Before Using the Product Connecting and Using a Source Device Screen Setup Securing the Installation Space Read below before installing the monitor. SAMSUNG MAGIC Bright Precautions for storage Connecting and Using a PC Brightness Safety Precautions Connection Using the D-SUB Cable (Analog Type) 20...
Page 3
Table of contents Setup and Reset Troubleshooting Guide Smart ECO Saving Requirements Before Contacting Samsung Customer Service Center Off Timer Plus Testing the Product Checking the Resolution and Frequency PC/AV Mode Check the following. Source Detection Q & A Key Repeat Time...
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. ― Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product (Service fee will be charged.)
• Do not disconnect the power cord while the product is being used. • Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. • Keep the power socket where the power cord is connected unobstructed.
Do not expose the product to direct sunlight, heat, or a hot object such as a stove. ‒ Be sure to consult Samsung Customer Service Center if you want to install the product at such a ‒ The product lifespan may be reduced or a fire may result.
There is a high voltage inside the product. Never disassemble, repair or modify the product ‒ Be sure to power off the product and disconnect the power cord when water or other foreign yourself. substances have entered the product. Then contact Samsung Customer Service Center. ‒ Contact Samsung Customer Service Center for repairs. •...
Page 8
Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ‒ Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time. •...
The items below are not available if the Eye Saver Mode function is enable. • Picture Brightness, Game Mode, SAMSUNG Bright, Color MAGIC • System Smart ECO Saving Move to the upper or lower menu or adjust the value for an option on the OSD Key Guide menu.
Reverse Side Icons Description Press the button to automatically adjust the screen settings. ― The color and shape of parts may differ from what is shown. Specifications are subject to change without ― Changing the resolution in Display Properties will activate the Auto Adjustment notice to improve quality.
― The displayed image may differ depending on the model. ― The functions available on the monitor may vary depending on the model. Refer to the actual product. Brightness ― This menu is not available when SAMSUNG Bright is set to Dynamic Contrast mode.
Adjusting the Product Tilt and Height Rotating the Monitor Screen ― The color and shape of parts may differ from what is shown. Specifications are subject to change without ― You can rotate your monitor as shown below. notice to improve quality. ―...
Anti-theft Lock Precautions for moving the monitor ― An anti-theft lock allows you to use the product securely even in public places. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: •...
‒ Samsung shall not be held liable for any product damage or personal injury caused by using a wall-mount kit other than the one specified or from an attempt to install the wall-mount kit on your own.
‒ Samsung shall not be held liable for any product damage or personal injury caused by using a wall-mount kit other than the one specified or from an attempt to install the wall-mount kit on your own.
Installation Attaching the Stand (S24H650GD* / S27H650FD*) ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― The exterior may differ depending on the product. Insert the stand neck into the stand base in the Place the protective Styrofoam (cushion) included Place the stand neck on the display, as shown in Turn the stand neck of the display clockwise for...
Attaching the Stand (S24H650FD*) ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― The exterior may differ depending on the product. Insert the stand neck into the stand base in the Place the protective Styrofoam (cushion) included Place the stand neck on the display, as shown in Turn the stand neck of the display clockwise for...
Removing the Stand (S24H650GD* / S27H650FD*) ― Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down. ― The exterior may differ depending on the product. Place the product on a clean and flat floor as shown Lift the stand neck in the arrow direction to detach it Unfasten the connecting screw at the bottom of the in the figure.
Removing the Stand (S24H650FD*) ― Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down. ― The exterior may differ depending on the product. Place the product on a clean and flat floor as shown Lift the stand neck in the arrow direction to detach it Unfasten the connecting screw at the bottom of the in the figure.
Chapter 03 Connecting and Using a Source Device Read below before installing the monitor. Connecting and Using a PC Check the shapes of both ends of the cables that came with the monitor, and check the shapes and Select a connection method suitable for your PC. ―...
Connection Using the HDMI Cable Connection Using the DP Cable Check to make sure that the power cables for the monitor and external devices, such as Check to make sure that the power cables for the monitor and external devices, such as computers and set-top boxes, are not connected to the power outlet.
Connecting the Power To use the product, connect the power cable to a power outlet and the POWER IN port on the product. ― The input voltage is switched automatically.
Connecting a USB device Connect the port of the monitor and the USB port of the computer with the USB cable. ― To use port, you have to connect the UP (Upstream Cable) to the PC. ― You can use a USB device such as a mouse, keyboard, memory stick or external hard disk drive (HDD) by ―...
Tidying Up the Connected Cables (S24H650GD* / S27H650FD*) Tilt the display, as shown in the figure. Rotate the machine to the highest vertical Connect the corresponding cables. Arrange the cables through the groove on the position. COVER-REAR, and then attach the COVER-REAR SUB.
Tidying Up the Connected Cables (S24H650FD*) Stand assembly is complete. Rotate the machine to the highest vertical Connect the cables to their correct ports, and Rotate the machine to the horizontal position. position. then arrange each of the two cables through either side of the COVER-STAND CABLE, as shown in the figure.
Driver Installation ― You can set the optimum resolution and frequency for this product by installing the corresponding drivers. ― To install the latest version of the product driver, download it from the Samsung Electronics website at http://www.samsung.com. Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase.
Custom: Customize the contrast and brightness as required. • Standard: Obtain a picture quality suitable for editing documents or using Internet. SAMSUNG MAGIC Bright • Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content.
You can adjust the general brightness of the picture. (Range: 0~100) Adjust the tint of the screen. ― This menu is not available when A higher value will make the picture appear brighter. SAMSUNG Bright is set to Cinema Dynamic Contrast mode.
SAMSUNG MAGIC Upscale Eye Saver Mode Upscale function can enhance the layers of the picture details and the vividness of the picture. Set to an optimum picture quality suitable for eye relaxation. SAMSUNG MAGIC The function has more obvious effects on low-resolution pictures.
Picture Size Screen Adjustment ― This menu is only available when Change the picture size. Picture Size is set to Screen Fit Mode. When a 480P or 576P or 720P or 1080P signal is input in mode and the monitor can display normally, mode select Screen Fit...
Chapter 05 Adjusting OSD (On Screen Display) settings A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The color and shape of parts may differ Position from what is shown.
Chapter 06 Setup and Reset A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The color and shape of parts may differ Off Timer Plus from what is shown.
PC/AV Mode Information PC/AV Mode to AV. The picture size will be enlarged. View the current input source, frequency and resolution. This option is useful when you view a movie. • Set to when connected to a PC. • Set to when connected to an AV device.
Windows 7 32Bit/64Bit Easy Setting Box enables users to use the monitor by partitioning multiple sections. • Windows 8 32Bit/64Bit To install the latest version of Easy Setting Box, download it from the Samsung Electronics website at • Windows 8.1 32Bit/64Bit http://www.samsung.com.
Check the following. Customer Service Center Installation issue (PC mode) ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked.
Page 36
Not Optimum Mode is displayed. Video playback is choppy. This message appears when the signal from the graphics card exceeds the maximum resolution or Playback of high-definition large video files can be choppy. This may be because the video player is frequency for the product.
Q & A ― Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. • Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings → Advanced → Monitor, and adjust Refresh rate under Monitor settings. •...
Chapter 09 Specifications General Model Name S24H650GD* S24H650FD* S27H650FD* Size 24 Class (24.0 Inches / 61.1 cm) 24 Class (23.8 Inches / 60.4 cm) 27 Class (27.0 Inches / 68.6 cm) Display area 518.4 mm (H) x 324 mm (V) 527.04 mm (H) x 296.46 mm (V) 597.888 mm (H) x 336.312 mm (V) 20.4 Inches (H) x 12.8 Inches (V)
Page 39
― The above specifications are subject to change without notice to improve quality. ― This device is a Class B digital apparatus. ― For detailed device specifications, visit the Samsung Electronics website. (USA only) Dispose unwanted electronics through an approved recycler.
Standard Signal Mode Table Model Name S24H650GD* S24H650FD*/S27H650FD* Synchronization Horizontal Frequency 30 – 81 kHz 30 – 81 kHz Vertical Frequency 50 – 65 Hz 50 – 75 Hz Resolution Optimum Resolution 1920 x 1200 @ 60 Hz 1920 x 1080 @ 60 Hz Maximum Resolution 1920 x 1200 @ 60 Hz 1920 x 1080 @ 60 Hz...
Page 41
S24H650FD*/S27H650FD* Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 MAC, 640 x 480 35.000 66.667 30.240 MAC, 832 x 624 49.726 74.551 57.284 MAC, 1152 x 870 68.681 75.062 100.000 VESA, 640 x 480...
Page 42
S24H650FD*/S27H650FD* Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 1680 x 1050 65.290 59.954 146.250 VESA, 1920 x 1080 67.500 60.000 148.500 ― Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz.
• Use of supplies or separatly sold product unspecified by Samsung. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Not a product defect Electronics Co., Ltd. •...
Samsung guarantee that replacement parts will be available for 5 years after the end of production. After 5 years, in the event that the Samsung’s service center has run out of replacement parts and cannot repair the product, Samsung will replace your product at no additional charge. If the model you...