Table of Contents
Advertisement
Remote Control Operation
You can use the air conditioner easily by selecting a mode and then by controlling the temperature, fan speed,
and air direction.
Operation modes
You can change the current mode between Auto, Cool, Dry, Fan, and
Heat by pressing the
Controlling temperature
You can control the temperature in each mode as follows:
Mode
Auto/Cool/
Adjust by 1 °C between 16 °C and 30 °C.
Heat
Dry
Adjust by 1 °C between 18 °C and 30 °C.
Fan
You cannot control the temperature.
You can switch between Celsius and Fahrenheit indications on the
remote control.
▶
Press and hold for 3 or more seconds
NOTE
• The temperature indications on the indoor unit are not switched.
• This function is canceled when the remote control batteries are
replaced. In this case, run this function again.
You can use the Cool, Dry, and Heat modes in the following conditions:
Mode
Indoor
16 °C to 32 °C
temperature
Outdoor
-10 °C to 46 °C
temperature
80% or less
Indoor humidity
relative
humidity
• If the air conditioner operates in a high humidity environment in the
Cool mode for an extended period of time, condensation may occur.
• If the outdoor temperature drops to -15°C, the heating capacity may
decrease to as much as 60% to 70% of the specified capacity.
• For more information about outdoor temperature in the muti
system, refer to the manual for the muti system.
button.
Temperature control
Cool
Dry
18 °C to 32 °C
-10 °C to 46 °C
_
Heat
27 °C or less
-15 °C to 24 °C
_
English
15
Advertisement
Table of Contents
