 268: Preparing To Print
Preparing to Print The direct printing procedure can be performed entirely with the camera while you look at the LCD monitor. Connecting the Camera to a Printer Set the camera’s power to <2>. Set up the printer.  For details, refer to the printer’s instruction manual.
Page 269 Preparing to Print wPictBridge Play back the image.  Press the <x> button.  The image will appear, and the [w] icon will appear on the upper left to indicate that the camera is connected to a printer.  Before using the printer, make sure it has a PictBridge connection port. ...
Page 270: Wprinting
wPrinting The screen display and setting options will differ depending on the printer. Some settings may not be available. For details, refer to the printer’s instruction manual. Select the image to be printed. Printer-connected icon  Check that the [w] icon is displayed on the upper left of the LCD monitor.
Page 271 wPrinting Q Setting the Paper Size  Select the size of the paper loaded in the printer, then press <0>.  The paper type screen will appear. Y Setting the Paper Type  Select the type of the paper loaded in the printer, then press <0>.
Page 272: Exposure
wPrinting Bordered The print will have white borders along the edges. The print will have no borders. If your printer cannot print Borderless borderless prints, the print will have borders. The shooting information* will be imprinted on the border on Borderedc 9x13 cm and larger prints.
Page 273 wPrinting Set the printing effects.  Set them if necessary. If you do not need to set any printing effects, go to step 5.  What is displayed on the screen differs depending on the printer.  Select the option, then press <0>. ...
Page 274 wPrinting Set the date and file number imprinting.  Set it if necessary.  Select [I], then press <0>.  Set as desired, then press <0>. Set the number of copies.  Set it if necessary.  Select [R], then press <0>. ...
Page 275 wPrinting e Adjustment of Printing Effects In step 4 on page 273, if the [ze] icon is displayed brightly when you select a printing effect, you can press the button to adjust the printing effect. What can be adjusted or what is displayed will depend on the selection made in step 4.
Page 276: Cropping The Image
wPrinting Cropping the Image You can crop the image and print only the Tilt correction cropped portion as if the image was recomposed. Set the cropping right before printing. If you set the cropping and then set the print settings, you may have to set the cropping again before printing.
Page 277 wPrinting  Depending on the printer, the cropped image area may not be printed as you specified.  The smaller you make the cropping frame, the grainier the picture will look in the print. Handling Printer Errors If you resolve a printer error (no ink, no paper, etc.) and select [Continue] to resume printing but it does not resume, operate the buttons on the printer to resume printing.
Page 278: W Digital Print Order Format (Dpof)
W Digital Print Order Format (DPOF) You can set the print type, date imprinting, and file number imprinting. The print settings will be applied to all print-ordered images. (They cannot be set individually for each image.) Setting the Printing Options Select [Print order].
Page 279 W Digital Print Order Format (DPOF) K Standard Prints one image on one sheet. Multiple thumbnail images are printed on L Index Print type one sheet. Both Prints both the standard and index prints. Date [On] imprints the recorded date on the print. File number [On] imprints the file number on the print.
Page 280 W Digital Print Order Format (DPOF) Print Ordering  Sel.Image Select and order images one by one. To select images on a three-image display, touch the LCD monitor with two fingers spread apart, then pinch the fingers together on the monitor. To return to the single-image display, touch the LCD monitor with two fingers together, then spread the fingers apart on the monitor.
Page 281: W Direct Printing Of Print-Ordered Images
W Direct Printing of Print-Ordered Images With a PictBridge printer, you can easily print images with DPOF. Prepare to print.  See page 268. Follow the “Connecting the Camera to a Printer” procedure up to step 5. Under the [x1] tab, select [Print order]. Select [Print].
Page 282: Specifying Images For A Photobook
p Specifying Images for a Photobook When you select images to use in photobooks (up to 998 images) and use EOS Utility (EOS software) to transfer them to a computer, the selected images will be copied into a dedicated folder. This function is useful for ordering photobooks online.
Page 283 p Specifying Images for a Photobook Specifying All Images in a Folder or on a Card You can specify all the images in a folder or on a card at one time. When [x1: Photobook Set-up] is set to [All images in folder] or [All images on card], all the images in the folder or on the card will be specified.
Page 285: Customizing The Camera
Customizing the Camera You can customize various camera functions to suit your picture-taking preferences with Custom Functions. Custom Functions can be set and used in Creative Zone and movie shooting modes.
Page 286: Setting Custom Functions
Setting Custom Functionst Select [Custom Functions (C.Fn)].  Under the [54] tab, select [Custom Functions (C.Fn)], then press <0>. Custom Function number Select the Custom Function number.  Press the <Y> <Z> keys to select the Custom Function number, then press <0>.
Page 287: Exposure
3 Setting Custom Functionst Custom Functions Still Photo Movie C.Fn I: Exposure Shooting Shooting Exposure level increments p.288 During manual ISO expansion exposure C.Fn II: Image Highlight tone priority p.289 C.Fn III: Autofocus AF-assist beam (LED) firing p.290 C.Fn IV: Operation/Others Shutter/AE lock button p.290 XL button function...
Page 288: Custom Function Settings
Custom Function Settingst Custom Functions are organized into four groups based on the function type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus, C.Fn IV: Operation/ Others. C.Fn I: Exposure C.Fn-1 Exposure level increments 0: 1/3-stop 1: 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc.
Page 289: C.fn Ii: Image
3 Custom Function Settingst C.Fn II: Image C.Fn-3 Highlight tone priority 0: Disable 1: Enable Improves the highlight detail. The dynamic range is expanded from the standard 18% gray to bright highlights. The gradation between the grays and highlights becomes smoother. ...
Page 290: C.fn Iii: Autofocus
3 Custom Function Settingst C.Fn III: Autofocus C.Fn-4 AF-assist beam (LED) firing You can enable or disable the AF-assist beam. 0: Enable When necessary, the self-timer/AF-assist lamp will emit the AF-assist beam. This setting is applicable also for LED-compatible external flashes. 1: Disable The AF-assist beam is not emitted.
Page 291: Xl Button Function
3 Custom Function Settingst XL button function C.Fn-6 You can assign a frequently-used function to the <XL> button. While the camera is ready to shoot, press <XL>. 0: Normal (set center AF point) 1: Depth-of-field preview The aperture opening (diaphragm) changes only at the moment when the picture is taken.
Page 292: Registering My Menu
Registering My Menut Under the My Menu tab, you can register up to six menu options and Custom Functions whose settings you change frequently. Select [My Menu settings].  Under the [9] tab, select [My Menu settings], then press <0>. Select [Register to My Menu].
Page 293: Reference
Reference This chapter provides reference information for camera features, system accessories, etc. Certification Logo Under the [54] tab, if you select [Certification Logo Display] and press <0>, some of the logos of the camera’s certifications will appear. Other certification logos can be found in this Instruction Manual, on the camera body, and on the camera’s package.
Page 294: Using A Household Power Outlet
Using a Household Power Outlet With AC Adapter Kit ACK-E12 (sold separately), you can connect the camera to a household power outlet and not worry about the remaining battery level. Insert the DC Coupler.  Open the cover and insert the DC Coupler until it locks in place.
Page 295: Remote Control Shooting
Remote Control Shooting Remote Controller RC-6 (Sold Separately) This Remote Controller enables you to take pictures wirelessly up to approx. 5 meters/16.4 feet from the front of the camera. You can either shoot immediately or use a 2-sec. delay. Remote control sensor ...
Page 296: External Speedlites
External Speedlites EOS-dedicated, EX-series Speedlites The basic operation is simple. When an EX-series Speedlite (sold separately) is attached to the camera, almost all the automatic flash control is done by the camera. For detailed instructions, refer to the EX-series Speedlite’s instruction manual.
Page 297 External Speedlites  Shooting modes and flash modes when using Speedlites other than 90EX Shooting Mode Flash Mode d/s/f/a Flash on/Flash off A/C/2/4/3/5/C/P/6/F Flash on G/Movie shooting modes Flash off  FE lock FE lock is a flash photography method that ensures that a certain part of the subject is correctly illuminated.
Page 298 Using Non-Canon Flash Units Sync Speed The camera can synchronize with compact, non-Canon flash units at 1/200 sec. or slower shutter speeds. Use a sync speed slower than 1/200 sec. Be sure to test the flash unit beforehand to make sure it synchronizes properly with the camera.
Page 299: Setting Speedlite Functions
Setting Speedlite Functionst You can set Speedlite functions with the menu. Applicable only to a compatible EX-series Speedlite when attached to the camera. The setting procedure is the same as that for setting a camera menu function. Select [External Speedlite control]. ...
Page 300 3 Setting Speedlite Functionst Flash Synchronization Speed in Av Mode You can set the flash sync speed for flash photography in the Aperture-priority AE (f) mode.  l: Auto The flash sync speed is set automatically within a range of 1/200 sec. to 30 sec.
Page 301 3 Setting Speedlite Functionst Flash Function Settings On the screen, the settable functions and the display will differ depending on the Speedlite, current flash mode, flash Custom Function settings, etc. For details on your Speedlite’s flash functions, refer to the instruction manual of the Speedlite (sold separately).
Page 302 3 Setting Speedlite Functionst  Flash zoom (Flash coverage) With Speedlites that have a zooming flash head, you can set the flash coverage. Normally, set this to [AUTO] so that the camera will automatically set the flash coverage to match the lens focal length. ...
Page 303 3 Setting Speedlite Functionst  Flash exposure bracketing (FEB) While the flash output is changed automatically, three shots are taken. For details, refer to the instruction manual of a Speedlite compatible with flash exposure bracketing. When using second-curtain synchronization, set the shutter speed to 1/25 sec. or slower.
Page 304 3 Setting Speedlite Functionst Flash Custom Function Settings For details on the Speedlite’s Custom Functions, refer to the instruction manual of the Speedlite (sold separately). Select [Flash C.Fn settings].  Select [Flash C.Fn settings], then press <0>. Set the functions. ...
Page 305: Using Eye-Fi Cards
Using Eye-Fi Cards With a commercially-available Eye-Fi card already set up, you can automatically transfer captured images to a computer or upload them to an online service via a wireless LAN. The image transfer is a function of the Eye-Fi card. For instructions on how to set up and use the Eye-Fi card or to troubleshoot any image transfer problems, refer to the Eye-Fi card’s instruction manual or contact the card’s manufacturer.
Page 306 Using Eye-Fi Cards Check the [Access point SSID:].  Check that an access point is displayed for [Access point SSID:].  You can also check the Eye-Fi card’s MAC address and firmware version.  Press the <M> button three times to exit the menu.
Page 307 Using Eye-Fi Cards Cautions for Using Eye-Fi Cards  If [52: Wi-Fi] is set to [Enable], image transfer with an Eye-Fi card is not possible.  If “J” is displayed, an error occurred while retrieving the card information. Turn the camera’s power off and on again. ...
Page 308: Function Availability Table According To Shooting Mode
Function Availability Table According to Shooting Mode Still Photo Shooting o: Set automatically k: User selectable : Not selectable/Disabled Basic Zone Mode Creative Zone Mode Shooting Mode C 2 3 4 5 C P 6 F G d s f a Image-recording quality settings k k k k k k k k k k k k k k Automatically set/...
Page 309 Function Availability Table According to Shooting Mode Basic Zone Mode Creative Zone Mode Shooting Mode C 2 3 4 5 C P 6 F G d s f a k k k k k k k k k k k k k k Focus k k k k k k k k k k k k k k mode...
Page 310: Movie Shooting
Function Availability Table According to Shooting Mode Movie Shooting o: Set automatically k: User selectable : Not selectable/Disabled Movies Still Photos Shooting Mode Image-recording quality settings (movie) Image-recording quality settings (still photo) Video snapshot Miniature effect movie Movie digital zoom Automatically set/ISO Auto ISO speed Manual...
Page 311 Function Availability Table According to Shooting Mode Movies Still Photos Shooting Mode Focus mode AF+MF Movie Servo AF AF-assist beam Metering mode Program shift Exposure compensation Exposure AE lock Depth-of-field preview Single shooting Continuous shooting Drive/self-timer Q (10 sec.) mode l (2 sec.) q (Continuous) Aspect ratio...
Page 312: System Map
System Map 600EX-RT/ Macro Ring Lite Macro Twin Lite ST-E2* ST-E3-RT 90EX 270EX II 320EX 430EX II 600EX MR-14EX MT-24EX Bundled Accessories Neck Strap EM-100DB Neck Strap EM-E1 AC Adapter Kit Wrist Strap ACK-E12 ER-E1 Battery Pack Battery Charger LP-E12 LC-E12 or LC-E12E DC Coupler DR-E12...
Page 313 System Map Remote Controller GPS Receiver GP-E2 RC-6 EF lenses EF-S lenses EF-M lenses Mount Adapter EF-EOS M External microphone HDMI Cable HTC-100 (2.9 m/9.5 ft.) TV set/Video Stereo AV Cable AVC-DC400ST (1.3 m/4.3 ft.) PictBridge-compatible printer Interface Cable (1.3 m/4.3 ft.) Interface Cable IFC-200U/500U (1.9 m/6.2 ft.) / (4.7 m/15.4 ft.) Computer...
Page 314: Menu Settings
Menu Settings Still Photo B Shooting 1 (Red) Page v: CCreative Auto / 2Portrait / 3Landscape / 4Close-up / 5Sports / CKids / PFood / 6Night Portrait / Shooting mode* FHandheld Night Scene / GHDR Backlight Control w: d/ s/ f/ a 73/ 83/ 74/ 84/ 7a/ 8a/ b/ c/ Image quality 1+73/ 1...
Page 315 3 Menu Settings S Shooting 3 (Red) Page Exposure 1/3-stop or 1/2-stop increments, ±3 stops compensation/AEB (AEB: ±2 stops) AUTO / 100 / 200 / 400 / 800 / 1600 / 3200 / ISO speed 6400 / 12800 / H Max.: 400 / Max.: 800 / Max.: 1600 / ISO Auto Max.: 3200 / Max.: 6400...
Page 316 3 Menu Settings T Playback 1 (Blue) Page Select images / All images in folder / Protect images Unprotect all images in folder / All images on card / Unprotect all images on card Rotate image Rotate vertical images Select and erase images / All images in folder Erase images / All images on card Print order...
Page 317 3 Menu Settings m Set-up 1 (Yellow) Page Select folder Create and select a folder File numbering Continuous / Auto reset / Manual reset Auto rotate OnzD / OnD / Off Format card Initialize and erase data on the card Displayed when a commercially-available Eye-Fi settings Eye-Fi card is used.
Page 318 3 Menu Settings o Set-up 3 (Yellow) Page Enable / Touch to h / Disable Beep Screen color Select the shooting settings screen color Feature guide Enable / Disable Touch control Standard / Sensitive Auto cleaning: Enable / Disable Sensor cleaning Clean now Settings available when the GPS Receiver GPS device settings...
Page 319 3 Menu Settings Movies B Shooting 1 (Red) Page kMovie auto exposure / MMovie manual Shooting mode exposure 73/ 83/ 74/ 84/ 7a/ 8a/ b/ c/ Image quality 1+73/ 1 Grid display Off / Grid 1l / Grid 2m zHistogram Disable / Brightness / RGB display Release shutter...
Page 320 3 Menu Settings T Shooting 4 (Red) Page Custom White Manual setting of white balance Balance White balance shift/ WB correction: White balance correction bracketing BKT setting: White balance bracketing DAuto / PStandard / QPortrait / RLandscape /SNeutral / UFaithful / Picture Style VMonochrome / WUser Def.
Page 321 3 Menu Settings T Playback 1 (Blue) Page Select images / All images in folder / Protect images Unprotect all images in folder / All images on card / Unprotect all images on card Rotate image Rotate vertical images Select and erase images / All images in folder Erase images / All images on card Print order...
Page 322 3 Menu Settings n Set-up 2 (Yellow) Page LCD auto off: 15 sec. / 30 sec. / 1 min. / 3 min. / 5 min. / 10 min. / 30 min. Power saving Camera auto off: 0 sec. / 30 sec. / 1 min. / 3 min.
Page 323: Troubleshooting Guide
 Check that the battery charger is properly connected to the power outlet.  Do not recharge any battery pack other than a genuine Canon Battery Pack LP-E12. The battery charger’s lamp blinks.  If there is a problem with the battery charger, the protective circuit will stop the charging operation and the charge lamp will blink in orange.
Page 324 Troubleshooting Guide The battery becomes exhausted quickly.  Use a fully-charged battery pack (p.32).  The rechargeable battery pack performance will degrade with repeated use. If the battery loses power quickly, purchase a new one.  The number of possible shots will decrease with any of the following operations: •...
Page 325 Troubleshooting Guide Shooting-Related Problems No images can be shot or recorded.  Make sure the card is properly inserted (p.34).  Slide the card’s write-protect switch to the Write/Erase position (p.34).  If the card is full, replace the card or delete unnecessary images to make room (p.34, 254).
Page 326 Troubleshooting Guide When [FlexiZone - Multi] is set, it takes longer for the camera to focus automatically.  Depending on the shooting conditions, it may take longer to focus the subject. Use [FlexiZone - Single] or focus manually. During continuous shooting, the image on the LCD monitor seems to be out of focus.
Page 327 Troubleshooting Guide The maximum burst during continuous shooting is lower.  With <F> (Handheld Night Scene) or <G> (HDR Backlight Control) shooting mode, the maximum burst for continuous shooting will greatly decrease (p.85).  With ISO 12800 or “H” (equivalent to ISO 25600), the maximum burst for continuous shooting will greatly decrease (p.103).
Page 328 Troubleshooting Guide The Auto Lighting Optimizer cannot be set.  Under [54: Custom Functions (C.Fn)], if [3: Highlight tone priority] is set to [1: Enable], the Auto Lighting Optimizer cannot be set. If [0: Disable] is set, the Auto Lighting Optimizer can be set (p.289). Even though I set a decreased exposure compensation, the image comes out bright.
Page 329 Troubleshooting Guide High-speed sync cannot be set in the <f> mode.  Under [A2: External Speedlite control], set [Flash sync. speed in Av mode] to [Auto] (p.300). During shooting, a white <s> or red <E> icon is displayed.  It indicates that the camera’s internal temperature is high. If the white <s>...
Page 330 Troubleshooting Guide The exposure changes during movie shooting.  If you change the shutter speed or aperture during movie shooting, the changes in the exposure may be recorded.  Zooming the lens during movie shooting can cause changes in the exposure regardless of whether the lens’...
Page 331 Troubleshooting Guide Display Problems The menu screen shows few tabs and options.  With Scene Intelligent Auto, Basic Zone modes, and movie shooting modes, certain tabs and menu options are not displayed. Set the shooting mode to a Creative Zone mode (p.54). The file name’s first character is an underscore (“_”).
Page 332 Troubleshooting Guide [###] is displayed.  If the number of images in the card exceeds the maximum number of images that the camera can display, [###] will be displayed (p.235). The LCD monitor does not display a clear image.  If the LCD monitor is dirty, use a soft cloth to clean it.
Page 333 Troubleshooting Guide When the movie is played back, camera operation noise can be heard.  If you operate the camera’s dials or lens during movie shooting, the operation noise will also be recorded. Using an external microphone (commercially available) is recommended (p.201). The movie has still moments.
Page 334 Troubleshooting Guide Sensor Cleaning Problems The shutter makes a noise during sensor cleaning.  If you selected [Clean nowf], the shutter will make a noise, but no picture is taken (p.224). Automatic sensor cleaning does not work.  If you repeatedly switch the power to <1>/<2> at a short interval, the <f>...
Page 335: Error Codes
Clean the lens contacts.  Clean the electrical contacts on the camera and lens, use a Canon lens, or remove and install the battery pack again (p.22, 23, 34). Card cannot be accessed. Reinsert/change card or format card with camera.
Page 336: Specifications
* Compatible with UHS-I Image sensor size: Approx. 22.3 x 14.9 mm Compatible lenses: Canon EF-M, EF*, and EF-S* lenses * Mount Adapter EF-EOS M required. (35 mm-equivalent focal length is approx. 1.6 times the lens focal length) Lens mount: Canon EF-M mount •...
Page 337: Exposure Control
Specifications Noise reduction: Applicable to long exposures and high ISO speed shots Automatic image brightness correction: Auto Lighting Optimizer Highlight tone priority: Provided Lens aberration correction: Peripheral illumination correction, Chromatic aberration correction • Autofocus Type: Hybrid CMOS AF System (FlexiZone - Single, Face+Tracking, FlexiZone - Multi) AF points: 31 points (Max.)
Page 338: Drive System
JPEG Large/Fine: Approx. 13 (approx. 17) shots RAW: Approx. 5 (approx. 5) shots RAW+JPEG Large/Fine: Approx. 3 (approx. 3) shots * Figures are based on Canon’s testing standards (ISO 100 and “Standard” Picture Style) using an 8 GB card. * Figures in parentheses apply to a UHS-I compatible 8 GB card based on Canon’s testing standards.
Page 339 Specifications • Movie Shooting Recording format: Movie: MPEG-4 AVC/H.264 Variable (average) bit rate Audio: Linear PCM Recording size and frame rate: 1920x1080 (Full HD) : 30p/25p/24p 1280x720 (HD) : 60p/50p 640x480 (SD) : 30p/25p * 30p: 29.97 fps, 25p: 25.00 fps, 24p: 23.98 fps, 60p: 59.94 fps, 50p: 50.00 fps File size: 1920x1080 (30p/25p/24p) : Approx.
Page 340: Lcd Monitor
Specifications • LCD Monitor Type: TFT color, liquid-crystal monitor Monitor size and dots: Wide, 7.7 cm (3.0 in.) (3:2) with approx. 1.04 million dots Brightness adjustment: Manual (7 levels) Interface languages: Feature guide: Displayable • Playback Image display formats: Single image display, Single image + Info display (Basic info, shooting info, histogram), image index (4/ 9/36/100), image rotate possible Zoom magnification:...
Page 341: Dimensions And Weight
Specifications • Interface Audio/video OUT/ Digital terminal: Analog video (compatible with NTSC/PAL) / stereo audio output Computer communication and direct printing (Hi- Speed USB equivalent), GPS receiver GP-E2 connection HDMI mini OUT terminal: Type C (auto switching of resolution), CEC-compatible External microphone IN terminal: 3.5 mm diameter stereo mini-jack...
Page 342 Weight: Approx. 76 g / 2.7 oz. (excluding power cord)  All the data above is based on Canon’s testing standards and CIPA (Camera & Imaging Products Association) testing standards and guidelines.  Dimensions, maximum diameter, length and weight listed above are based on CIPA Guidelines (except weight for camera body only).
Page 343 Specifications Trademarks  Adobe is a trademark of Adobe Systems Incorporated.  Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.  Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
Page 344 This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
Page 345 Safety Warnings Follow these safeguards and use the equipment properly to prevent injury, death, and material damage. Preventing Serious Injury or Death • To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below: - Do not use any batteries, power sources, and accessories not specified in this booklet. Do not use any home-made or modified batteries.
Page 346 • Do not use paint thinner, benzene, or other organic solvents to clean the equipment. Doing so may cause fire or a health hazard. If the product does not work properly or requires repair, contact your dealer or your nearest Canon Service Center.
Page 347 If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon Park, Melville, NY 11747, U.S.A. Tel No. 1-800-OK-CANON (1-800-652-2666) CAN ICES-3 (B) / NMB-3 (B) When connecting to and using a household power outlet, use only AC Adapter Kit ACK-E12 (rated input: 100-240 V AC 50/60 Hz, rated output: 7.4...
Page 348 4. Do not expose the charger to rain or snow. 5. Use of an attachment not recommended or sold by Canon may result in fire, electric shock, or personal injury.
Page 349: Downloading Images To Your Computer
Software Start Guide / Downloading Images to Your Computer This chapter explains the following:  Overview of the software for EOS DIGITAL cameras  How to download and install the software on your computer  How to download and view the Software Instruction Manual PDFs ...
Page 350: Software Start Guide
Software Start Guide Software Overview This section explains an overview of various software applications for EOS DIGITAL cameras. Internet connection is required to download and install the software. Download and installation are not possible in environments with no Internet connection. EOS Utility With the camera connected to a computer, EOS Utility enables you to transfer still photos and movies shot with the camera to the computer.
Page 351 (The newer version will overwrite the previous version.) Download the software.  Connect to the Internet from a computer and access the Canon Web site at the following URL. http://www.canon.com/icpd/ ...
Page 352: Downloading And Viewing The Software Instruction Manual Pdfs
Internet connection is required to download the Software Instruction Manual PDFs. Download is not possible in environments with no Internet connection. Download the Software Instruction Manual PDFs.  Connect to the Internet from a computer and access the Canon Web site at the following URL. http://www.canon.com/icpd/ ...
Page 353: Downloading Images To A Computer
Downloading Images to a Computer You can use EOS software to download the images in the camera to your computer. There are two ways to do this. Download by Connecting the Camera to the Computer Install the software (p.351). Use the provided interface cable to connect the camera to your computer.
Page 354 Downloading Images to a Computer Downloading Images with a Card Reader If you have a commercially-available card reader, you can use it to download images to your computer. Install the software (p.351). Insert the card into the card reader. Use EOS software to download the images/movies.
Page 355 MEMO...
Page 356 MEMO...
Page 357: Index
Index Numerics Battery check........39 Beeper ..........208 10-sec. or 2-sec. delay......126 Black-and-white image ..87 1280x720 (movie) ......185 Bracketing........150 1920x1080 (movie) ......185 Brightness (exposure) ....148 640x480 (movie) .......185 Auto exposure bracketing ........150 (AEB) ....152 Autoexposure lock (AE lock) A (Scene Intelligent Auto) ....64 ....148 Exposure compensation AC Adapter Kit ........294...
Page 358 Index Continuous shooting......124 Feature guide ........62 Contrast..........164 FEB (flash exposure bracketing) ..303 Copyright information ......216 File extension ........215 Creative Auto........71 File name.......... 214 Creative filters ......128 File size ....... 98 Creative Zone modes ......27 Fill flash ..........302 Cropping........
Page 359 Index ..........252 Formatting (card initialization) .....57 Protect ..........234 Rating Frame rate.........185 Review time ........209 Full Auto (Scene Intelligent Auto)..64 ......256 Shooting information Full High-Definition (Full HD) ..185 ........243 Slide show ..........305 Transfer Function availability ......237 Viewing on TV by shooting mode......308 Image area ..........45 Image dust prevention ....224 Grainy B/W........130...
Page 360 ......155 ..........314 Settings ......157 Long exposures 3 icon ..........8 Nomenclature ........23 Metering mode ........146 Non-Canon flash units ...... 298 MF (Manual focusing)......120 Normal (image-recording quality)....26 Microphone........48 NTSC......... 185 Miniature effect........131 Miniature effect movie .......189 Mode Dial ..........27 ONE SHOT (One-Shot AF) ....
Page 361 Index PictBridge..........267 Picture Style ...... 106 Safety warnings .........345 Pixels...........97 Saturation ..........164 Playback........92 Scene icons .........68 Portrait......... 76 Scene Intelligent Auto....27 SD, SDHC, SDXC card 9 Card Possible shots ....... 39 Power Second-curtain synchronization ..302 ........39 Battery check Self-timer ...........126 Camera auto off ......210 Sensor cleaning.........224...
Page 362 Index Software ........ 5 Wi-Fi ........... 13 Speaker ..........239 Wind filter.......... 202 Sports ..........79 Wireless flash shooting..... 301 Spot metering ........147 sRGB..........173 Stopped-down aperture .....142 Strap ............30 System map ........312 Tap ............59 Temperature warning....132 Time zone..........41 Tone priority........289 Toning effect (Monochrome)....165 Touch beeping ........61 Touch screen ......
Page 363 MEMO...
Page 364 The lenses and accessories mentioned in this Instruction Manual are current as of October 2013. For information on the camera’s compatibility with any lenses and accessories introduced after this date, contact any Canon Service Center. CPX-E068-000 © CANON INC. 2013...

This manual is also suitable for:

Eos m2w

Canon EOS M2 Instruction Manual

Table of Contents

Table of Contents

Getting Started

Basic Shooting and Image Playback

Creative Shooting

Advanced Shooting

Shooting Movies

Handy Features

Image Playback

Post-Processing Images

Printing Images

Customizing the Camera

Custom Functions

1 Exposure Level Increments

2 ISO Expansion

C.fn II: Image

3 Highlight Tone Priority

C.fn III: Autofocus

C.fn IV: Operation/Others

4 AF-Assist Beam (LED) Firing

5 Shutter/Ae Lock Button

40 XL Button Function

Reference

Movie Shooting

Downloading Images to Your Computer

Quick Links

Chapters

Related Manuals for Canon EOS M2

Summary of Contents for Canon EOS M2