hit counter code
Samsung OfficeServ 7200 Technical Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Telephone System
  5. OfficeServ 7200
  6. Technical manual

Samsung OfficeServ 7200 Technical Manual

Hide thumbs Also See for OfficeServ 7200:
Table of Contents

Advertisement

Quick Links

Download this manual
OfficeServ 7200
TECHNICAL MANUAL
T A B L E
I N S TA L L AT I O N S E C T I O N
PART
DESCRIPTION
1
1.1
1.2
1.3
1.4
2
2.1
2.2
2.3
2.4
2.5
3
3.1
3.2
3.3
3.4
4
4.1
5
CONNECTING TELCO CIRCUITS
5.1
5.2
6
CONNECTING STATION EQUIPMENT
6.1
6.2
O F
SITE REQUIREMENTS ............................................................... 1.1
GROUNDING CONDITIONS ....................................................... 1.2
POWER CONDITIONS ................................................................ 1.4
UNPACKING AND INSPECTION ................................................ 1.4
SYSTEM INSTALLATION PROCEDURE ..................................... 2.1
SELECTING INSTALLATION METHOD ...................................... 2.1
INSTALLING IN A RACK ............................................................. 2.1
INSTALLING ON A WALL ........................................................... 2.4
CONNECTING GROUND WIRES ............................................... 2.8
CABINET CONFIGURATION....................................................... 3.1
MCP AND LCP MODULES .......................................................... 3.2
INTERFACE BOARDS ............................................................... 3.10
CONNECTING POWER FAIL TRANSFER................................. 3.39
CONNECTING EXTERNAL BATTERIES ..................................... 4.1
BEFORE CONNECTING POWER ............................................... 5.1
PROCEDURE FOR CONNECTING POWER ............................... 5.1
SAFETY PRECAUTIONS ............................................................. 6.1
CONNECTING C.O. LINES ......................................................... 6.1
Home Page
TABLE OF CONTENTS SEPTEMBER 2005
C O N T E N T S

Table of Contents

INSTALLATION
PAGE

Advertisement

Table of Contents
loading

Related Manuals for Samsung OfficeServ 7200

Summary of Contents for Samsung OfficeServ 7200

  • Page 1: Table Of Contents

    Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL TABLE OF CONTENTS SEPTEMBER 2005 T A B L E C O N T E N T S I N S TA L L AT I O N S E C T I O N...
  • Page 2 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL TABLE OF CONTENTS SEPTEMBER 2005 CONNECTING STATIONS AND ADDITIONAL EQUIPMENT CONNECTING STATIONS ............7.1 CONNECTING ADDITIONAL EQUIPMENT ......7.23 POWER UP PROCEDURES PRE-CHECK ................8.1 STARTING THE SYSTEM............8.1 CHECKING THE FAN ..............8.2 NUMBERING EXTENSIONS AND C.O.
  • Page 3 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL TABLE OF CONTENTS SEPTEMBER 2005 FIGURE 3.2: Switch Setting FIGURE 3.3: Installing the Processor Board (1) FIGURE 3.4: Installing the Processor Board (2) FIGURE 3.5: Link Cables FIGURE 3.6: Connecting MCP Board to LCP Board FIGURE 3.7: Front View of the MCP...
  • Page 4 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL TABLE OF CONTENTS SEPTEMBER 2005 FIGURE 3.32: Front View of the 4DSL Board FIGURE 3.33: Ports (P1~P4) Wiring Pinout FIGURE 3.34: SVMi-20E LED Indications FIGURE 3.35: SVMi-20E/HD and SVMi-20E/CF FIGURE 3.36: Power Fail Transfer Connection to 16MWSLI/16SLI2/8SLI FIGURE 4.1: Connecting an External Battery (1)
  • Page 5 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL TABLE OF CONTENTS SEPTEMBER 2005 FIGURE 7.19: Connecting a Single Line Telephone to a KDB-SLI FIGURE 7.20: Connecting a Station Device to a KDB via MDF FIGURE 7.21: Wall-Mounting a Keyset FIGURE 7.22: Ultra Base Wedge...
  • Page 6 TABLE 3.15: Ports and LEDs of the MGI TABLE 3.16: Ports and LEDs of the 4WLI TABLE 3.17: Ports and LEDs of the 4DSL TABLE 6.1: OfficeServ 7200 Line Conditions TABLE 7.1: Distance Between Stations and the System TABLE 7.2: Specification for Wireless LAN Connection TABLE 7.3: Wiring Between 4WLI and WBS24...

  • Page 7: Pre-Installation Information

    • Do not install in close proximity to a fire sprinkler or other sources of water. • A dedicated commercial AC power outlet is required. Do not use extension cords. • Ensure that all wires and cables to and from the OfficeServ 7200 do not cross fluorescent lights or run in parallel with AC wires.

  • Page 8: Grounding Conditions

    The OfficeServ 7200 system requires that a supplementary earth ground be connected to the system. This is the preferred method of grounding the OfficeServ 7200. It should be noted that when the third wire ground becomes inferior it many prevent the digital data bus from canceling out noise.
  • Page 9 Obviously, it is important to have a good source of ground connected to the OfficeServ 7200 system to drain this energy off. Again, a good earth ground source is required by the OfficeServ 7200 system.

  • Page 10: Power Conditions

    PART 1 SEPTEMBER 2005 1.3 POWER CONDITIONS The power supply board of the OfficeServ 7200 system receives AC input power or battery power, and supplies -48 V, -5 V, +5 V, +3.3 V, +12 V, and -56 V to the system cabinet.

  • Page 11: Installing Cabinets

    2.1 SYSTEM INSTALLATION PROCEDURE The procedure of system installation is as follows. 1) Install the OfficeServ 7200 cabinet on a table, inside a data rack or on the wall depending on the installation environment. 2) Connect the ground to the ground lug behind the main cabinet.

  • Page 12: Figure 2.1 Tools Required For Rack Installation

    Figure 2.1 Tools Required for Rack Installation 2.3.3 Installing in a Rack The procedure for installing the OfficeServ 7200 cabinet inside a 19-inch rack is as follows: 1) Attach the cabinet bracket to the bottom surface of the OfficeServ 7200 cabinet and fasten the bracket firmly with the three screws.

  • Page 13: Figure 2.3 Rack Installation

    Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 2 SEPTEMBER 2005 2) Attach the rack brackets to both sides of the rack and fasten the brackets firmly with the six screws. Figure 2.3 Rack Installation (2) 3) Align the cabinet to the guardrails of the rack and slide the cabinet into the rack.

  • Page 14: Installing On A Wall

    5) The above steps 1~4 also apply to expansion cabinets. 2.4 INSTALLING ON A WALL This section describes how to install the OfficeServ 7200 cabinet on a wall. The optional OfficeServ 7200 wall mount bracket is required (must be ordered separately).

  • Page 15: Figure 2.6 Tools Required For Wall Installation

    INSTALLATION TECHNICAL MANUAL PART 2 SEPTEMBER 2005 • Two screws that are already screwed in the bottom of the OfficeServ 7200 cabinet. Figure 2.6 Tools Required for Wall Installation 2.4.2 Wall Installation The procedure for installing the OfficeServ 7200 cabinet on a wall by using a wall...

  • Page 16: Figure 2.8 Wall Installation

    4) Secure the bracket to the wall using appropriate hardware. Figure 2.9 Wall Installation (3) 5) There are two screws in two of the four holes at the bottom of OfficeServ 7200 cabinet as shown below. To install on the wall, loosen the two screws to approximately 2mm as shown in figure 2.10.

  • Page 17: Figure 2.11 Wall Installation

    2 mm space. Figure 2.11 Wall Installation (5) 7) Hang the screws on the bottom surface of the OfficeServ 7200 cabinet to the holes of wall bracket and push the cabinet downward to fix the cabinet. Figure 2.12 Wall Installation (6)

  • Page 18: Connecting Ground Wires

    As shown in the figure below, connect an earth ground to the ground lug behind the OfficeServ 7200. For an expansion cabinet, connect and ground the external ground wire between the expansion cabinet and the main cabinet.

  • Page 19: Installing And Replacing Boards

    PART 3 SEPTEMBER 2005 PART 3. INSTALLING AND REPLACING BOARDS This section describes how to install and replace various boards of the OfficeServ 7200 system. 3.1 CABINET CONFIGURATION The main and expansion cabinets of the OfficeServ 7200 system have six slots each.

  • Page 20: Mcp And Lcp Modules

    MCP and LCP boards. The OfficeServ 7200 MCP (Main Control Processor) controls the system operation. The MCP is required for all configurations and goes in slot 0 of the main cabinet. The LCP...
  • Page 21 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 3 SEPTEMBER 2005 The LCP is a secondary processor that communicates with the MCP and manages the boards in the expansion cabinet. 3.2.1 Setting Switches The MCP board includes switches used for optimizing the board to the user requirements and system configuration.

  • Page 22: Table 3.3 Types Of Control Boards

    Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 3 SEPTEMBER 2005 DIP SWITCH USE (S3) ON (left) OFF (right) 4 DIGIT STATION NUMBERS 3 DIGIT STATION NUMBERS 4 DIGIT STATION GROUPS 3 DIGIT STATION GROUPS 4 DIGIT TRUNK NUMBERS...
  • Page 23 1) Check the exterior of the MCP board and the LCP board for any damage. If damage is found, do not proceed with installation. Contact Samsung Technical Support. Power the system OFF when installing or removing boards. POWER TO THE CABINET MUST BE TURNED OFF. Failure to do so will damage the card, cabinet and/or corrupt the data moving along the data bus.
  • Page 24 PART 3 SEPTEMBER 2005 3.2.3 Connecting MCP Board to LCP Board If the OfficeServ 7200 system consists of a Main Cabinet and an Extension Cabinet, connect the MCP board to the LCP board using link cables to transmit and receive signals between the control boards.

  • Page 25: Table 3.4 Ports And Leds Of The Mcp Board

    Port for installing the 32MB Smart Media card. This card contains the main system software. Port for establishing the 10 Base-T/100 Base-Tx Ethernet connection. Serial port (Samsung Engineering Use ONLY). Button for resetting the MCP board. RUN LED This LED indicates the status of the MCP .

  • Page 26: Table 3.5 Ports And Leds Of The Lcp

    Ports & LEDs Function LINK1~LINK3 Ports that connect the MCP with the LCP . Serial port (for Samsung Engineering Use ONLY) Button for resetting the LCP board. RUN LED This LED indicates the status of the LCP . - Off: Power is not connected.
  • Page 27 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 3 SEPTEMBER 2005 3.2.6 Optional Daughter Boards There are 4 types of optional daughter boards that can be installed ONLY on the MCP. Each optional daughterboard must be installed in specific positions of the MCP...

  • Page 28: Interface Boards

    Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 3 SEPTEMBER 2005 RCM or RCM2 Figure 3.9 Installing Optional Boards 3.3 INTERFACE BOARDS This section describes how to set jumpers and switches of an interface board, how to install optional daughter boards to an interface board, and how to install interface boards into slots.
  • Page 29 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 3 SEPTEMBER 2005 Category Interface Board Applicable Slot VoIP , Wireless Slot 2 through slot 5 of the main cabinet* and Data Slot 2 through slot 5 of the expansion...
  • Page 30 Figure 3.11 Front Panel Lever 3.3.2 Replacing Boards If the OfficeServ 7200 system fails to operate normally due to an error on the power supply board, control board, or interface board, replace the board with a new one. Removing Cables Replace a board after removing all cables connected to the board.
  • Page 31 4) Align the new board to the guardrails of the slot, and slide the new board into the slot. Push the front panel lever of the MCP board until it is completely inserted into the OfficeServ 7200 main board port. Figure 3.15 Replacing to New Board...
  • Page 32 (Sync, AIS, Loss and Layer 2 Active states). The second four LED’s on the front of the card display the type of service. The first TEPRI card installed in the OfficeServ 7200 is the primary source of external clocking. The second TEPRI installed is the secondary source of external clocking.
  • Page 33 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 3 SEPTEMBER 2005 See the S1 switch and jumpers of the TERRI board as shown below. Figure 3.16 Setting switches on the TEPRI Board JUMPER SETTING The TEPRI board comes from the factory with the following jumper settings. These settings should NOT be changed.

  • Page 34: Table 3.7 Ports And Leds Of The Tepri

    Table 3.7 Ports and LEDs of the TEPRI Ports & LEDs Function Description T1/E1/PRI Ports that connect the T1/E1/PRI cable. Serial port (for Samsung Use ONLY) Button for resetting the TEPRI board. SYNC LED Clock synchronization. - On: Indicates loss of framing (Error Condition).
  • Page 35 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 3 SEPTEMBER 2005 Ports & LEDs Function Description IPC LED This LED indicates that this board is inter-working with the higher-level module. - On: The board is inter-working with the MCP/LCP .

  • Page 36: Table 3.8 Ports And Leds Of The 8Trk

    Table 3.9 Ports of the 16SLI2 Ports Function Description P1~P16 Samsung Digital Telephone Extension Port NOTE: A station using KDB-D or KDB-S cannot connect to a port on this board. Refer to Section 7.1.3 (Connecting a Digital Phone) for port Pinout and Wiring. 3.18...

  • Page 37: Table 3.10 Ports And Leds Of The 8Dli Board

    TECHNICAL MANUAL PART 3 SEPTEMBER 2005 3.3.6 8DLI BOARD This board provides 8 ports for connecting Samsung Digital Keysets. This board can go into slots 1~5 of either cabinet. Add as many as needed. SPECIFICATIONS The specifications of the 8DLI/16DLI board are as follows: •...
  • Page 38 3.3.7 8COMBO This board provides 8 ports for connecting analog stations and 8 ports for connecting Samsung Digital Keysets. This board can go into slots 1 through 5 in either cabinet. Add as many as needed. FRONT VIEW OF 8COMBO BOARD The front view of the 8COMBO board is shown in the picture below.
  • Page 39 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 3 SEPTEMBER 2005 FRONT VIEW OF 16SLI2/16MWSLI BOARD The front view of the 16SLI2/16MWSLI board is shown in the picture below. Figure 3.22 Front View of the 16SLI2 Front panel components of the 16SLI2: Table 3.11 16SLI2 Board Ports...
  • Page 40 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 3 SEPTEMBER 2005 3.3.9 8SLI This board provides 8 ports for connecting analog stations. It can go into slots 1 through 5 of either the main or the expansion cabinet. Add as many as needed. This card automatically detects DTMF or dial pulse signals from SLT.
  • Page 41 PART 3 SEPTEMBER 2005 3.3.10 WIM (WAN INTERFACE MODULE) This board provides data router functionality to the OfficeServ 7200. It offers a variety of interfaces for connecting to external and internal data networks. A WIM board can be installed in either slot 1 of the main cabinet or slot 1 of the expansion cabinet.
  • Page 42 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 3 SEPTEMBER 2005 The components on the front panel of the WIM have the functions below. Table 3.13 Ports and LEDs of the WIM Ports & LEDs Function Description Internal port that bypasses firewall (de-militarized zone) Ethernet port connected with the internal private network.
  • Page 43 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 3 SEPTEMBER 2005 CSU/PSU Serial (WAN) ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ ________ Figure 3.26 V.35 Cable Pin Outs. This cable connects from the “Serial” connector or the WAN card to the customer provided CSU/DSU.
  • Page 44 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 3 SEPTEMBER 2005 Figure 3.27 SIO Connector, RJ45 Pin Assignment 3.3.11 LIM (LAN INTERFACE MODULE) The LIM board sends/receives data from the internal LAN, and provides an interface of 10/100 BASE-T.
  • Page 45 OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 3 SEPTEMBER 2005 Refer to the OfficeServ 7200 Data Server Manual for detailed LIM installation and configuration information. SPECIFICATIONS The LIM data board provides 16 ports of 10/100 BASE-T. FRONT VIEW OF LIM BOARD The front view of the LIM data module is shown in the picture below.
  • Page 46 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 3 SEPTEMBER 2005 3.3.12 MGI (MEDIA GATEWAY INTERFACE) The MGI board provides a variety of Voice over IP (VoIP) services for the OfficeServ 7200. This card is required for ITP phones, IP networking, IP trunking or any application that require VoIP.
  • Page 47 Table 3.15 Ports and LEDs of the MGI Ports & LEDs Function Description Port that connects the Ethernet. Serial Port (for Samsung Use ONLY) Button for resetting the MGI. PWR LED This LED indicates the power supply status. - Off: Power is not being supplied.
  • Page 48 3.3.13 4WLI The 4WLI (Wireless LAN Interface) provides connectivity for wireless points to the OfficeServ 7200 system. A maximum of 3 4WLI boards can be installed per system. This board can go in slots 1 through 5 of either cabinet.
  • Page 49 This board extends the Ethernet data connectivity to a remote location up to 1 km away over standard telephone wire pairs (P1~P4). The remote location must have Samsung VDSL modem (SVM-39A-LX) to terminate the line coming from the 4DSL board (P1~P4).
  • Page 50 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 3 SEPTEMBER 2005 The components on the front panel of the 4DSL have the functions below: Table 3.17 Ports and LEDs of the 4DSL Ports & LEDs Function Description P1~P4 Ports that connect the VDSL.
  • Page 51 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 3 SEPTEMBER 2005 3.3.15 SVMi-20E The SVMi-20E card can be installed in the OfficeServ 7000 Series Systems. This section provides the additional steps required to set up the SVMi-20E for operation in the OfficeServ 7000 Series Systems.
  • Page 52 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 3 SEPTEMBER 2005 • VM1 Status LED: This indicates that one or more of the embedded ports (port 1 thru 4) are off hook. • VM2 Status LED: This indicates that one or more of the ports on the 1st installed VPM are off hook.
  • Page 53 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 3 SEPTEMBER 2005 Figure 3.35 SVMi-20E/HD with no optional boards installed (LEFT) and SVMi-20E/CF with all components installed (RIGHT) INSERTING THE CARD NOTE: Before powering off the KSU, it is recommended that you use MMC 740 and set MBX Download to 'No'.
  • Page 54 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 3 SEPTEMBER 2005 POWER UP PROCEDURE FOR SVMi-20E Follow the steps below to ensure that the SVMi-20E is properly setup. POWER UP 1. Complete insertion of the SVMi-20E and all other required interface cards and turn the system power switch ON.
  • Page 55 SVMi-20E hardware. You are now ready to begin programming the SVMi-20E Voice Mail/Auto Attendant system parameters. See the SAMSUNG SVMi-20E Programming Manual. NOTE: See MMC references in the SVMi-20E Programming Overview documentation for other MMCs that interact with the SVMi-20E.
  • Page 56 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 3 SEPTEMBER 2005 CORRECT SYSTEM SHUTDOWN Whenever possible one of the following procedures should be followed when shutting down the SVMi-20E system and/or prior to shutting down the Telephone equipment.

  • Page 57: Connecting Power Fail Transfer

    1 on the 8SLI, 16SLI2, or 16MWSLI cards. In case the OfficeServ 7200 loses power from its AC source, and no battery backup is available, this feature is automatically activated. The SLT connected to Port 1 of the SLI will get C.O.

  • Page 58: Connecting External Batteries

    OfficeServ 7200 to emergency backup batteries. The OfficeServ 7200 can also run without AC power on a -48VDC battery system or rectifier. There should be no more than a 0.5VDC drop in voltage from the OfficeServ 7200 and the batteries.
  • Page 59 The procedure for using a battery cable to connect an external battery to the OfficeServ 7200 system is as follows: 1) Prepare the battery cable that was provided with the OfficeServ 7200 system. An end of this battery cable consists of a white wire and a black wire.
  • Page 60 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 4 SEPTEMBER 2005 Figure 4.2 Connecting an External Battery (2)

  • Page 61: Before Connecting Power

    5.2 PROCEDURE FOR CONNECTING POWER SINGLE CABINET CONFIGURATION Use the power cable provided with the OfficeServ 7200 system to connect the input power terminal on the rear panel of the cabinet to a grounded outlet. Figure 5.1 Connecting Power (for Single Cabinet)
  • Page 62 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 5 SEPTEMBER 2005 MAIN AND EXPANSION CABINET CONFIGURATION The connection procedure depends on the environment of the installation area as shown below. Select a procedure according to your environment.

  • Page 63: Safety Precautions

    6.2.1 Connecting Common C.O. Lines Use a twisted pair of wires with AWG #24(or AWG #26) width to connect a common C.O. line to the terminal pin of a terminal box connected to the OfficeServ 7200 system equipped with an 8TRK board.
  • Page 64 CSU end only to prevent a ground loop. ORDERING A T1 The following information may be useful when ordering T1 service from the telephone company. PARAMETER OPTIONS IN OFFICESERV 7200 Framing type Super Frame (SF) or D4 Extended Super Frame (ESF) Coding type AMI or B8ZS The coding type must be set up in the system to match the T1 span and is contained in MMC 808.
  • Page 65 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 6 SEPTEMBER 2005 T1/E1/PRI Port (RJ-45) Pin No. Function E1/PRI Function Figure 6.2 RJ-45 Port of TEPRI Board...

  • Page 66: Connecting Stations And Additional Equipment

    PART 7. CONNECTING STATIONS AND ADDITIONAL EQUIPMENT This section describes how to connect various stations and additional equipment, such as analog/digital phones, door phones and door locks, to the OfficeServ 7200 system. 7.1 CONNECTING STATIONS 7.1.1 Safety Precautions To reduce the risk of personal injury, follow these precautions before connecting telephone circuits: •...
  • Page 67 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 7 SEPTEMBER 2005 P1~P8 (RJ-45) P1 port Pin No. Function PFT TIP PFT RING SLI TIP SLI RING P2-P8 port Pin No. Function SLI TIP SLI RING Figure 7.1 RJ-45 Port of the 8SLI Board...
  • Page 68 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 7 SEPTEMBER 2005 S1-S8 Port (RJ-45) S1-S8 Port Pin No. Function SLI TIP SLI RING Figure 7.3 RJ-45 Port of the 8COMBO Board (For Analog Phone) 7.1.3 Connecting a Digital Phone Connect a digital phone to 8DLI, 16DLI2 or 8COMBO board.
  • Page 69 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 7 SEPTEMBER 2005 CONNECTING TO 8COMBO BOARD Connect a digital phone to the 8COMBO board by using a twisted pair of AWG #24 or AWG #26 wires. D1~D8 Port (RJ-45) Pin No.
  • Page 70 Wireless LAN service offered by the OfficeServ 7200 system requires the following equipment: • 4WLI board: A board installed in the OfficeServ 7200 system for WBS24 connection • WBS24: Wireless LAN Access Point (AP) • WIP-5000M: Wireless LAN IP phone Table 7.2 Specification for Wireless LAN Connection...
  • Page 71 Sync line 7.1.7 Connecting to a Door Phone and a Door Lock Connect a door phone and a door lock to the OfficeServ 7200 system by using a Door Phone Interface Module (DPIM). 1) Connect a twisted pair of #24 AWG or #26 AWG wires to the LINE port of DPIM and to P1 through P8 of 8DLI/16DLI2/8COMBO boards of the OfficeServ 7200 system.
  • Page 72 100 mA. Do not attempt to connect commercial AC power to these contact. MMC 211 is used to assign call numbers to door phones. Use MMC 501 program duration of contact closure. For detailed instruction on the MMC program, refer to OfficeServ 7200 Programming Section.
  • Page 73 7.1.8 Connecting KDB-D/KDB-S KDB-D and KDB-S are modules installed on a digital phone connected to the OfficeServ 7200 system. The KDB module enhances the functions of the phone and increases the number of local ports according to module types. Caution for connecting KDB module KDB-D and KDB-S is only for a digital phone connected to the 8DLI board, not for a digital phone connected to a 16DLI2 board.
  • Page 74 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 7 SEPTEMBER 2005 telephones to a port may result in incorrect operation or damage to the card. Figure 7.13. iDCS KDB-SINGLE LINE INTERFACE (FKDBS) This is a daughter board that can be installed only in the 18 or 28 button keyset. The FKDBS will provide one additional SLI circuit for the connection of any standard telephone device.
  • Page 75 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 7 SEPTEMBER 2005 RETAINING SCREWS RETAINING SCREWS Figure 7.13 Keyset Base KDB-SLI This daughterboard can be installed only in the DCS 12 or DCS 24 button keyset. Before performing this procedure, unplug the line cord from the keyset and remove the base wedge.
  • Page 76 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 7 SEPTEMBER 2005 MOUNTING SCREWS RIBBON CABLE CONNECTOR Figure 7.14 Installing KDB-DLI Daughter Board OUTPUT JACK Figure 7.15 Keyset Daugherboard Output Jack 7.11...
  • Page 77 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 7 SEPTEMBER 2005 HOOK PLUG RIBBON CABLE FROM DAUGHTERBOARD INTO RIBBON CABLE CONNECTOR P7 Figure 7.16 Connecting Keyset Daugherboard to Keyset PCB RIBBON CABLE CONNECTOR MOUNTING SCREWS Figure 7.17 Installing KDB-SLI Daughterboard...
  • Page 78 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 7 SEPTEMBER 2005 LINE CORD SECOND KEYSET FIRST KEYSET Figure 7.18 Connecting a Keyset to a KDB-DLI LINE CORD SINGLE LINE TELEPHONE FIRST KEYSET Figure 7.19 Connecting a Single Line Telephone to a KDB-SLI...
  • Page 79 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 7 SEPTEMBER 2005 Figure 7.20 Connecting a Station Device to a KDB via MDF CONNECTING TO THE KDBS There are two methods for connecting devices to keyset daughterboards. The simplest method is to connect the second device directly by means of a line cord.
  • Page 80 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 7 SEPTEMBER 2005 HOLES FOR MOUNTING SCREWS NOTE: THE DIRECTORY CARD SLIDE TRAY IS NOT Figure 7.21 Wall-Mounting a Keyset WALL-MOUNTING KEYSETS iDCS keysets come equipped with a reversible base wedge. To wall-mount a keyset, remove the wedge from the keyset and remove the directory tray from the wedge.
  • Page 81 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 7 SEPTEMBER 2005 USED FOR ATTACHING AOM OR 64B MODULE WITH CONNECTOR CLIP HOLES FOR MOUNTING SCREWS NOTE: THE DIRECTORY CARD SLIDE TRAY IS NOT Figure 7.22 Ultra Base Wedge WALL-MOUNTING KEYSETS WITH ULTRA BASE WEDGE The keysets now come equipped with a new Ultra Base wedge.
  • Page 82 It must be assigned to that station in MMC 209. A maximum of four (4) 64 button modules can be programmed on a system. OfficeServ 7200 system can have a maximum of two (2) 64 button modules per keyset.
  • Page 83 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 7 SEPTEMBER 2005 Figure 7.24 Attaching 24B/12B to 64BM ATTACHING DCS 32 BUTTON AOM AND DCS 64B MODULES WITH MASTER STATION These new Ultra Base Wedges allow a connector clip (packaged with 64B Modules and AOMs) to be connected to the underside of the new style wedge and attach AOM(s) or 64B module(s) together with the main or “master”...
  • Page 84 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 7 SEPTEMBER 2005 Figure 7.25 Attaching 24B/12B to AOM ATTACHING iDCS 64 BUTTON MODULES TO AN iDCS KEYSET First remove the base wedge from the iDCS 64 Button Module and attach the bracket to it with two of the screws provided (see Figure 7.27).
  • Page 85 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 7 SEPTEMBER 2005 7B / SINGLE LINE ULTRA BASE WEDGE AOM ULTRA BASE WEDGE METAL CONNECTOR CLIP 7B/SINGLE LINE ULTRA BASE WEDGE 64BM ULTRA BASE WEDGE METAL CONNECTOR CLIP Figure 7.26 Attaching 7B/Single Line to AOM and 7B/Single Line to 64 BM...
  • Page 86 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 7 SEPTEMBER 2005 6) Place the support bracket over the ribbon cable and secure with the six screws provided. 7) Reattach the base pedestal. Figure 7.27 Attaching iDCS 64 Button Module to an iDCS Keyset...
  • Page 87 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 7 SEPTEMBER 2005 REMOVE KNOCKOUTS Figure 7.28 Attaching iDCS 14 Button Module to an iDCS Keyset 7.22...

  • Page 88: Connecting Additional Equipment

    Internal Chimes 7.2.1 Connecting MOH/BGM Equipment The OfficeServ 7200 system offers music on hold. The system provides internal tone/music and external music sources per C.O. or extension lines as the music source. Two external music sources are offered. Connect the music sources to the MISCI port of the MCP board.
  • Page 89 Instead of an internal speaker, external broadcasting equipment, such as amps or speakers, and additional equipment that can broadcast page(ring) signals outside a building can be connected to the OfficeServ 7200 system. Connect external/additional paging equipment to the MISC1 and MISC2 ports of the MCP board.
  • Page 90 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 7 SEPTEMBER 2005 The Page Zone Relay ports assigned to each dry contact pair are listed in the following table. Assign the DN number to the selected page zone using Default DN (Ports).
  • Page 91 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 7 SEPTEMBER 2005 MISC DEFAULT FUNCTION # in MMC 724 Next connect the output from the MIS daughter card to a customer provided paging system or other suitable customer provided speaker, see Figure 7.31.
  • Page 92 1 Gbytes or higher CONNECTING OFFICESERV MANAGER (OSM) TO LAN PORT The OSM application can only communicate to the OfficeServ 7200 system via the LAN connection. The OSM PC can connect to the MCP via LAN connection using a customer provided LAN switch or using the LIM module as shown in Figure 7.32.
  • Page 93 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 7 SEPTEMBER 2005 • If an MCP is behind a firewall and OSM is outside the firewall, ports 5000, 5003, and 5200 (TCP) must be open to the private IP address of the MCP.
  • Page 94 Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 7 SEPTEMBER 2005 SETTING REMOTE OSM PARAMETERS 1) Execute OSM. 2) Click [Link] [CommSetup] menu on the OfficeServ Manager main screen. Figure 7.33 OSM Screen 3) Enter the system name into the [Address] field of the <Communications Setup>...
  • Page 95 Traffic Reports, Alarm Reports, Hotel Report and much more. Refer to MMC 829 configure the report type and data output network configuration (See OfficeServ 7200 Programming Manual). This MMC can also configure the reports to be sent to PCs running 3 party applications (i.e.

  • Page 96: Power Up Procedures

    Make sure the SmartMedia Card with system software is in the SmartMedia slot. Make sure the memory backup switch on MCP is in the ON position. Turn on the power of the OfficeServ 7200 expansion cabinet first, then turn on the power of the main cabinet.

  • Page 97: Checking The Fan

    Table of Contents Home Page OfficeServ 7200 INSTALLATION TECHNICAL MANUAL PART 8 SEPTEMBER 2005 Check the LEDs of the MCP and LCP boards. The RUN LED of the MCP board lights green and the SM LED flashes when the system normally starts the booting process.

  • Page 98: Numbering Extensions And C.o. Lines

    According to the setting of the S3 switch (SW6, SW7, SW8) of the MCP/LCP board, the OfficeServ 7200 system assigns 3 or 4 digits to C.O. lines, extensions, and extension groups. Refer to Section 3. Installing and Replacing Boards of this manual for details on setting the S3 switch.

  • Page 99: Software And Database Management

    MANAGEMENT 9.1 SOFTWARE MANAGEMENT The OfficeServ 7200 operating software is stored on the SmartMedia card which is inserted into the front of the MCP card. The SmartMedia card has 32 Megabytes of NAND flash memory and is formatted, with a custom format to allow faster loading, in a similar manner to a hard disk.
  • Page 100 SYSTEM 10.1 ADDING STATIONS AND TRUNKS 1) Power the OfficeServ 7200 OFF before adding a new board. Locate a suitable empty card slot. Having located a suitable slot, insert the new card into the slot and push firmly in the middle of both card ejectors on the card to ensure that it is fully inserted into the back plane connector.

Table of Contents