Page 1
A.C. 1 1 5 V 6 0 H z Note: Specifications may differ from country t o country. Makita battery 122 is a lead-acid battery. Be sure to follow the following instructions to charge it. 1) Always charge it immediately after purchase.
Make sure tirmmer switch is off when clearing jamed material from blades. Do not grasp the exposed cutting blades or cutting edges when picking up or holding the hedge trimmer. Caution blades coast after turn off.
Page 3
Then inspect it. 28. When not in use, always disconnect the battery from the hedge trimmer and cover the blades with the blade guard (blade cover). damaged. Keep handles dry, clean,...
To reduce risk of electric shock, unplug charger from outlet before attempt- ing any maintenance or cleaning. Turning off controls will not reduce this risk. battery, and product using battery. injury, charge only MAKITA battery it will not be stepped on, tripped over, TABLE BATTERY CHARGERS...
Page 5
ADDITIONAL SAFETY RULES FOR BATTERY Always charge the Makita battery Always recharge the Makita battery Be sure t o charge the Makita battery months, when not using unchargeable. 4. Use only the Makita charger Model Makita battery 5. Do not charge inside a box or container of any kind.
Page 6
15. Stop charging immediately if you notice anything abnormal. Ship or take the charger and the battery t o your nearest Makita Service Center or Distributor for checking them. 16. Do not attempt t o disassemble or make modifications t o the charger.
Page 7
Ship or take the charger and the battery to your nearest Makita Service Center or Distributor for checking.
Page 8
Switch action To prevent the trigger from being acciden- tally pulled, a lock-off lever To start the tool, slide the lock-off lever in the direction of the arrow and pull the trigger. the trigger to stop. Release CAUTION: Before connecting the battery to the tool, always check to see that the switch trigger actuates properly and returns to the "OFF"...
Page 9
Operation Do not attempt to cut branches thicker than 8 mm (5/16") diameter with this trimmer. These should first the cut with shears down to the hedge trimming level. Hold the tool firmly with both hands. Switch on the tool without the blades making any contact.
Page 10
To cut a hedge side evenly, from the bottom upwards. Trim boxwood or rhododendron from the base toward the top for nice appearance and good job. CAUTION: Keep hands away from blades. Be careful not to accidentally contact a metal fence or other hard objects while trim- ming.
To maintain product SAFETY and RELlABl LITY, repairs, maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. switched battery nail or hook.
Page 12
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Page 13
Dec -19-'94 mm (11-3/4") BATTERY-POWERED HEDGE TRIMMER Model UH303D Note: The switch and other part configurations may differ from country t o country.
Page 14
UH303D MODEL ' ; " O M DESCRIPTION MACHINE Name Plate Housing (With Item sponge Sea1 Shaft Helical Gear 52 Plate Crank Urethan Sleeve Guard Hex N u t M 4 - 1 0 Gear 1 4 - 3 4...
Page 16
MAKITA LIMITED ONE YEAR WARRANTY Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.