hit counter code
Panasonic MC-CG882-SC79 Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Vacuum Cleaner
  5. MC-CG882-SC79
  6. Service manual
Panasonic MC-CG882-SC79 Service Manual

Panasonic MC-CG882-SC79 Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

TABLE OF CONTENTS

1 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 4
4.1. Remove the Dust cover assy. -------------------------- 5
and the Pedal cover. -------------------------------------- 5
unit.------------------------------------------------------------ 6
4.5. Remove the P.C.B. A Unit. ------------------------------ 8
4.6. Remove the Motor. ---------------------------------------- 9
5 Wiring Connection Diagram ---------------------------------11
6 Exploded View and Replacement Parts List -----------12
6.1. EXPLODED VIEW (ATTACHMENTS) --------------12
6.2. PARTS LIST (ATTACHMENTS) ----------------------12
6.3. EXPLODED VIEW (BODY UNIT) --------------------13
6.4. PARTS LIST (BODY UNIT) ----------------------------14
Model No.
Product Color :Royal Silver
Destination
PAGE
6.5. PACKING INSTRUCTIONS --------------------------- 16
6.6. PACKING LIST ------------------------------------------- 17
© Panasonic Corporation 2009 Unauthorized copy-
ing and distribution is a violation of law.
Order Number VCB0910009CE
Vacuum Cleaner
MC-CG882-SC79
:Europe
PAGE

Advertisement

Table of Contents
loading

Related Manuals for Panasonic MC-CG882-SC79

Summary of Contents for Panasonic MC-CG882-SC79

  • Page 1: Table Of Contents

    6 Exploded View and Replacement Parts List -----------12 6.1. EXPLODED VIEW (ATTACHMENTS) --------------12 6.2. PARTS LIST (ATTACHMENTS) ----------------------12 6.3. EXPLODED VIEW (BODY UNIT) --------------------13 6.4. PARTS LIST (BODY UNIT) ----------------------------14 © Panasonic Corporation 2009 Unauthorized copy- ing and distribution is a violation of law.

  • Page 2: Specifications

    1 Specifications Model No. MC-CG882-SC79 Power source AC230V ~ 50Hz Input power (MAX) 1600W Input power (IEC) 1300W Power control Extension wand Telescopic Nozzle assy Dimensions (WxLxH)mm 312×489×243 Cord length 6.5m Net weight 6.5kg Cleaning tools Crevice nozzle / Upholstery nozzle / Dusting brush...

  • Page 3: Location Of Controls And Components

    2 Location of Controls and Components...

  • Page 4: Troubleshooting Guide

    3 Troubleshooting Guide CONDITION PARTS TO BE CHECKED CHECK METHOD REMEDY The motor does not rotate. Power cord Check if the power cord is broken. If the cord is broken, replace the Inspect the cord in the cord reel cord reel assy. assy for continuity.

  • Page 5: Disassembly And Assembly Instructions

    4 Disassembly and Assembly Instructions Precautions: Make sure to power off the vacuum cleaner before replacing the parts. Disconnect the plug from the outlet. Caution: (1) When disassembling, check the component fitting state and wirings. After repairing, always restore them to the origi- nal state.

  • Page 6: Remove The Upper Body Unit And Lower Body Unit

    3. Remove the Swivel cap. 5. Remove the Brake pedal, Switch pedal, and Switch pedal spring. Fig.3 4. Remove the two screws each from the Switch cover and Fig.5 Pedal cover. 4.3. Remove the Upper body unit and Lower body unit. 1.

  • Page 7: Remove The Cord Reel Partition Unit

    2. Remove the 2 screws holding the Lower body. 5. Remove both Left and Right wheel supporters. Fig.7 Fig.10 3. Remove the 7 screws holding the Upper body. 4.4. Remove the Cord reel partition unit. 1. Remove the Cord reel partition unit from the Lower body. 2.

  • Page 8: Remove The P.c.b. A Unit

    4.5. Remove the P.C.B. A Unit. 3. Release the spare turns of the cord while holding down the brake lever. 1. Remove the Motor Unit from the Lower body Fig.12 Fig.14 *Caution for re-assmbling: There are 3pre-windings. 2. Remove the Body lining upper. 4.

  • Page 9: Remove The Motor

    4. Remove the P.C.B Holder A unit. 5. Remove the P.C.B A Unit from the Motor cover. 6. Disconnect the fast-on terminals of the two Lead wires from the P.C.B A Unit. Note: Pull the fast-on terminals straight out without jiggling them while pressing the lock to release it.
  • Page 10 2. Remove the Motor case band around the Motor cover 5. Remove the thermal protector. and the Motor support rubber. 3. Remove the two pieces of Packing F between the Motor cover and Motor case. *Carefully remove it so that it can be reused for reas- sembly if possible.

Table of Contents