Dial Tone; Tone Frequencies; Tone Timings; Busy Tone - Panasonic KX-HDV130 Administrator's Manual
Sip phone
Hide thumbs
Also See for KX-HDV130:
- Manual (388 pages) ,
- Administrator's manual (332 pages) ,
- Operating instructions manual (116 pages)
Table of Contents
Advertisement
4.6.5.1 Dial Tone
Tone Frequencies
Description
Value Range
Default Value
Configuration File Reference
Tone Timings
Description
Value Range
Default Value
Configuration File Reference
4.6.5.2 Busy Tone
Tone Frequencies
Description
Document Version 2015-02
Specifies the dual-tone frequencies, in hertz, of dial tones using 2 whole
numbers separated by a comma.
0, 200–2000 (0: No tone)
Note
•
If the value for this setting is "350,440", the unit will use a mixed
signal of a 350 Hz tone and a 440 Hz tone.
350,440
DIAL_TONE1_FRQ (Page 277)
Specifies the pattern, in milliseconds, of dial tones using up to 10 whole
numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
The unit will not play the tone for the duration of the first value,
play it for the duration of the second value, stop it for the
duration of the third value, play it again for the duration of the
fourth value, and so on. The whole sequence will then repeat.
For example, if the value for this setting is "100,100,100,0", the
unit will not play the tone for 100 ms, play it for 100 ms, stop it
for 100 ms, and then play it continuously.
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
60,0
DIAL_TONE1_TIMING (Page 278)
Specifies the dual-tone frequencies, in hertz, of busy tones using 2
whole numbers separated by a comma.
4.6.5 Tone Settings
Administrator Guide
147
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
