hit counter code
Makita DGD800 Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Grinder
  5. DGD800
  6. Instruction manual

Makita DGD800 Instruction Manual

Cordless die grinder
Hide thumbs Also See for DGD800:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual
INSTRUCTION MANUAL
Cordless Die Grinder
DGD800
DGD801
011465
IMPORTANT: Read Before Using.
1

Advertisement

Table of Contents
loading

Related Manuals for Makita DGD800

Summary of Contents for Makita DGD800

  • Page 1 INSTRUCTION MANUAL Cordless Die Grinder DGD800 DGD801 011465 IMPORTANT: Read Before Using.

  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model DGD800 DGD801 Collet capacity 1/4", 6 mm and / or 8 mm Max. wheel point diameter 36 mm Max. mandrel (shank) length 46 mm No load speed (n ) / Rated speed (n) 26,000 (min...
  • Page 3 Do not abuse the cord. Never use the cord for 19. Disconnect the plug from the power source carrying, pulling or unplugging the power tool. and/or the battery pack from the power tool Keep cord away from heat, oil, sharp edges or before making any adjustments, changing moving parts.
  • Page 4 GEB124-1 protectors, gloves workshop apron capable stopping small abrasive CORDLESS DIE GRINDER workpiece fragments. The eye protection must SAFETY WARNINGS be capable of stopping flying debris generated by various operations . The dust mask or respirator Safety Warnings Common for Grinding Operation: must be capable of filtrating particles generated This power tool is intended to function as a grinder.
  • Page 5 Kickback and Related Warnings 25. Do not leave the tool running. Operate the tool Kickback is a sudden reaction to a pinched or snagged only when hand-held. rotating accessory. Pinching or snagging causes rapid 26. Do not touch the workpiece immediately after stalling of the rotating accessory which in turn causes operation;...

  • Page 6: Functional Description

    If you can see the red indicator on the causing fires, personal injury and damage. It will also upper side of the button, it is not locked completely. void the Makita warranty for the Makita tool and charger. Tips for maintaining maximum battery life CAUTION:...
  • Page 7 Battery protection system Indicator lamps The tool is equipped with a battery protection system. Remaining This system automatically cuts off power to the motor to capacity extend battery life. Lighted Blinking The tool will automatically stop during operation if the 75% to 100% tool and/or battery are placed under one of the following conditions:...

  • Page 8: Operation

    Indication lamp with multi function Installing or removing wheel point 1. Wrench 13 1. Indication lamp 2. Wheel point 3. Collet nut 4. Wrench 13 011468 011472 Loosen the collet nut and insert the wheel point into the Indication lamps are located in two positions. collet nut.

  • Page 9: Maintenance

    Replacing carbon brushes If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. 1. Limit mark Side handle (accessory) 001145 Remove and check the carbon brushes regularly. Replace when they wear down to the limit mark.
  • Page 10 Collet nut • Wrench 13 • Side handle set • Makita genuine battery and charger • NOTE: Some items in the list may be included in the tool • package as standard accessories. They may differ from country to country.
  • Page 12 Makita Corporation www.makita.com 885292B0...

This manual is also suitable for:

Dgd801

Table of Contents