Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Samsung IPX-G5X0 series
Summary of Contents for Samsung IPX-G5X0 series
- Page 1 SAMSUNG IPX-G5X0 Installation Manual v1.0 Mar 2016...
-
Page 2: Publication Information
COPYRIGHT ©2010~2016 SAMSUNG Electronics Co., Ltd. All rights reserved. This manual is proprietary to SAMSUNG Electronics Co., Ltd. and is protected by copyright. No information contained herein may be copied, translated, transcribed or duplicated for any commercial purposes or disclosed to a third party in any form without the prior written consent of SAMSUNG Electronics Co., Ltd. -
Page 3: Console Screen Output
SAMSUNG IPX-G5X0 Installation Manual v1.0 Mar 2016 Conventions The following types of paragraphs contain special information that must be carefully read and thoroughly understood. Such information may or may not be enclosed in a rectangular box, separating it from the main text, but is always preceded by an icon and/or a bold title. - Page 4 SAMSUNG IPX-G5X0 Installation Manual v1.0 Mar 2016 Table of Contents...
-
Page 5: Hardware Specifications
SAMSUNG IPX-G5X0 Installation Manual v1.0 Mar 2016 IPX-G5X0 Series Specifications Hardware Specifications Size Size (W x D x H): 441.5 × 352 × 44mm 19” Rack Installation: 1U Power AC 110/220V ICMUt, DC +12 V/5.5 A Output 2 Gigabit Ethernet ports / 1 USB port / 1 Console port... - Page 6 Mar 2016 IPX-G5X0 Series Installation The IPX-G5X0 series gateways provide interfaces to a number of protocols such as PRI, FXS and FXO. It interfaces with the Samsung Communication Manager (SCM) by SIP protocol and can be extended to remote locations as a survivable gateway.
- Page 7 SAMSUNG IPX-G5X0 Installation Manual v1.0 Mar 2016 SCM Configuration Preparation The following hardware is provided with your IPX-G5X0 Server: AC Power Cord RJ45 to DB9 Serial Cable Gateway Link Setting Begin by creating a new gateway link in the SCM Administrator at: [Configuration>...
-
Page 8: Gateway Configuration
Enter the Profile Login ID, which should be the same as the Gateway Name. Then enter the Profile Login Passcode (samsung*# by default). You don’t need to enter any IP addresses here. These fields are not needed for this implementation. -
Page 9: Network Configuration
If you selected to Use WAN, enter WAN IP Address and WAN Subnet Mask. The IPX-G5X0 Series has an internal DHCP server. If you want to connect another devices, for example IP phones, to the LAN and want to receive IP addresses automatically, set the DHCP IP Address Range –... - Page 10 SAMSUNG IPX-G5X0 Installation Manual v1.0 Mar 2016 Analog FXS Phone Users Create an Analog FXS Phone User that will be assigned to the gateway in the SCM at: [Configuration – User – Single Phone User] If you already have existing FXS phone users, you may also use those.
-
Page 11: Basic Configuration
SAMSUNG IPX-G5X0 Installation Manual v1.0 Mar 2016 Create a Gateway Route This table creates the SIP connection between the SCM and the Gateway for Signaling, Media and security of the communication. Create the route information for the new gateway in the SCM at [Configuration> Trunk Routing>... - Page 12 SAMSUNG IPX-G5X0 Installation Manual v1.0 Mar 2016 FXO/SIP/PRI Trunk Routing Create the appropriate route information for your FXO/SIP/PRI trunks attached to the gateway in the SCM at: [Configuration – Trunk Routing - Route] Basic Configuration Set the Register Type to ‘Receive REGISTER’, and enter port 5060.
-
Page 13: Analog Trunk
SIP Trunks are configured in the SCM Administrator at: [Configuration – Gateway – IPX Setting – Gateway SIP Trunk] The IPX-G5X0 Series supports up to 4 SIP carriers. Note: SIP Servers must be entered as IP addresses. Domain Names are not supported at this time. -
Page 14: Pri Trunk
SAMSUNG IPX-G5X0 Installation Manual v1.0 Mar 2016 PRI Trunk To use a 1PRI/2PRI card you have to configure it in the SCM Administrator at: [Configuration – Gateway – IPX Setting – Gateway PRI Trunk] Select the Gateway to edit and press the Change button. - Page 15 Mar 2016 IPX-G5X0 Series Configuration After SCM Configuration is completed begin the configuration of the IPX-G5X0 series gateway. For the IPX-G500B (Base cabinet) you will have to set the IP Address of the base cabinet, the IP Address of the SCM, and the Gateway Name.
- Page 16 SAMSUNG IPX-G5X0 Installation Manual v1.0 Mar 2016 IPX-G500B Basic Configuration Once connected via serial to the IPX-G500B, you can enter your network information into the gateway. There are options to setup the gateway in a LAN or NAT configuration (see examples in the following pages).
- Page 17 SAMSUNG IPX-G5X0 Installation Manual v1.0 Mar 2016 Example of [NAT] ###### Please enter network mode of this GW ###### 1. Enter Networkmode [0:LAN / 1:NAT] (Enter Key : NAT) : ###### Please enter [WAN IP/Gateway/Subnet Mask] of this GW ###### 1.
- Page 18 SAMSUNG IPX-G5X0 Installation Manual v1.0 Mar 2016 Example of [LAN] ###### Please enter network mode of this GW ###### 1. Enter Networkmode [0:LAN / 1:NAT] (Enter Key : NAT) : 0 ###### Please enter [LAN IP/Gateway/Subnet Mask] of this GW ###### 1.
- Page 19 Run a serial terminal program (I.E., PuTTY, etc.) on your PC and set the baud rate to 38,400. The default login ID is: admin / The default Password is: samsung*# Enter ‘cli’ to set up the basic gateway configuration.
-
Page 20: Update Software
Mar 2016 Update Software Update via SCM Administrator You can upload and update the IPX-G5X0 series software using the GUI of the SCM Administrator. File Upload Before updating the gateway software you have to upload the software to the SCM. - Page 21 SAMSUNG IPX-G5X0 Installation Manual v1.0 Mar 2016 Upgrade Configuration After uploading the file to the SCM, set the upgrade configuration at: [Configuration – Gateway – IPX Setting – Gateway Upgrade Configuration] Enter the Gateway Version to update, the Transfer Protocol (tftp or ftp), Port, Login ID, and Password.
- Page 22 SAMSUNG IPX-G5X0 Installation Manual v1.0 Mar 2016 Package Upgrade You can see the current software/hardware version at: [Configuration> Gateway> IPX Setting> Gateway Package Upgrade] Select the target to update software and press the Change button. Then check the target to update software and press the Upgrade or Apply button.
-
Page 23: Manual Update
Connect the serial cable to Console Port 1 of the IPX-G500B (Baud Rate: 38,400) Enter ID and Password to log on. Default ID: admin / Default Password: samsung*# Change the directory on your FTP Server where the software can be downloaded. - Page 24 Connect the serial cable to the Console Port 2 of the IPX-G500B. (Baud Rate: 38,400) Enter ID and Password to log on. Default ID: admin / Default Password: samsung*# Change the directory on your FTP Server where the software can be downloaded.
-
Page 25: Factory Reset
Connect the serial cable to the console port of the gateway to initialize. (Baud Rate: 38,400) Enter ID and Password to log on. Default ID: admin / Default Password: samsung*# Enter ‘cli’ to set up the basic gateway configuration. - Page 26 SAMSUNG IPX-G5X0 Installation Manual v1.0 Mar 2016 PRI & FXS Basic Function Checklist The following is a quick guide to testing your PRI functionality after your gateway is installed and configured. 1) Prepare 2 Analog Phones and FXS / PRI cards.
- Page 27 SAMSUNG IPX-G5X0 Installation Manual v1.0 Mar 2016 ©2010~2016 Samsung Electronics Co., Ltd. All rights reserved. Information in this manual is proprietary to SAMSUNG Electronics Co., Ltd. No information contained here may be copied, translated, transcribed or duplicated by any form without the prior written consent of SAMSUNG.