Page 1 User Manual PE40C PE46C PE55C The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00299C-03 Great user manuals database on UserManuals.info...
Page 2: Table Of Contents
Cleaning Storage Safety Precautions Symbols Electricity and Safety Installation Operation PREPARATIONS Checking the Contents Removing the Packaging (for PE40C and PE46C models only) Removing the Packaging (for PE55C models only) Checking the Components Parts Control Panel Reverse Side Anti-theft Lock...
Page 3 Table Of Contents CONNECTING AND USING Before Connecting A SOURCE DEVICE Pre-connection Checkpoints Connecting and Using a PC Connecting to a PC Changing the Resolution Using a PC Connecting an External Monitor Connecting to a Video Device Connection Using the AV Cable Connection Using the Component Cable Connection Using an HDMI-DVI Cable Connection Using an HDMI Cable...
Page 4 Table Of Contents What is MDC? Connecting to MDC Connection Management User Login Auto Set ID Cloning Command Retry Getting Started with MDC Main Screen Layout Menus Screen Adjustment Advanced features Sound Adjustment System Setup Tool Settings Other Functions Troubleshooting Guide SCREEN ADJUSTMENT Picture Mode If the input source is PC, DVI or DisplayPort...
Page 5 Table Of Contents Advanced Settings Dynamic Contrast Black Tone Flesh Tone RGB Only Mode Colo(u)r Space White Balance 10p White Balance (Off / On) Gamma Expert Pattern Motion Lighting (Off / On) Picture Options Colo(u)r Tone Colo(u)r Temp. Digital Noise Filter MPEG Noise Filter HDMI Black Level Film Mode...
Page 6 Table Of Contents Wi-Fi Direct Soft AP AllShare Settings Using the AllShare Play Function Device Name SYSTEM Multi Control Configuring settings for Multi Control Time Clock set Sleep Timer On Timer Off Timer Holiday Management Language Rotate menu(Rotate Menu) Eco Solution Energy Saving Eco Sensor (Off / On) No Signal Power Off...
Page 7 Table Of Contents Ticker Video Wall Video Wall Format Horizontal Vertical Screen Position Source AutoSwitch Settings General Max. Power Saving Game Mode BD Wise Menu Transparency Sound Feedback Auto Power Standby Control Lamp Schedule OSD Display Power On Adjustment Temperature Control Anynet+(HDMI-CEC) Anynet+(HDMI-CEC) Auto Turn Off (No / Yes)
Page 8 Table Of Contents SUPPORT Software Update By USB Alternative Software Contact Samsung Contents Home MagicInfo Lite MagicInfo Premium S MagicInfo Videowall S AllShare Play Source ALLSHARE PLAY What is AllShare Play? Read the following before using AllShare Play with a USB device...
Page 9 Table Of Contents Supported Subtitle and AllShare Play file formats Subtitle Supported image resolutions Supported music file formats Supported Video Formats MAGICINFO LITE File Formats Compatible with MagicInfo Lite Player Contents MagicInfo Lite Network Schedule Local schedule Internal AutoPlay USB AutoPlay Local Schedule Manager Registering a Local schedule Modifying a Local schedule...
Page 10 Table Of Contents Settings Server Network Setting Default content duration Content ratio Image Effect Default content Screen layout Schedule Name Safety Remove USB Device(Safety Remove USB) Delete all content Reset Settings When Content is Running Viewing the details of the content that is running Changing the settings for the content that is running MAGICINFO PREMIUM S...
Page 11 Table Of Contents Template Manager Registering a Template Content Manager Copying content Deleting content Settings Server Network Setting Default content duration Content ratio Image Effect Default content Screen layout Schedule Name Safety Remove USB Device(Safely Remove USB) Delete all content Reset Settings When Content is Running Viewing the details of the content that is running...
Page 12 Table Of Contents TROUBLESHOOTING Requirements Before Contacting Samsung Customer Service Centre GUIDE Testing the Product Checking the Resolution and Frequency Check the followings. Q & A SPECIFICATIONS General PowerSaver Standard Signal Mode Table Licence APPENDIX Contact SAMSUNG WORLD WIDE Responsibility for the Pay Service (Cost...
Page 13: Before Using The Product
The contents of this manual are subject to change without notice to improve quality. © 2013 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft and Windows are registered trademarks of Microsoft Corporation.
Page 14: Cleaning
Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. The following images are for reference only. Real-life situations may differ from what is shown in the images.
Page 15: Safety Precautions
Before Using the Product Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
Page 16: Electricity And Safety
Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result.
Page 17: Installation
Do not disconnect the power cord while the product is being used. The product may become damaged by an electric shock.  Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. A fire or electric shock may result.
Page 18 Before Using the Product Keep the plastic packaging out of the reach of children. Children may suffocate.  Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.) The product may fall and become damaged and/or cause an injury. ...
Page 19: Operation
SAMSUNG time) may seriously affect its performance. Be sure to consult Samsung Customer Service Centre if you want to install  the product at such a place. Operation Warning There is a high voltage inside the product.
Page 20 Be sure to power off the product and disconnect the power cord when water  or other foreign substances have entered the product. Then contact Samsung Customer Service Centre. Product failure, an electric shock or fire may result.  Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.
Page 21 Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. Activate power-saving mode or a moving-picture screen saver if you will not  be using the product for an extended period of time. Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc).
Page 22 Before Using the Product Exercise caution when adjusting the product angle or stand height. Your hand or finger may get stuck and injured.  Tilting the product at an excessive angle may cause the product to fall and  an injury may result. Do not place heavy objects on the product.
Page 23: Preparations
Checking the Contents The appearance of the actual product may differ from the images shown. 1.1.1 Removing the Packaging (for PE40C and PE46C models only) Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument.
Page 24: Removing The Packaging
Preparations 1.1.2 Removing the Packaging (for PE55C models only) Remove the black locking device at the bottom of the box. Using the grooves in the box, lift and remove the top of the box. Check the components and remove the styrofoam and plastic bag. The appearance of actual components may differ from the image shown.
Page 25: Checking The Components
Preparations 1.1.3 Checking the Components Contact the vendor where you purchased the product if any components are missing.  The appearance of the components and items sold separately may differ from the image shown.  A stand is not provided with the product. To install a stand, you can purchase one separately. ...
Page 26 Preparations Items sold separately The stand is not supplied.  The following items can be purchased at your nearest retailer.  Wall-mount Kit Stand RS232C-Stereo cable DVI cable HDMI-DVI cable DP cable HDMI cable Video cable Component cable Stereo cable AV cable RCA stereo cable External sensor Kit...
Page 27 Preparations RS232C(IN) Adapter The RS232C adapter can be used to connect to another monitor using the D-SUB (9-pin) type RS232C cable. Ensure you connect each of the adapters to the correct RS232C IN or OUT port on the product. 1 Preparations Great user manuals database on UserManuals.info...
Page 28: Parts
Preparations Parts 1.2.1 Control Panel Panel Key POWER Remote sensor Speaker Panel Key Buttons Description Power on the product. If you press the [ ] button when the product is turned on, the control menu will be displayed. To exit the OSD menu, press and hold the panel key for at least one second.
Page 29 Preparations Control menu If you press the [ ] button on the panel key ("1.2.1 Control Panel") when the product is turned on, the control menu will be displayed. CONTENT Return Icons Description Select the connected input source. Move the panel key right to select Source ] in the control menu.
Page 30: Reverse Side
Preparations 1.2.2 Reverse Side The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. RS232C IN RS232C IR / AMBIENT SENSOR IN AUDIO RGB / DVI / HDMI / AV / COMPONENT AUDIO IN POWER...
Page 31: Anti-Theft Lock
Preparations Port Description Receives the remote control signal via the external sensor board and [IR OUT] outputs the signal via LOOPOUT. [RJ45] Connects to MDC using a LAN cable. Assembling the Holder-Wire stand 1.2.3 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places. ...
Page 32: Remote Control
Preparations 1.2.4 Remote Control Using other display devices in the same space as the remote control of this product can cause the  other display devices to be inadvertently controlled. Remote control button functions may differ for different products.  Power on the product.
Page 33 Preparations Adjusting the OSD with the Remote Control Open the OSD menu. Select from Picture, Sound, Network, System Support in the displayed OSD menu screen. Change settings as desired. Finish setting. Close the onscreen display (OSD) menu. To place batteries in the remote control 1 Preparations Great user manuals database on UserManuals.info...
Page 34 Preparations Remote Control Reception Range Use the remote control within 7m to 10m from the sensor on the product at an angle of 30˚ from the left and right. Store used batteries out of reach of children and recycle.  Do not use a new and used battery together.
Page 35: Connection Using An Ir Stereo Cable
Preparations 1.2.5 Connection Using an IR Stereo Cable Turn off the device before connecting the External Sensor Kit. After it is connected, turn on the device. Controlling more than one display product using your remote control IR OUT AMBIENT SENSOR IN Connect the [IR OUT] port on the product to the [IR / AMBIENT SENSOR IN] port on the other ...
Page 36: Before Installing The Product (Installation Guide)
Make sure to install the specified wall mount.  1.3.1 Tilting Angle and Rotation Contact Samsung Customer Service Centre for further details. 15 Û The product can be tilted at a maximum angle of 15 from a perpendicular wall surface.
Page 37: Ventilation
35 C. Figure 1.1 Side view 2. Installation on an Indented Wall Contact Samsung Customer Service Centre for further details. Figure 1.3 Top view Plane view Minimum 40 mm...
Page 38: Dimensions
Preparations Dimensions Unit: mm (inches) Model name PE40C 919.6 (36.2) 885.6 (34.9) 498.2 (19.6) 532.0 (20.9) 35.1 (1.38) PE46C 1054.5 (41.52) 1018.1 (40.1) 572.7 (22.5) 608.5 (24.0) 35.1 (1.38) PE55C 1249.5 (49.19) 1209.6 (47.6) 680.4 (26.8) 721.0 (28.4) 35.1 (1.38) All drawings are not necessarily to scale.
Page 39: Installing The Wall Mount
We recommend you contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.
Page 40 Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury  when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
Page 41: Remote Control
Preparations Remote Control 1.6.1 Cable Connection RS232C Cable Interface RS232C (9 pins) TxD (No. 2), RxD (No. 3), GND (No. 5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow control None Maximum length 15m (only shielded type) Pin assignment ...
Page 42 Preparations RS232C cable  Connector: 9-Pin D-Sub to Stereo Cable -P1- -P2- -P1- -P1- -P2- -P2- Female --------> STEREO PLUG <-------- (3.5ø) --------- LAN Cable Pin assignment  1 2 3 4 5 6 7 8 Pin No. Standard Colo(u)r Signal White and orange Orange...
Page 43 Preparations Connector: RJ45  Direct LAN cable (PC to HUB) RJ45 MDC RJ45 MDC Signal Signal <--------> <--------> <--------> <--------> Cross LAN cable (PC to PC) RJ45 MDC Signal Signal <--------> <--------> <--------> <--------> 1 Preparations Great user manuals database on UserManuals.info...
Page 44: Connection
Preparations 1.6.2 Connection Connection 1  RS232C RS232C RS232C RS232C Connection 2  RJ45 RJ45 1 Preparations Great user manuals database on UserManuals.info...
Page 45 Preparations Connection 3  RJ45 RS232C RS232C RS232C RS232C 1 Preparations Great user manuals database on UserManuals.info...
Page 46: Control Codes
Preparations 1.6.3 Control Codes Viewing control state (Get control command) Header Command Data length Checksum 0xAA Command type Controlling (Set control command) Header Command Data length Data Checksum 0xAA Command Value type Command Command type Command Value range Power control 0x11 Volume control 0x12...
Page 47 Preparations E.g. Power On & ID=0 Header Command Data length Data 1 Checksum 0xAA 0x11 "Power" Header Command Data length Data 1 0xAA 0x11 To control all devices connected by a serial cable simultaneously irrespective of IDs, set the ID as ...
Page 48 Preparations Volume control Function  The volume of a product can be adjusted using a PC. Viewing volume state (Get Volume Status)  Header Command Data length Checksum 0xAA 0x12 Setting the volume (Set Volume)  Header Command Data length Data Checksum 0xAA...
Page 49 Preparations Input source control Function  The input source of a product can be changed using a PC. Viewing input source state (Get Input Source Status)  Header Command Data length Checksum 0xAA 0x14 Setting the input source (Set Input Source) ...
Page 50 Preparations  Header Command Data length Ack/Nak r-CMD Val1 Checksum "Input 0xAA 0xFF ‘A’ 0x14 Source" "Input Source": An input source code to be set on a product  Header Command Data length Ack/Nak r-CMD Val1 Checksum 0xAA 0xFF ‘N’ 0x14 "ERR"...
Page 51 Preparations  Header Command Data length Ack/Nak r-CMD Val1 Checksum "Screen 0xAA 0xFF ‘A’ 0x18 Mode" "Screen Mode": A code that sets the product status  Header Command Data length Ack/Nak r-CMD Val1 Checksum 0xAA 0xFF ‘N’ 0x18 "ERR" "ERR": A code showing what error has occurred Screen size control Function ...
Page 52 Preparations PIP On/Off control Function  The PIP mode of a product can be turned on or off using a PC. Only available on models that have the PIP function.  The mode cannot be controlled if Video Wall is set to On. ...
Page 53 Preparations Auto adjustment control (PC and BNC only) Function  Automatically adjust the PC system screen using a PC. Viewing auto adjustment state (Get Auto Adjustment Status)  None Setting auto adjustment (Set Auto Adjustment)  Header Command Data length Data Checksum 0xAA...
Page 54 Preparations Video Wall Mode Control Function  Video Wall mode can be activated on a product using a PC. This control is only available on a product whose Video Wall is enabled. This function is not available in MagicInfo. Viewing video wall mode (Get Video Wall Mode) ...
Page 55 Preparations Safety Lock Function  PC can be used to turn the Safety Lock function on or off on a product. This control is available regardless of whether or not the power is turned on. Viewing the safety lock state (Get Safety Lock Status) ...
Page 56 Preparations Video Wall On Function  Turn Video Wall on or off on the product from your computer. Get Video Wall On/Off Status  Header Command Data length Checksum 0xAA 0x84 Set Video Wall On/Off  Header Command Data length Data Checksum 0xAA...
Page 57 Preparations Video Wall User Control Function  Turn Video Wall on or off on the product from your computer. Get Video Wall Status  Header Command Data length Checksum 0xAA 0x89 Set Video Wall  Header Command Data length Val1 Val2 Checksum 0xAA...
Page 58 Preparations 10x10 Video Wall Model 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x2F 0x21 0x22 0x23 0x24 0x25 0x26 0x27...
Page 59 Preparations  Data Ack/ Header Command r-CMD Val1 Val2 length Checksum 0xAA 0xFF ‘A’ 0x89 Wall_Div Wall_SNo V.Wall_On : Same as above  Header Command Data length Ack/Nak r-CMD Val1 Checksum 0xAA 0xFF ‘N’ 0x89 "ERR" "ERR": A code showing what error has occurred 1 Preparations Great user manuals database on UserManuals.info...
Page 60: Connecting And Usinga Source Device
Connecting and Using a Source Device Before Connecting Check the following before you connect this product with other devices. Devices that can be connected to this product include PCs, camcorders, speakers, set top boxes and DVD/Blu-ray Disc players. 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it.
Page 61: Connecting And Using A Pc
Connecting and Using a Source Device Connecting and Using a PC 2.2.1 Connecting to a PC Do not connect the power cable before connecting all other cables.  Ensure you connect a source device first before connecting the power cable. A PC can be connected to the product in a variety of ways.
Page 62 Connecting and Using a Source Device Connection Using an HDMI-DVI Cable HDMI IN RGB / DVI / HDMI / AV / COMPONENT AUDIO IN When you connect a PC to the product using an HDMI-DVI cable, set Edit Name DVI PC to access video and audio content stored on the PC.
Page 63 Connecting and Using a Source Device Connection Using an DP Cable DP IN Precautions for using DP To increase the standby power capacity, the product stops DP communication when it is turned  off or in power-saving mode. If the product in dual monitor mode is turned off or goes into power-saving mode, monitor setting changes may not be updated.
Page 64: Changing The Resolution Using A Pc
Connecting and Using a Source Device 2.2.2 Changing the Resolution Using a PC Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture  quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. ...
Page 65 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution and change the resolution. Changing the Resolution on Windows 8 Go to Settings Control Panel Display Screen Resolution and change the resolution. 2 Connecting and Using a Source Device Great user manuals database on UserManuals.info...
Page 66: Connecting An External Monitor
Connecting and Using a Source Device Connecting an External Monitor DP OUT DP IN The following images are for reference only. Real-life situations may differ from what is shown in the images. 2 Connecting and Using a Source Device Great user manuals database on UserManuals.info...
Page 67: Connecting To A Video Device
Connecting and Using a Source Device Connecting to a Video Device Do not connect the power cable before connecting all other cables.  Ensure you connect a source device first before connecting the power cable. You can connect a video device to the product using a cable. ...
Page 68: Connection Using An Hdmi-Dvi Cable
Connecting and Using a Source Device 2.4.3 Connection Using an HDMI-DVI Cable HDMI IN RGB / DVI / HDMI / AV / COMPONENT AUDIO IN Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. ...
Page 69: Connecting To An Audio System
Connecting and Using a Source Device Using an HDMI cable or HDMI to DVI Cable (up to 1080p) For better picture and audio quality, connect to a digital device using an HDMI cable.  An HDMI cable supports digital video and audio signals, and does not require an audio cable. ...
Page 70: Connecting The Pc Module (Sold Separately)
Connecting and Using a Source Device Connecting the PC module (sold separately) 2.5.1 MagicInfo To use MagicInfo, a PC module must be connected to the product. For details on how to connect a PC module, refer to the PC module user manual. To change the MagicInfo settings, run "MagicinfoSetupWizard"...
Page 71 Connecting and Using a Source Device Enter the IP information. MagicInfo Setup Wizard - v.1.12 Select TCP/IP - step 2 Obtain an IP address automatically Use the following IP address: IP address: 192 . 168 . 0 . 102 Subnet mask: 255 .
Page 72 Connecting and Using a Source Device Select a display mode. MagicInfo Setup Wizard - v.1.12 Select Screen Type - step 4 Landscape Portrait < Back(B) Next(N) > Finish Cancel Double-check the settings you have just configured. MagicInfo Setup Wizard - v.1.12 Setup Information 1.
Page 73: Changing The Input Source
Connecting and Using a Source Device Changing the Input source 2.6.1 Source MENU Support Contents Home Source ENTER Source allows you to select a variety of sources and change source device names. Source You can display the screen of a source device connected to the product. Select a source from Source List to display the screen of the selected source.
Page 74: Using Mdc
Using MDC MDC (Multiple Display Control) is an application that allows you to easily control multiple display devices simultaneously using a PC. Configuring Settings for Multi Control MENU System Multi Control ENTER Assign an individual ID to your product. 3.1.1 Configuring settings for Multi Control ID Setup ...
Page 75: Mdc Programme Installation/Uninstallation
Using MDC MDC Programme Installation/Uninstallation 3.2.1 Installation Insert the installation CD into the CD-ROM drive. Click the MDC Unified installation programme. If a software installation window is not displayed on the main screen, install with the MDC Unified execution file in the MDC folder on the CD. Select a language for installation.
Page 76: What Is Mdc
Using MDC What is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. 3.3.1 Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor. RS232C IN / OUT 3 Using MDC Great user manuals database on...
Page 77 Using MDC Using MDC via Ethernet Enter the IP for the primary display device and connect the device to the PC. One display device can connect to another using an RS-232C serial cable. Connection using a direct LAN cable RJ45 Multiple products can be connected using the [RJ45] port on the product and the LAN ports on the HUB.
Page 78: Connection Management
Using MDC 3.3.2 Connection Management Connection management includes the Connection list and Connection list modification options. Connection list - Connection list shows the details of the connections such as connection setting (IP/ COM, Port No, MAC, and Connection Type), connection status, Set ID Range, and detected devices. Each connection can contain a maximum of 100 devices connected in serial daisy-chain fashion.
Page 79: User Login
Using MDC 3.3.3 User Login Launching the programme displays the user login window. The initial login ID (User Login: "admin") and password (password: "admin") are set to"admin". After logging in for the first time, make sure to change the password to ensure security. ...
Page 80: Auto Set Id
Using MDC 3.3.4 Auto Set ID Auto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection. There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisy- chain running from 1 to 99, and then finally to Set ID 0.
Page 81: Cloning
Using MDC 3.3.5 Cloning Using the Cloning feature, you can copy the setting of one LFD and apply it to multiple selected LFDs. You can select specific tab categories or all tab categories for cloning, using the copy setting option window.
Page 82: Command Retry
Using MDC 3.3.6 Command Retry This feature is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply from an LFD. The retry count value can be set using the MDC options window.
Page 83: Getting Started With Mdc
Using MDC 3.3.7 Getting Started with MDC To start the programmes, click Start Programmes Samsung MDC Unified. The login window appears after the MDC programme is launched. Enter the user ID and password. The default user ID and password are "admin".
Page 84: Main Screen Layout
Using MDC 3.3.8 Main Screen Layout Change the status of a display device or the properties of the Menu Bar programme. View a list of connected display devices or device groups. Device Category View a list of schedules for display devices. Schedule Category Select the display device you want to adjust.
Page 85: Menus
Using MDC 3.3.9 Menus You can power on or off a selected device or change the input source or volume of the device. Choose display devices from the list of sets, and select the Home tab. Home Select an item and change the corresponding setting. Power On: Power on a selected display.
Page 86 Using MDC Volume The volume can be changed or the sound can be muted only for displays that are turned on. Volume The volume can be adjusted using the slider bar in the range of 0 to 100.  Adjust the volume of a selected display. Mute Enable or disable Mute for a selected display.
Page 87 Using MDC User Login User Settings Add, delete or edit login information.  Logout Log out from the current user account as follows.  Click Logout. The message "Do you want to log admin out?" is displayed.  Click Yes. The user login window appears. ...
Page 88: Screen Adjustment
Using MDC 3.3.10 Screen Adjustment Custom The screen settings (contrast, brightness, etc.) can be adjusted.  Choose display devices from the list of sets, and select the Picture tab.  Select an item and change the corresponding screen setting.  Picture Mode Adjust the picture mode for the selected display device.
Page 89 Using MDC Colo(u)r Tone Adjust the background colour tone for the selected display device.  Colo(u)r Temp Adjust the colour temperature for the selected display device.  This option is enabled if Colo(u)r Tone is set to Off. HDMI Black Level Adjust the HDMI Black Level for the selected display device.
Page 90 Using MDC MPEG Noise Filter Reduces MPEG noise to provide improved picture quality. Off / Low / Medium / High / Auto  Smart LED Controls the LED backlight to maximize picture clarity. Cinema Black In Movie mode, this feature dims the top and bottom areas of the video image to provide a more immersive viewing experience.
Page 91: Advanced Features
Using MDC To automatically adjust the frequency, fine-tune or relocate the screen, click Auto Adjustment. 3.3.11 Advanced features 3D Control 3D Mode Select the 3D input format. 3D L/R Change Swap the left and right pictures. Displays the image for the left eye only. 3D Auto View If you set 3D Auto View to Message Notice, a pop up message window appears when the product receives a 3D signal.
Page 92 Using MDC 3D Expert Pattern View a 3D pattern. 3D Effect Adjust 3D effects like perspective and depth for your preferred 3D viewing experience. Auto: Automatically adjust the perspective and depth settings in accordance with the 3D input  source. Manual: Manually adjust the perspective and depth settings.
Page 93 Using MDC Colo(u)r Space Adjusts the range and variety of colour (the colour space) available to create images. Auto / Native / Custom  To adjust Colo(u)r ,Red ,Green ,Blue and Reset, set Colo(u)r Space to Custom. White Balance Adjust the colour temperature for a more natural picture. R-Offset / G-Offset / B-Offset ...
Page 94: Sound Adjustment
Using MDC 3.3.12 Sound Adjustment You can change the sound settings. Choose display devices from the list of sets, and select the Sound tab. The Bass or Treble item will be disabled if the item is not supported by the selected set. Bass Adjust the bass for the selected display.
Page 95 Using MDC Format Select the format to display the split screen. Full Natural Select the number of horizontal display devices. A maximum of 15 displays can be arranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to H. Select the number of vertical display devices.
Page 96 Using MDC Basic information required to adjust PIP will appear in the menu screen. PIP will be disabled when Video Wall is ON.  Note that Picture Size is disabled when PIP is ON.  PIP Size View the PIP Size of the current display. PIP Source Select a PIP input source.
Page 97 Using MDC General User Auto Colo(u)r Automatically adjust the screen colours. Available only in PC mode. Auto Power Set the product to automatically power on. Standby Control Set the standby mode to activate if an input source is not detected. Fan &...
Page 98 Using MDC Security Safety Lock Lock the on-screen menus. To unlock the menus, set Safety Lock to Off. Button Lock Lock the buttons on the display device. To unlock the buttons, set Button Lock to Off. OSD Display Source OSD Select whether to display a message when the Source is changed.
Page 99 Using MDC Time Clock Set Change the current time on the selected display device according to the time set on a PC. If the time is not set on the display device, null values will be displayed. Timer On Timer Repeat: Specify the period for which you want to repeat the selected Timer.
Page 100 Using MDC Off Timer Repeat: Specify the period for which you want to repeat the selected Timer.  Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, Manual Holiday Apply: The Holiday Management settings can be applied to the Timer.  Off Time: Set the time to power on the selected display device. ...
Page 101 Using MDC Screen Burn Protection Pixel Shift Move the screen slightly at specified time intervals to prevent screen burn-in. 3 Using MDC Great user manuals database on UserManuals.info...
Page 102 Using MDC Screen Saver Period (Hour) and Start Time and End Time can Time (Sec) can be configured be configured when Interval is when Repeat is selected. selected. This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time.
Page 103 Using MDC Safety Screen The Safety Screen function can be used to prevent screen burn-in when a stationary image displays on the screen of a display device for an extended period of time. Lamp Control Lamp Control is used to adjust the backlight to reduce power consumption. Automatically adjust the backlight of the selected display device at a specified time.
Page 104 Using MDC Ticker Input text while a video or image is displayed and display the text on the screen. Ticker Enable or disable Ticker.  Message Enter a message to display on the screen. Timer Set the Start Time and End Time to display a message (Message). Position Select an orientation to display a message (Message) from Horizontal and Vertical.
Page 105: Tool Settings
Using MDC 3.3.14 Tool Settings Security Panel Control Turn on or off the screen of a display device. Remote Control Enable or disable the remote control. Reset Reset Picture Reset the screen settings. Reset Sound Reset the sound settings. Reset System Reset the system settings.
Page 106 Using MDC Edit Column Options Configure the settings for the items that will be displayed on the list of displays. Language: Select a language to use in the MDC programme. After selecting a language, restart the MDC programme to use the selected language. Command Retry Count: Specify the number of retry attempts when a command fails.
Page 107 Using MDC Monitor Window A window appears showing details for data transfer between the computer and display devices. Filter  3 Using MDC Great user manuals database on UserManuals.info...
Page 108 Using MDC Information View the programme information. 3 Using MDC Great user manuals database on UserManuals.info...
Page 109: Other Functions
Using MDC 3.3.15 Other Functions Resizing a Window Place the mouse pointer on a corner of the programme window. An arrow will appear. Move the arrow to customize the size of the programme window. 3 Using MDC Great user manuals database on UserManuals.info...
Page 110 Using MDC Group Management Creating Groups Create groups and manage the list of sets on a group basis. Duplicate group names cannot be used. Right-click and select Group Edit in the display device list section on the left side of the programme window.
Page 111 Using MDC Add on the sub level: Create a sub-group under the selected group.  Enter the group name. Deleting Groups Select a group name, and click Edit. In the Edit Group window displayed, click Delete. Click Yes. The group will be deleted. Renaming Groups Select a group name, and click Edit.
Page 112 Using MDC Schedule Management Creating Schedules Create and register a schedule on a group basis. Click All Schedule List in the schedule section on the left side of the programme window. The Add button will be enabled in the middle. Click the Add button.
Page 113 Using MDC Click Add below the Device Group item, and select the group you want to add a schedule to. Select Date&Time/Action and click OK. The schedule will be added and a list of schedules will appear in the set list window. Device Group: Select a group.
Page 114: Troubleshooting Guide
Using MDC 3.3.16 Troubleshooting Guide Issue Solution The display you want to control Check the connection of the RS232C cable (check that the does not appear on the system cable is properly connected to appropriate serial port). information chart. Check that another display with a duplicate ID is not connected.
Page 115 Using MDC How display properties are shown when multiple displays are used When no display is selected: The default value is displayed. When one display is selected: Settings for the selected display are displayed. When two displays are selected (e.g. in sequence of ID 1 and ID 3): The settings for ID 1 are displayed before the settings for ID 3.
Page 116: Screen Adjustment
Screen Adjustment Configure the Picture settings (Brightness, Colo(u)r Tone, etc.). The layout of the Picture menu options may vary depending on the product. Picture Mode MENU Picture Picture Mode ENTER Select a picture mode (Picture Mode) suitable for the environment where the product will be used. Different Picture Mode options are displayed depending on the current input source.
Page 117: Picture Mode
Screen Adjustment 4.1.2 If the input source is AV, Component, HDMI Dynamic: This mode is suitable when the ambient light is bright.  Standard: This mode is generally suitable for any environment.  Natural: Suitable for reducing eye strain.  Movie: This mode reduces eye fatigue.
Page 118 Screen Adjustment Input source Picture Mode Adjustable options PC, DVI, Information Backlight Contrast Brightness Sharpness DisplayPort, Advertisement Backlight Contrast Brightness Sharpness Colo(u)r HDMI (when a Calibration Backlight PC is connected) AV, Component, Dynamic, Backlight Contrast Brightness Sharpness Colo(u)r HDMI Standard, Natural, Tint (G/R) Movie When you make changes to Backlight, Contrast, Brightness, Sharpness,...
Page 119: Picture Size
Screen Adjustment Screen Adjustment MENU Picture Screen Adjustment ENTER Screen Adjustment provides various picture size and aspect ratio options. Select an option using the arrow keys, and the press [ ]. Use the arrow keys to select an option in the sub-menu, and then press [ Different Screen Adjustment...
Page 120: Zoom/Position
Screen Adjustment 4:3: Sets the picture to basic (4:3) mode.  Do not set your product to 4:3 format for a long time. The borders displayed on the left and right, or top and bottom of the screen may cause image retention (screen burn) which is not covered by the warranty.
Page 121: Pc Screen Adjustment
Screen Adjustment Press the button to select Zoom/Position. Select the Zoom or Position. Press the [ ] button. Press the / / / button to move the picture. Press the [ ] button. Select Close by pressing the buttons sequentially. If you want to reset the picture to its original position, select Reset in the...
Page 122: Auto Adjustment
Screen Adjustment Auto Adjustment MENU Picture Auto Adjustment ENTER Picture Auto Adjustment The displayed image may differ depending on the model. Adjust frequency values/positions and fine tune the settings automatically. This option is available when the input source is PC. Rotation MENU Picture...
Page 123: Aspect Ratio
Screen Adjustment Aspect Ratio MENU Picture Aspect Ratio ENTER Picture Rotation Landscape · Aspect Ratio Full Screen The displayed image may differ depending on the model. Set the rotated screen to be either full screen or original. Full Screen: Display the rotated screen in full screen. ...
Page 124: Advanced Settings
Screen Adjustment Advanced Settings MENU Picture Advanced Settings ENTER To use, select an option using the up and down arrow keys, and then press [ ]. Use the arrow keys to change the value or setting, and then press [ Advanced Settings Dynamic Contrast Black Tone...
Page 125: Dynamic Contrast
Screen Adjustment Input Source Picture Mode Advanced Settings Component, HDMI Standard Dynamic Contrast Black Tone Flesh Tone Only Mode Colo(u)r Space White Balance Gamma Expert Pattern Motion Lighting Movie Dynamic Contrast Black Tone Flesh Tone Only Mode Colo(u)r Space White Balance White Balance Gamma Expert Pattern...
Page 126: White Balance (Off / On)
Screen Adjustment Reset: Resets the White Balance to its default settings.  4.7.7 10p White Balance (Off / On) Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness. Interval: Select interval to adjust. ...
Page 127: Picture Options
Screen Adjustment Picture Options MENU Picture Picture Options ENTER Select an option using the arrow keys, and the press [ ]. Use the arrow keys to change the setting, and then press [ Picture Options Colour Tone Colour Temp. 10000K Digital Noise Filter MPEG Noise Filter HDMI Black Level...
Page 128: Colo(U)R Tone
Screen Adjustment Input source Picture Mode Picture Options DisplayPort Information Colo(u)r Tone Colo(u)r Temp Dynamic Backlight Advertisement Colo(u)r Tone Colo(u)r Temp Digital Noise Filter MPEG Noise Filter Dynamic Backlight Calibration Dynamic Backlight HDMI Dynamic, Natural, Colo(u)r Tone Colo(u)r Temp Digital Noise Filter Movie, Standard MPEG Noise Filter...
Page 129: Hdmi Black Level
Screen Adjustment Medium High Auto  4.8.5 HDMI Black Level Selects the black level on the screen to adjust the screen depth. Normal  Available only in HDMI mode (AV Timing : 480p, 576p, 720p, 1080i, 1080p). 4.8.6 Film Mode Sets the product to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
Page 130: Reset Picture
Screen Adjustment Reset Picture MENU Picture Reset Picture ENTER Resets your current picture mode to its default settings. Picture Reset Picture The displayed image may differ depending on the model. 4 Screen Adjustment Great user manuals database on UserManuals.info...
Page 131: Sound Adjustment
Sound Adjustment Configure the sound (Sound) settings for the product. Sound Mode MENU[ Sound Sound Mode ENTER Use the up and down arrow keys to select an option, and then press [ Sound Sound Mode Standard Sound Effect Speaker Settings Reset Sound The displayed image may differ depending on the model.
Page 132: Sound Effect
Sound Adjustment Sound Effect MENU Sound Sound Effect ENTER Speaker Select is set to External, Sound Effect is disabled.  Available only when Sound Mode is set to Standard.  Virtual Surround (Off / On)  This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF(Head Related Transfer Function) technology.
Page 133: Reset Sound
Sound Adjustment Auto Volume (Off Normal / Night)  Normal equalizes the volume level on each channel, so that when you change channels, the volume level is the same. Night equalizes and decrease the volume level on each channel, so each channel is quieter. Night useful at night, when you may want to keep the volume low.
Page 134: Network
Network Network Setting 6.1.1 Connecting to a Wired Network There are three ways to attach your product to your LAN using cable. You can attach your product to your LAN by connecting the LAN port on the back of your product to ...
Page 135 Network access the Internet so you do not have to enter them manually. Most home networks are Dynamic Networks. Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your product Cable Setup Screen when you set up the network connection.
Page 136: Wired Network Settings
Set the network connection to use Internet services such as perform software upgrades. Network Settings No network cable or Samsung Wireless LAN Adapter connected. Please plug in a network cable or a Samsung Wireless Start LAN Adapter. Cancel The displayed image may differ depending on the model.
Page 137 Network On the dialog that appears, click the Support tab. On the Support Tab, click the Details button. The Network connection values are displayed. How to set up manually To set up your product cable network connection manually, follow these steps. Go to the Network Settings screen.
Page 138: Connecting To A Wireless Network
Network 6.1.3 Connecting to a Wireless Network To connect your product to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN adapter (WIS10ABGN, WIS12ABGNX) , which you connect to your product back or side panel USB port.
Page 139: Wireless Network Setting
Network The product may not recognize the “Samsung Wireless LAN adapter” if you connect it to the  product with a USB hub or USB extension cable other than the cable supplied with the product. 6.1.4 Wireless Network Setting Automatic Network Setup...
Page 140 Network Manual Network Setup Use the Manual Network Settings when connecting your product to a network that requires a Static IP address or if the automatic connection process has failed. Getting the Network Connection Values To view the Network connection values on most Windows computers, follow these steps. Right click the Network icon on the bottom right of the screen.
Page 141: Wps(Pbc)
Network Enter the next portion of the Address. Press the button to go to the next field. Repeat the entry process for each field in the Address. If you make a mistake when entering a number, re-enter the number to correct it. You can also press the button to change the number one unit at a time.
Page 142: Network Status
Network Network Status MENU Network Network Status ENTER You can check the current network and Internet status. Network Status Your wireless network and Internet connection are setup and ready to use. MAC Address 00 : 12 : fb : df : 29 : 76 ***.
Page 143: Soft Ap
Network Soft AP MENU Network Soft AP ENTER Using this function, you can connect the product on your mobile devices if your mobile devices do not support Wi-Fi Direct. Set the options for connection of Wi-Fi device. Soft AP  Turns on or off the Soft AP.
Page 144: Allshare Settings
Network AllShare Settings MENU Network AllShare Settings ENTER Shows a list of mobile phones or connected devices which have been set up to use the AllShare Play function with this product. Allow / Deny: Allows/Blocks the devices.  Delete from the list: Deletes the devices from the list.
Page 145: System
System Multi Control MENU System Multi Control ENTER Assign an individual ID to your product. 7.1.1 Configuring settings for Multi Control ID Setup  Assign an ID to a set. (Range: 0~99) Press to select a number, and press [ ID Input ...
Page 146: Time
System Time MENU[ System Time ENTER You can configure Clock Set Sleep Timer. You can also set the product to automatically turn on or off at a specified time using the Timer function. 7.2.1 Clock set Set the clock to use the various various timer features of the product. Changing the Setting for Clock Clock Set ...
Page 147: On Timer
System 7.2.3 On Timer On Timer so that your product turns on automatically at a time and on a day of your choosing. Timer: Set the on timer by making a selection from one of the seven options. Ensure you set the ...
Page 148: Holiday Management
System 7.2.5 Holiday Management Timer will be disabled during a period specified as a holiday. Setting Holiday Management Add: Specify the period you want to add as a holiday.  Select the start and end dates of the holiday you want to add using the buttons, and click ...
Page 149: Language
System Language MENU[ System Language ENTER Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. Rotate menu(Rotate Menu) MENU[ System Rotate menu(Rotate Menu)
Page 150: Eco Sensor (Off / On)
System While Energy Saving mode is active, the product power consumption will be controlled to save power. Medium High Picture Off  7.5.2 Eco Sensor (Off / On) To enhance your power savings, the picture settings will automatically adapt to the light in the room. Adjusting the Backlight setting under...
Page 151: Security
System Security MENU System Security ENTER Every time you access the Security functions, the PIN screen will appear and the default PIN number is “0-0-0-0". The PIN screen closes and the Security menu appears. Security Safety Lock Button Lock Change PIN The displayed image may differ depending on the model.
Page 152: Pip
System MENU System ENTER If you have set Double ( ) mode in (Picture-in-Picture), you cannot adjust the Picture  Size. For PIP sound, refer to the Sound Select instructions.  If you turn the product off while watching in the mode, mode will remain after power ...
Page 153: Screen Burn Protection
System 2 hours 4 hours 8 hours 10 hours  Screen Burn Protection MENU System Screen Burn Protection ENTER To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn prevention technology. Pixel Shift moves the picture slightly on the screen. The Pixel Shift Time setting allows you to programme the time between movements of the picture in minutes.
Page 154: Timer
System 7.9.2 Timer You can set the timer for Screen Burn Protection. Timer  Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals  (Period). Period Time can be configured when Repeat is selected. Interval: Display the image retention-preventive pattern set in Mode for a specified period of time ...
Page 155: Side Grey(Side Gray)
System 7.9.4 Side Grey(Side Gray) When the screen is set to aspect ratio, adjust the brightness of white margins on sides to protect the screen. Light Dark  7.10 Ticker Input text while a video or image is displayed and display the text on the screen. ...
Page 156: Video Wall
System 7.11 Video Wall MENU System Video Wall ENTER Customize the layout of multiple displays that are connected to form a video wall. In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays. To display multiple images, refer to MDC Help or the MagicInfo user guide.
Page 157: Vertical
System 7.11.3 Horizontal This function automatically divides the screen according to the specified number of horizontal displays. Enter the number of horizontally arranged displays. The horizontal screen will automatically be divided according to the number entered. A maximum of 15 displays can be assigned to the horizontal arrangement. The screen can be divided into a maximum of 100 screens (horizontal and vertical screens ...
Page 158: Source Autoswitch Settings
System 7.12 Source AutoSwitch Settings MENU System Source AutoSwitch Settings ENTER Turning on the display with Source AutoSwitch On, and the previous video source selection is not active, the display will automatically search the different video input sources for active video. Source AutoSwitch ...
Page 159: General
System 7.13 General MENU System General ENTER General Max. Power Saving Game Mode BD Wise Menu Transparency Medium Sound Feedback Auto Power Standby Control Auto The displayed image may differ depending on the model. 7.13.1 Max. Power Saving Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time.
Page 160: Bd Wise
System 7.13.3 BD Wise Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theatre products which support Wise. When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution. Available when you connect Samsung products that support...
Page 161: Lamp Schedule
System 7.13.8 Lamp Schedule Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode.  7.13.9 OSD Display Displays or hides a menu item on the screen. Source OSD No Signal OSD MDC OSD ...
Page 162: Anynet+(Hdmi-Cec)
Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. You can only control Anynet+ devices using the product remote control, not the buttons on the ...
Page 163: Auto Turn Off (No / Yes)
System Anynet+ Menu Description (device_name) Tools Shows the tools menu of the connected device. E.g. if a DVD player is connected, the tools menu of the DVD player will appear. Depending on the device, this menu may not be available. (device_name) Title Menu Shows the title menu of the disc in the connected device.
Page 164 System Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work. Check if the device is an Anynet+ device. The Anynet+ system  supports Anynet+ devices only. Check if the Anynet+ device power cord is properly connected.  Check the Anynet+ device’s Video/Audio/HDMI cable ...
Page 165: Divx® Video On Demand
System 7.15 DivX® Video On Demand MENU System DivX® Video On Demand ENTER Shows the registration code authorized for the product. If you connect to the DivX web site and register using that code, you can download the VOD registration file. For more information about DivX®...
Page 166: Reset System
System 7.18 Reset System MENU System Reset System ENTER This option returns the current settings under system to the default factory settings. 7.19 Reset All MENU System Reset All ENTER This option returns all the current settings for a display to the default factory settings. (Language, Security, Time, Multi Control Anynet+...
Page 167: Support
Support Software Update MENU Support Software Update ENTER Software Update menu lets you upgrade your products software to the latest version. Current Version: This is the software version already installed in the product.  Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically after completing the software update.
Page 168: Contact Samsung
Support Contact Samsung ENTER [ MENU Support Contact Samsung View this information when your product does not work properly or when you want to upgrade the software. You can find information regarding our call centres and how to download products and software.
Page 169: Magicinfo Videowall S
Support Play content files and templates from USB memory or built-in memory. Alternatively, play content files and templates via MagicInfo Premium Server over a network. Refer to page 221 for details about the MagicInfo Premium S menu. 8.3.3 MagicInfo Videowall S ENTER [ MENU Support...
Page 170 Support 8.3.5 Source Source allows you to select a variety of sources and change source device names. You can display the screen of a source device connected to the product. Select a source from Source List to display the screen of the selected source. The input source can also be changed by using the SOURCE button on the remote control.
Page 171: Allshare Play
Before connecting a USB device to the product, back up files to ensure your data is not damaged or  lost. Samsung Electronics is not liable for any damage or loss of data. Do not remove a USB device while it is loading.
Page 172 AllShare Play The screensaver activates if the product is left idle for a period of time specified in Auto Protection  Time. Power-saving mode on some external hard disk drives may automatically deactivate after  connecting to the product. File system and formats Allshare play may not function properly with unlicensed multimedia files.
Page 173: Using A Usb Device
AllShare Play 9.1.2 Using a USB device Connecting a USB device Turn on your product. Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. A message "New device connected"...
Page 174: Connecting To A Pc Over A Network
To view content saved on the PC, connect the product and PC to the same wireless router and visit  http://www.samsung.com to download the AllShare PC software. Ensure the product and PC are connected to the same network subnet. All IP addresses are made ...
Page 175: Using The Allshare Play Features
 Search with file names  And many others  A compatibility issue may occur if a video file is played when a server not provided by Samsung  Electronics is connected. To use AllShare Play, go to http://www.samsung.com and download the AllShare software.
Page 176: Using The Basic Allshare Play Features
AllShare Play Using the Basic AllShare Play Features MENU Support Contents Home AllShare Play ENTER AllShare Play A ll / My list / Recently Played My list Recently played ﬁles will be displayed here. Videos What's new Updated ﬁles will be displayed here. Photos Playlist Music...
Page 177: Playing Selected Files
AllShare Play 9.2.2 Playing Selected Files Select files from the list of Videos, Photos, or Music files. Press TOOL on the remote control and select Play selection(Selection Play). The option does not appear if a folder is highlighted by the cursor. Select files and press Play.
Page 178: Creating A Playlist
AllShare Play 9.2.4 Creating a Playlist Select files from the list of Videos, Photos, or Music files. Press TOOL on the remote control and select Add to Playlist. The option does not appear if a folder is highlighted by the cursor. Select files and press Add.
Page 179: My List(My List) Options
AllShare Play My list(My List) MENU Support Contents Home AllShare Play My list(My List) ENTER Access desired content more conveniently and quickly. and press [ To play files, select files or a Playlist Recently played: Display video, photo or music files that were recently played. This mode is suitable ...
Page 180: Videos
AllShare Play Videos MENU Support Contents Home AllShare Play Videos ENTER 9.4.1 Playing a Video Select the internal memory or a USB device. Select files from the list of files. Press the [ ] button or [ ] (Play) button. ▶...
Page 181: Photos
AllShare Play Photos MENU Support Contents Home AllShare Play Photos ENTER 9.5.1 Viewing a Photo (or Slide Show) Select the internal memory or a USB device. Select a file from the list of files. Press the [ ] button. To view files manually, one at a time, press the left or right arrow buttons. ...
Page 182: Music
AllShare Play Music MENU Support Contents Home AllShare Play Music ENTER 9.6.1 Playing Music Select the internal memory or a USB device. Select files from the list of files. Press the [ ] button or [ ] (Play) button. ▶ When the music is playing, you can search using the [ ] (REW) and [ ] (FF) button.
Page 183: Videos / Photos / Music Play Option Menu
AllShare Play Videos / Photos / Music Play Option menu When playing video or photo files, you can press the TOOLS button to display an Options menu. Option Name Operations Videos Photos Music Sort music files grouped by Folder view, Title, View Artist, Album...
Page 184 AllShare Play Option Name Operations Videos Photos Music You can start or stop a slide show. Start Slide Show Stop Slide Alternatively, use the button on the ▶ Show remote. You can select the slide show speed during Slide Show the slide show.
Page 185: Supported Subtitle And Allshare Play File Formats
AllShare Play Supported Subtitle and AllShare Play file formats 9.8.1 Subtitle External Internal MPEG-4 timed text (.ttxt) Xsub   Container: AVI SAMI (.smi)  SubRip (.srt) SubStation Alpha   Container: MKV SubViewer (.sub)  Micro DVD (.sub or .txt) Advanced SubStation Alpha ...
Page 186: Supported Music File Formats
AllShare Play 9.8.3 Supported music file formats File Extension Type Codec Comments *.mp3 MPEG MPEG1 Audio Layer 3 *.m4a *.mpa MPEG4 *.aac *.3ga The Seek (jump) function is not supported. *.flac FLAC FLAC Supports up to 2 channel 9.8.4 Supported Video Formats Video content will not play, or not play correctly, if there is an error in the content or the container.
Page 187 AllShare Play Frame rate Bit rate File Audio Container Video Codec Resolution Extension Codec (fps) (Mbps) *.avi DIVX 3.11 / 4.x / 5.x / 6.x *.mkv *.asf MPEG4 SP / *.wmv *.mp4 LPCM *.mov H.264 BP / MP / ADMPCM *.3gp (IMA, MS) 1920 x 1080...
Page 188: Magicinfo Lite
MagicInfo Lite 10.1 File Formats Compatible with MagicInfo Lite Player To launch MagicInfo Lite, select MagicInfo Lite for the Play Mode(Player Mode) on the System. [Read before using MagicInfo Lite Player] The file system supports FAT16, FAT32 and NTFS.  A file with a vertical and horizontal resolution larger than the maximum resolution cannot be ...
Page 189: Magicinfo Lite
MagicInfo Lite 10.1.1 Contents Frame rate Bit rate File Audio Container Video Codec Resolution Extension Codec (fps) (Mbps) *.avi DIVX 3.11 / 4.x / 5.x / 6.x *.mkv *.asf MPEG4 SP / *.wmv *.mp4 *.mov H.264 BP / MP / LPCM *.3gp 1920 x 1080...
Page 190 MagicInfo Lite Video 3D video is not supported.  Content with a resolution larger than the resolution specified in the table above is not supported.  Video content with a Bit rate or Frame rate larger than the rate specified in the table above can ...
Page 191 MagicInfo Lite Flash Compatible with Flash 10.1  Flash Animation  Compatible file format : SWF  Recommended resolution : 960 x 540  Caution  Performance comparable to Flash Player on a Windows operating system cannot be guaranteed Optimization is needed during content creation Flash Video ...
Page 192 MagicInfo Lite Compatible document file formats  Extension : pdf  Functions not supported  Content less than 1 pixel not supported because of performance degradation issue.  Masked Image, Tiled Image content not supported.  Content with Rotated Text, not supported. ...
Page 193 MagicInfo Lite Approving a connected device from the server Access the server you have assigned to your device. Enter your ID and password to log in. Select Device from the top menu bar. Select Lite from the menus on the left. Select Unapproved from the sub-menus of Lite.
Page 194 MagicInfo Lite Select the Approve button for your device from the list of unapproved Lite devices. Enter the information required to approve the device. Device Name: Enter the device name.  Device Group: Select to specify the group.  Location: Enter the current location of the device. ...
Page 195 MagicInfo Lite Setting the current time A schedule may not run if the time set on the device is different from the server's current time. Go to the tabs Device Time. Select your device. Select Clock Set, and sync the time with the server. When connecting to the server for the first time, the time on the product is set using the GMT ...
Page 196 MagicInfo Lite 10.2 MagicInfo Lite MENU Support Contents Home MagicInfo Lite ENTER To launch MagicInfo Lite, select MagicInfo Lite for the Play Mode(Player Mode) on the  System. Press the MagicInfo Lite/S button on the remote control.  10.2.1 Network Schedule You can view whether the server is connected (approval) in the MagicInfo Lite menu screen.
Page 197: Network Schedule
MagicInfo Lite Select Network schedule in the MagicInfo Lite player menu. MagicInfo Lite player Network schedule Local schedule Internal AutoPlay Close USB AutoPlay Mode Server Local schedule Connected Disconnected Return 10 MagicInfo Lite Great user manuals database on UserManuals.info...
Page 198: Network Schedule
MagicInfo Lite 10.2.2 Local schedule Go to Local schedule Manager Select the content you want to run This menu is disabled if there was no schedule run previously in Local schedule Manager. Select Local schedule in the MagicInfo Lite player menu screen.
Page 199 MagicInfo Lite 10.2.3 Internal AutoPlay The option is enabled only when there is at least one content item, except for music files, in Internal Memory. Select Internal AutoPlay in the MagicInfo Lite player menu screen. Play content, which has been copied to Internal Memory, in alphabetical order.
Page 200 MagicInfo Lite 10.2.4 USB AutoPlay The option is enabled only when there is at least one content item, except for music files, in the  "MagicInfoSlide" folder on USB Storage. Ensure a USB device is inserted. Be sure to create a folder named "MagicInfoSlide" in the USB ...
Page 201: Registering A Local Schedule
MagicInfo Lite 10.3 Local Schedule Manager Configure the settings for playback from Local schedule. Alternatively, select and play content from internal or USB memory according to the customized playback sequence. 10.3.1 Registering a Local schedule Select Local Schedule Manager in the MagicInfo Lite menu screen.
Page 202 MagicInfo Lite Select Time to set the time you want to play content. Create Time --:-- am ~ --:-- pm Contents No Item Time --:-- am~ --:-- pm Save Contents No Items Cancel Return A maximum of 24 schedules can be created. ...
Page 203 MagicInfo Lite Select Duration Duration Content Duration Menu1.jpg 00:00:05 Menu2.jpg 00:00:05 Down Save Cancel Return Specify the sequence and time duration to play content files. Changing the playing sequence  Select a content file and change the sequence using the Down button.
Page 204 MagicInfo Lite Check that the schedule has been added to the Local Schedule Manager. Local Schedule Manager Create Storage Internal Memory Edit No Playing Schedule Delete All schedule 2012.01.01_1834.lsch Info Copy Close Return 10 MagicInfo Lite Great user manuals database on UserManuals.info...
Page 205: Modifying A Local Schedule
MagicInfo Lite 10.3.2 Modifying a Local schedule Ensure at least one Local schedule is registered. Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Close Settings Mode Server Local schedule Connected Connected Return...
Page 206 MagicInfo Lite Select Edit. Edit Time 12:00 am ~ 12:00 pm Delete Content Menu1.jpg Menu2.jpg Time --:-- am ~ --:-- pm Save Content No Item Cancel Time --:-- am ~ --:-- pm Content No Item Return Change the details of the local schedule. Next, select Save. 10 MagicInfo Lite Great user manuals database on UserManuals.info...
Page 207: Deleting A Local Schedule
MagicInfo Lite 10.3.3 Deleting a Local schedule Ensure at least one Local schedule is registered. Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Close Settings Mode Server Local schedule Connected Connected Return...
Page 208: Running A Local Schedule
MagicInfo Lite 10.3.4 Running a Local schedule Ensure at least one Local schedule is registered. Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Close Settings Mode Server Local schedule Connected Connected Return...
Page 209: Stopping A Local Schedule
MagicInfo Lite 10.3.5 Stopping a Local Schedule This function is enabled only when a schedule is running. Selecting Stop will change the running mode from Local schedule Network schedule. Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager...
Page 210: Viewing The Details Of A Local Schedule
MagicInfo Lite 10.3.6 Viewing the details of a Local schedule Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Close Settings Mode Server Local schedule Connected Connected Return Select the local schedule you want to view the details of. Local Schedule Manager Create Storage...
Page 211 MagicInfo Lite The details of the schedule will be displayed. Information 2012.01.01_1834.lsch 12:00 am~12:00 pm, 2 File(s) - Menu1.jpg Menu2.jpg Close Return 10 MagicInfo Lite Great user manuals database on UserManuals.info...
Page 212: Copying A Local Schedule
MagicInfo Lite 10.3.7 Copying a Local schedule Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Close Settings Mode Server Local schedule Connected Connected Return Select a storage device where the local schedule files to copy are saved. Local Schedule Manager Local Schedule Manager Internal Memory...
Page 213 MagicInfo Lite Select local schedule files and press Copy. Local Schedule Manager Create Storage Internal Memory Edit No Playing Schedule Delete All schedule 2012.01.01_1834.lsch Info Copy Close Return A window appears asking if you want to copy the files to the Internal Memory memory device.
Page 214 MagicInfo Lite 10.4 Content Manager 10.4.1 Copying content Select Content manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Close Settings Mode Server Local schedule Connected Connected Return Select the content you want to copy. Content manager Internal Memory No Item...
Page 215 MagicInfo Lite 10.4.2 Deleting content Select Content manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Close Settings Mode Server Local schedule Connected Connected Return Select the content you want to delete. Next, select Delete. Content under Internal Memory memory can be deleted at the same time.
Page 216 MagicInfo Lite 10.5 Settings The displayed image may differ depending on the model. Settings Server Network Settings Default content duration Content ratio Close Image Effect Random Default content None Screen layout Landscape Schedule Name YYYYMMDD Safety Remove USB Device Return 10.5.1 Server Network Setting To run MagicInfo...
Page 217 MagicInfo Lite If a Network Settings is running when USB memory is not connected, the default content will run. 10.5.2 Default content duration Specify the duration to play content. Image Viewer Time, PPT Viewer Time, PDF viewier time, Flash viewer time ...
Page 218 MagicInfo Lite 10.5.8 Safety Remove USB Device(Safety Remove USB) Safely removes USB memory 10.5.9 Delete all content Delete all the content files in Internal Memory. 10.5.10 Reset Settings Restore all the values under Settings to the default when the product was purchased. 10 MagicInfo Lite Great user manuals database on UserManuals.info...
Page 219 MagicInfo Lite 10.6 When Content is Running 10.6.1 Viewing the details of the content that is running The displayed image may differ depending on the model. Information Software Version : A-LUBXGDSP-0100.9 Device Name : Monitor Device ID : FF-FF-FF-FF-FF-FF Mode : Local schedule Server : Disconnected...
Page 220 MagicInfo Lite 10.6.2 Changing the settings for the content that is running The displayed image may differ depending on the model. Tools Picture Mode Standard Sound Mode Standard Background Music Background Music Setting Safely Remove USB Device Return Press the TOOLS button on the remote control.
Page 221 11.1 File Formats Compatible with MagicInfo Premium S Player A licence needs to be purchased to use MagicInfo Premium  To download the software, go to the Samsung homepage at http://www.samsunglfd.com.  To purchase a licence, contact a Customer Server Centre.  To launch...
Page 222 MagicInfo Premium S Video 3D video is not supported.  Content with a resolution larger than the resolution specified in the table above is not supported.  Video content with a Bit rate or Frame rate larger than the rate specified in the table above can ...
Page 223 MagicInfo Premium S Flash Compatible with Flash 10.1  Flash Animation  Compatible file format : SWF  Recommended resolution : 960 x 540  Caution  Performance comparable to Flash Player on a Windows operating system cannot be guaranteed Optimization is needed during content creation Flash Video ...
Page 224 MagicInfo Premium S Compatible document file formats  Extension : pdf  Functions not supported  Content less than 1 pixel not supported because of performance degradation issue.  Masked Image, Tiled Image content not supported.  Content with Rotated Text, not supported. ...
Page 225 MagicInfo Premium S 11.1.1 Network Schedule Multiframe Playback restrictions A maximum of two video (Videos) files can be played.  mode is enabled, more than one video (Videos) file cannot be played.  More than one Flash files cannot be played. ...
Page 226 MagicInfo Premium S Sound output restrictions More than one sound output cannot be used.  Playback priority: Flash file > network BGM > local BGM > video file in the main frame selected by  the user. User-selected main frame: Sound output can be selected in step 3 while authoring in Template Manager 11.1.3 Others...
Page 227 MagicInfo Premium S Approving a connected device from the server Access the server you have assigned to your device. Enter your ID and password to log in. Select Device from the top menu bar. Select Premium from the menus on the left. 11 MagicInfo Premium S Great user manuals database on UserManuals.info...
Page 228 MagicInfo Premium S Select Unapproved from the sub-menus of Premium. Select the Approve button for your device from the list of unapproved Lite devices. Enter the information required to approve the device. Device Name: Enter the device name.  Device Group: Select to specify the group.
Page 229 MagicInfo Premium S Select the menu to check that the device has been registered. When the device is approved by the server, the schedule registered in the selected group will be downloaded to the device. The schedule will run after it is downloaded. For further details on how to configure a schedule, refer to the <MagicInfo Lite Server user's ...
Page 230 MagicInfo Premium S Setting the current time A schedule may not run if the time set on the device is different from the server's current time. Go to the tabs Device Time. Select your device. Select Clock Set, and sync the time with the server. When connecting to the server for the first time, the time on the product is set using the GMT ...
Page 231 MagicInfo Premium S 11.2 MagicInfo Premium S MENU Support Contents Home MagicInfo Premium S ENTER To launch MagicInfo Premium S, select MagicInfo Premium S for the Play Mode(Player Mode)  on the System. Press the MagicInfo Lite/S button on the remote control. ...
Page 232 MagicInfo Premium S Select Network Schedule in the MagicInfo Premium S Player menu. MagicInfo Premium S Player Network schedule Local schedule Template Player Close Internal AutoPlay USB AutoPlay Mode Server Local schedule Connected Connected Return 11.2.2 Local Schedule Go to Local Schedule Manager Select the content you want to run This menu is disabled if there was no schedule run previously in...
Page 233 MagicInfo Premium S 11.2.3 Template Player Go to Template Manager Select the content you want to run Manager This menu is disabled if there was no schedule run previously in Template Select Template Player in the MagicInfo Premium S Player menu screen.
Page 234 MagicInfo Premium S 11.2.4 Internal AutoPlay The option is enabled only when there is at least one content item, except for music files, in Internal Memory. Select Internal AutoPlay in the MagicInfo Premium S Player menu screen. Play content, which has been copied to Internal Memory, in alphabetical order.
Page 235 MagicInfo Premium S 11.2.5 USB AutoPlay The option is enabled only when there is at least one content item, except for music files, in the  "MagicInfoSlide" folder on USB Storage. Ensure a USB device is inserted. Be sure to create a folder named "MagicInfoSlide" in the USB ...
Page 236 MagicInfo Premium S 11.3 Local Schedule Manager Configure the settings for playback from Local Schedule. Alternatively, select and play content from internal or USB memory according to the customized playback sequence. 11.3.1 Registering a Local Schedule Select Local Schedule Manager in the MagicInfo Premium S menu screen.
Page 237 MagicInfo Premium S Select Time to set the time you want to play content. Create Time --:-- am ~ --:-- pm Contents No Item Time --:-- am~ --:-- pm Save Contents No Items Cancel Return A maximum of 24 schedules can be created. ...
Page 238 MagicInfo Premium S Select Duration Duration Contents Duration Menu1.jpg 00:00:05 Menu2.jpg 00:00:05 Down Save Cancel Return Specify the sequence and time duration to play content files. Changing the playing sequence  Select a content file and change the sequence using the Down button.
Page 239 MagicInfo Premium S Check that the schedule has been added to the Local Schedule Manager. Local Schedule Manager Create Storage Internal Memory Edit No Playing Schedule Delete All Schedules Play 2012.01.01_1834.lsch Info Copy Close Return 11 MagicInfo Premium S Great user manuals database on UserManuals.info...
Page 240 MagicInfo Premium S 11.3.2 Modifying a Local Schedule Ensure at least one Local Schedule is registered. Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Player Local Schedule Manager Template Manager Close Content Manager Settings Mode...
Page 241 MagicInfo Premium S Select Edit. Edit Time 12:00 am~ 12:00 pm Delete Contents Menu1.jpg Menu2.jpg Time --:-- am ~ --:-- pm Save Contents No Items Cancel Time --:-- am ~ --:-- pm Contents No Items Return Change the details of the local schedule. Next, select Save. 11 MagicInfo Premium S Great user manuals database on UserManuals.info...
Page 242 MagicInfo Premium S 11.3.3 Deleting a Local schedule Ensure at least one Local schedule is registered. Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Player Local Schedule Manager Template Manager Close Content Manager Settings Mode...
Page 243 MagicInfo Premium S 11.3.4 Running a Local Schedule Ensure at least one Local schedule is registered. Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Player Local Schedule Manager Template Manager Close Content Manager Settings Mode...
Page 244 MagicInfo Premium S 11.3.5 Stopping a Local Schedule This function is enabled only when a schedule is running. Selecting Stop will change the running mode from to Local schedule Network schedule Select Local Schedule Manager in the MagicInfo Premium S menu screen.
Page 245 MagicInfo Premium S 11.3.6 Viewing the details of a Local Schedule Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Player Local Schedule Manager Template Manager Close Content Manager Settings Mode Server Mode Server Local schedule...
Page 246 MagicInfo Premium S The details of the schedule will be displayed. Information 2012.01.01_1834.lsch 12:00 am~12:00 pm, 2 File(s) - Menu1.jpg Menu2.jpg Close Return 11 MagicInfo Premium S Great user manuals database on UserManuals.info...
Page 247 MagicInfo Premium S 11.3.7 Copying a Local Schedule Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Player Local Schedule Manager Template Manager Close Content Manager Settings Mode Server Mode Server Local schedule Local schedule Connected Connected...
Page 248 MagicInfo Premium S Select local schedule files and press Copy. Local Schedule Manager Create Storage Internal Memory Edit No Playing Schedule Delete All schedule 2012.01.01_1834.lsch Info Copy Close Return A window appears asking if you want to copy the files to the Internal Memory memory device.
Page 249 MagicInfo Premium S 11.4 Template Manager 11.4.1 Registering a Template Select Template Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Player Local Schedule Manager Template Manager Close Content manager Server Mode Connected Connected Local schedule Return Select Create...
Page 250 MagicInfo Premium S Select a template in Landscape Portrait mode. Create Select a template. Landscape Portrait Next Cancel Interlaced signal rotation is not supported. Organize a template by inserting text, video, photo, or PDF files as desired. Create Select the position and the background. Use background image Preview Previous...
Page 251 MagicInfo Premium S Content Content Type None Content No Item Size Fit to screen Source Cancel Return Type: Select a file type to use to organize a template.  Videos Image Flash Office  Content: Select a file saved in Internal Memory or a device.
Page 252 MagicInfo Premium S Select sound or background music. Create Create Select sound or background music. Background Music Priview Previous Next Cancel If two Videos files are assigned, select the file with the sound you want to use.  If one of the video files includes content, sound from the content can be selected.
Page 253 MagicInfo Premium S Check that the template has been added to the Template Manager. Template Manager Create Storage Internal Memory Edit No Playing Template Copy All Templates Delete 20130101_2222.tlfd Preview Close Return 11 MagicInfo Premium S Great user manuals database on UserManuals.info...
Page 254 MagicInfo Premium S 11.5 Content Manager 11.5.1 Copying content Select Content manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Player Local Schedule Manager Template Manager Close Content manager Setting Mode Server Local schedule Connected Connected Return Select the content you want to copy.
Page 255 MagicInfo Premium S 11.5.2 Deleting content Select Content Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Player Local Schedule Manager Template Manager Close Content manager Setting Mode Server Local schedule Connected Connected Return Select the content you want to delete. Next, select Delete. Content under Internal Memory memory can be deleted at the same time.
Page 256 MagicInfo Premium S 11.6 Settings The displayed image may differ depending on the model. Settings Server Network Settings Default content duration Content ratio Close Image Effect Random Default content None Screen layout Landscape Schedule Name YYYYMMDD Safety Remove USB Device Return 11.6.1 Server Network Setting To run...
Page 257 MagicInfo Premium S If a Network schedule is running when USB memory is not connected, the default content will run. 11.6.2 Default content duration Specify the duration to play content. Image Viewer Time, PPT Viewer Time, PDF Viewer time, Flash viewer time ...
Page 258 MagicInfo Premium S 11.6.9 Delete all content Delete all the content files in Internal Memory. 11.6.10 Reset Settings Restore all the values under Settings to the default when the product was purchased. 11 MagicInfo Premium S Great user manuals database on UserManuals.info...
Page 259 MagicInfo Premium S 11.7 When Content is Running 11.7.1 Viewing the details of the content that is running The displayed image may differ depending on the model. Information Software Version : A-LUBXGDSP-0100.9 Device Name : Monitor Device ID : FF-FF-FF-FF-FF-FF Mode : Local schedule Server...
Page 260 MagicInfo Premium S 11.7.2 Changing the settings for the content that is running The displayed image may differ depending on the model. Tools Picture Mode Standard Sound Mode Standard Background Music Background Music Setting Safely Remove USB Device Return Press the TOOLS button on the remote control.
Page 261 12.1 File Formats Compatible with MagicInfo Videowall S Player A licence needs to be purchased to use MagicInfo Videowall  To download the software, go to the Samsung homepage at http://www.samsunglfd.com.  To purchase a licence, contact a Customer Server Centre.  To launch...
Page 262 MagicInfo Videowall S Video 3D video is not supported.  Content with a resolution larger than the resolution specified in the table above is not supported.  Video content with a Bit rate or Frame rate larger than the rate specified in the table above can ...
Page 263 MagicInfo Videowall S 12.1.1 Restrictions Only one video (Videos) file can be played per client.  Different content files can be played on the displays of a video wall. Two video (Videos) files cannot be played on a single display of a video wall. Available Available Not available...
Page 264 MagicInfo Videowall S 12.2 MagicInfo Videowall S MENU Support Contents Home MagicInfo Videowall S ENTER Return To launch MagicInfo Videowall S, select MagicInfo Videowall S for the Play Mode(Player  Mode) on the System. Press the MagicInfo Lite/S button on the remote control. ...
Page 265 MagicInfo Videowall S 12.2.4 Screen Layout Change the screen orientation to landscape or portrait view. Landscape Portrait  12.2.5 Port Check the port number of the server. Use 51001 as the port number. If unable to connect to the server using port number 51001, check with your server administrator to ...
Page 266 MagicInfo Videowall S 12.3 When Content is Running The displayed image may differ depending on the model. Information Software Version : A-LUBXGDSP-0100.18 Device Name : Monitor Device ID : FF-FF-FF-FF-FF-FF : Connected Cancel Press the INFO button on the remote control. Software Version: Displays the software version of a device ...
Page 267 13.1 Requirements Before Contacting Samsung Customer Service Centre 13.1.1 Testing the Product Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. Check if your product is operating normally by using the product test function.
Page 268 Troubleshooting Guide 13.1.3 Check the followings. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are found at the top and bottom Blank spaces on the screen are not caused by of the screen when an HDMI or HDMI-DVI the product.
Page 269 Troubleshooting Guide Screen issue The screen is not clear. The screen is blurry. Adjust Coarse and Fine. Remove any accessories (video extension cable, etc) and try again. Set the resolution and frequency to the recommended level. The screen appears unstable and shaky. Check that the resolution and frequency of the PC and graphics card are set within a range There are shadows or ghost images left on the...
Page 270 These lines are displayed when there is a screen. defect in DATA SOURCE DRIVER IC on the monitor. Contact a Samsung Service Centre to resolve the issue. The display looks unstable and then freezes. The screen may freeze when a resolution other than the recommended resolution is used or if the signal is not stable.
Page 271 Troubleshooting Guide Screen issue The screen cannot be displayed in full screen. A scaled SD (4:3) content file can cause black bars on both sides of an HD channel screen. A video with an aspect ratio different from the product can cause black bars at the top and bottom of the screen.
Page 272 Troubleshooting Guide Sound issue There is static coming from the speakers. Check the cable connection. Make sure a video cable is not connected to an audio input port. Check the signal strength after connecting a cable. Low signal level can cause corrupted sound. There is audible sound when the volume is When Speaker Select...
Page 273 Troubleshooting Guide Other issue The product smells like plastic. The plastic smell is normal and disappears over time. The monitor appears tilted. Remove and then attach the stand again to the product. Audio or video cuts out intermittently. Check the cable connection and connect it again if required.
Page 274 Troubleshooting Guide Other issue There is no sound in HDMI mode. Displayed picture colours may not look normal. Video or sound may not be available. This can occur if a source device that only supports an older version of the HDMI standard is connected to the product.
Page 275 Troubleshooting Guide Other issue In power-saving mode, when the input source Go to System General and set Max power DP,PC display settings cannot be saved. saving to off. Alternatively, configure the display output settings again. Ensure the set is turned on. When booting the with the input source set Boot the...
Page 276 Troubleshooting Guide 13.2 Q & A Question Answer How can I change the Set the frequency on your graphics card. frequency? Windows XP: Go to Control Panel Appearance and  Themes Display Settings Advanced Monitor and adjust the frequency in Monitor settings. Windows ME/2000: Go to Control Panel Display ...
Page 277 Troubleshooting Guide Question Answer How can I change the Windows XP: Go to Control Panel Appearance and  resolution? Themes Display Settings and adjust the resolution. Windows ME/2000: Go to Control Panel Display  Settings and adjust the resolution. Windows Vista: Go to Control Panel Appearance and ...
Page 278 49.2 x 28.4 x 1.4 inches Weight 16.9 kg / 37.3 Ibs 21.15 kg / 46.6 Ibs VESA 400 x 400 mm / 15.7 x 15.7 inches Model Name PE40C / PE46C / PE55C Display colour 16.7M Synchronization Horizontal 30~81kHz Vertical...
Page 279 This device is a Class A digital apparatus. (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877) 278 - 0799 14 Specifications Great user manuals database on UserManuals.info...
Page 280 Power Rating State saving Power off (Power Rating Typical (With mode Button) PIM) Power Indicator Blinking PE40C 220 W 150 W 120 W Power Consumpt PE46C 260 W 190 W 140 W 0.5 W 0.5 W PE55C 290 W 220 W...
Page 281 Specifications 14.3 Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture  quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality.
Page 282 Specifications Sync Horizontal Vertical Pixel Clock Polarity Display Mode Frequency Frequency (MHz) (kHz) (Hz) (H/V) VESA, 1366 x 768 47.712 59.790 85.500 VESA, 1440 x 900 55.935 59.887 106.500 VESA, 1600 x 900(RB) 60.000 60.000 108.000 VESA, 1680 x 1050 65.290 59.954 146.250...
Page 283 Specifications 14.4 Licence Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under a licence from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, Ⓡ 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks &...
Page 284 Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care cent re . NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com...
Page 285 0810 - SAMSUNG http://www.samsung.com (7267864, € 0.07/min) BELGIUM 02-201-24-18 http://www.samsung.com/be (Dutch) http://www.samsung.com/be_fr (French) BOSNIA 051 133 1999 http://www.samsung.com BULGARIA 07001 33 11 , normal tariff http://www.samsung.com CROATIA 062 SAMSUNG (062 726 786) http://www.samsung.com Appendix Great user manuals database on UserManuals.info...
Page 286 800 - SAMSUNG (800-726786) http://www.samsung.com Samsung Electronics Czech and Slovak, s.r.o., Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8 till 8.2.2013 . From 8.2.2013: Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 - Praha 4 DENMARK 70 70 19 70 http://www.samsung.com...
Page 287 +381 11 321 6899 http://www.samsung.com (old number still active 0700 7267864) SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www.samsung.com SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848-SAMSUNG http://www.samsung.com/ch (7267864, CHF 0.08/min) (German) http://www.samsung.com/ch_fr...
Page 288 1800 266 8282 INDONESIA 0800-112-8888 http://www.samsung.com/id 021-5699-7777 JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com/my NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com PHILIPPINES 1-800-10-SAMSUNG (726-7864) http://www.samsung.com/ph for PLDT 1-800-3-SAMSUNG (726-7864) for Digitel 1-800-8-SAMSUNG (726-7864) for Globe 02-5805777 SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com...
Page 289 Appendix MENA KUWAIT 183-2255 (183-CALL) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) MOROCCO 080 100 2255 http://www.samsung.com OMAN 800-SAMSUNG (726-7864) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) QATAR 800-2255 (800-CALL) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) SAUDI ARABIA 9200-21230 http://www.samsung.com/sa (Arabic) SYRIA 18252273 http://www.samsung.com/Levant (English) TURKEY 444 77 11 http://www.samsung.com...
Page 290  use of supplies or separately sold product unspecified by Samsung.  repair from a person besides an engineer of outsourcing service company or partner of Samsung  Electronics Co., Ltd. remodeling or repairing the product by customer.
Page 291 Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may  be brighter or darker on the LED panel. This does not affect product performance. The number of sub-pixels by LED panel type: PE40C, PE46C, PE55C: 6,220,800  "Auto Adjustment"...
Page 292 Appendix Prevention of Afterimage Burn-in What is afterimage burn-in? Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period of time (more than 12 hours), a slight voltage difference may occur between the electrodes in pixels that control the liquid crystals.
Page 293 Appendix Regular colour Change  Type 1 Type 2 FLIGHT TIME FLIGHT TIME OZ348 20:30 OZ348 20:30 UA102 21:10 UA102 21:10 Use 2 colours Switch between 2 colours every 30 minutes as shown above. Avoid combinations of a text colour and background colour of contrasting brightness. ...
Page 294 Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Page 295 Appendix Terminology Dot Pitch The product and screen consist of red, green and blue dots. A shorter distance between the dots produces a higher resolution. Dot pitch refers to the distance between the shortest distance between dots of the same colour. Dot pitch is measured in millimeters. Vertical Frequency The product displays a single image many times per second (like a fluorescent light that flickers) to display an image for a viewer to see.
Page 296 Appendix Multiple Display Control (MDC) MDC (Multiple Display Control) is an application that allows multiple display devices to be controlled simultaneously using a PC. Communication between a PC and monitor takes place using RS232C (serial data transmission) and RJ45 (LAN) cables. DVD (Digital Versatile Disc) DVD refers to a CD-sized mass storage disk where you can save multimedia (audio, video or game) applications using MPEG-2 video compression technology.
Page 297 Index Port Problem report Batteries Remote Control Contact SAMSUNG WORLD WIDE Reset All Content Manager 214, Responsibility for the Pay Service (Cost to Contents Home Customers) Correct Disposal Custom settings screen Screen Adjustment Screen Position Edit Name Settings 216, 256,...
Page 298 Index WPS(PBC) Index...

This manual is also suitable for:

Pe46c Pe55c

Samsung PE40C User Manual

Quick Links

Related Manuals for Samsung PE40C

Summary of Contents for Samsung PE40C

This manual is also suitable for:

Table of Contents