• Heat Gun / Blow Dryer This guide will show you how to completely disassemble the Samsung Galaxy Note 3 smartphone, assisting in making the DIY repair of the device both simple, and safe. Following the comprehensive steps we have provided will help you quickly replace not only a broken Note 3 display assembly, but also any other internal components that may have become faulty or damaged.
Loud Speaker The SIM card and the microSD card should now both be easily accessible, remove them from the Galaxy Note 3. Next, locate and remove the twelve small Phillips screws (#00) that secure the rear housing and loudspeaker to the front housing and display assembly.
Page 3
Samsung Galaxy Note 3 (SM-N900T) – Disassemble Guide Slide the stylus pen out of its location and remove it from the smartphone. The rear housing and loudspeaker can be removed using your curved tweezers. Begin the separation toward the bottom of the smartphone and work around the entire perimeter releasing the clips and removing the rear housing.
Samsung Galaxy Note 3 (SM-N900T) – Disassemble Guide You can now remove the motherboard from the Note 3. Carefully maneuver it around the released connections and lift it away from the smartphone. Rear-Facing Camera With your fine tip curved tweezers, remove the rear-facing camera by prying up and releasing the cable on the bottom side of the motherboard.
Page 5
The dock connector assembly is held in place by adhesive, with your nylon spudger gently pry it up and remove it from the Galaxy Note 3 (the use of a heat gun is optional to soften the adhesive). Display Assembly (LCD & Touch Screen Digitizer) At this time, the display assembly (LCD &...
Page 6
Samsung Galaxy Note 3 (SM-N900T) – Disassemble Guide Next, to begin the separation of the display assembly from the front housing/frame, use a small screwdriver and through the front-facing camera hole push the damaged display away from the front housing/frame.