Table of Contents
Advertisement
Quick Links
fi-7030
Operator's Guide
Thank you for purchasing our image scanner.
This manual explains about the basic operations and handling of the scanner.
For information on scanner installation and connection, refer to the Quick Installation Sheet.
P3PC-5992-02ENZ0
Explains the names and functions of parts
and basic scanner operation.
Explains how to load documents on the
scanner.
Explains how to use the operator panel.
Explains about various ways of scanning.
Explains how to clean the scanner.
Explains how to replace the consumables.
Explains about troubleshooting.
Explains how to configure settings in the
Software Operation Panel.
How to Use This Manual
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
Advertisement
Chapters
Table of Contents
Troubleshooting
Related Manuals for Fujitsu Fi-7030
Summary of Contents for Fujitsu Fi-7030
- Page 1 P3PC-5992-02ENZ0 Contents Index fi-7030 Introduction Explains the names and functions of parts Scanner and basic scanner operation. Overview Operator's Guide Explains how to load documents on the How to Load scanner. Documents Explains how to use the operator panel. How to Use the Thank you for purchasing our image scanner.
-
Page 2: How To Use This Manual
How to Use This Manual Contents How to Use This Manual Index Introduction Scanner The following shows the tips for using this manual. - Contents Page Overview ® ® To display or print this manual, either Adobe Acrobat (7.0 or later) ®... -
Page 3: Introduction
Introduction Contents Introduction Index Introduction Scanner Thank you for purchasing our image scanner. Manual Description Overview About This Product Scanner Central Admin Explains about the overview, installation, User's Guide (PDF) operation and maintenance of Scanner How to Load This scanner realizes a scanning speed of 27 ppm/54 ipm Central Admin. - Page 4 Introduction Contents Trademarks Index Microsoft, Windows, Windows Server, Windows Vista, Excel, Introduction and SharePoint are either registered trademarks or trademarks of Microsoft Corporation in the United States and/ Scanner or other countries. Overview Word is the product of Microsoft Corporation in the United States.
-
Page 5: Conventions
Conventions Contents Conventions Index Introduction Scanner Safety Information Abbreviations Used in This Manual Overview The attached "Safety Precautions" manual contains important The operating systems and products in this manual are information about the safe and correct use of this product. indicated as follows. - Page 6 Conventions Contents Arrow Symbols in This Manual Name Indication Index Right-arrow symbols () are used to separate icons or menu ® Windows Windows Server 2012 R2 Standard (64-bit) Introduction Server 2012 options you should select in succession. R2 (*1) Example: Click [Start] menu [Control Panel]. Scanner ®...
-
Page 7: Table Of Contents
Contents Contents Contents Index Introduction Scanner How to Use This Manual ........................... 2 Overview Introduction ................................ 3 Conventions ............................... 5 How to Load Documents Chapter 1 Scanner Overview ........................13 Main Features ................................14 How to Use the Parts and Functions ..............................15 Operator Panel Front .................................... -
Page 8: Operational
Contents Contents Chapter 2 How to Load Documents ......................32 Index Loading Documents ..............................33 Introduction Preparation..................................33 How to Load Documents ..............................34 Scanner Documents for Scanning ............................35 Overview Paper Size..................................35 How to Load Conditions ..................................35 Documents Loading Capacity................................ -
Page 9: Operational
Contents Contents Customizing the Scanner Settings ..........................57 Index Using a Button on the Scanner to Start Scanning......................57 Introduction Ignoring Multifeed for a Set Pattern..........................59 Chapter 5 Daily Care ............................. 62 Scanner Overview Cleaning Materials and Locations that Require Cleaning ..................63 Cleaning Materials................................ - Page 10 Contents Contents Images are distorted or not clear............................ 91 Index Vertical streaks appear on the scanned image......................92 Introduction An error ("E" or other letter or number) is already displayed in the Function Number Display after power-on....93 Multifeed error occurs frequently.
- Page 11 Contents Contents Settings Related to Sheet Counters ........................122 Index Checking and Resetting the Sheet Counters ....................... 122 Introduction Scanner Cleaning Cycle [Cleaning Cycle]........................124 Replacement Cycle of Consumables [Life Counter Alarm Setting] ................125 Scanner Settings Related to Scanning ........................... 126 Overview Adjusting the Position to Start the Scan [Offset/Vertical Magnification Adjustment] ............
-
Page 12: Operational
Contents Contents Scanner Options ................................ 148 Index Uninstalling the Software ............................149 Introduction Contact for Inquiries ........................... 150 Glossary ............................... 151 Scanner Index ................................161 Overview How to Load Documents How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables... -
Page 13: Chapter 1 Scanner Overview
Contents Index Chapter 1 Scanner Overview Introduction Scanner Overview How to Load This chapter explains about the names and functions of the scanner components, as well as the methods for basic Documents operations. How to Use the 1.1 Main Features.............................14 Operator Panel 1.2 Parts and Functions............................15 1.3 Turning the Power ON/OFF........................19... -
Page 14: Main Features
Chapter 1 Scanner Overview Contents Index 1.1 Main Features Introduction This section explains about the main features of this product. Capable of scanning photographs, clippings, and Scanner documents larger than A4/Letter size The scanner is equipped with the following features: Overview The Carrier Sheet, which is available as an option, allows you to scan Scanning speed of 27 ppm/54 ipm (*1) -
Page 15: Parts And Functions
Chapter 1 Scanner Overview Contents Index 1.2 Parts and Functions Introduction This section shows the names of the scanner parts. Scanner Front Overview Chute Extension 1 Pull out to adjust to the document length. How to Load Side Guides Documents Positions the documents in place when the documents are loaded in the ADF paper chute Chute Extension 2... -
Page 16: Back
Chapter 1 Scanner Overview Contents Back Index Ventilation Port Introduction Holes for ventilating hot air from inside the scanner. Scanner Overview Power Connector Used to connect the power cable. How to Load "Power cable" refers to the AC cable and AC adapter connected together. Documents How to Use the Security Cable Slot... -
Page 17: Removable Parts
Chapter 1 Scanner Overview Contents Removable Parts Index Pick Roller Introduction Scanner Overview How to Load Documents How to Use the Operator Panel ADF Paper Chute (Feeder) Various Ways to Scan Daily Care Replacing the Consumables Brake Roller Troubleshooting Operational Settings Appendix Glossary... -
Page 18: Inside (Adf)
Chapter 1 Scanner Overview Contents Inside (ADF) Index Glass (× 2) Introduction Ultrasonic Sensor (× 2) Scanner Overview Brake Roller (× 2) How to Load Documents How to Use the Document Sensor Operator Panel Plastic Idler Roller (× 4) Various Ways to Scan Daily Care Replacing the... -
Page 19: Turning The Power On/Off
Chapter 1 Scanner Overview Contents Index 1.3 Turning the Power ON/OFF Introduction How to Turn the Power ON This section explains how to power on/off the scanner. Scanner HINT Overview The method by which the scanner is powered on/off can be specified Press the [Power] button on the operator panel. -
Page 20: How To Turn The Power Off
Chapter 1 Scanner Overview Contents How to Turn the Power OFF Index Introduction Press the [Power] button on the operator panel for more than 2 seconds. Scanner The scanner is turned off, and the [Power] button switches off. Overview How to Load Documents How to Use the... -
Page 21: Opening/Closing The Adf
Chapter 1 Scanner Overview Contents Index 1.4 Opening/Closing the ADF Introduction How to Close the ADF This section describes how to open and close the ADF. Scanner How to Open the ADF Overview Close the ADF. Remove all documents from the ADF paper chute Push the center of the ADF until it locks in place. -
Page 22: Setting Up The Adf Paper Chute (Feeder)
Chapter 1 Scanner Overview Contents Index 1.5 Setting Up the ADF Paper Chute (Feeder) Introduction When you start a scan, documents that are loaded in the ADF Scanner paper chute (feeder) are fed into the ADF one by one. Overview Using the chute extensions will keep the documents straight and feed them smoothly. -
Page 23: Setting Up The Stacker
Chapter 1 Scanner Overview Contents Index 1.6 Setting Up the Stacker Introduction When you start a scan, documents that are loaded in the ADF Bring down the stacker from the top towards you. Scanner paper chute (feeder) are ejected onto the stacker one by one. Overview Using the stacker and stacker extension will keep the documents straight and stack them neatly. -
Page 24: Operational
Chapter 1 Scanner Overview Contents Slide out the stacker extension towards you. Index Introduction Scanner Overview How to Load Documents How to Use the Operator Panel Stacker Extension Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings Appendix Glossary... -
Page 25: Power Saving Mode
Chapter 1 Scanner Overview Contents Index 1.7 Power Saving Mode Introduction Power saving mode keeps the power consumption low when ATTENTION Scanner the scanner has not been used for a certain period of time. The scanner may not enter power saving mode if there is a Overview document remaining on the paper path. -
Page 26: Basic Flow Of Scanning Operation
Chapter 1 Scanner Overview Contents Index 1.8 Basic Flow of Scanning Operation Introduction This section explains about the basic flow of performing a Scanning procedures and operations slightly vary depending Scanner scan. on the image scanning application. Overview In order to perform a scan, you need a scanner driver and an For details, refer to the image scanning application manual. -
Page 27: Windows
Chapter 1 Scanner Overview Contents Select a scanner. Index Make sure to select the scanner model that is connected to the computer. Introduction For some image scanning applications, selection of a scanner may not be needed. Scanner Overview In the setup window for the scanner driver, configure the scan settings. -
Page 28: Bundled Software
Chapter 1 Scanner Overview Contents Index 1.9 Bundled Software Introduction Overview of Bundled Software dedicated to ScanSnap Manager for fi Series. PaperStream IP (TWAIN) is required for this application. Using this application makes Scanner it easy to create an image file (a PDF, JPG, or searchable PDF file) The following softwares are bundled with this product: Overview with a single button. -
Page 29: System Requirements
Chapter 1 Scanner Overview Contents System Requirements Operating ® Windows 8.1 (32-bit/64-bit) (including updates) (*1) Index system ® The system requirements are as follows: Windows 8.1 Pro (32-bit/64-bit) (including updates) Introduction (*1) Operating ® ® Windows Vista Home Basic (32-bit/64-bit) (Service ... -
Page 30: Installing The Bundled Software
Chapter 1 Scanner Overview Contents Installing the Bundled Software HINT Index If the [fi Series Setup] window does not appear, open [Explorer] or This section explains about the procedure to install the [Computer] and double-click [Setup.exe] in the Setup DVD-ROM. Introduction software from the bundled Setup DVD-ROM. -
Page 31: Operational
Chapter 1 Scanner Overview Contents ■Installation (Custom) Index In the same way as in "Installation (Recommended)" Introduction (page 30), perform steps through 2. Scanner Click the [Installation (Custom)] button. Overview How to Load Documents How to Use the Operator Panel Various Ways to Scan Daily Care... -
Page 32: How To Load Documents
Contents Index Chapter 2 How to Load Introduction Documents Scanner Overview How to Load Documents This chapter explains how to load documents on the scanner. How to Use the Operator Panel 2.1 Loading Documents............................33 Various Ways to 2.2 Documents for Scanning ..........................35 Scan Daily Care Replacing the... -
Page 33: Preparation
Chapter 2 How to Load Documents Contents Index 2.1 Loading Documents Introduction This section explains how to load documents. Fan the documents. Scanner 1 Grab a stack of documents, which should be 5 mm or less. Preparation Overview 2 Hold both ends of the documents and fan them a few times. How to Load HINT For details about the paper size and quality required for normal... -
Page 34: Operational
Chapter 2 How to Load Documents Contents How to Load Documents Adjust the side guides to the width of the documents. Index Do not leave space between the side guides and the documents. Otherwise, the documents may be fed skewed. Introduction Pull out the chute extensions according to the length of the documents. -
Page 35: Operational
Chapter 2 How to Load Documents Contents Index 2.2 Documents for Scanning Introduction Paper Size Conditions Scanner Overview The following paper sizes can be scanned: Paper Type The following paper types are recommended: How to Load Maximum size (width × length) ... -
Page 36: Operational
Chapter 2 How to Load Documents Contents The following types of documents must not be scanned: When you scan plastic cards, take note of the following: Index Paper-clipped or stapled documents - Plastic cards should be within the following specifications: ... -
Page 37: Operational
Chapter 2 How to Load Documents Contents HINT Index When scanning semi-transparent documents, increase the Introduction brightness for scanning in the scanner driver to avoid bleed-through. When you scan documents written in lead pencil, make sure to clean the rollers frequently. -
Page 38: Operational
Chapter 2 How to Load Documents Contents Loading Capacity Index The number of sheets that can be loaded in the ADF paper chute (feeder) is determined by the paper size and paper weight. See Introduction the graph below. Scanner A4 size Overview How to Load Capacity... -
Page 39: Operational
Chapter 2 How to Load Documents Contents Area Not to Be Perforated Conditions for Multifeed Detection Index An error may occur when there are punched holes in the area Multifeed is an error where two or more sheets are fed through Introduction shaded in light blue in the figure below. -
Page 40: Operational
Chapter 2 How to Load Documents Contents Fig. 2 HINT Index Accuracy of multifeed detection may drop with some documents. Reference point Multifeed cannot be detected for the top 30 mm of a document. Introduction For the shaded area in "Fig. -
Page 41: Operational
Chapter 2 How to Load Documents Contents Conditions for Mixed Batch Scanning Paper Size Index When you scan a mixed batch with different sizes, not feeding the The following conditions apply when a mixed batch of documents straight may cause troubles such as paper jams or part of Introduction the image to appear missing. -
Page 42: Operational
Chapter 2 How to Load Documents Contents Combinations of Standard Paper Sizes in a Mixed Batch Index Refer to the table below for a guideline of the range available for mixed batch scanning. Introduction However, note that not feeding the documents straight may cause troubles such as paper jams or part of the image to appear missing. It is recommended that you check the documents thoroughly before scanning and also check the image if the document was skewed. -
Page 43: Operational
Chapter 2 How to Load Documents Contents Conditions for Automatic Page Size Detection *1: The figure below shows how to load the widest and the narrowest Index documents of the batch between the side guides. Center [Automatic Page Size Detection] does not work with the Introduction following types of documents: Maximum width... -
Page 44: Operational
Chapter 2 How to Load Documents Contents Conditions for Using the Carrier Sheet Depending on the amount of memory used by running applications, Index there may be insufficient memory to scan a double-page spread document with the Carrier Sheet in high resolution. In that case, ■... -
Page 45: How To Use The Operator Panel
Contents Index Chapter 3 How to Use the Introduction Operator Panel Scanner Overview How to Load Documents This chapter explains how to use the operator panel. How to Use the Operator Panel 3.1 Operator Panel ............................46 Various Ways to Scan Daily Care Replacing the Consumables... -
Page 46: Operational
Chapter 3 How to Use the Operator Panel Contents Index 3.1 Operator Panel Introduction The operator panel consists of a Function Number Display, buttons and LED indicator. Scanner Names and Functions Overview LED Indicator How to Load Lights in orange when an error occurs. Documents Flashes when the ADF is open. -
Page 47: Operational
When this alarm occurs, turn the power off then back on. If Documents Ready to start scanning. the problem still persists, contact your FUJITSU scanner Indicates that the initialization was successfully completed dealer or an authorized FUJITSU scanner service provider. -
Page 48: Operational
Contents Index Chapter 4 Various Ways to Scan Introduction Scanner Overview How to Load This chapter explains how to configure scanner settings and scan different types of documents with the image scanning Documents application. How to Use the 4.1 Summary ..............................49 Operator Panel 4.2 Scanning Documents of Different Types and Sizes..................50 4.3 Advanced Scanning............................56... -
Page 49: Advanced Scanning
Chapter 4 Various Ways to Scan Contents Index 4.1 Summary Introduction The following lists the main ways of scanning documents: Scanner Scanning Documents of Different Types and Sizes Overview "Documents with Different Widths" (page 50) "Documents Larger than A4 Size" (page 51) How to Load "Scanning Photographs and Clippings"... -
Page 50: Documents With Different Widths
Chapter 4 Various Ways to Scan Contents Index 4.2 Scanning Documents of Different Types and Sizes Introduction Documents with Different Widths ATTENTION Scanner Make sure that all documents are placed underneath the pick Overview roller. Otherwise, some documents may be skewed or not fed into ATTENTION the ADF. -
Page 51: Operational
Chapter 4 Various Ways to Scan Contents Documents Larger than A4 Size Adjust the stacker to fit the longest document. Index For details, refer to "Setting Up the Stacker" (page 23). The Carrier Sheet can be used to scan documents larger than Introduction In the scanner driver, configure the scan settings to detect A4/Letter size, such as A3 or B4. -
Page 52: Operational
Chapter 4 Various Ways to Scan Contents 2 Place the document inside the Carrier Sheet. Load the Carrier Sheet face-down with the end which has Index Align the fold line with the right edge of the Carrier Sheet so that the black and white pattern placed as the leading edge in the document fits in the upper right-hand corner. -
Page 53: Operational
Chapter 4 Various Ways to Scan Contents Scanning Photographs and Clippings The images of the front and back are merged into a single image. Index Using the Carrier Sheet allows you to scan documents that Introduction can be damaged quite easily such as photographs, or Scanner documents that are difficult to load directly such as newspaper Overview... -
Page 54: Operational
Chapter 4 Various Ways to Scan Contents Load the Carrier Sheet face-down with the end that has ATTENTION Index the black and white pattern placed as the leading edge in The image is output at the center of the page in the size the ADF paper chute (feeder), as shown below. -
Page 55: Long Page Scanning
Chapter 4 Various Ways to Scan Contents Long Page Scanning - Removing Index Secure enough space around the stacker to prevent the Documents with a length up to 5,588 mm (220 in.) can be ejected sheet from falling off the stacker. Introduction scanned by long page scanning. -
Page 56: Operational Settings
Chapter 4 Various Ways to Scan Contents Index 4.3 Advanced Scanning Introduction Feeding Documents Manually in the ADF Scan the document with the image scanning application. Scanner For details, refer to the image scanning application manual. Overview Documents can also be loaded manually one sheet at a time After the document is scanned, the rollers inside the ADF keep rotating, waiting for the next document to be loaded for the time in the ADF. -
Page 57: Using A Button On The Scanner To Start Scanning
Chapter 4 Various Ways to Scan Contents Index 4.4 Customizing the Scanner Settings Introduction Using a Button on the Scanner to Start Scanning Right-click on the scanner icon, and select [Scan Scanner properties] from the displayed menu. Overview The properties window of the scanner appears. The [Scan/Stop] button and the [Send to] button on the operator panel can be configured to perform scanning by Click the [Events] tab and select an event. -
Page 58: Operational
Chapter 4 Various Ways to Scan Contents Select an action and an application to be launched by the Scanner Setup Index scanner button event. Click [Start this program] under [Actions], and select an application Introduction Check from the drop-down list on the right. Scanner Function [Send to] Button... -
Page 59: Operational
Chapter 4 Various Ways to Scan Contents Ignoring Multifeed for a Set Pattern Intelligent Multifeed Function Index The following three modes are available: If you attempt to scan a document with an attachment such as Introduction Mode Description sticky note, receipt, or photo while multifeed detection is Scanner Manual mode Checks for any paper attached every time a... -
Page 60: Operational
Chapter 4 Various Ways to Scan Contents Preparation Before Using This Function If you open the ADF to remove the document, close it. Index For details, refer to "1.4 Opening/Closing the ADF" (page 21). Before using this function, configure [Check Overlapping (Ultrasonic)] or [Check Overlapping and length] for multifeed detection method by When the ADF is closed, indication on the function number display of Introduction... -
Page 61: Operational
Chapter 4 Various Ways to Scan Contents Press the [Function] button and confirm that the function Index number flashing is faster, and then either press the [Scan/Stop] Introduction button or perform a scan from the computer. From this point, note that the function number flashing speed switches between "slower"... -
Page 62: Operational
Contents Index Chapter 5 Daily Care Introduction Scanner Overview How to Load This chapter describes how to clean the scanner. Documents Do not use aerosol spray or spray that contains alcohol. Paper How to Use the dust blown up by strong air from the spray may enter inside the Operator Panel scanner which may cause the scanner to fail or malfunction. -
Page 63: Operational
Notes For more information about the cleaning materials, contact How to Load Cleaner F1 PA03950- 100 ml your FUJITSU scanner dealer or an authorized FUJITSU Documents 0352 Moisten a cloth or Cleaning scanner service provider. Paper with this liquid to wipe the scanner clean. -
Page 64: Operational
Chapter 5 Daily Care Contents Location and Frequency Index Introduction Location Frequency Scanner Brake roller Every 3,000 sheets Overview Pick roller Plastic idler roller How to Load Documents Glass Ultrasonic sensor How to Use the Feed roller Operator Panel Eject roller Various Ways to Scan ATTENTION... -
Page 65: How To Load Documents
Chapter 5 Daily Care Contents Index 5.2 Cleaning the Outside Introduction The outside of the scanner, including the ADF paper chute Scanner (feeder) and the stacker, should be cleaned with either a piece Overview of dry cloth, a cloth moistened with Cleaner F1/mild detergent, or a sheet of Cleaning Wipe. -
Page 66: Operational
Chapter 5 Daily Care Contents Index 5.3 Cleaning the Inside Introduction Cleaning the ADF (with Cleaning Paper) Load the Cleaning Paper in the ADF paper chute (feeder). Scanner Overview The ADF can be cleaned with a sheet of Cleaning Paper moistened with Cleaner F1. -
Page 67: Operational
Chapter 5 Daily Care Contents Cleaning the ADF (with Cloth) Start an application available for scanning and scan the Index Cleaning Paper. The Cleaning Paper is fed and ejected onto the stacker. The ADF can be cleaned with a piece of cloth moistened with Introduction Cleaner F1, or a sheet of Cleaning Wipe. -
Page 68: Operational
Chapter 5 Daily Care Contents Open the ADF. Clean the following locations with a cloth moistened with Index Cleaner F1 or a sheet of Cleaning Wipe. For details, refer to "1.4 Opening/Closing the ADF" (page 21). Ultrasonic Sensor (× 2) Introduction Plastic Idler Roller When the ADF is open, it might close... -
Page 69: Operational
Chapter 5 Daily Care Contents Brake Roller (× 2) Plastic Idler Roller (× 4) Index Remove the roller from the scanner. Gently wipe off any dirt or dust as you rotate the roller manually, taking For details about removing the brake roller, refer to "6.2 Replacing the care not to damage the roller surface. -
Page 70: Operational
Chapter 5 Daily Care Contents 3 When you press the [Send to] and [Scan/Stop] buttons on the Reset the counter for the scanned sheets after cleaning in Index operator panel at the same time, the feed/eject rollers rotate a the Software Operation Panel. certain amount. -
Page 71: Cleaning The Carrier Sheet
The Carrier Sheet should be replaced approximately every 500 scans. Replacing the For information on purchasing the Carrier Sheet, contact your Consumables FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Troubleshooting Operational Settings Appendix Glossary... -
Page 72: Chapter 6 Replacing The Consumables
Contents Index Chapter 6 Replacing the Introduction Consumables Scanner Overview How to Load Documents This chapter describes how to replace the consumables for the scanner. How to Use the Operator Panel The inside of the ADF becomes very hot when the scanner is being used. -
Page 73: Consumables
Daily Care HINT Only use the specified consumables. Replacing the Consumables To purchase the consumables, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Troubleshooting Operational Settings Appendix Glossary... -
Page 74: Operational
Chapter 6 Replacing the Consumables Contents Index 6.2 Replacing the Roller Set Introduction The Roller Set consists of the brake roller and the pick roller. Replace the brake roller. Scanner 1 Open the cover. Replace each roller in the following procedure. Overview Hold both ends of the cover, and open it in the direction of the arrow. -
Page 75: Operational
Chapter 6 Replacing the Consumables Contents 2 Remove the brake roller. 4 Attach a new brake roller on the shaft. Index Lift the right side of the roller first, then pull out the shaft from the Insert the protrusion on the shaft into the slot. slot on the left. -
Page 76: Operational
Chapter 6 Replacing the Consumables Contents 2 Rotate the bushing in the direction of the arrow. 6 Close the cover. Index ATTENTION Introduction Confirm that the brake roller is installed properly. Otherwise, it may cause feeding errors such as paper jams. Scanner Overview Replace the pick roller. -
Page 77: Operational
Chapter 6 Replacing the Consumables Contents 4 Install the new pick roller in the scanner. 6 Close the sheet guide. Index Insert the left end of the shaft into the slot, and lower the other end Make sure that both ends of the sheet guide are locked firmly. gradually. -
Page 78: Operational
Contents Index Chapter 7 Troubleshooting Introduction Scanner Overview How to Load This chapter explains about the countermeasures against paper jams and other troubles, items to check before contacting Documents your scanner service provider, and how to read the product labels on the scanner. How to Use the ATTENTION Operator Panel... -
Page 79: Operational
Chapter 7 Troubleshooting Contents Index 7.1 Paper Jam Introduction When your document is jammed inside the scanner, remove Remove the jammed document. Scanner the document in the following procedure: Overview Do not use force to pull out the jammed document, and make sure to open the ADF first. -
Page 80: Operational
Chapter 7 Troubleshooting Contents ATTENTION Index Confirm that the ADF is closed properly. Otherwise, the document may not be fed into the ADF. Introduction Occasionally when scanning is complete or canceled, documents may remain in the ADF without any error message Scanner displayed. -
Page 81: Operational
Chapter 7 Troubleshooting Contents Index 7.2 Error Indications on Operator Panel Introduction When an error occurs during operation, the LED indicator If the Error Recovery Guide is installed in the computer, the Scanner lights in orange. Error Recovery Guide window appears when the Windows Overview In addition, the indication on the Function Number Display operating system is started up. -
Page 82: Operational
Cover Open the displayed error code and Consumables An EEPROM error contact your FUJITSU scanner The letter "U" and an error code appear alternately. occurred. dealer or an authorized FUJITSU Display Description Action scanner service provider. Troubleshooting An image memory... -
Page 83: Operational
2 Turn the scanner off then back An internal contact your FUJITSU scanner communication error dealer or an authorized FUJITSU How to Load If the problem persists, write of the scanner scanner service provider. Documents down the displayed error code occurred. -
Page 84: Operational
Scanner Service Provider" (page 104), and then contact your Documents FUJITSU scanner dealer or an authorized FUJITSU scanner "There are black traces on the document." (page 100) service provider. "The Carrier Sheet is not fed smoothly./Paper jams occur." (page 101) -
Page 85: Operational
Documents If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 104) first, then contact your FUJITSU scanner dealer or How to Use the an authorized FUJITSU scanner service provider. Operator Panel Various Ways to... -
Page 86: Operational
Replacing the Consumables If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 104) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Troubleshooting Operational Settings Appendix... -
Page 87: Scanning Does Not Start
Daily Care If the problem persists, check the items in "7.4 Before You Contact the Scanner Replacing the Service Provider" (page 104) first, then contact your FUJITSU scanner dealer or Consumables an authorized FUJITSU scanner service provider. Troubleshooting Operational Settings... -
Page 88: Scanning Takes A Long Time
Daily Care If the problem persists, check the items in "7.4 Before You Contact the Scanner Replacing the Service Provider" (page 104) first, then contact your FUJITSU scanner dealer or Consumables an authorized FUJITSU scanner service provider. Troubleshooting Operational Settings... -
Page 89: Operational
"7.4 Before You Contact the Scanner How to Use the Service Provider" (page 104) first, then contact your FUJITSU scanner dealer or Operator Panel an authorized FUJITSU scanner service provider. *1: The scanned image may differ from the original image significantly if you simply "binarize" (output in black & white) a picture or a photo. -
Page 90: Operational
If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 104) first, then contact your FUJITSU scanner dealer or Daily Care an authorized FUJITSU scanner service provider. *1: When you scan in grayscale or in color mode, the scanned image may not become sharp and clear. -
Page 91: Images Are Distorted Or Not Clear
Daily Care Replacing the If the problem persists, check the items in "7.4 Before You Contact the Scanner Consumables Service Provider" (page 104) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Troubleshooting Operational Settings Appendix... -
Page 92: Vertical Streaks Appear On The Scanned Image
Various Ways to If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 104) first, then contact your FUJITSU scanner dealer or Scan an authorized FUJITSU scanner service provider. Daily Care Replacing the... -
Page 93: An Error ("E" Or Other Letter Or Number) Is Already Displayed In The Function Number Display After Power-On
"7.4 Before You Contact the Scanner Service Provider" (page Operator Panel 104) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Various Ways to Scan If the problem persists, check the items in "7.4 Before You Contact the Scanner... -
Page 94: Multifeed Error Occurs Frequently
Chapter 7 Troubleshooting Contents Multifeed error occurs frequently. Index Introduction Do the documents meet the requirements described in Use documents that meet the requirements. "Precautions" in "Conditions" (page 35)? For details, refer to "2.2 Documents for Scanning" (page 35). Scanner Overview Are you using the Carrier Sheet? In the scanner driver, configure the scan settings for using the Carrier Sheet... -
Page 95: Operational
"7.4 Before You Contact the Scanner Various Ways to Service Provider" (page 104) first, then contact your FUJITSU scanner dealer or Scan an authorized FUJITSU scanner service provider. *1: "Consumables" refers to the Roller Set (the brake roller and the pick roller). -
Page 96: Situation In Which The Document Is Not Fed Into The Adf Occurs Frequently
If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 104) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Troubleshooting *1: "Consumables" refers to the Roller Set (the brake roller and the pick roller). -
Page 97: Paper Jams/Pick Errors Occur Frequently
"7.4 Before You Contact the Scanner Consumables Service Provider" (page 104) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. *1: "Consumables" refers to the Roller Set (the brake roller and the pick roller). Troubleshooting... -
Page 98: Scanned Images Turn Out Elongated
Daily Care If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 104) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Replacing the Consumables *1: "Consumables" refers to the Roller Set (the brake roller and the pick roller). -
Page 99: A Shadow Appears At The Top Or The Bottom Of The Scanned Image
Various Ways to If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 104) first, then contact your FUJITSU scanner dealer or Scan an authorized FUJITSU scanner service provider. Daily Care Replacing the... -
Page 100: There Are Black Traces On The Document
Operator Panel If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 104) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Various Ways to Scan Daily Care... -
Page 101: The Carrier Sheet Is Not Fed Smoothly./Paper Jams Occur
"Chapter 5 Daily Care" (page 62). Replace the Carrier Sheet. How to Use the For information on purchasing the Carrier Sheet, contact your FUJITSU Operator Panel scanner dealer or an authorized FUJITSU scanner service provider. Various Ways to Scan Did you start the scan after loading the Carrier Sheet in the Start the scan after loading the Carrier Sheet in the ADF paper chute (feeder). -
Page 102: Operational
Overview If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 104) first, then contact your FUJITSU scanner dealer or How to Load an authorized FUJITSU scanner service provider. Documents *1: "Consumables" refers to the Roller Set (the brake roller and the pick roller). -
Page 103: Part Of The Image Appears Missing In The Case Where The Carrier Sheet Is Used
Operator Panel If the problem persists, check the items in "7.4 Before You Contact the Scanner Service Provider" (page 104) first, then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Various Ways to Scan Daily Care... -
Page 104: Before You Contact The Scanner Service Provider
Contents Index 7.4 Before You Contact the Scanner Service Provider Introduction Error Status Please check the following items before contacting your Scanner FUJITSU scanner dealer or an authorized FUJITSU scanner Overview ■ service provider. Computer Connection Issues Item Findings General... -
Page 105: Operational
Chapter 7 Troubleshooting Contents ■ Image Quality Issues Index Item Findings Introduction Scanner driver and version Scanner Overview Interface controller Operating system How to Load (Windows) Documents Application Example: PaperStream Capture How to Use the Scanning sides Operator Panel Example: front, back, both Various Ways to Resolution Example: 600 dpi, 75 dpi... -
Page 106: Checking The Product Labels
Chapter 7 Troubleshooting Contents Index 7.5 Checking the Product Labels Introduction This section explains about the product labels on the scanner. Scanner Location Overview The label is located on the back of the scanner. How to Load Documents How to Use the Operator Panel Various Ways to Scan... -
Page 107: Chapter 8 Operational Settings
Contents Index Chapter 8 Operational Settings Introduction Scanner Overview How to Load This chapter explains how to use the Software Operation Panel to configure the scanner settings. Documents 8.1 Starting Up the Software Operation Panel....................108 How to Use the 8.2 Password Setting............................110 Operator Panel 8.3 Configuration Items .......................... - Page 108 Chapter 8 Operational Settings Contents Index 8.1 Starting Up the Software Operation Panel Introduction The Software Operation Panel is installed together with the Display the [Software Operation Panel] window. Scanner Windows Vista/Windows Server 2008/Windows 7 PaperStream IP driver. Click [Start] menu [All Programs] [fi Series] [Software Overview This application allows you to configure various settings such Operation Panel].
-
Page 109: Operational
Chapter 8 Operational Settings Contents The Software Operation Panel icon is displayed in the menu that Index appears when you click in the notification area. To have the Software Operation Panel icon always displayed in the Introduction notification area, drag the icon and drop it onto the notification area. - Page 110 Chapter 8 Operational Settings Contents Index 8.2 Password Setting Introduction By setting a password, the Software Operation Panel can run Enter a new password then again to confirm, and click the Scanner [OK] button. in [View Only mode] which allows users to only view the Overview Up to 32 characters can be used for the password.
- Page 111 Chapter 8 Operational Settings Contents Setting [View Only mode] HINT Index In [View Only mode], a check mark appears next to [View Only Set the Software Operation Panel to [View Only mode] in the mode] in the menu that is displayed by right-clicking the Software Introduction Operation Panel icon in the notification area.
- Page 112 Chapter 8 Operational Settings Contents Clearing [View Only mode] [View Only mode] is cleared, and the scanner settings can now be Index changed. Clear [View Only mode] in the following procedure: Introduction Right-click the Software Operation Panel icon in the Scanner notification area, and select [View Only mode] from the Overview...
- Page 113 Chapter 8 Operational Settings Contents Changing the Password Enter a new password then again to confirm, and click the Index [OK] button. Up to 32 characters can be used for the password. Change the password in the following procedure: Introduction Note that only alphanumeric characters (a to z, A to Z, 0 to 9) are allowed.
- Page 114 Chapter 8 Operational Settings Contents Clearing the Password Leave both fields blank and click the [OK] button. Index Clear the password in the following procedure: Introduction Right-click the Software Operation Panel icon in the Scanner notification area, and select [Password Setting] from the Overview menu.
- Page 115 Chapter 8 Operational Settings Contents Resetting the Password Enter a new password then again to confirm, and click the Index [OK] button. Up to 32 characters can be used for the password. In case you forgot your password, it can be reset in the Introduction Note that only alphanumeric characters (a to z, A to Z, 0 to 9) are following procedure:...
-
Page 116: Configuration Items
Chapter 8 Operational Settings Contents Index 8.3 Configuration Items Introduction The Software Operation Panel allows the configuration of the Scanner following settings for the scanner that is connected to the Overview computer: Device Setting How to Load Documents Start up the Software Operation Panel. How to Use the For details, refer to "8.1 Starting Up the Software Operation Panel"... -
Page 117: Operational
Chapter 8 Operational Settings Contents Item Description Parameter/Value Factory Default Index Count Check the counters to determine when to replace Total Count(ADF)/After cleaning/Brake Roller/Pick Roller Introduction (page 122) the consumables and to perform cleaning. Also use it to reset the counter when you have Scanner replaced the consumables or performed Overview... -
Page 118: Device Setting 2
Chapter 8 Operational Settings Contents Device Setting 2 HINT Index The Software Operation Panel settings can be restored to the factory default. Introduction Start up the Software Operation Panel. To restore the settings to the factory default, click the [Default] button. -
Page 119: Operational
Chapter 8 Operational Settings Contents Item Description Parameter/Value Factory Default Index Multifeed Specify a method for multifeed detection. Detect None/Check Overlapping (Ultrasonic)/Check None (page 132) multifeeds by monitoring the overlap, document Length/Check Overlapping and Length Introduction length, or the combination of both. Length: 10 mm This setting can also be configured in the Length (When [Check Length] is specified:... -
Page 120: Operational
Chapter 8 Operational Settings Contents Item Description Parameter/Value Factory Default Index Intelligent Multifeed Function When there is a paper of the same size attached Manual mode/Auto mode 1/Auto mode 2 Manual mode (page 137) to a designated location on the page, you can Introduction configure the scanner to memorize the location of the attachment and not detect multifeeds for that... -
Page 121: Operational
Chapter 8 Operational Settings Contents Item Description Parameter/Value Factory Default Index AutoCrop Boundary Specify whether or not to optimize (round up/ Optimize/Round Down Optimize (page 130) down) the fractional part of the scanned image Introduction data. Manual-feed timeout Select whether to disable or enable manual Disable/Enable Disable Scanner... -
Page 122: Settings Related To Sheet Counters
Chapter 8 Operational Settings Contents Index 8.4 Settings Related to Sheet Counters Introduction Checking and Resetting the Sheet Counters Start up the Software Operation Panel. Scanner For details, refer to "8.1 Starting Up the Software Operation Panel" (page 108). Overview ■... -
Page 123: Operational
Chapter 8 Operational Settings Contents ■ Resetting the Sheet Counters ATTENTION Index When you have replaced or cleaned a consumable part, reset the If you turned off the scanner by unplugging the power cable, or selected [Disable power switch], the number of scanned sheets Introduction corresponding counter by using the following procedure: may not be counted in [Total Count]. -
Page 124: Scanner Cleaning Cycle [Cleaning Cycle]
Chapter 8 Operational Settings Contents ■ Scanner Cleaning Cycle [Cleaning Cycle] Messages for Cleaning or Replacing Consumables Index The following message may appear while the scanner is in The cleaning cycle for the scanner can be specified. Introduction use: The background color of the [After cleaning] counter (in Message for replacing consumables Scanner [Device Setting]) turns yellow when the page count after... -
Page 125: Replacement Cycle Of Consumables [Life Counter Alarm Setting]
Chapter 8 Operational Settings Contents Replacement Cycle of Consumables [Life Specify a value as the replacement cycle for each of the Index consumables (brake roller and pick roller). Counter Alarm Setting] The value can range from 10,000 to 2,550,000 sheets (in increments Introduction of 10,000). -
Page 126: Settings Related To Scanning
Chapter 8 Operational Settings Contents Index 8.5 Settings Related to Scanning Introduction Adjusting the Position to Start the Scan Adjust the level of offset/vertical magnification as needed. Scanner [Offset/Vertical Magnification Adjustment] Overview When the output position of the scanned image is not correct How to Load or the image appears shortened/elongated (vertically), adjust Documents... -
Page 127: Removing Shadows/Streaks That Appear Around The Scanned Image [Page Edge Filler (Adf)]
Chapter 8 Operational Settings Contents Removing Shadows/Streaks that Appear around Vertical Description Index the Scanned Image magnification Adjustment Introduction [Page Edge Filler (ADF)] Unit The target for a vertical magnification Scanner adjustment is fixed to [ADF]. Depending on the condition of the documents that you scan, Overview the shadow of the document may appear as black streaks. -
Page 128: Removing A Color From The Scanned Image [Dropout Color]
Chapter 8 Operational Settings Contents Removing a Color from the Scanned Image Specify the width of each margin to fill in: top/bottom/left/ Index right. [Dropout color] T: top = 0 to 15 mm Introduction B: bottom = -7 to 7 mm With "Dropout color", you can select either green, red, or blue Scanner R: right = 0 to 15 mm... -
Page 129: Number Of Paper Feeding Retries
Chapter 8 Operational Settings Contents Number of Paper Feeding Retries Start up the Software Operation Panel. Index For details, refer to "8.1 Starting Up the Software Operation Panel" (page 108). Configure this setting to change the number of feeding retries Introduction when a pick error occurs. -
Page 130: Cropping The Image Boundary [Autocrop Boundary]
Chapter 8 Operational Settings Contents Cropping the Image Boundary Select whether to include or exclude the fractional data. Index Select [Optimize] to prevent any exclusion of fractional data from [AutoCrop Boundary] scanned images. Introduction Some fractional data may be generated in the images in the ATTENTION Scanner process of scanning. -
Page 131: Scanning At High Altitude [High Altitude Mode]
Chapter 8 Operational Settings Contents Scanning at High Altitude [High Altitude Mode] Setting the Image Quality for Scanning [Image Index Quality Mode] Select whether to enable or disable high altitude mode. Introduction Low atmospheric pressure at high altitudes may lower the Set the image quality mode. -
Page 132: Settings Related To Multifeed Detection
Chapter 8 Operational Settings Contents Index 8.6 Settings Related to Multifeed Detection Introduction Specifying a Multifeed Detection Method From the listing on the left, select [Device Setting 2] [Multifeed]. Scanner [Multifeed] Overview Multifeed is an error where two or more sheets are fed through How to Load the ADF at once. -
Page 133: Operational
Chapter 8 Operational Settings Contents Method Description Method Description Index Check Detects multifeed by the overlapping of Length Select a length difference from 10/15/20 mm Introduction Overlapping documents. when detecting a multifeed by the difference in (Ultrasonic) When this is selected, you can also specify the length of the documents. -
Page 134: Specifying The Area To Detect Multifeed [Document Check Area Specification For Multifeed Detection]
Chapter 8 Operational Settings Contents Specifying the Area to Detect Multifeed Specify the detection range. Index [Document check area specification for Multifeed Range Description Introduction Detection] Selected range Select the check box to specify the detection range (colored in light blue) in the Scanner The following setting is only available when you specified picture below. -
Page 135: Operational
Chapter 8 Operational Settings Contents Example 1: Range Description Index Position: Middle Start Displays the start position of the detection Introduction Selected range = Enable, Start = 50 mm, End = 200 mm (Middle) by the length from the leading edge of the document. -
Page 136: Operational
Chapter 8 Operational Settings Contents Example 2: Example 3: (Bad Example) Index Position: Middle Position: Middle Introduction Selected range = Enable, Start = 0 mm, End = 300 mm Selected range = Enable, Start = 100 mm, End = 102 mm Scanner Overview How to Load... -
Page 137: Specifying An Area Not To Detect Multifeed [Intelligent Multifeed Function]
Chapter 8 Operational Settings Contents Specifying an Area Not to Detect Multifeed Specify an operation mode. Index [Intelligent Multifeed Function] Mode Description Introduction Manual mode Does not memorize the size or location of When there is paper of the same size attached to a the paper attachment when a multifeed is Scanner designated location on the page, the scanner memorizes the... -
Page 138: Settings Related To Waiting Time
Chapter 8 Operational Settings Contents Index 8.7 Settings Related to Waiting Time Introduction Waiting Time in Manual Feed Mode From the listing on the left, select [Device Setting 2] Scanner [Manual-feed timeout]. [Manual-feed timeout] Overview When you scan by manually loading one sheet at a time, you How to Load can specify the waiting time (interval) for loading the next Documents... -
Page 139: Waiting Time To Enter Power Saving Mode [Power Saving]
Chapter 8 Operational Settings Contents Waiting Time to Enter Power Saving Mode [Power The value can range from 5 to 235 minutes (in increments of 5). Index saving] HINT Introduction Selecting the [Power off after a certain period of time] check box The waiting time for the scanner to enter power saving mode turns the power off automatically if the scanner is left on for a Scanner... -
Page 140: Settings Related To Power On/Off
Chapter 8 Operational Settings Contents Index 8.8 Settings Related to Power ON/OFF Introduction Method of Turning the Scanner ON/OFF [Power Select one of the following: Scanner [Enable power switch]: Press the [Power] button on the operator SW Control] panel. Overview [Disable power switch]: Use an AC power strip to control power The method by which the scanner is powered on/off can be supply for peripherals such as a scanner in... -
Page 141: Settings Related To Scanner Maintenance
Chapter 8 Operational Settings Contents Index 8.9 Settings Related to Scanner Maintenance Introduction Detecting Vertical Streaks [Vertical Streak Select whether to enable or disable vertical streak Scanner detection. Detection] Overview When you select [Enable], the scanner detects vertical streaks (dirt on the glass) during scanning with the ADF. -
Page 142: Specifying The Sensitivity Level For Vertical Streak Detection [Vertical Streak Sensitivity]
Chapter 8 Operational Settings Contents Specifying the Sensitivity Level for Vertical Specify the sensitivity level for vertical streaks. Index Low: Decreases the sensitivity level to detect dirt on the glass Streak Detection sections. Introduction [Vertical Streak Sensitivity] Normal: Monitors dirt on the glass sections with normal sensitivity. Keep this setting for normal use. -
Page 143: Appendix
Contents Index Appendix Introduction Scanner Overview How to Load This appendix provides the following information. Documents A.1 Basic Specification ...........................144 How to Use the A.2 Installation Specification...........................146 Operator Panel A.3 Outer Dimensions ............................147 Various Ways to A.4 Scanner Options ............................148 Scan A.5 Uninstalling the Software .........................149 Daily Care... -
Page 144: A.1 Basic Specification
Appendix Contents Index A.1 Basic Specification Introduction Scanner Item Specification Notes Overview Scanner Type How to Load Image sensor Color CIS × 2 (front, back) Documents Light source RGB3 Color LED × 2 (front, back) Scanning Minimum size 50.8 × 50.8 mm How to Use the area (width ×... -
Page 145: Operational
Appendix Contents Item Specification Notes Index Grayscale level 256 gradation levels 1024 gradation levels (10-bit) Introduction during internal processing Scanner Interface USB 2.0/1.1 (*5) B Type Overview *1: Long page scanning supports documents with a length of up to 5,588 mm (220 in.) when the resolution is set to 200 dpi or less. *2: When scanning plastic cards from the ADF, load one card at a time in the ADF paper chute (feeder). -
Page 146: A.2 Installation Specification
Appendix Contents Index A.2 Installation Specification Introduction Scanner Item Specification Overview Outer dimensions (W × D × H) (*1) 290 × 146 × 130 mm How to Load Installation space (W × D × H) (*2) 390 × 750 × 430 mm Documents Weight 2.9 kg (6.4 lb) -
Page 147: A.3 Outer Dimensions
Appendix Contents Index A.3 Outer Dimensions Introduction The outer dimensions are as follows: Scanner Overview How to Load Documents How to Use the Operator Panel Various Ways to Scan (5.75) (11.42) (8.35) (13.27) Daily Care Unit: mm (in.) Replacing the Consumables Troubleshooting Operational... -
Page 148: A.4 Scanner Options
The Carrier Sheet should be replaced approximately every 500 scans. However, replace it if damage or dirt is noticeable. Various Ways to Scan For details about purchasing the scanner options and more information, contact your FUJITSU scanner dealer or an authorized Daily Care FUJITSU scanner service provider. Replacing the... -
Page 149: Operational
Select [ABBYY FineReader for ScanSnap(TM)]. Windows Server 2012/Windows 8 When Uninstalling Manuals How to Use the Select [fi Series manuals for fi-7030]. Right-click the Start screen, and select [All apps] on the app bar Operator Panel [Control Panel] under [Windows System]. -
Page 150: Operational
For other inquiries regarding the scanner, refer to the following Operational web page: Settings http://imagescanner.fujitsu.com/g-support.html If the solution to your problem cannot be found on the above web page, refer to the contact information for your Fujitsu office on the following web page: Appendix http://imagescanner.fujitsu.com/warranty.html Glossary... -
Page 151: Operational
Glossary Contents Glossary Index Introduction Scanner Double Letter size Interface Overview dpi (dots per inch) Inversion Paper jam A4 size How to Load Driver ISIS Patch code A5 size Documents Dropout color Pick roller A6 size Duplex scanning mode Job Separator Pick start time How to Use the A7 size... -
Page 152: Operational
Glossary Contents Index Introduction A4 size A standard paper size which is 210 × 297 mm (8.27 × 11.7 in.). Scanner Overview A5 size A standard paper size which is 148 × 210 mm (5.83 × 8.27 in.). How to Load Documents A6 size A standard paper size which is 105 ×... -
Page 153: Operational
Glossary Contents Index Introduction Carrier Sheet A transparent plastic sheet designed for scanning documents that are larger than A4/Letter size. Scanner Overview CIS (Contact Image Sensor) A sensor which perceives the light reflected from the document using a light-receiving sensor array and LEDs, and converts How to Load it into digital form. -
Page 154: Operational
Glossary Contents Driver Index A program specifically designed for operating systems, which enables interaction with a hardware device. Introduction Dropout color A function which removes a specified color from a scanned image. Scanner Overview Duplex scanning mode A mode for scanning both sides of the document at once. ( simplex scanning mode) How to Load Documents How to Use the... -
Page 155: Operational
Glossary Contents Filter Index A function that applies a type of filter operation process on a scanned image. Introduction Types of filtering are as follows: Digital Endorser: Scanner Adds alphanumeric character strings on the scanned image data. Overview Page Edge Filler: How to Load Fills in the margins of the scanned image in a specified color. -
Page 156: Operational
Glossary Contents Intelligent Multifeed Function Index A function that excludes certain patterns of overlapping of documents that is detected as multifeed, by letting the scanner Introduction memorize the overlap pattern. For instance, when there is paper of the same size attached to a designated location on the page, the scanner memorizes Scanner the location of the attachment and can be configured not to detect multifeeds for that location. -
Page 157: Operational
Glossary Contents Legal size Index A standard paper size used in the United States and other countries (8.5 × 14 in.). Introduction Letter size A standard paper size used in the United States and other countries (8.5 × 11 in.). Scanner Overview How to Load... -
Page 158: Operational
Glossary Contents Overscan Index A function that scans the document in a size larger than the specified paper size. Introduction Scanner Overview Paper jam Refers to an error in which a document is jammed inside the paper path or feeding is interrupted by documents slipping. How to Load Patch code Documents... -
Page 159: Operational
Glossary Contents Index Introduction Simplex scanning mode A mode for scanning only one side (front or back) of the document. ( duplex scanning mode) Scanner Overview Smoothing Refers to the removal of irregularities on diagonal lines and curves. It is a processing method commonly used in OCR How to Load applications. -
Page 160: Operational
Glossary Contents Index Introduction White reference sheet The white part located inside the ADF which the scanner defines as white, in order to adjust the brightness of all other areas Scanner accordingly. Overview How to Load Documents How to Use the Operator Panel Various Ways to Scan... -
Page 161: Operational
Index Contents Index Index Introduction Scanner Overview advanced scanning............how to clean the ADF with Cleaning Paper....how to clean the ADF with cloth ........How to Load how to clean the Carrier Sheet........Documents how to clean the inside........... basic flow of scanning operation ........ -
Page 162: Scanner Overview
Index Contents outer dimensions ............Index troubleshooting............Introduction Page Edge Filler ............Scanner paper jam................ uninstalling software............. Overview parts and functions ............password setting for the Software Operation Panel ..power saving mode ............How to Load various ways to scan ............Power SW Control ............ -
Page 163: How To Use The Operator Panel
Scanner Overview How to Load Documents How to Use the Operator Panel Various Ways to Scan Daily Care fi-7030 Image Scanner Operator's Guide Replacing the Consumables P3PC-5992-02ENZ0 Issue date: May 2016 Troubleshooting Issued by: PFU LIMITED Operational The contents of this manual are subject to change without notice.