Canon EOS R3 Advanced User's Manual

Table of Contents

Quick Links

Download this manual

Advanced User Guide

CT2-D147-A

Table of Contents

Troubleshooting

Summary of Contents for Canon EOS R3

Page 2: Table Of Contents
Contents Introduction..........9 Package Contents.
Page 3 Av: Aperture-Priority AE......... 131 M: Manual Exposure.
Page 4 Canon Log Settings........
Page 5 Other Menu Functions......... . 390 General Movie Recording Precautions.
Page 6 Resizing JPEG/HEIF Images........565 Cropping JPEG/HEIF Images.
Page 7 Resetting Communication Settings....... . 839 Set-up..........840 Tab Menus: Set-up.
Page 8 Battery Information..........910 Copyright Information.
Page 9: Introduction
Also be aware that certain public performances, exhibitions, etc. may prohibit photography even for private enjoyment. Connecting other devices Use the included interface cable or a Canon cable when connecting the camera to a computer or other device. When connecting an interface cable, also use the included cable protector ( •...
Page 10: Package Contents
Package Contents Before use, make sure the following items are included in the package. If anything is missing, contact your dealer. Camera (with body cap (Camera Cover R-F-5), battery compartment cap, and shoe cover) Eyecup ER-h Battery Pack LP-E19 (with protective cover) Battery Charger LC-E19 (with protective cover) Strap...
Page 11 Attach Eyecup ER-h to the viewfinder eyepiece. Be careful not to lose any of these items. No software CD-ROM is included. Software ( ) can be downloaded from the Canon website. Caution The transmission rate when the included interface cable is used is equivalent to...
Page 12: Compatible Accessories
Compatible Accessories Check the following website for details on compatible accessories. https://cam.start.canon/H002/...
Page 13: Instruction Manuals
The included Instruction Manual provides basic camera instructions. Advanced User Guide Complete instructions are provided in this Advanced User Guide. For the latest Advanced User Guide, refer to the following website. https://cam.start.canon/C010/ Lens Instruction Manuals View or download from the following website. https://cam.start.canon/...
Page 14: Quick Start Guide
Quick Start Guide Insert the battery ( Upon purchase, charge the battery to start using ( Insert the card ( You can insert two cards. Attach the lens ( Align the red mount index on the lens with the red mount index on the camera to attach the lens.
Page 15 Set the lens's focus mode switch to < > ( Set the power switch to < > ( Flip out the screen ( When the date/time/zone setting screen is displayed, see Date/Time/ Zone.
Page 16 Set the shooting mode to [ ] ( Press the < > button, then turn the < > dial to select [ ]. Focus on the subject ( A tracking frame [ ] appears over any face detected. Press the shutter button halfway, and the camera will focus on the subject.
Page 17 Review the picture. The image just captured will be displayed for approx. 2 sec. on the screen. To display the image again, press the < > button (...
Page 18: About This Guide
About This Guide Icons in This Guide Basic Assumptions for Operational Instructions and Sample Photos Icons in This Guide Indicates the Main dial. < > Indicates Quick control dial 1. < > Indicates Quick control dial 2. < > Indicates the Multi-controller. <...
Page 19 Basic Assumptions for Operational Instructions and Sample Photos Before following any instructions, make sure the power switch is set to < > ( and the Multi-function lock feature is off ( It is assumed that all the menu settings and Custom Functions are set to their defaults. Illustrations in this guide show the camera with the RF24-105mm F4 L IS USM lens attached as an example.
Page 20: Compatible Cards
Compatible Cards The following cards can be used with the camera regardless of capacity. If the card is new or was previously formatted (initialized) by another camera or computer, format it with this camera ( CFexpress cards * Type-B compatible SD/SDHC/SDXC memory cards * UHS-II and UHS-I cards compatible Cards That Can Record Movies...
Page 21: Safety Instructions
Safety Instructions Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the operator of the product or others. WARNING : Denotes the risk of serious injury or death. Keep the product out of the reach of young children.
Page 22 Observe the following instructions when using a battery charger or AC adapter. • Periodically remove any dust buildup from the power plug and power outlet using a dry cloth. • Do not plug in or unplug the product with wet hands. •...
Page 23 CAUTION : Follow the cautions below. Otherwise physical injury or property damage may result. Do not fire the flash near the eyes. It may hurt the eyes. Do not look at the screen or through the viewfinder for prolonged periods of time. This may induce symptoms similar to motion sickness.
Page 24: Handling Precautions
If you accidentally drop the camera into water or are concerned that moisture (water), dirt, dust, or salt may have gotten inside it, promptly consult the nearest Canon Service Center. Never leave the camera near anything having a strong magnetic field such as a magnet or electric motor.
Page 25 If you have not used the camera for some time or if there is an important shoot such as a foreign trip coming up, have the camera checked by your nearest Canon Service Center or check the camera yourself and make sure it is working properly.
Page 26 Besides dust entering the camera from outside, in rare cases, lubricant from the camera's internal parts may adhere to the front of the sensor. If smudges are visible on images, have the sensor cleaned by a nearest Canon Service Center.
Page 27: Part Names
Part Names Attaching the Strap Using the Cable Protector ( 1 ) ( 9 ) ( 10 ) ( 2 ) ( 11 ) ( 12 ) ( 3 ) ( 13 ) ( 4 ) ( 14 ) ( 15 ) ( 5 ) (16 ) ( 6 )
Page 28 Self-timer lamp/AF-assist beam Shutter button Multi-function button 2 (M-Fn 2) Depth-of-field preview button Grip < > Vertical-grip Multi-function button < > Vertical-grip Main dial Vertical-grip shutter button RF lens mount index (10) Lens mount (11) Lens lock pin (12) Lens release button (13) Shutter curtain/Image sensor (14)
Page 29 (19) (20) (21) (22) (23) (24) ( 9 ) (25) ( 10 ) (26) ( 11 ) (27) ( 12 ) (28) ( 13 ) ( 14 ) (29) (15) (16) (30) (31) (17) (32) ( 18 ) (33)
Page 30 Eyecup Multi-function shoe Flash sync contacts < > Focal plane mark < > Drive mode/AF operation selection button Microphone < > Flash exposure compensation/metering mode selection button Strap mount < > External microphone IN terminal (10) < > Digital terminal (11) <...
Page 31 ( 10 ) ( 11 ) ( 12 ) ( 13 ) ( 14 ) ( 1 ) ( 15 ) ( 16 ) ( 2 ) ( 3 ) ( 17 ) ( 18 ) ( 4 ) ( 19 ) ( 5 ) ( 20 ) ( 6 )
Page 32 Viewfinder eyepiece < > Multi-controller (can also be pressed straight in) < > Info button < > Set button < > Quick control dial 1 < > Playback button < > Network lamp < > Magnify/reduce button < > Erase button (10) Dioptric adjustment knob (11)
Page 33 LCD panel information display Information displayed varies depending on camera status. For icon details, see Information Display. Viewfinder information display Information displayed varies depending on camera status. Battery Pack LP-E19 Battery lock lever Contacts Protective cover Battery release handle...
Page 34 Battery Charger LC-E19 Charger for Battery Pack LP-E19 ( Contacts Battery slots Power cord socket Recharge performance check button/Calibration button Charge lamp/Recharge performance check lamp/Discharge time lamp Calibration (discharge) lamp Protective cover (two included) Power cord...
Page 35 Attaching the Strap Pass the end of the strap through the strap mount from the bottom, then pass it through the strap buckle as shown. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle.
Page 36 Using the Cable Protector When connecting the camera to a computer, use the included interface cable or a Canon cable. Use a commercially available HDMI cable when connecting the camera to a monitor or other display device. When connecting an interface cable, use the included cable protector. Using the cable protector helps prevent accidental disconnection and terminal damage.
Page 37 With the included interface cable and a slim commercially available HDMI cable (3) Included interface cable (4) Slim commercially available HDMI cable...
Page 38 With an included or optional Canon interface cable and a thick commercially available HDMI cable (5) Included or optional Canon interface cable...
Page 39 With only an optional Canon interface cable or a commercially available HDMI cable When using only an optional Canon interface cable or a thick/slim commercially available HDMI cable, pass the cable through the clamp (2) as shown before attaching the clamp to...
Page 40 Caution Using the camera when an interface cable or HDMI cable is connected without the cable protector may damage the camera terminal. Make sure each cable is securely connected to the camera terminal.
Page 41: Software
Software Software Overview Downloading and Installing EOS Software or Other Dedicated Software Software Instruction Manuals Software Overview This section summarizes software used with EOS cameras. Note that downloading and installing the software requires an internet connection. The software cannot be downloaded or installed in environments without an internet connection.
Page 42 Downloading and Installing EOS Software or Other Dedicated Software Always install the latest version of the software. Update any previous versions that are installed by overwriting them with the latest version. Caution Do not connect the camera to a computer before you install the software. The software will not be installed correctly.
Page 43 Download the software. Connect to the internet from a computer and access the following Canon website. https://cam.start.canon/ Select your country or region of residence and download the software. Depending on the software, you may need to enter the camera's serial number.
Page 44 Software Instruction Manuals Check the following website for software instruction manuals. https://cam.start.canon/...
Page 45: Preparation And Basic Operations
Preparation and Basic Operations This chapter describes preparatory steps before you start shooting and the basic camera operations. • Charging the Battery • Inserting/Removing Batteries • Inserting/Removing Cards • Using the Screen • Turning on the Power • Attaching/Detaching RF Lenses •...
Page 46: Charging The Battery
Charging the Battery Connect and plug in the battery charger. Connect the power cord to the charger and plug the other end into a power outlet. All indicator lamps are off when no batteries are loaded. Remove the protective cover. Remove the included protective covers from the charger and battery.
Page 47 Charge the battery. Slide the battery in (in the opposite direction from protective cover removal) and make sure it is securely attached to the charger. You can load a battery into either slot or slot Charging begins automatically, and the charge lamp blinks or lights up in green.
Page 48 Upon purchase, the battery is not fully charged. Charge the battery before use. Charge the battery on the day before or on the day it is to be used. Charged batteries gradually lose their charge, even when they are not used. After charging the battery, remove it and disconnect the charger from the power outlet.
Page 49 < > lamp in green), remove the battery and contact your dealer or the nearest Canon Service Center. If the three charge lamps blink during calibration, remove the battery and contact your dealer or the nearest Canon Service Center.
Page 50: Inserting/Removing Batteries
Inserting/Removing Batteries Insertion Removal Insert a fully charged Battery Pack LP-E19 into the camera. Insertion Remove the battery compartment cap. Insert the battery. Insert the battery firmly, all the way in, then turn the battery release handle as shown by the arrow. Caution There may be a slight delay before the camera turns on when a battery is used in the camera for the first time.
Page 51 Note Wipe away any dirt on the battery's water-repellent rubber lining (1) with a moistened cotton swab.
Page 52 Removal Turn the battery release handle and remove the battery. Make sure the power switch is set to < > ( Flip out the battery release handle, turn it as shown by the arrow, and remove the battery. To prevent short-circuits, always attach the included protective cover ) to the battery.
Page 53: Inserting/Removing Cards
Inserting/Removing Cards Insertion Formatting the Card Removal This camera accepts two cards. Recording is possible as long as there is at least one card in the camera. With two cards inserted, you can select one card to record to, or you can record the same image to both cards at once ( Caution Make sure the SD card's write-protect switch (1) is set upward to enable...
Page 54 Insert the card. Card 1 (CFexpress card) Card 2 (SD card) The card in the rear card slot is [ ] (CFexpress card), and the one in front of it is [ ] (SD card). CFexpress card: With the card label facing you, insert the open side of the card (2) into the card slot.
Page 55 Close the cover. Close the cover and slide it in the direction shown by the arrows until it snaps shut.
Page 56 Set the power switch to < > ( (3) Card selection icon (4) Card 1 (CFexpress card) (5) Card 2 (SD card) Icons representing loaded cards are shown on the shooting screen ) accessed by pressing the < > button and on the Quick Control screen ( ).
Page 57 Formatting the Card If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera (...
Page 58 Removal Open the cover. Set the power switch to < >. Check that the access lamp (1) is off, then open the cover. If [Saving...] is displayed on the screen, close the cover. Remove the card. CFexpress card: Press the card 1 eject button (2) to eject the card. SD card: Gently press the card in, then release it to eject it.
Page 59 Note The number of shots available varies depending on remaining card capacity and settings such as image quality and ISO speed. Setting [ : Release shutter without card] to [Disable] will prevent you from forgetting to insert a card ( Caution When the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from the card, or data is being transferred.
Page 60: Using The Screen
Using the Screen You can change the direction and angle of the screen. Flip out the screen. Rotate the screen. When the screen is out, you can tilt it up or down or rotate it to face the subject. Indicated angles are only approximate. Face it toward you.
Page 61 Caution Avoid forcing the screen into position as you rotate it, which puts undue pressure on the hinge. When a cable is connected to a camera terminal, the rotation angle range of the flipped-out screen will be limited. Note Keep the screen closed and facing the camera body when the camera is not in use. You can protect the screen.
Page 62: Turning On The Power
Turning on the Power Setting the Date, Time, and Time Zone Changing the Interface Language Automatic Sensor Cleaning Battery Level Indicator < > The camera turns on. < > The camera turns on. Multi-function locking is engaged ( < > The camera is turned off and does not function.
Page 63 Setting the Date, Time, and Time Zone If you turn on the camera and the date/time/zone setting screen appears, see Date/Time/ Zone to set the date/time/zone. Changing the Interface Language To change the interface language, see Language. Automatic Sensor Cleaning Whenever the power switch is set to <...
Page 64 Battery Level Indicator When the power switch is set to < >, the battery level will be indicated. Display Level (%) 100–70 69–50 49–20 19–10 9–1 Note Doing any of the following will exhaust the battery faster: • Pressing the shutter button halfway for a prolonged period. •...
Page 65: Attaching/Detaching Rf Lenses
Attaching/Detaching RF Lenses Attaching a Lens Detaching a Lens Caution Do not look at the sun directly through any lens. Doing so may cause loss of vision. When attaching or detaching a lens, set the camera's power switch to < >.
Page 66 Attaching a Lens Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. Attach the lens. Align the red mount index on the lens with the red mount index on the camera and turn the lens as shown by the arrow until it clicks in place.
Page 67 Set the lens's focus mode switch to < >. < > stands for autofocus. < > stands for manual focus. Autofocus will not operate. For RF lenses without a focus mode switch, set to [AF] or [MF] in the camera menu, in [ : Focus mode].
Page 68 Detaching a Lens While pressing the lens release button, turn the lens as shown by the arrow. Turn the lens until it stops, then detach it. Attach lens caps to the lens you removed.
Page 69: Attaching/Detaching Ef/Ef-S Lenses
Attaching/Detaching EF/EF-S Lenses Attaching a Lens Detaching a Lens All EF and EF-S lenses can be used by attaching an optional Mount Adapter EF-EOS R. The camera cannot be used with EF-M lenses. Attaching a Lens Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows.
Page 70 Attach the lens to the adapter. Align the red or white mount index on the lens with the corresponding mount index on the adapter and turn the lens as shown by the arrow until it clicks into place. (1) Red index (2) White index Attach the adapter to the camera.
Page 71 Set the lens's focus mode switch to < >. < > stands for autofocus. < > stands for manual focus. Autofocus will not operate. Remove the front lens cap.
Page 72 Detaching a Lens While pressing the lens release button, turn the adapter as shown by the arrow. Turn the lens until it stops, then detach it. Detach the lens from the adapter. Hold down the lens release lever on the adapter and turn the lens counterclockwise.
Page 73: Multi-Function Shoe
Multi-Function Shoe Using the Multi-Function Shoe The multi-function shoe is a hot shoe that supplies power to accessories and offers advanced communication functionality. Using the Multi-Function Shoe Removing the shoe cover Remove the shoe cover (1) by pressing the part labeled (A) in the figure as shown with your finger.
Page 74 Attaching the shoe cover After removing accessories from the multi-function shoe, reattach the shoe cover to protect the contacts from dust and water. Slide the shoe cover all the way in by pressing the part labeled (B) in the figure, as shown.
Page 75: Using The Viewfinder
Using the Viewfinder Adjusting the Viewfinder Using Eyecup ER-hE (Sold Separately) Look through the viewfinder to activate it. You can also restrict display to either the screen or viewfinder ( Adjusting the Viewfinder Turn the dioptric adjustment knob. Turn the knob left or right to make the viewfinder display look sharp. Caution The viewfinder and screen cannot be activated at the same time.
Page 76 Using Eyecup ER-hE (Sold Separately) Using Eyecup ER-hE may help improve eye control accuracy under intense light sources and enhance viewfinder visibility outdoors. Detach the eyecup. Press in the position indicated.
Page 77 Attach Eyecup ER-hE. Hold the eyecup as shown. Slide along the viewfinder eyepiece grooves to attach, and press all the way in. You can rotate Eyecup ER-hE as necessary for adjustment. It clicks every 90° and can be rotated 360°.
Page 78 To remove Eyecup ER-hE: Hold the eyecup as shown in step 2 and lift straight up.
Page 79: Using Eye Control
Using Eye Control Performing Calibration Using Eye Control for AF Configuring Pointer Display Managing Calibration Data You can control focusing by looking at AF points to select them in viewfinder shooting (eye control). The process of registering characteristics of your line of sight for accurate detection of eye movement by the camera in viewfinder shooting is called calibration.
Page 80 Select [Calibration (CAL)]. Calibration results (calibration data) are saved to the current [CAL no.] number. Select [Start]. Look through the viewfinder. Holding the camera horizontally, look through the viewfinder so that the four corners of the screen appear evenly spaced. Press the <...
Page 81 Start calibration. Look at the indicator displayed and press the < > button. Keep looking at the indicator without blinking until it disappears. This process is repeated for indicators at five positions (center, right, left, top, and bottom). Perform calibration for vertical shooting. For higher eye control accuracy, select [Refine] and perform calibration for vertical shooting.
Page 82 Exit calibration. Select [Exit]. Calibration results (calibration data) are saved to the calibration number shown in step 2. After calibration, look through the viewfinder and make sure the pointer moves in response. If the pointer does not seem to follow your gaze closely, perform calibration again.
Page 83 Adding calibration data To register calibration data for other users or eyewear conditions, select an available number to assign the data to from the numbers labeled with [ ] on the [CAL no.] screen, then perform calibration.
Page 84 Using Eye Control for AF Caution Always use eye control under the same eyewear conditions as when you performed calibration (such as with or without glasses or contact lenses). Note Also read General eye control precautions Enhancing eye control accuracy. Menu settings Select [ : Eye control Select [Eye control...
Page 85 Select [On]. You can enable switching between [Eye control] [Enable] and [Disable] from the Quick Control screen by customizing the Quick Control screen ( Select [CAL no.]. Select a calibration number matching your eyewear conditions (such as with or without glasses). Select calibration data to use.
Page 86 Operations in viewfinder shooting Look at the subject. A pointer (1) is displayed when you look through the viewfinder. With [ : Subject tracking] set to [On], a tracking frame [ ] (2) is also displayed when subjects are detected. Look at the position where you wish to focus.
Page 87 Confirm the subject to start focusing. Pressing the shutter button halfway confirms the subject to focus on. With [ : AF area] set to [Whole area AF], the camera focuses in the area near the pointer. With the AF area set to an option other than [Whole area AF], the camera focuses after moving the AF area to the pointer position.
Page 88 Using eye control to display the focus guide By setting [ : Focus guide] to [On], you can use eye control to display the focus guide for assistance when focusing manually. Look at the subject. Look at the subject to focus on. Press the shutter button halfway.
Page 89 General eye control precautions When multiple people will use eye control on the same camera, each person should select a different calibration number and perform calibration. Similarly, when the same person will use eye control with and without glasses or contact lenses, a different calibration number should be selected and calibration performed for each situation.
Page 90 Enhancing eye control accuracy The camera can learn about eye characteristics from the calibration data it collects. Eye control accuracy can be improved by repeating calibration under various levels of brightness (such as indoors, outdoors, during the day, and at night) for the same calibration number.
Page 91 Configuring Pointer Display You can configure pointer display, including whether the pointer is visible or not. Pointer display Pointer visibility can be set to [On], [Shtg standby], or [Off]. • Select [Shtg standby] to keep the pointer visible from when you look through the viewfinder until the moment you confirm the subject to focus on using eye control.
Page 92 Display format Choose [ ] or [ ] as the style of pointer displayed.
Page 93 Managing Calibration Data Entering names You can enter names to identify calibration data. Select a calibration data number. Select the number and press the < > button. Enter text. Use the < > or < > dial or < > to select a character, then press <...
Page 94 Saving and loading calibration data Registered calibration data can be saved to a card. You can also load calibration data from a card to use it. Select [Calibration (CAL)]. Select [Save/load (card)]. Select [Save to card]. Select [Save to card] to save all calibration data on the camera to the card.
Page 95 Deleting calibration data Eye control is less accurate if the same calibration number is used for calibration under different eyewear conditions (such as with or without glasses or contact lenses) or by multiple users. In this case, delete the calibration data and perform calibration again. Select [Calibration (CAL)].
Page 96: Basic Operations
Basic Operations Holding the Camera Shutter Button < > Main Dial < > Quick Control Dial 1 < > Quick Control Dial 2 < > Multi-Controller < > Mode Button < > Multi-Function Button < > AF Start Button/Smart Controller <...
Page 97 Holding the Camera Viewing the screen as you shoot As you shoot, you can tilt the screen to adjust it. For details, see Using the Screen. (1) Normal angle (2) Low angle (3) High angle Shooting through the viewfinder To obtain sharp images, hold the camera still to minimize camera shake. (1) Horizontal shooting (2) Vertical shooting 1.With your right hand, hold the camera firmly by the camera grip.
Page 98 Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture value. The exposure value (shutter speed and aperture value) is displayed on the screen, in the viewfinder, or on the LCD panel for 8 sec.
Page 99 Note The camera will still pause before taking a picture if you press the shutter button completely without pressing it halfway first, or if you press the shutter button halfway and immediately press it completely. Even during menu display or image playback, you can return to shooting standby by pressing the shutter button halfway.
Page 100 < > Main Dial (1) After pressing a button, turn the < > dial. Press a button such as < >, < >, < >, or < >, then turn the < > dial. If you press the shutter button halfway, the camera will go back to shooting standby. Used for operations such as setting the ISO speed, drive mode, AF operation, white balance, and flash exposure compensation.
Page 101 < > Quick Control Dial 1 (1) After pressing a button, turn the < > dial. Press a button such as < >, < >, < >, or < >, then turn the < > dial. If you press the shutter button halfway, the camera will go back to shooting standby. Used for operations such as selecting the ISO speed, drive mode, AF operation, white balance, and flash exposure compensation.
Page 102 < > Quick Control Dial 2 (1) After pressing a button, turn the < > dial. Press a button such as < >, then turn the < > dial. If you press the shutter button halfway, the camera will go back to shooting standby. Used for operations such as switching between main tabs on the menu screen.
Page 103 < > Multi-Controller < > is an eight-direction key with center button. To use it, press lightly with the tip of your thumb. Examples of using the Multi-controller • AF point/magnified frame movement in still photo shooting or movie recording •...
Page 104 < > Mode Button You can set the shooting mode. Press the < > button, then use < >, < >, < >, or < > to select a shooting mode.
Page 105 < > Multi-Function Button By pressing the < > button and turning the < > dial, you can set the ISO speed ), drive mode ( ), AF operation ( ), white balance ( ), and flash exposure compensation ( To select the AF area, press the <...
Page 106 < > AF Start Button/Smart Controller On this control, you can press the center or drag with your finger. Pressing the < > button activates autofocusing. This is equivalent to pressing the shutter button halfway. You can move the AF point by dragging on the smart controller after pressing the <...
Page 107 < > Multi-Function Lock Switch Configuring [ : Multi function lock] ( ) and setting the power/multi-function lock switch to < > prevents settings from being changed by accidentally touching the Main dial, Quick Control dials, Multi-controller, control ring, or touch-screen panel.
Page 108 < > LCD Panel Info Switching/Illumination Button Each press of the < > button changes the information on the LCD panel. Illuminate the LCD panel by holding down the < > button (...
Page 109 Vertical Shooting Vertical shooting controls such as buttons, dials, and a Multi-controller are arranged near the bottom of the camera ( Vertical-grip Multi-function button Vertical-grip Main dial Vertical-grip shutter button Vertical-grip Multi-function button 2 Vertical-grip depth-of-field preview button Vertical-grip Multi-controller Vertical-grip AF start button/Smart controller Vertical-grip Quick control dial 2 Vertical-grip AE lock button...
Page 110 < > Control Ring By default, exposure compensation can be set by turning the control ring of RF lenses or mount adapters while pressing the shutter button halfway in [ ], [ ], [ ], [ ], or [ mode. Otherwise, you can assign a different function to the control ring by customizing operations in [ : Customize dials] (...
Page 111 Button Backlighting < >, < >, < >, < >, and < > button backlighting is activated during LCD panel illumination, menu or Quick Control screen display, or image playback. This makes it easier to see the button layout in low-light locations. Button backlighting is deactivated when the metering timer starts, which is triggered by pressing the shutter button halfway, for example.
Page 112 < > Info Button Each press of the < > button changes the information shown. The following sample screens are for still photos.
Page 113: Menu Operations And Settings
Menu Operations and Settings Menu Screen Menu Setting Procedure Dimmed Menu Items < > button < > button < > button Screen < > Quick control dial 1 < > button < > Quick control dial 2 < > Main dial...
Page 114 Menu Screen Main tabs Secondary tabs Menu items : Shooting : Autofocus : Playback : Communication functions : Set-up : Custom Functions (10) : My Menu (11) Menu settings...
Page 115 Menu Setting Procedure Display the menu screen. Press the < > button to display the menu screen. Select a tab. Each time you turn the < > dial, the main tab (group of functions) will switch. You can also switch tabs by pressing the < >...
Page 116 Select an option. Turn the < > dial to select an option. The current setting is indicated in blue. Set an option. Press < > to set it. Exit the setting. Press the < > button to return to shooting standby. Note The description of menu functions hereafter assumes that you have pressed the <...
Page 117 Dimmed Menu Items Example: When focus bracketing has been set Dimmed menu items cannot be set. The menu item is dimmed if another function setting is overriding it. You can see the overriding function by selecting the dimmed menu item and pressing <...
Page 118: Quick Control
Quick Control You can directly and intuitively select and set the settings displayed. Press the < > button (...
Page 119 Select a setting item and set your preferred option. To select an item, turn the < > dial or press < > up or down. To adjust the setting, turn the < > or < > dial, or press < >...
Page 120: Touch-Screen Operation
Touch-Screen Operation Tapping Dragging Tapping Sample screen (Quick Control) Use your finger to tap (touch briefly and then remove your finger from) the screen. For example, when you tap [ ], the Quick Control screen appears. By tapping [ you can return to the preceding screen. Note To have the camera beep for touch operations, set [ : Beep] to [Enable] ( Responsiveness to touch operations can be adjusted in [ : Touch control] (...
Page 121 Dragging Sample screen (Menu screen) Slide your finger while touching the screen.
Page 122: Shooting Mode
Shooting Mode This chapter describes shooting modes. • Fv: Flexible-Priority AE • P: Program AE • Tv: Shutter-Priority AE • Av: Aperture-Priority AE • M: Manual Exposure • BULB: Long (Bulb) Exposures...
Page 123: Fv: Flexible-Priority Ae
Fv: Flexible-Priority AE In this mode, you can set shutter speed, aperture value, and ISO speed manually or automatically and combine these settings with your choice of exposure compensation. Shooting in [ ] mode, with control over each of these parameters, is equivalent to shooting in [ ], [ ], [ ], or [...
Page 124 Set the amount of exposure compensation. Turn the < > dial and select the exposure level indicator. [ ] or ] appears to the left of the exposure level indicator. Turn the < > or < > dial to set the level. To reset the setting to [±0], press the <...
Page 125 Note Values for shutter speed, aperture value, and ISO speed that are set to [AUTO] are underlined. You can set shutter speed, aperture value, and ISO speed to [AUTO] and exposure compensation amount to [±0] in step 2 or 3 by holding down the < >...
Page 126: P: Program Ae
P: Program AE The camera automatically sets the shutter speed and aperture value to suit the subject's brightness. * [ ] stands for Program. * AE stands for Auto Exposure. Set the shooting mode to [ ]. Press the < >...
Page 127 Take the picture. Compose the shot and press the shutter button completely. Caution If the “30"” shutter speed and the lowest aperture value blink, it indicates underexposure. Increase the ISO speed or use flash. If the “1/8000” shutter speed and the highest aperture value blink, it indicates overexposure.
Page 128: Tv: Shutter-Priority Ae
Tv: Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture value to obtain the standard exposure matching the brightness of the subject. A faster shutter speed can freeze the action of a moving subject. A slower shutter speed can create a blurred effect, giving the impression of motion.
Page 129 Set the desired shutter speed. Turn the < > dial to set it. Focus on the subject. Press the shutter button halfway. The aperture value is set automatically. Check the display and shoot. As long as the aperture value is not blinking, the standard exposure will be obtained.
Page 130 Note Shutter speed display For example, “0"5” indicates 0.5 sec. and “15"”, 15 sec. Shutter speeds from “64000” to “4” on the LCD panel indicate the denominator of the fractional shutter speed.
Page 131: Av: Aperture-Priority Ae
Av: Aperture-Priority AE Depth-of-Field Preview In this mode, you set the desired aperture value and the camera sets the shutter speed automatically to obtain the standard exposure matching the subject brightness. A higher f/ number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus.
Page 132 Set the desired aperture value. Turn the < > dial to set it. Focus on the subject. Press the shutter button halfway. The shutter speed is set automatically. Check the display and shoot. As long as the shutter speed is not blinking, the standard exposure will be obtained.
Page 133 Note Aperture value display The higher the value, the smaller the aperture opening will be. The aperture value displayed varies depending on the lens. If no lens is attached to the camera, “F00” will be displayed for the aperture. Depth-of-Field Preview Press the depth-of-field preview button to stop down the lens to the current aperture value setting and check the area in focus (depth of field).
Page 134: M: Manual Exposure
M: Manual Exposure Exposure Compensation with ISO Auto In this mode, you set both the shutter speed and aperture value as desired. To determine the exposure, refer to the exposure level indicator or use a commercially available exposure meter. ] stands for Manual. Set the shooting mode to [ Press the <...
Page 135 Focus on the subject. Press the shutter button halfway. Check the exposure level mark [ ] to see how far the current exposure level is from the standard exposure level. (1) Standard exposure index (2) Exposure level mark Set the exposure and take the picture. Check the exposure level indicator and set the desired shutter speed and aperture value.
Page 136 Note In [ ] mode with ISO Auto, [ ] (evaluative metering), and [ : AE lock meter. mode after focus] set to the default setting ( ), holding down the shutter button halfway locks the ISO speed after the camera focuses with One-Shot AF. When ISO Auto is set, you can press the <...
Page 137: Bulb: Long (Bulb) Exposures
BULB: Long (Bulb) Exposures Bulb Timer In this mode, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. Use bulb exposures for night scenes, fireworks, astrophotography, and other subjects requiring long exposures. Set the shooting mode to [ Press the <...
Page 138 Take the picture. The exposure will continue for as long as you keep the shutter button pressed completely. Elapsed exposure time is displayed on the LCD panel. Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source.
Page 139 Select [ : Bulb timer]. Select [Enable]. Select [Enable], then press the < > button. Set the exposure time. Select an option (hours : minutes : seconds). Press < > to display [ ]. Set a value, then press < >.
Page 140 Select [OK]. Take the picture. After you press the shutter button completely, the bulb exposure continues for your specified time. ] and the exposure time are displayed on the LCD panel during bulb timer shooting. To clear the timer setting, select [Disable] in step 2. Caution Bulb exposure stops if you press the shutter button completely and release it during the timer.
Page 141: Shooting And Recording
Shooting and Recording This chapter describes shooting and recording and introduces menu settings on the shooting [ ] tab. • Still Photo Shooting • Movie Recording...
Page 142: Still Photo Shooting
Still Photo Shooting To prepare for still photo shooting, set the still photo shooting/movie recording switch to < >, then press the < > button and choose a shooting mode. • Tab Menus: Still Photo Shooting • Image Quality • Still Photo Cropping/Aspect Ratio •...
Page 143 • Focus Bracketing • Interval Timer Shooting • Silent Shutter Function • Shutter Mode • Releasing Shutter without Card • Image Stabilizer (IS Mode) • Customizing Quick Controls • Shooting with the Touch Shutter • Image Review • High-Speed Display •...
Page 144: Tab Menus: Still Photo Shooting
Tab Menus: Still Photo Shooting Shooting 1 quality Img type/size Cropping/aspect ratio Shooting 2 Expo.comp./AEB ISO speed settings HDR shooting HDR Mode Auto Lighting Optimizer Highlight tone priority...
Page 145 Shooting 3 Anti-flicker shoot. HF anti-flicker shooting External Speedlite control Metering mode Shooting 4 White balance Set Custom WB WB Shift/Bkt. Color space (5) Picture Style • Picture Style Selection • Picture Style Customization • Picture Style Registration Clarity Lens aberration correction...
Page 146 Shooting 5 Long exp. noise reduction High ISO speed NR Dust Delete Data Shooting 6 Multiple exposure Focus bracketing...
Page 147 Shooting 7 Drive mode Interval timer Bulb timer Silent shutter function Shutter mode Release shutter without card Shooting 8 IS (Image Stabilizer) mode Customize Quick Controls Touch Shutter Image review High speed display Metering timer Caution : IS (Image Stabilizer) mode] is not displayed when an IS-equipped lens is attached.
Page 148 Shooting 9 Display simulation OVF sim. view assist Shooting info. disp. VF display format Disp. performance...
Page 149: Image Quality
Image Quality Image Size Selection RAW Images Guide to Image Quality Settings Maximum Burst for Continuous Shooting JPEG/HEIF Quality Note “Image quality” in this guide refers to both image size and JPEG/HEIF quality ( Image Size Selection You can specify , , or for JPEG/HEIF images and for RAW...
Page 150 Set the image size. Standard/Auto switch card/Record to multiple For RAW images, turn the < > dial to select the size, and for JPEG/HEIF images, turn the < > dial. Press < > to set it. Record separately When [ Rec options] in [ : Record func+card/folder sel.] is set to [Rec.
Page 151 Note is set if you set both RAW and JPEG/HEIF to [ Two versions of each shot are recorded at your specified image quality when you have selected both RAW and JPEG/HEIF. Both images have the same file number but each has a different file extension, with .JPG for JPEG, .HIF for HEIF and .CR3 for RAW.
Page 152 RAW images captured by this camera. If a previous version of DPP Ver. 4.x is installed on your computer, obtain and install the latest version of DPP from the Canon website to update it ( ), which will overwrite the previous version.
Page 153 Guide to Image Quality Settings Still photo file size / Number of possible shots / Maximum burst for continuous shooting for details on file size, number of shots available, maximum burst, and other estimated values.
Page 154 Maximum Burst for Continuous Shooting The approximate maximum burst is displayed at the upper left of the shooting screen and lower right of the viewfinder. Note If the maximum burst is displayed as “99”, it indicates that you can shoot 99 or more shots continuously.
Page 155 JPEG/HEIF Quality Select [ quality]. Select the desired image size. Select the image size, then press < >. Set the desired quality (compression). Select the number, then press < >. Higher numbers offer higher quality (lower compression). Quality of 6–10 is indicated by < >, and 1–5, by <...
Page 156 Note The higher the quality, the fewer shots will be available. In contrast, the lower the quality, the more shots will be available.
Page 157: Still Photo Cropping/Aspect Ratio
Still Photo Cropping/Aspect Ratio Normally with RF or EF lenses, images are captured at the sensor size of approx. 36.0×24.0mm in full-frame shooting, but in cropped shooting, you can isolate and magnify the center of the image approx. 1.6× (APS-C size) as if using a telephoto lens, or you can set an aspect ratio as needed before shooting.
Page 158 Select how the shooting area is displayed. On the screen in step 2, press the < > button. Select the type of display, then press < >. Caution image quality options are not available when [1.6x (crop)] is set, or with EF-S lenses. Shooting with [1.6x (crop)] and image quality set to produces images, respectively.
Page 159 Take the picture. Setting examples When is set When is set or an EF-S lens is used When is set When is set...
Page 160 When [1.6x (crop)] is set or an EF-S lens is used, an image magnified approx. 1.6× is displayed. When [1:1 (aspect ratio)], [4:3 (aspect ratio)], or [16:9 (aspect ratio)] is set, the image within the black masked or outlined area is captured. Caution Areas outside the cropped area are not recorded in RAW shooting when [1.6x (crop)] is set, or with EF-S lenses.
Page 161: Auto Exposure Bracketing (Aeb)
Auto Exposure Bracketing (AEB) In exposure bracketing, three consecutive images are captured at different exposures within your specified range of up to ±3 stops (in 1/3-stop increments) by automatically adjusting the shutter speed, aperture value, or ISO speed. * AEB stands for Auto Exposure Bracketing. Setting with camera controls Press the <...
Page 162 Take the picture. Standard exposure Decreased exposure Increased exposure Three bracketed shots are taken, according to the specified drive mode, in this sequence: Standard exposure, decreased exposure, and increased exposure. AEB will not be automatically canceled. To cancel AEB, follow step 2 to set the AEB range to “0.”...
Page 163 Set the AEB range. Turn the < > dial to set the AEB range (1). By turning the < > dial, you can set the exposure compensation amount. Press < > to set it. When you close the menu, the AEB range will be displayed on the screen.
Page 164 Note ] blinks in the lower left of the screen during AEB. If the drive mode is set to [ ], press the shutter button three times for each shot. In [ ], [ ], or [ ] mode, holding down the shutter button completely captures three images, one after another, before the camera automatically stops shooting.
Page 165: Iso Speed Settings For Still Photos
ISO Speed Settings for Still Photos ISO Speed Range When Set Manually ISO Speed Range Used with ISO Auto Minimum Shutter Speed for ISO Auto Set the ISO speed (image sensor's sensitivity to light) to suit the ambient light level. For details on ISO speed in movie recording, see ISO Speed in Movie Recording.
Page 166 Note ISO speed can also be set in the ISO speed item by pressing the < > button with an image displayed on the screen. Can also be set on the [ISO speed] screen in [ ISO speed settings]. To expand the manual ISO speed setting range from L (equivalent to ISO 50) to H (equivalent to ISO 204800), adjust [ISO speed range] in [ ISO speed settings] (...
Page 167 ISO Speed Range When Set Manually You can set the manual ISO speed setting range (minimum and maximum limits). You can set the minimum limit within L (equivalent to ISO 50) to ISO 102400, and the maximum limit within ISO 100 to H (equivalent to ISO 204800). Select [ ISO speed settings].
Page 168 Set [Maximum]. Select the [Maximum] box, then press < >. Select the ISO speed, then press < >. Select [OK].
Page 169 ISO Speed Range Used with ISO Auto You can set the automatic ISO speed range for ISO Auto within ISO 100–51200. The minimum can be set within ISO 100–51200 and the maximum within ISO 200–51200, in 1- stop increments. Select [Auto range]. Set [Minimum].
Page 170 Set [Maximum]. Select the [Maximum] box, then press < >. Select the ISO speed, then press < >. Select [OK]. Note The [Minimum] and [Maximum] settings will also function as the minimum and maximum speeds for ISO speed safety shift (...
Page 171 Minimum Shutter Speed for ISO Auto To prevent shutter speeds from being set too low automatically, you can set the minimum shutter speed for ISO Auto. This is effective in [ ] or [ ] mode when shooting subjects in motion with a wide-angle lens, or when using a telephoto lens.
Page 172 Set the desired minimum shutter speed. Auto If you select [Auto], turn the < > dial to set the difference relative to standard speed (toward Slower or Faster), then press < >. Manual If you select [Manual], turn the < >...
Page 173: Hdr Pq Settings
HDR PQ Settings PQ in HDR PQ refers to the gamma curve of the input signal for displaying HDR images. HDR PQ settings enable the camera to produce HDR images conforming to the PQ specification defined in ITU-R BT.2100 and SMPTE ST.2084. (Actual display depends on monitor performance.) Shots are captured as HEIF or RAW images.
Page 174 Caution Expanded ISO speeds (L, H) are not available in HDR shooting. Some scenes may look different from how they appear on an HDR display device. Unused signal values are roughly indicated by image areas in gray in the histogram when [ : HDR shooting ] is set to [Enable].
Page 175: Hdr Mode
HDR Mode You can shoot still photos with clipped highlights and shadows reduced for a high dynamic range of tones even in high-contrast scenes. HDR shooting is effective for landscape and still-life shots. HDR shooting enhances gradation in dark image areas by merging three images deliberately captured at different exposures (standard, underexposed, and overexposed) to produce an HDR image that compensates for loss of detail in dark image areas.
Page 176 Set [Limit max brightness] (only with [ : HDR shooting ] set to [Enable]). With [Disable], maximum brightness is not limited. Recommended when you will review images on a monitor supporting display at brightnesses exceeding 1000 nits. With [1000 nits], maximum brightness is limited to approx. 1000 nits. Set [Continuous HDR].
Page 177 Set [Auto Image Align]. For handheld shooting, select [Enable]. When using a tripod, select [Disable]. Set [HDR ghost correc.]. Shooting moving subjects may leave afterimages of the subject. With [Enable], images are processed to correct ghosting. HDR images can be produced faster with [Disable] than with [Enable]. Specify the images to save.
Page 178 Take the picture. When you press the shutter button completely, three consecutive images will be captured, and the HDR image will be recorded to the card. Caution Expanded ISO speeds (L, H) are not available in HDR shooting. The flash will not fire during HDR shooting. AEB is not available.
Page 179 Note The electronic shutter is used in HDR shooting. Image quality of RAW HDR images is as follows. • [ : HDR shooting ] set to [Disable]: JPEG quality • [ : HDR shooting ] set to [Enable]: HEIF quality HDR image quality in RAW+JPEG or RAW+HEIF shooting corresponds to your specified JPEG or HEIF image quality.
Page 180: Auto Lighting Optimizer
Auto Lighting Optimizer Brightness and contrast can be corrected automatically if shots look dark or contrast is too low or high. Select [ : Auto Lighting Optimizer]. Set a correction option. Caution Noise may increase and apparent resolution may change, under some shooting conditions.
Page 181 Note To enable [ : Auto Lighting Optimizer] to be set even in [ ] and [ ] modes, press the < > button in step 2 to clear the checkmark [ ] for [Disabled in M or B modes].
Page 182: Highlight Tone Priority
Highlight Tone Priority You can reduce overexposed, clipped highlights. Select [ : Highlight tone priority]. Set an option. [Enable]: Improves gradation in highlights. The gradation between the grays and highlights becomes smoother. [Enhanced]: Reduces overexposed highlights even more than [Enable], under some shooting conditions. Caution Noise may increase slightly.
Page 183 Note : Highlight tone priority] is set to [Enable] and cannot be changed when you set [ : HDR shooting ] to [Enable] after pressing the < > button to add a checkmark to this setting. : Highlight tone priority] will be set to [Disable] even if you set [ : HDR shooting ] to [Enable], with [Adjust dyn range] in [...
Page 184: Anti-Flicker Shooting
Anti-Flicker Shooting Uneven exposure and color may appear in continuous shooting at fast shutter speeds under flickering light sources such as fluorescent lights, due to uneven vertical exposure. Anti- flicker shooting enables you to take pictures when exposure and colors are less affected by flickering.
Page 185 Caution When [Enable] is set and you shoot under a flickering light source, the shutter- release time lag may become longer. Also, the continuous shooting speed may become slower, and the shooting interval may become irregular. Flicker at a frequency other than 50Hz or 60Hz cannot be detected. Also, if the flickering frequency of the light source changes during continuous shooting, effects of the flicker cannot be reduced.
Page 186: High-Frequency Anti-Flicker Shooting
High-Frequency Anti-Flicker Shooting Images may be affected by banding if you shoot under light sources that flicker at high frequencies. High-frequency anti-flicker shooting enables you to take pictures at suitable shutter speeds for high-frequency flickering, which minimizes the effect of this flickering on images.
Page 187 Select [HF anti-flicker shooting]. Select [On].
Page 188 Select an option. Manual setting ( Auto detecting (...
Page 189 Auto detecting The camera detects 50.0–2011.2 Hz light sources and displays a suitable shutter speed for shooting under light sources that flicker at high frequencies. You can then switch to the indicated shutter speed. Set the desired shutter speed. Set the shutter speed you would prefer to shoot at. For light sources that flicker at high frequencies, the camera will determine a suitable shutter speed near this value.
Page 190 Switch to the indicated shutter speed. Select [Yes] to switch to the recommended shutter speed. Selecting [Yes (move to Tv settings)] will display the [Manual setting] screen. Go to step 2 in Manual setting. Take the picture. Caution The range of the recommended shutter speed indicated varies by shutter mode. •...
Page 191 Note Movie display is not updated if high-frequency flickering is automatically detected during HDMI output of 4K movies. Manual setting Check on the screen for image areas affected by light sources that flicker at high frequencies, then find a suitable shutter speed. Select [Manual setting].
Page 192 Take the picture. Caution The shutter speed range available for the manual setting mode varies by shutter mode. • Mechanical shutter: 1/50.0 to 1/2048.0 sec. • Electronic first-curtain: 1/50.0 to 1/2048.0 sec. • Electronic shutter: 1/50.0 to 1/8192.0 sec. • Movie recording: 1/50.0 to 1/4096.0 sec. Maximum flash sync speed in flash photography is limited to 1/159.8 sec.
Page 193: Shooting With Speedlites
Shooting with Speedlites EL/EX Series Speedlites for EOS Cameras Canon Speedlites Other Than the EL/EX Series Non-Canon Flash Units EL/EX Series Speedlites for EOS Cameras Features of EL/EX series Speedlites (sold separately) can be used in flash photography with the camera.
Page 194 Caution Some Speedlites cannot be attached directly to this camera. For details, see Multi- Function Shoe. Setting [ : Auto Lighting Optimizer] ( ) to an option other than [Disable] may still cause images to look bright even if you set lower flash exposure compensation for darker images.
Page 195 Canon Speedlites Other Than the EL/EX Series With an EZ/E/EG/ML/TL series Speedlite set to A-TTL or TTL autoflash mode, the flash can be fired at full output only. Set the camera's shooting mode to [ ] or [ ] and adjust the aperture value before shooting.
Page 196 Non-Canon Flash Units Sync speed Sync speed for non-Canon compact flash units varies by shutter mode. Sync Speed : Shutter mode] Setting Mechanical 1/200 sec. or slower Elec. 1st-curtain 1/250 sec. or slower Electronic 1/180 sec. or slower With large studio flash units, the flash duration is longer than that of a compact flash unit and varies depending on the model.
Page 197: Flash Function Settings
Flash Function Settings Flash Firing E-TTL Balance E-TTL II Flash Metering Continuous Flash Control Slow Synchro Flash Function Settings Flash Custom Function Settings Clearing Flash Function Settings/Clearing All Speedlite Custom Functions Functions of EL/EX Series Speedlites compatible with flash function settings can be set via a camera menu screen.
Page 198 Select an option. Flash Firing To enable flash photography, set to [Enable]. To enable only the AF-assist beam of the Speedlite, set to [Disable].
Page 199 E-TTL Balance You can set your preferred appearance (balance) for flash shots. This setting enables you to adjust the ratio of ambient light to Speedlite light output. Set the balance to [Ambience priority] to lower the proportion of flash output and uses ambient light to produce lifelike shots with a natural mood.
Page 200 E-TTL II Flash Metering Set to [Eval (FacePrty)] for flash metering suitable for shots of people. Set to [Evaluative] for flash metering that emphasizes firing in continuous shooting. If [Average] is set, the flash exposure will be averaged for the entire metered scene. Note Depending on the scene, flash exposure compensation may be necessary.
Page 201 Continuous Flash Control Set to [E-TTL each shot] to perform flash metering for each shot. Set to [E-TTL 1st shot] to perform flash metering for only the first shot before continuous shooting. The flash output level for the first shot is applied to all subsequent shots.
Page 202 Slow Synchro You can set the flash-sync speed for flash photography in [ ] or [ ] mode. Note that the maximum flash synchronization speed varies depending on the [ : Shutter mode] setting. It is 1/180 sec. when set to [Electronic], 1/250 sec. for [Elec. 1st-curtain], and 1/200 sec. for [Mechanical].
Page 203 * 3: [1/250-1/60sec. auto] ( ) when set to [Elec. 1st-curtain] or [1/200-1/60sec. auto] ( ) for [Mechanical]. * 4: [1/250 sec. (fixed)] ( ) when set to [Elec. 1st-curtain] or [1/200 sec. (fixed)] ( ) for [Mechanical]. Caution High-speed sync is not available in [ ] or [ ] mode when set to [1/180 sec.
Page 204 Flash Function Settings The information displayed on the screen, position of display, and available options vary depending on the Speedlite model, its Custom Function settings, the flash mode, and other factors. For details on the Speedlite's functions, refer to the Speedlite's Instruction Manual. Sample display Flash mode Wireless functions / Firing ratio control (RATIO)
Page 205 Flash mode You can select the flash mode to suit your desired flash photography. [E-TTL II flash metering] is the standard mode of EL/EX series Speedlites for automatic flash photography. [Manual flash] is for setting the Speedlite's [Flash output level] yourself. [CSP] (Continuous shooting priority mode) is available when using a compatible Speedlite.
Page 206 Wireless functions You can use radio or optical wireless transmission to shoot with wireless multiple-flash lighting. For details on wireless flash, refer to the Instruction Manual of a Speedlite compatible with wireless flash photography. Firing ratio control (RATIO) With a macro flash, you can set the firing ratio control. For details on firing ratio control, refer to the Instruction Manual of the macro flash.
Page 207 Shutter synchronization Normally, set this to [First-curtain synchronization] so that the flash fires immediately after the shooting starts. Set to [Second-curtain synchronization] and use low shutter speeds for natural-looking shots of subject motion trails, such as car headlights. Set to [High-speed synchronization] for flash photography at higher shutter speeds than the maximum flash sync shutter speed.
Page 208 Note If flash exposure compensation is set with the Speedlite, you cannot set the flash exposure compensation with the camera. If it is set with both the camera and Speedlite, the Speedlite's setting overrides the camera's.
Page 209 Flash exposure bracketing Speedlites equipped with flash exposure bracketing (FEB) can change the external flash output automatically as three shots are taken at once.
Page 210 Flash Custom Function Settings For details on the Speedlite's Custom Functions, refer to the Instruction Manual of the Speedlite. Select [Flash C.Fn settings]. Set the desired functions. Select the number. Select an option. Caution EX series Speedlites always fire at full output when the [Flash metering mode] Custom Function is set to [1:TTL] (autoflash).
Page 211 Clearing Flash Function Settings/Clearing All Speedlite Custom Functions Select [Clear settings]. Select the settings to be cleared. Select [Clear flash settings] or [Clear all Speedlite C.Fn's]. Select [OK] on the confirmation screen to clear all flash settings or Custom Function settings.
Page 212: White Balance
White Balance White Balance ] Auto White Balance ] Setting a Color Temperature White balance (WB) is for making the white areas look white. Normally, the Auto [ (Ambience priority) or [ ] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object.
Page 213 Select a white balance setting. Turn the < > dial to make a selection. Note For [ ] and [ ] setting instructions, see ] Auto White Balance. To set your preferred color temperature, select [ ] in [ : White balance], then turn the <...
Page 214 White Balance The human eye adapts to changes in lighting so that white objects look white under all kinds of lighting. Digital cameras determine white from the color temperature of lighting and, based on this, apply image processing to make color tones look natural in your shots.
Page 215 ] Auto White Balance With [ ] (Ambience priority), you can slightly increase the intensity of the image's warm color cast when shooting a tungsten-light scene. If you select [ ] (White priority), you can reduce the intensity of the image's warm color cast.
Page 216 Caution Precautions when set to [ ] (White priority) The warm color cast of subjects may fade. When multiple light sources are included in the scene, the warm color cast of the picture may not be reduced. When using flash, the color tone will be the same as with [ ] (Ambience priority).
Page 217 ] Setting a Color Temperature A value can be set representing the white balance color temperature. Select [ : White balance]. Set the color temperature. Select [ Turn the < > dial to set a color temperature, then press < >.
Page 218: Custom White Balance
Custom White Balance Registering Custom White Balances Selecting and Shooting with Custom White Balances Naming Custom White Balances With custom white balance, you can manually set the white balance for the specific light source of the shooting location. Make sure to perform this procedure under the light source at the actual location of the shoot.
Page 219 Select a custom white balance number to be registered. Press < >. Turn the < > dial to select a number from 1 to 5 for [ *], then press < >. The custom white balance will be registered to the selected number.
Page 220 Shoot a plain white object. The selected number blinks in the upper left of the screen and on the LCD panel. Aim the outlined area over a plain white object, so that white fills the area. Focus manually and shoot with the standard exposure set for the white object.
Page 221 Registration from the Quick Control screen Press the < > button. Select the white balance setting item. Select [Custom]. Select a custom white balance number to register the white balance data to. Turn the < > dial to select a number from 1 to 5, then press the <...
Page 222 Shoot a plain white object ( The custom white balance is registered to the camera. To shoot with the registered custom white balance, see Selecting and Shooting with Custom White Balances. Note If [Correct WB may not be obtained with the selected image] is displayed in step 4, return to step 1 and shoot again.
Page 223 Select a custom white balance number to be registered. Press < >. Turn the < > dial to select a number from 1 to 5 for [ *], then press < >. The custom white balance will be registered to the selected number.
Page 224 Select [OK]. The custom white balance will be registered to the camera. Check the message and select [OK] to return to the screen in step 3. Caution If the exposure obtained in step 1 differs greatly from the standard exposure, a correct white balance may not be obtained.
Page 225 Selecting and Shooting with Custom White Balances Setting from the menu Select the custom white balance number. (1) Registered image On the [Set Custom WB] screen, select the number of the registered custom white balance. Select [Set as white balance]. The white balance setting changes to [ Take the picture.
Page 226 Setting from the Quick Control screen Press the < > button. Select the white balance setting item. Select [Custom]. Select the custom white balance number. Turn the < > dial to select a number from 1 to 5, then press the <...
Page 227 Naming Custom White Balances You can add a name (caption) to the five registered custom white balances (custom white balance nos. 1–5). Select the custom white balance number. On the [Set Custom WB] screen, select the number of the registered custom white balance to add a name to.
Page 228 Enter text. Use < >, < >, or < > to select a character, then press < > to enter it. By selecting [ ], you can change the input mode. To delete single characters, select [ ] or press the < >...
Page 229: White Balance Correction
White Balance Correction White Balance Correction White Balance Auto Bracketing You can correct the white balance that is set. This adjustment will have the same effect as using a commercially available color temperature conversion filter or color compensating filter. White Balance Correction Select [ : WB Shift/Bkt.].
Page 230 Set the white balance correction. Sample setting: A2, G1 Use < > to move the “■” mark on the screen to your preferred position. B is for blue, A for amber, M for magenta, and G for green. White balance is corrected in the direction you move the mark. The direction and amount of correction are indicated in the upper right of the screen.
Page 231 White Balance Auto Bracketing White balance bracketing enables you to capture three images at once with different color tones. Setting the white balance bracketing amount In step 2 for White Balance Correction, when you turn the < > dial, the “■” mark on the screen will change to “■...
Page 232 Note The images will be bracketed in the following sequence: 1. Standard white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard white balance, 2. Magenta (M) bias, and 3. Green (G) bias. You can also set white balance correction and AEB together with white balance bracketing.
Page 233: Color Space
Color Space Adobe RGB The range of reproducible colors is called the “color space.” For normal shooting, sRGB is recommended. Select [ : Color space]. Set a color space option. Select [sRGB] or [Adobe RGB], then press < >. Adobe RGB This color space is mainly used for commercial printing and other professional applications.
Page 234: Picture Style Selection
Picture Style Selection Picture Style Characteristics Symbols Just by selecting a preset Picture Style, you can obtain image characteristics effectively matching your photographic expression or the subject. Select [ : Picture Style]. Select a Picture Style.
Page 235 Picture Style Characteristics Auto The color tone will be adjusted automatically to suit the scene. The colors will look vivid for blue skies, greenery and sunsets, particularly in nature, outdoor, and sunset scenes. Note If the desired color tone is not obtained with [Auto], use another Picture Style. Standard The image looks vivid, sharp, and crisp.
Page 236 User Def. 1–3 You can add a new style based on presets such as [Portrait] or [Landscape] or a Picture Style file, then adjust it as needed ( ). With any User Defined Picture Style that has not yet been registered, pictures will be taken with the same characteristics settings as with the default settings of [Standard].
Page 237 Symbols Icons on the Picture Style selection screen represent [Strength], [Fineness], and [Threshold] for [Sharpness] as well as [Contrast] and other parameters. The numbers indicate the values for these settings specified for the respective Picture Style. Sharpness Strength Fineness Threshold Contrast Saturation Color tone...
Page 238: Picture Style Customization
Picture Style Customization Settings and Effects Monochrome Adjustment You can customize any Picture Style by changing it from the default settings. For details on customizing [Monochrome], see Monochrome Adjustment. Select [ : Picture Style]. Select a Picture Style. Select the Picture Style to adjust, then press the < >...
Page 239 Select an option. Select an option, then press < >. For details on settings and effects, see Settings and Effects. Set the effect level. Adjust the effect level, then press < >. Press the < > button to save the adjusted setting and return to the Picture Style selection screen.
Page 240 Note For movie recording, [Fineness] and [Threshold] for [Sharpness] cannot be set (not displayed). By selecting [Default set.] in step 3, you can restore the parameter settings of the respective Picture Style to the defaults. To shoot with the Picture Style you adjusted, first select the adjusted Picture Style, then shoot.
Page 241 Monochrome Adjustment Filter effect Even with the same monochrome image, you can make white clouds, green trees, or other elements stand out more by applying a filter effect. Filter Sample Effects N:None Normal black-and-white image with no filter effects. Ye:Yellow Blue sky will look more natural, and white clouds will look crisper.
Page 242: Picture Style Registration
Picture Style Registration You can select a base Picture Style such as [Portrait] or [Landscape], adjust it as desired, and register it under [User Def. 1] – [User Def. 3]. Useful when creating several Picture Styles with different settings. Picture Styles that you have registered on the camera using EOS Utility (EOS software, can also be modified here.
Page 243 Press < >. With [Picture Style] selected, press < >. Select a base Picture Style. Select the base Picture Style, then press < >. Also select styles this way when adjusting styles registered to the camera with EOS Utility (EOS software). Select an option.
Page 244 Set the effect level. Adjust the effect level, then press < >. For details, see Picture Style Customization. Press the < > button to save the adjusted setting and return to the Picture Style selection screen. The base Picture Style will be indicated on the right of [User Def. *]. Blue style names in [User Def.
Page 245: Clarity
Clarity You can adjust image clarity, as determined by the contrast of image edges. Set toward the negative end to make images look softer or toward the positive end for a sharper appearance. Select [ : Clarity]. Set the effect level. Caution Setting clarity may darken or lighten the areas around boundaries in high-contrast images.
Page 246: Lens Aberration Correction
Lens Aberration Correction Peripheral Illumination Correction Distortion Correction Digital Lens Optimizer Chromatic Aberration Correction Diffraction Correction Vignetting, image distortion, and other issues may be caused by lens optical characteristics. The camera can compensate for these phenomena by using [Lens aberration correction]. Select [ : Lens aberration correction].
Page 247 Select a setting. Confirm that the name of the attached lens and [Correction data available] are displayed. If [Correction data not available] or [ ] is displayed, see Digital Lens Optimizer. Peripheral Illumination Correction Vignetting (dark image corners) can be corrected. Caution Depending on shooting conditions, noise may appear on the image periphery.
Page 248 Distortion Correction Distortion (image warping) can be corrected. Caution To correct distortion, the camera captures a narrower image area than the area seen in viewfinder shooting, which crops the image a little and slightly lowers the apparent resolution. Applying distortion correction may change the angle of view slightly. The amount of image cropped may vary between still photos and movies.
Page 249 Digital Lens Optimizer Various aberrations from lens optical characteristics can be corrected, along with diffraction and low-pass filter-induced loss of resolution. If [Correction data not available] or [ ] is displayed by [Digital Lens Optimizer], you can use EOS Utility to add the lens correction data to the camera. For details, refer to the EOS Utility Instruction Manual.
Page 250 Chromatic Aberration Correction Chromatic aberration (color fringing around subjects) can be corrected. Note [Chromatic aberr corr] is not displayed when [Digital Lens Optimizer] is set to [Standard] or [High].
Page 251 General precautions for lens aberration correction Lens aberration correction cannot be applied to existing JPEG/HEIF images. When using a non-Canon lens, setting the corrections to [Disable] is recommended even if [Correction data available] is displayed. Magnifying the periphery of the image may display parts of the image that will not be recorded.
Page 252 Note General notes for lens aberration correction Effects of lens aberration correction vary by lens and shooting conditions. Also, the effect may be difficult to discern depending on the lens used, shooting conditions, etc. If the correction is difficult to discern, magnifying and checking the image after shooting is recommended.
Page 253: Long Exposure Noise Reduction
Long Exposure Noise Reduction Noise such as dots of light or banding that tends to occur in long exposures at shutter speeds of one sec. or slower can be reduced. Select [ : Long exp. noise reduction]. Set a reduction option. Auto For images exposed for 1 sec.
Page 254 Caution With [Auto] or [Enable] set, noise reduction after you shoot may take as long as exposure for the shot. Images may look grainier with the [Enable] setting than with the [Disable] or [Auto] setting. [BUSY] is displayed as noise is reduced, and the shooting screen is not displayed until processing is finished, when you can shoot again.
Page 255: High Iso Speed Noise Reduction
High ISO Speed Noise Reduction You can reduce the image noise generated. This function is especially effective when shooting at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced. Select [ : High ISO speed NR].
Page 256 Caution Precautions on Multi Shot Noise Reduction If there is significant misalignment in the image due to camera shake, the noise reduction effect may become smaller. Be careful about camera shake in handheld shots. Using a tripod is recommended. If you shoot a moving subject, the moving subject may leave afterimages. Auto image alignment may not function properly with repetitive patterns (lattice, stripes, etc.) or flat, single-tone images.
Page 257: Dust Delete Data Acquisition
Dust Delete Data Acquisition Preparation Dust Delete Data Appending Dust Delete Data used to erase dust spots can be appended to images in case sensor cleaning leaves dust on the sensor. The Dust Delete Data is used by Digital Photo Professional (EOS software) to erase the dust spots automatically.
Page 258 Select [OK]. After the automatic self-cleaning of the sensor is performed, a message will appear. Although there will be a mechanical sound of the shutter during the cleaning, no picture is taken.
Page 259 Shoot a plain white object. Shoot with a plain white object (such as a new sheet of white paper) filling the screen, at a distance of 20–30 cm (0.7–1.0 ft.). Since the image will not be saved, the data can still be obtained even if there is no card in the camera.
Page 260 Dust Delete Data Appending The camera will append the Dust Delete Data obtained to all shots from now on. Acquiring Dust Delete Data before shooting is recommended. For details about using Digital Photo Professional (EOS software) to erase dust spots automatically, refer to the Digital Photo Professional Instruction Manual.
Page 261: Multiple Exposures
Multiple Exposures Merging Multiple Exposures with a JPEG Image Recorded on the Card Checking and Deleting Multiple Exposures During Shooting As you shoot multiple exposures (2–9), you can see how the images will be merged into a single image. Select [ : Multiple exposure].
Page 262 Set [Multiple exposure]. Select an option, then press < >. To exit shooting multiple exposures, select [Disable]. On:Func/Ctrl Convenient when shooting multiple exposures gradually as you check the results. During continuous shooting, the continuous shooting speed will decrease greatly. On:ContShtng Used for continuous multiple exposures of moving subjects.
Page 263 Set [Multi-expos ctrl]. Select a merging option, then press < >. Additive The exposure of each single image captured is added cumulatively. Based on [No. of exposures], set negative exposure compensation. Follow these basic guidelines to set the exposure compensation amount.
Page 264 Set [No. of exposures]. Select the number of exposures, then press < >. Specify the images to save. To save all single exposures and the multiple-exposure image, select [All images] and press < >. To save only the multiple-exposure image, select [Result only] and press <...
Page 265 Set [Continue Mult-exp]. Select an option, then press < >. With [1 shot only], multiple-exposure shooting will be canceled automatically after the shooting ends. With [Continuously], multiple-exposure shooting continues until the setting in step 2 is set to [Disable]. Shoot the first exposure. When [On:Func/Ctrl] is set, the captured image will be displayed.
Page 266 Shoot the next exposures. Images captured so far are displayed merged. For only image display, press the < > button repeatedly. Multiple-exposure shooting will end when the set number of exposures are taken. Note With [On:Func/Ctrl], you can press the < >...
Page 267 Select [Select image for multi. expo.]. Select the first image. Turn the < > dial to select the first image, then press < >. Select [OK]. The file number of the selected image will be displayed at the bottom of the screen.
Page 268 Take the picture. When you select the first image, the number of remaining exposures as set with [No. of exposures] will decrease by 1. Images you can select You can select a JPEG image shot at the same angle of view as the first selected JPEG. Images captured at a full-frame angle of view Images shot with an RF or EF lens and [ Cropping/aspect ratio] set to [Full-...
Page 269 Checking and Deleting Multiple Exposures During Shooting To view the multiple-exposure image so far, check exposure, and see how the images are merged, you can press the < > button before you finish shooting your specified number of exposures (when [On:Func/Ctrl] is set, but not with [On:ContShtng]). Pressing the <...
Page 270 Are there any restrictions on the image quality? Multiple exposures are captured as JPEG [ ] images. Even when [ : Img type/ size] is set to RAW only, these images are captured as JPEG [ ] images. Can I merge images recorded on the card? With [Select image for multi.
Page 271: Focus Bracketing
Focus Bracketing Focus bracketing enables continuous shooting with the focal distance changed automatically after each shot. From these images, you can create a single image in focus over a wide area by using an application that supports depth compositing, such as Digital Photo Professional (EOS software).
Page 272 Set [Number of shots]. Specify the number of images captured per shot. Can be set in a range of [2]–[999]. Set [Focus increment]. Specify how much to shift the focus. This amount is automatically adjusted to suit the aperture value at the time of shooting. Larger aperture values increase the focus shift and make focus bracketing cover a wider range under the same focus increment and number of shots.
Page 273 Set [Exposure smoothing]. You can suppress changes in image brightness during focus bracketing by setting [Exposure smoothing] to [Enable], which compensates for differences between the displayed and actual aperture value (effective f/number), which varies by focal position. Take the picture. To save your shots in a new folder, tap [ ] and select [OK].
Page 274 Shooting with a wider angle of view is recommended. After depth compositing, you can crop the image if necessary. For details on lenses compatible with this feature, visit the Canon website. Set [Exposure smoothing] to [Disable] with the following lenses, because they may cause changes in image brightness.
Page 275: Interval Timer Shooting
Interval Timer Shooting With the interval timer, you can set the shooting interval and number of shots, so that the camera takes individual shots repeatedly according to your interval until your specified number of shots are taken. Select [ : Interval timer]. Select [Enable].
Page 276 Set the shooting interval and number of shots. Select an option to set (hours : minutes : seconds / number of shots). Press < > to display [ ]. Set the desired number, then press < >. (Returns to [ Interval Can be set in a range of [00:00:01]–[99:59:59].
Page 277 Take the picture. First shot is taken and shooting continues according to the interval timer settings. During interval timer shooting, [ ] will blink. After the set number of shots are taken, the interval timer shooting will stop and be automatically canceled. Note Using a tripod is recommended.
Page 278 Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. With the lens's focus mode switch set to < >, the camera will shoot even when autofocusing is not possible.
Page 279: Silent Shutter Function
Silent Shutter Function Disables shutter release sounds, operating sounds, and firing and illumination of the flash and other light sources. The following settings are used and cannot be changed. Shutter mode: [Electronic] Shutter release sound, focused beep: only headphone output Touch sounds, self-timer sounds: silent Shutter at shutdown: open Long exposure noise reduction: [Disable]...
Page 280: Shutter Mode
Shutter Mode You can choose the method of shutter release. Select [ : Shutter mode]. Select an option. Mechanical Shooting activates the mechanical shutter. Elec. 1st-curtain Shooting only activates the second-curtain shutter. Electronic Enables reduced sound and vibration from shutter operations, compared to mechanical shutter or electronic first-curtain.
Page 281 : Silent shutter function] to [On] sets the shutter mode to [Electronic]. Zooming during continuous shooting may cause changes in exposure even at the same f/number. For details, refer to the Canon website. Precautions when set to [Electronic] The continuous shooting speed may become slower depending on the shooting conditions.
Page 282: Releasing Shutter Without Card
Releasing Shutter without Card You can set the camera not to shoot unless there is a card in the camera. The default setting is [Enable]. Select [ : Release shutter without card]. Select [Disable].
Page 283: Image Stabilizer (Is Mode)
Image Stabilizer (IS Mode) Focal Length This menu is displayed for configuration of camera IS mode settings when you are using a non-IS lens. The menu is not shown when IS-equipped lenses are used. In that case, setting the lens Image Stabilizer switch to < >...
Page 284 Select [Still photo IS]. [Always]: Provides constant image stabilization. [Only for shot]: Image stabilization is active only at the moment of shooting. Caution : IS (Image Stabilizer) mode] is not displayed when an IS-equipped lens is attached. In some cases, this may not provide sufficient stabilization for certain lenses. Note For details on image stabilization for movie recording, see Movie Digital...
Page 285 Select [Focal length]. Set the focal length. Turn the < > dial to select the digit of the focal length. Press < > to display [ ]. Set the desired number, then press < >. (Returns to [ Select [OK]. Caution Set [ : Release shutter w/o lens] to [Enable].
Page 286: Customizing Quick Controls
Customizing Quick Controls Resetting the Custom Quick Control Screen or Clearing All Items Quick Control items and the layout are customizable. Select [ : Customize Quick Controls]. Select [Edit layout].
Page 287 Select items to remove. Turn the < > dial or use < > to select an item to remove, then press < >. Items shown on the Quick Control screen are labeled with a checkmark. You can remove the items labeled with a checkmark. Select items to add.
Page 288 Change the layout. Use the < > dial to select an item to move, then press < >. Use the < > dial to move the item, then press < >. Press the < > button to exit setup. Select [Save and exit].
Page 289 Review the screen. Press the < > button to check the screen with your settings applied. Resetting the Custom Quick Control Screen or Clearing All Items Select [Reset settings] to restore the default Quick Control screen items and layout. Select [Clear all items] to remove all items from the layout, so that no Quick Control screen is displayed when the <...
Page 290: Shooting With The Touch Shutter
Shooting with the Touch Shutter Just by tapping the screen, you can focus and take the picture automatically. Enable the Touch Shutter. Tap [ ] in the lower left of the screen. Each time you tap the icon, it will toggle between [ ] and [ ] (Touch Shutter: Enable) The camera will focus on the spot you tap, then the picture will be...
Page 291 Tap the screen to shoot. Tap the face or subject on the screen. On the point you tap, the camera focuses (Touch AF) using your specified Area. When [ ] is set, the AF point turns green when focus is achieved, then the picture is taken automatically.
Page 292: Image Review
Image Review Review Duration Viewfinder Display Review Duration To keep the image displayed immediately after you shoot, set to [Hold], and if you prefer not to have the image displayed, set to [Off]. Select [ : Image review]. Select [Review duration]. Set a time option.
Page 293 Note When [Hold] is set, images are displayed as long as the time set in the [Screen off] option of [ : Power saving].
Page 294 Viewfinder Display Set to [Enable] for viewfinder display of your shots immediately after you shoot. Select [ : Image review]. Select [Viewfinder display]. Select an option. Note [Viewfinder display] settings take effect when [Image review] is set to an option other than [Off].
Page 295: High-Speed Display
High-Speed Display High-speed display that switches between each shot and the live image is available when shooting in [ ] (high-speed continuous shooting) drive mode and in a shutter mode other than electronic shutter. Select [ High speed display]. Select an option. Select [Enable] for display that switches between each shot and the live image.
Page 296 Caution Images may waver or flicker during high-speed display. This occurs more often at high shutter speeds. However, this does not affect shooting results. High-speed display is not performed for shutter speeds slower than 1/30 sec., aperture values higher than f/11, conditions that make autofocusing difficult, flash photography, or ISO expansion.
Page 297: Metering Timer
Metering Timer You can set how long the metering timer runs (which determines the duration of exposure value display/AE lock) after it is triggered by an action such as pressing the shutter button halfway. Select [ : Metering timer]. Set a time option.
Page 298: Display Simulation
Display Simulation With display simulation, display of image brightness and depth of field more closely matches the actual brightness (exposure) of your shots. Select [ : Display simulation]. Select an option. Exposure+DOF ( Image brightness and depth of field as displayed closely matches the actual brightness (exposure) of your shots.
Page 299 ] is dimmed if either exposure or depth of field simulation stops, or if both simulations stop. Zooming with certain lenses may change the exposure. For details, refer to the Canon website. Depth-of-field previewing is canceled when you press the shutter button halfway.
Page 300: Optical Viewfinder Simulation
Optical Viewfinder Simulation Natural-looking viewfinder and screen display, resembling the view from an optical viewfinder, is available in still photo shooting. Note that images displayed with this feature set to [On] may differ from actual shooting results. Select [ : OVF sim. view assist]. Select an option.
Page 301 Note Not available when the camera is set to shoot multiple exposures.
Page 302: Shooting Information Display
Shooting Information Display Customizing Information on the Screen Customizing Information in the Viewfinder Viewfinder Vertical Display Grid Histogram Lens Information Display Vertical Exposure Level Indicator Flicker Detection Display Clearing Settings You can customize the details and screens of information shown on the screen or in the viewfinder when you shoot.
Page 303 Select [Screen info. settings]. Select screens. Turn the < > dial to select screens of information to show on the camera. For information you prefer not to display, press < > to clear the checkmark [ ]. To edit the screen, press the < >...
Page 304 Edit the screen. Turn the < > dial to select options to show on the screen of information. For items you prefer not to display, press < > to clear the checkmark [ ]. Select [OK] to register the setting.
Page 305 Customizing Information in the Viewfinder Select [ : Shooting info. disp.]. Select [VF info/toggle settings]. Select screens. Turn the < > dial to select information screens to show in the viewfinder. For information you prefer not to display, press < >...
Page 306 Edit the screen. Turn the < > dial to select options to show in the viewfinder. For items you prefer not to display, press < > to clear the checkmark [ ]. Select [OK] to register the setting.
Page 307 Viewfinder Vertical Display You can select how viewfinder information is displayed when you are shooting still photos vertically. Select [ : Shooting info. disp.]. Select [VF vertical display].
Page 308 Select an option. Information is automatically rotated, making it easier to read. Information is not automatically rotated.
Page 309 Grid A grid can be displayed on the screen and viewfinder. Select [ : Shooting info. disp.]. Select [Grid display]. Select an option.
Page 310 Histogram You can select the content and display size of the histogram. Select [ : Shooting info. disp.]. Select [Histogram disp]. Select an option. Select the content ([Brightness] or [RGB]) and display size ([Large] or [Small]).
Page 311 Lens Information Display You can display information about the lens in use. Select [ : Shooting info. disp.]. Select [Lens info display].
Page 312 Select an option. Focus distance disp You can display focus distance when using RF lenses. In focus distance display, you can select the timing and unit of measurement. Focal length disp You can display the focal length of the lens in use. SA variable amount You can display the amount of correction set when using lenses featuring spherical aberration control.
Page 313 Vertical Exposure Level Indicator You can show or hide the vertical exposure level indicator displayed on the right side of the screen. Select [ : Shooting info. disp.]. Select [Vertical exp level]. Select [On] when using metered manual flash with an external flash unit.
Page 314 Flicker Detection Display You can specify whether to show the [ ] icon in shooting information display. Select [ : Shooting info. disp.]. Select [Flicker detect disp]. The [ ] icon is displayed under the following conditions. • With [ : Anti-flicker shoot.] set to [Enable]: The [ ] icon is illuminated when flicker is detected.
Page 315 Clearing Settings Select [ : Shooting info. disp.]. Select [Reset]. Select [OK].
Page 316: Viewfinder Display Format
Viewfinder Display Format You can select how information is presented in the viewfinder. Select [ : VF display format]. Select an option.
Page 317: Display Performance
Display Performance You can select the performance parameter to prioritize in shooting screen display for still photos. Select [ : Disp. performance]. Select an option. When set to [Smooth] By pressing the < > button to add a checkmark, you can include low-light locations in the scenarios for suppressing lower display frame rates.
Page 318 Caution Shooting under low light with [Suppress lower frame rate] set for shooting screen display may affect performance as follows. • Faster battery consumption • Fewer shots available • Lower image display brightness • Difficulty in autofocusing • Lower metering precision •...
Page 319: Metering Mode Selection
Metering Mode Selection You can select one of four methods to measure the subject brightness. Setting with the < > button Press the < > button ( Select the metering mode. Turn the < > dial to make a selection.
Page 320 Setting with the < > button Press the < > button ( With an image displayed, press the < > button. Select the metering mode. To select an item, turn the < > dial or press < > up or down. To select the metering mode, turn the <...
Page 321 Setting via the menu Select [ : Metering mode]. Select the metering mode. Evaluative metering General-purpose metering mode suited even for backlit subjects. The camera adjusts the exposure automatically to suit the scene. Partial metering Effective where there are much brighter lights around the subject due to backlight, etc. Spot metering Effective when metering a specific part of the subject.
Page 322 Center-weighted average The metering across the screen is averaged, with the center of the screen weighted more heavily. Note By default, the camera will set the exposure as follows. With [ ], holding down the shutter button halfway locks the exposure value (AE lock) after the camera focuses with One-Shot AF.
Page 323: Manual Exposure Compensation
Manual Exposure Compensation Exposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exposure set by the camera. Exposure compensation is available in [ ], [ ], [ ], [ ], and [ ] modes. For details on exposure compensation when [ ] mode and ISO Auto are both set, see Manual Exposure, and see...
Page 324 Note The exposure compensation amount will remain in effect even after you set the power switch to < >.
Page 325: Exposure Lock (Ae Lock)
Exposure Lock (AE Lock) AE Lock Effects You can lock the exposure when you want to set the focus and exposure separately or when you will take multiple shots at the same exposure setting. Press the < > button to lock the exposure, then recompose and take the picture.
Page 326 Recompose and take the picture. When you are to take more pictures while maintaining the AE lock, keep holding down the < > button and press the shutter button to take another picture. Note AE lock is not possible with bulb exposures. AE Lock Effects AF Point Selection Metering Mode...
Page 327: General Still Photo Shooting
General Still Photo Shooting Information Display General Still Photo Shooting Precautions Information Display For details on the icons displayed for still photo shooting, see Information Display. Note White display of the [ ] icon indicates that your shots will be about as bright as the image displayed.
Page 328 General Still Photo Shooting Precautions Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. Image quality When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable.
Page 329 Images and display Under low- or bright-light conditions, the displayed image may not reflect the brightness of the captured image. Although noise may be noticeable in images under low light (even at low ISO speeds), there will be less noise in your shots, due to differences in image quality between displayed and captured images.
Page 330: Movie Recording
High Frame Rate • Movie Recording Format • Movie Cropping • Sound Recording • HDR Movie Recording • Canon Log Settings • Movie Self-Timer • Image Stabilizer (IS Mode) • Shutter Button Function for Movies • Zebra Settings • Time Code •...
Page 331: Tab Menus: Movie Recording
Tab Menus: Movie Recording Shooting 1 Movie rec. size High Frame Rate Movie rec. format Movie cropping Sound recording Shooting 2 Exposure comp. ISO speed settings HDR shooting HDR Movie Recording Auto Lighting Optimizer Highlight tone priority...
Page 332 Shooting 3 HF anti-flicker shooting Av 1/8-stop incr. Auto slow shutter Shooting 4 White balance Set Custom WB WB correction (4) Picture Style Picture Style Selection Picture Style Customization Picture Style Registration Canon Log settings Clarity...
Page 333 Shooting 5 Lens aberration correction High ISO speed NR Shooting 6 Movie self-timer Remote control...
Page 334 Shooting 7 IS (Image Stabilizer) mode Customize Quick Controls Shutter btn function for movies Metering timer Zebra settings Shooting info. disp. VF display format Shooting 8 Auto pwr off temp. Standby: Low res. HDMI display Time code...
Page 335: Movie Recording
Movie Recording Autoexposure Recording Shutter-Priority AE Aperture-Priority AE ISO Speed in [ ] / [ ] / [ ] Mode Manual Exposure Recording ISO Speed in [ ] Mode Shutter Speed Still Photo Shooting Information Display (Movie Recording)
Page 336 Autoexposure Recording Exposure is controlled automatically to suit the brightness. Set the recording mode to [ Press the < > button, then turn the < > dial to select [ Focus on the subject. Before recording a movie, focus with AF ( ) or manual focus ( By default, [ : Movie Servo AF] is set to [Enable] so that the...
Page 337 Record the movie. Press the movie shooting button to start recording a movie. You can also start recording a movie by tapping [ ] on the screen. While the movie is being recorded, the [ REC] icon (1) will be displayed in the upper right of the screen.
Page 338 Shutter-Priority AE ] recording mode enables you to set your preferred shutter speed for movies. ISO speed and aperture values are set automatically to suit the brightness and obtain standard exposure. Set the recording mode to [ Press the < >...
Page 339 Focus and record the movie. Same as steps 2 and 3 for Autoexposure Recording. Caution Avoid adjusting shutter speed while recording movies, which will record changes in exposure. When recording a movie of a moving subject, a shutter speed of approx. 1/25 sec. to 1/125 sec.
Page 340 Aperture-Priority AE ] recording mode enables you to set your preferred aperture value for movies. ISO speed and shutter speed are set automatically to suit the brightness and obtain standard exposure. Set the recording mode to [ Press the < >...
Page 341 Focus and record the movie. Same as steps 2 and 3 for Autoexposure Recording. Caution Avoid adjusting the aperture value while recording movies, which will record changes in exposure caused by aperture adjustment. Note Notes for [ ], [ ], and [ ] modes You can lock the exposure (AE lock) by pressing the <...
Page 342 ISO Speed in [ ] / [ ] / [ ] Mode ISO speed is set automatically. See ISO Speed in Movie Recording.
Page 343 Manual Exposure Recording You can manually set the shutter speed, aperture value, and ISO speed for movie recording. Set the recording mode to [ Press the < > button, then turn the < > dial to select [...
Page 344 Set the shutter speed, aperture value, and ISO speed. Press the shutter button halfway and check the exposure level indicator. Turn the < > dial to set the shutter speed (1), the < > dial to set the aperture value (2), and the < >...
Page 345 Focus and record the movie. Same as steps 2 and 3 for Autoexposure Recording. Caution ISO speed cannot be expanded to L (equivalent to ISO 50) in movie recording. During movie recording, avoid changing the shutter speed, aperture value, or ISO speed, which may record changes in the exposure or create more noise at high ISO speeds.
Page 346 ISO Speed in [ ] Mode You can set the ISO speed manually or select [ ] to set it automatically. For details on ISO speed, see ISO Speed in Movie Recording.
Page 347 Shutter Speed Available shutter speeds in [ ] and [ ] mode vary depending on the frame rate of your specified movie recording quality. Shutter Speed (Sec.) Frame Rate High Frame Rate Movie Normal Movie Recording HDR Movie Recording Recording 1/4000–1/125 –...
Page 348 Still Photo Shooting Still photo shooting is not supported in movie recording mode. To shoot still photos, stop recording and change the [Shooting mode] setting to still photos first.
Page 349 Information Display (Movie Recording) For details on the icons on the movie recording screen, see Information Display.
Page 350: Movie Recording Size
Movie Recording Size 4K Movie Recording Image Area Cards That Can Record Movies Movie Files Exceeding 4 GB Total Movie Recording Time and File Size Per Minute You can set the recording size, frame rate, and compression method in [ : Movie rec.
Page 351 Note To obtain better performance with the card, formatting the card with the camera before recording movies is recommended ( Movies cannot be recorded in HD or VGA quality. 4K Movie Recording Recording 4K movies requires a stable card with a fast writing speed. For details, see Cards That Can Record Movies.
Page 352 Image Area The movie image area varies depending on factors such as movie recording quality and cropped shooting settings and the lens used. RF or EF lenses: With [ : Movie cropping] set to [Disable] (4096×2160) (3840×2160) / (1920×1080) RF or EF lenses: With [ : Movie cropping] set to [Enable] EF-S lenses (4096×2160)
Page 353 Frame rate (fps: frames per second) ] 119.9 fps/[ ] 59.94 fps/[ ] 29.97 fps For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.). For [ ], see High Frame Rate. ] 100.00 fps/[ ] 50.00 fps/[ ] 25.00 fps For areas where the TV system is PAL (Europe, Russia, China, Australia, etc.).
Page 354 Cards That Can Record Movies For details on CFexpress cards that can record at each level of movie recording quality, check the Canon website. Card performance requirements for details on SD cards. Test cards by recording a few movies to make sure they can record correctly at your...
Page 355 Movie Files Exceeding 4 GB Using SD/SDHC cards formatted with the camera If you use the camera to format an SD/SDHC card, the camera will format it in FAT32. With a FAT32-formatted card, if you record a movie and the file size exceeds 4 GB, a new movie file will be created automatically.
Page 356 Total Movie Recording Time and File Size Per Minute For details, see Movie recording.
Page 357: High Frame Rate
High Frame Rate You can record movies at a high frame rate of 119.9 fps or 100.0 fps. This is ideal for recording movies that will be played back in slow motion. The maximum recording time per movie is 89 min. 29 sec. Movies are recorded in quality.
Page 358: Movie Recording Format
Movie Recording Format You can specify the format of movie files recorded. For RAW+MP4 recording, select [ ] in the [ Rec options] setting of [ : Record func+card/folder sel.]. Select [ : Movie rec. format]. Select an option.
Page 359 RAW movies recorded by this camera. Commercially available software may not be able to display RAW movies recorded by this camera. For compatibility information, contact the software manufacturer. To prioritize gradation in highlights, set [Canon Log] in [ : Canon Log settings] to [On (...
Page 360: Movie Cropping
Movie Cropping With RF or EF lenses, movies can be cropped around the center of the image, as if using a telephoto lens. Recording movies with EF-S lenses has the same effect as this movie cropping feature. Select [ : Movie cropping]. Select [Enable].
Page 361: Sound Recording
Sound Recording Sound Recording/Sound-Recording Level Wind Filter Attenuator You can record movies while recording sound with either the built-in microphone or an external one. You can also freely adjust the sound-recording level. Use [ : Sound recording] to set sound recording functions. Caution Sounds from Wi-Fi operations may be captured with built-in or external microphones.
Page 362 Note Audio is also output when the camera is connected to televisions via HDMI, except when [Sound recording] is set to [Disable]. In case of feedback from television audio output, move the camera away from the television or turn down the volume. The volume balance between L/R (left/right) cannot be adjusted.
Page 363 Wind Filter Set to [Enable] to reduce wind noise when there is wind outdoors. Only activated when the camera's built-in microphone is used. When the wind filter function takes effect, part of the low bass sounds will also be reduced.
Page 364 Attenuator Automatically suppresses sound distortion caused by loud noises. Even if [Sound recording] is set to [Auto] or [Manual] for recording, sound distortion may still result if there is a very loud sound. In this case, setting it to [Enable] is recommended. Microphone Any connected external microphone is used instead of the built-in microphone.
Page 365: Hdr Movie Recording
HDR Movie Recording You can record high dynamic range movies that retain detail in highlights of high-contrast scenes. Note Available when the recording size is set to (NTSC) or (PAL). Select [ HDR Movie Recording]. Select [Enable]. Record an HDR movie. Record the movie in the same way as normal movie recording.
Page 366 : IS (Image Stabilizer) mode] set to Digital IS], or when set to [ : Highlight tone priority], [ : Canon Log settings], or [ : HDR shooting Since multiple frames are merged to create an HDR movie, certain parts of the movie may look distorted.
Page 367: Canon Log Settings
To work with Canon Log movies in postproduction, you can apply look-up tables (LUTs). LUT data can be downloaded from the Canon website. Select [ : Canon Log settings].
Page 368 Select [On ( )] ( Set the options as desired. [View Assist.], [Characteristics], and [Color space].
Page 369 Canon Log Enables 10-bit recording of Canon Log movies to the card. Movies can also be recorded to an external device that supports 10-bit recording. Note YCbCr 4:2:2 (10-bit) color sampling and the BT.709/BT.2020/Cinema Gamut color space are used in Canon Log recording.
Page 370 When played on the camera, these movies may look darker and have lower contrast than movies recorded with a Picture Style applied, due to Canon Log image characteristics, which are intended to ensure a wide dynamic range. For clearer display that makes it easier to check details, set [View Assist.] to [On].
Page 371 Characteristics Adjust as needed. Select an option ([Sharpness: Strength], [Saturation], or [Hue]), adjust the effect level, then press < >. Sharpness: Strength 0: Weak outline emphasis 7: Strong outline emphasis Saturation −4: Low +4: High Reds −4: Toward magenta +4: Toward yellow Hue* Greens -4: Toward yellow...
Page 372 Manually setting the ISO speed to 100–640 will make the dynamic range narrower. Canon Log offers a dynamic range of approx. 1600% at ISO 800 or higher. The following are expanded ISO speeds: ISO 100, 125, 160, 200, 250, 320, 400, 500...
Page 373 In particular, noise may become more noticeable if you enhance the contrast when color-grading your movies. With Canon Log, skies, white walls, and similar subjects may be affected by noise or uneven gradation, exposure, or colors. Horizontal banding is more likely to occur when recording somewhat dark, flat subjects.
Page 374: Movie Self-Timer
Movie Self-Timer Movie recording can be started by the self-timer. Select [ : Movie self-timer]. Select an option. Record the movie. After you press the movie shooting button or tap [ ], the camera beeps and displays the number of seconds left before recording. Note To cancel the self-timer, either tap the screen or press <...
Page 375: Image Stabilizer (Is Mode)
Image Stabilizer (IS Mode) Movie Digital IS The camera's IS mode and movie digital IS features reduce camera shake as movies are recorded. They can provide effective stabilization even when non-IS lenses are used. The [IS mode] menu item is not shown when IS-equipped lenses are used. In that case, setting the lens Image Stabilizer switch to <...
Page 376 Movie Digital IS Select [ : IS (Image Stabilizer) mode]. Select a [ Digital IS] option. Off ( Image stabilization with Movie digital IS is disabled. On ( Camera shake will be corrected. The image will be slightly magnified. Enhanced ( Compared to when [On] is set, stronger camera shake can be corrected.
Page 377 With some lenses, even more effective stabilization (indicated by “+” next to the IS icon) is possible when the lens's IS is used in conjunction with [IS mode] and [Movie digital IS] on the camera. For details on lenses compatible with this feature, visit the Canon website.
Page 378: Shutter Button Function For Movies
Shutter Button Function for Movies You can set the functions performed by pressing the shutter button halfway or completely during movie recording. Caution In movie recording, the [Shutter btn function for movies] setting overrides any function assigned to the shutter button in [ : Customize buttons].
Page 379 Select an option. Half-press Specify the function performed by pressing the shutter button halfway. Fully-press Specify the function performed by pressing the shutter button completely. With [Fully-press] set to [Start/stop mov rec], you can start/stop movie recording not only with the movie shooting button but also by pressing the shutter button completely, or by using Remote Switch RS-80N3 (sold separately).
Page 380: Zebra Settings
Zebra Settings To help you adjust exposure before or during movie recording, you can display a striped pattern over or around image areas of a specified brightness. Select [ : Zebra settings]. Select [Zebra]. Select [On].
Page 381 Select [Zebra pattern]. [Zebra 1]: Displays left-slanting stripes around areas of the specified brightness. [Zebra 2]: Displays right-slanting stripes over areas that exceed the specified brightness. [Zebra 1+2]: Displays both [Zebra 1] and [Zebra 2]. [Zebra 1] display takes precedence where [Zebra 1] and [Zebra 2] display areas overlap.
Page 382 : Highlight tone priority] and [ : Picture Style] settings. The maximum brightness value does not reach 100% when Canon Log or an expanded ISO speed is set. Checking the zebra display level in advance is recommended when you will set...
Page 383: Time Code
Time Code Count Up Start Time Setting Movie Recording Count Movie Play Count HDMI Drop Frame Time codes record the time automatically as movies are recorded. Time codes always record elapsed hours, minutes, seconds, and frames. They are mainly used when movies are edited.
Page 384 Count Up Rec run The time code advances only during movie recording. Time codes in each movie file recorded continue from the last time code in the previous file. Free run The time code keeps advancing, even when you are not recording. Caution When set to [Free run], time codes are not added to High Frame Rate movies that you record.
Page 385 Start Time Setting You can set the initial time of the time code. Manual input setting Enables you to set any starting hour, minute, second, and frame. Reset Resets the time set with [Manual input setting] or [Set to camera time] to “00:00:00.” or “00:00:00:”...
Page 386 Movie Recording Count You can select how time is displayed on the movie recording screen. Rec time During recording standby, displays the available recording time. During recording, displays the time that has elapsed since movie recording began (1). Time code Displays the time code during movie recording (2).
Page 387 Movie Play Count You can select how time is displayed on the movie playback screen. Rec time Displays the recording or playback time during movie playback. Time code Displays the time code during movie playback. Note Time codes are always recorded to movie files (except when High Frame Rate movies are set to [Free run]), regardless of the [Movie rec count] setting.
Page 388 HDMI Time code Time codes can be added to movies as you record them to an external device via HDMI. • Off No time code is added to HDMI video output. • On Time codes are added to HDMI video output. When [On] is set, [Rec Command] is displayed.
Page 389 Drop Frame The time code's frame count will cause a discrepancy between the actual time and the time code if the frame rate is set to (119.9 fps), (59.94 fps), or (29.97 fps). The discrepancy is corrected automatically when [Enable] is set. Enable Corrects the discrepancy automatically by skipping time code numbers (DF: drop frame).
Page 390: Other Menu Functions
Other Menu Functions Exposure comp. Exposure compensation can be adjusted in a range of ±3 stops, in 1/3-stop increments. For details on exposure compensation, see Manual Exposure Compensation. ISO speed settings • ISO speed In [ ] mode, you can set the ISO speed manually. You can also select ISO Auto. •...
Page 391 Auto Lighting Optimizer Brightness and contrast can be corrected automatically. For details on Auto Lighting Optimizer, see Auto Lighting Optimizer. Highlight tone priority You can reduce overexposed, clipped highlights as you record movies. For details on Highlight tone priority, see Highlight Tone Priority.
Page 392 HF anti-flicker shooting For details on HF anti-flicker shooting, see High-Frequency Anti-Flicker Shooting. Av 1/8-stop incr. You can set aperture values on a finer scale when recording movies with an RF lens. Select [Enable] to change the aperture increment in [ ] or [ ] mode from 1/3 stop (or 1/2 stop) to 1/8 stop.
Page 393 Note Setting to [Disable] is recommended when recording moving subjects under low light, or when afterimages such as trails may occur.
Page 394 White balance For details on white balance, see White Balance. Set Custom WB For details on registering custom white balances, see Custom White Balance. WB correction For details on white balance correction, see White Balance Correction. Picture Style For details on Picture Styles, see Picture Style Selection.
Page 395 Lens aberration correction Peripheral illumination, distortion, chromatic aberration, and diffraction can be corrected as you record movies. For details on lens aberration correction, see Lens Aberration Correction. High ISO speed NR For details on High ISO speed noise reduction, see High ISO Speed Noise Reduction.
Page 396 Remote control By setting to [Enable], you can start or stop movie recording using Wireless Remote Control BR-E1 (sold separately).
Page 397 Customize Quick Controls For details on customizing Quick Controls, see Customizing Quick Controls. Metering timer For details on the metering timer, see Metering Timer. Shooting info. disp. For details on configuring shooting information display, see Shooting Information Display. VF display format For details on the viewfinder display format, see Viewfinder Display Format.
Page 398 Auto pwr off temp. Set to [High] to reduce the frequency of the camera automatically turning off due to high card temperature. Standby: Low res. Set to [On] to conserve battery power and control the rise of camera temperature during standby.
Page 399 HDMI display You can specify how movies are displayed as they are recorded via HDMI to an external device. Movie output itself corresponds to the [Movie rec. size] setting. The default setting is [ • Enables movie display both on the camera screen and on the other device, via HDMI output.
Page 400 Caution HDMI output without information prevents display of warnings about the card space, battery level, or high internal temperature ( ) via HDMI. During HDMI output, display of the next image may take some time if you switch between movies of different recording qualities or frame rates. Avoid operating the camera when recording movies to external devices, which may cause information to be displayed in the HDMI video output.
Page 401: General Movie Recording Precautions
General Movie Recording Precautions Caution Precautions for movie recording Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. If you record something that has fine detail, moire or false colors may result.
Page 402 Movies are recorded almost exactly as they appear on the screen (except with [ : Canon Log settings] set to [View Assist.]). Video and audio quality of recorded movies may be worse on other devices, and...
Page 403 If you use a card with a slow writing speed, an indicator may appear on the right of the screen during movie recording. The indicator shows how much data has not yet been written to the card (remaining capacity of the internal buffer memory), and it increases more quickly the slower the card is.
Page 404: Af/Drive
AF/Drive This chapter describes autofocus operation and drive modes and introduces menu settings on the AF [ ] tab. Note < > stands for autofocus. < > stands for manual focus. • Tab Menus: AF (Still Photos) • Tab Menus: AF (Movie Recording) •...
Page 405: Tab Menus: Af (Still Photos)
Tab Menus: AF (Still Photos) AF operation AF area Subject tracking Subject to detect Eye detection Switching tracked subjects Note When lenses without a focus mode switch are used, [Focus mode] is displayed on the [ 1] tab.
Page 406 Case 1 Case 2 Case 3 Case 4 Case A Tracking sensitivity Accel./decel. tracking One-Shot AF release prior. Preview AF Lens drive when AF impossible AF-assist beam firing...
Page 407 Limit AF areas AF area selection control sensitivity- AF pt select Orientation linked AF point MF peaking settings Focus guide...
Page 408 Electronic full-time MF Lens electronic MF Focus/control ring Focus ring rotation RF lens MF focus ring sensitivity...
Page 409: Tab Menus: Af (Movie Recording)
Tab Menus: AF (Movie Recording) Movie Servo AF AF area Subject tracking Subject to detect Eye detection Switching tracked subjects Note When lenses without a focus mode switch are used, [Focus mode] is displayed on the [ 1] tab. Movie Servo AF speed Movie Servo AF track sens.
Page 410 Lens drive when AF impossible Limit AF areas AF area selection control sensitivity- AF pt select MF peaking settings Focus guide...
Page 411 Electronic full-time MF Lens electronic MF Focus/control ring Focus ring rotation RF lens MF focus ring sensitivity...
Page 412: Af Operation
AF Operation One-Shot AF for Still Subjects Servo AF for Moving Subjects You can select the AF operation characteristics to suit the shooting conditions or subject. Set the lens's focus mode switch to < >. Select [ : AF operation]. Select an option.
Page 413 Note If focus is not achieved, the AF point will turn orange. With One-Shot AF, shooting is not possible even by pressing the shutter button completely. Recompose the shot and try to focus again. Or, see Shooting Conditions That Make Focusing Difficult.
Page 414 One-Shot AF for Still Subjects This AF operation is suited for still subjects. When you press the shutter button halfway, the camera will focus only once. When focus is achieved, the AF point will turn green and the beeper will sound. The focus remains locked while you hold down the shutter button halfway, allowing you to recompose the image before taking the picture.
Page 415 Servo AF for Moving Subjects This AF operation is suited for moving subjects. While you hold down the shutter button halfway, the camera will keep focusing on the subject continuously. When focus is achieved, the AF point will turn blue. The beeper will not sound even when focus is achieved.
Page 416: Movie Servo Af
Movie Servo AF With this function enabled, the camera focuses on the subject continuously during movie recording. Set the still photo shooting/movie recording switch to < >. Select [ : Movie Servo AF].
Page 417 Select [Enable]. Enable • The camera focuses on the subject continuously even when you are not pressing the shutter button halfway. • To keep the focus at a specific position, or if you prefer not to record mechanical sounds from the lens, you can temporarily stop Movie Servo AF by tapping [ ] in the lower left of the screen.
Page 418 Caution Precautions when set to [Movie Servo AF: Enable] Shooting conditions that make focusing difficult • A fast-moving subject approaching or moving away from the camera. • A subject moving at a close distance to the camera. • When shooting with a higher aperture value. •...
Page 419: Selecting The Af Area
Selecting the AF Area AF Area Selecting the AF Area Subject Tracking Subject to Detect Eye Detection Switching Tracked Subjects Tracking with the < > Button Manually Setting AF Points or Zone AF Frames Registering AF Points (Home Position) Magnified View AF Shooting Tips Shooting Conditions That Make Focusing Difficult AF Range...
Page 420 AF Area This section describes AF area operation with [ : Subject tracking] set to [Off]. : Spot AF The camera focuses in a narrower area than 1-point AF. : 1-point AF The camera focuses using a single AF point [...
Page 421 : Expand AF area: Focuses using one AF point [ ] and the AF area outlined here in blue. Effective for moving subjects, which are difficult to track with 1-point AF. Focusing on your preferred subject is easier than with Flexible Zone AF. When Servo AF is used, first you will focus using an AF point [ : Expand AF area: Around Focuses using one AF point [...
Page 422 : Flexible Zone AF 1 (default) With Flexible Zone AF 1, you can freely set the size of the Zone AF frame [ Uses auto selection AF in Zone AF frames to cover a larger area than Expand AF area, which makes focusing easier than with 1-point AF/Expand AF area and effective for moving subjects.
Page 423 : Flexible Zone AF 3 With Flexible Zone AF 3, you can freely set the size of the Zone AF frame [ Uses auto selection AF in Zone AF frames to cover a larger area than Expand AF area, which makes focusing easier than with 1-point AF/Expand AF area and effective for moving subjects.
Page 424 Selecting the AF Area You can select the AF area to suit the shooting conditions or subject. If you prefer to focus manually, see Manual Focus. Select [ : AF area]. Select the AF area. The screen above is displayed when [ : Orientation linked AF point] ( ) is set to [Separate AF pts: Area+pt].
Page 425 Note To set the AF area, you can also press the < > button and then the < > button. The following descriptions apply to the camera with AF operation set to [Servo AF] ). Once a subject is in focus with [One-Shot AF] ( ), the AF point turns green.
Page 426 Subject Tracking Among the subjects detected, a tracking frame [ ] is displayed over the main subject. If the subject moves, the tracking frame [ ] also moves to track it. You can set [ : Eye detection] to [Enable] to shoot with the subject's eyes in focus ( Select [ : Subject tracking].
Page 427 Manually selecting a subject for focus Check the tracking frame. A tracking frame [ ] appears over detected subjects. Unless the tracking frame [ ] overlaps an AF point, it is displayed in gray. Once the tracked subject is behind or inside an AF point, the tracking frame turns white (distinguishing it as an active frame), enabling selection as the main subject.
Page 428 Focus and shoot/record. Once you press the shutter button halfway and the subject is in focus, the AF point turns blue. An orange AF point indicates that the camera could not focus on subjects. Subjects are tracked across the entire screen as you press the shutter button halfway or completely.
Page 429 Note Selecting a subject manually after pressing the < > button changes the tracking frame to [ ] and locks on to that subject for tracking across the entire screen regardless of the specified AF area. Selecting a subject by touch with [ : AF area] set to [Whole area AF] changes the tracking frame to [ ] and locks on to that subject for tracking across the entire...
Page 430 Subject to Detect You can specify conditions for automatic selection of the main subject to track. People Prioritizes the faces or heads of people as the main subjects to track. When a person's face or head cannot be detected, the camera attempts to detect and track their torso.
Page 431 Caution The camera may detect areas other than faces or bodies of people or animals or key details or bodies of vehicles as subjects. Faces that are very small or large in the picture, too bright or dark, or partly hidden cannot be detected.
Page 432 Eye Detection You can shoot with the eyes of people or animals in focus. Select [ : Eye detection]. Select an option.
Page 433 Aim the camera at the subject. A tracking frame is displayed around their eye. To choose an eye to focus on when [ : AF area] is set to [Whole area AF], press the < > button to change the tracking frame to ], then use <...
Page 434 Switching Tracked Subjects You can specify how easily the camera switches AF points to track subjects. Initial priority Tracks the subject initially determined for AF, to the extent possible. On subject Tracks the subject initially determined for AF, to the extent possible. Switches to other subjects if the camera can no longer determine if the tracked subject is the main subject.
Page 435 Tracking with the < > Button You can press the < > button to track subjects with a tracking frame [ Check the AF point. The AF point (1) will appear. With Expand AF area: or Expand AF area: Around, adjacent AF points are also displayed.
Page 436 Press the < > button. The AF point changes to a tracking frame [ ], which locks on to that subject for tracking and follows the subject within the screen if it moves. To cancel tracking, press the < > button again. The tracking frame changes to [ ] when multiple subjects can be detected, and you can use <...
Page 437 Manually Setting AF Points or Zone AF Frames You can manually set the AF point or Zone AF frame. Here, Flexible Zone AF 1 screens are used as an example. Check the AF point. The AF point (1) will appear. With Expand AF area: or Expand AF area: Around, adjacent AF points are also displayed.
Page 438 Move the AF point. Press the < > button, use < > to move the AF point into position for focusing, then press < > (but note that with some lenses, it may not move to the edge of the screen). To center the AF point while using <...
Page 439 Focus and take the picture. Aim the AF point over the subject and press the shutter button halfway. When focus is achieved, the AF point turns blue. If focus is not achieved, the AF point will turn orange. Caution The camera will keep moving the AF point [ ] to track subjects when set to Flexible Zone AF and Servo AF, but under some shooting conditions (such as when subjects are small), it may not be possible to track the subject.
Page 440 Registering AF Points (Home Position) You can register the position of a frequently used AF point. For instant switching from the current AF point to your registered AF point, you can use a button you assign to recalling the home position on advanced setting screens for [Direct AF point selection], [Metering and AF start], [Switch to registered AF point], or [Register/recall shooting func] in [ Customize buttons] ( Select your preferred AF area.
Page 441 Note To clear registered AF points, hold down the < > button and press the < > button, or press and hold the < > button. You can also clear registered AF points by clearing all camera settings. You can register separate home positions for each camera orientation when the orientation-linked AF point setting ( ) is set to [Separate AF pts: Area+pt] or [Separate AF pts: Pt only].
Page 442 Magnified View To check the focus, you can magnify display by approx. 5× or 10× by pressing the < > button (or tapping [ Magnification is centered on the AF point for [Spot AF], [1-point AF], [Expand AF area: ], and [Expand AF area: Around], or on the Zone AF frame for Flexible Zone AF. Autofocusing is performed in magnified view if you press the shutter button halfway.
Page 443 AF Shooting Tips Even when focus is achieved, pressing the shutter button halfway will focus again. Image brightness may change before and after autofocusing. Depending on the subject and shooting conditions, it may take longer to focus, or the continuous shooting speed may decrease. If the light source changes as you shoot, the screen may flicker, and focusing may be difficult.
Page 444 Shooting Conditions That Make Focusing Difficult Subject with low-contrast such as the blue sky, solid-color flat surfaces or when highlight or shadow details are clipped. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Subjects with repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.).
Page 445 AF Range The available autofocus range varies depending on the lens, aspect ratio, and image quality used, and whether you are shooting 4K movies or using features such as Movie cropping or Movie digital IS.
Page 446: Manual Focus
Manual Focus Setting MF peaking (Outline Emphasis) Focus Guide If focusing is not possible with autofocus, you can magnify the image and focus manually. Set the lens's focus mode switch to < >. Turn the lens focusing ring to set the approximate focus. For lenses without a focus mode switch, set [ : Focus mode] to Magnify the image.
Page 447 Move the magnified area. Use < > to move the magnified area into position for focusing. To center the magnified area, press < > straight in. Focus manually. While looking at the magnified image, turn the lens focusing ring to focus.
Page 448 Setting MF peaking (Outline Emphasis) Edges of subjects in focus can be displayed in color to make focusing easier. You can set the outline color and adjust the sensitivity (level) of edge detection. Select [ : MF peaking settings]. Select [Peaking]. Select [On].
Page 449 If necessary, lower the ISO speed or set [Peaking] to [Off]. Note Peaking display shown on the screen is not recorded in images. MF peaking may be hard to discern when Canon Log is set. If necessary, set [View Assist.] to [On].
Page 450 Focus Guide Setting [ : Focus guide] to [On] provides a guide frame that shows which direction to adjust focus and the extent of adjustment needed to focus on the person. You can also use eye control to display the focus guide at your preferred position. For details, see Using Eye Control for Select [...
Page 451 The guide frame indicates the current position in focus and adjustment amount as follows. Toward infinity Much adjustment needed Toward infinity Slight adjustment needed In focus Toward close range Slight adjustment needed Toward close range Much adjustment needed...
Page 452 Adjustment information not detected Caution Under difficult shooting conditions for AF ( ), the guide frame may not be displayed correctly. Higher aperture values are more likely to prevent correct guide frame display. No AF points are displayed while the guide frame is displayed. The guide frame is not displayed in these situations.
Page 453: Servo Af Characteristics
Servo AF Characteristics Case Details Case 1: Versatile Multi-Purpose Setting Case 2: Continue to Track Subjects, Ignoring Possible Obstacles Case 3: Instantly Focus on Subjects Suddenly Entering AF Points Case 4: For Subjects That Accelerate or Decelerate Quickly Case A: Tracking Automatically Adapts to Subject Movement Parameters Adjusting Case Parameters Shooting with Servo AF can be easily tailored to your subjects or shooting situations by...
Page 454 Case Details Case 1 to Case A are five combinations of settings for “Tracking sensitivity” and “Acceleration/deceleration tracking.” Referring to the following table, select the case for your subject and shooting situation. Examples of Shooting Case Icon Description Situations Case 1 Versatile multi purpose setting Moving subjects in general Continue to track subjects,...
Page 455 Case 1: Versatile Multi-Purpose Setting Default • Tracking sensitivity: 0 • Accel./decel. tracking: 0 Standard setting suited to moving subjects in general. Suitable for many kinds of subjects and scenes. In the following situations, select [Case 2] to [Case 4] instead: non-subjects moving across AF points, elusive subjects, or subjects that suddenly appear or change speed.
Page 456 Case 2: Continue to Track Subjects, Ignoring Possible Obstacles Default • Tracking sensitivity: Locked on: –1 • Accel./decel. tracking: 0 Setting to continue focusing on the subject even if non-subjects move across AF points, or if the subject strays from AF points. Effective if you prefer the focus not to switch to non- subjects or the background.
Page 457 Case 3: Instantly Focus on Subjects Suddenly Entering AF Points Default • Tracking sensitivity: Responsive: +1 • Accel./decel. tracking: +1 Setting to focus on a series of subjects at different distances in the AF points, one after another. Focus switches to any new subject that appears in front of the target subject. Also effective when you want to always focus on the closest subject.
Page 458 Case 4: For Subjects That Accelerate or Decelerate Quickly Default • Tracking sensitivity: Responsive: 0 • Accel./decel. tracking: +1 Setting to keep tracking and focusing on subjects even if they suddenly change speed. Effective for subjects having sudden movements, sudden acceleration/deceleration, or sudden stops.
Page 459 Case A: Tracking Automatically Adapts to Subject Movement Useful when you prefer to shoot with parameters set automatically, based on how subjects change. Tracking sensitivity and acceleration/deceleration tracking are set automatically.
Page 460 Parameters Tracking sensitivity Setting for Servo AF subject-tracking sensitivity in response to non-subjects moving across AF points or subjects straying from AF points. Standard setting. Suitable for moving subjects in general. Locked on: –2 / Locked on: –1 The camera will try to continue focusing on the subject even if non-subjects move across AF points or if the subject strays from the AF points.
Page 461 Acceleration/deceleration tracking Setting for subject-tracking sensitivity in response to sudden, significant changes in speed, as when subjects suddenly start or stop moving. Suited for subjects that move at a steady speed (minor changes in moving speed). –2 / –1 Suited for subjects that move at a steady speed (minor changes in moving speed). Effective when a setting of 0 makes focus unstable, due to slight subject movement or an obstruction in front of the subject.
Page 462 Adjusting Case Parameters You can manually adjust the parameters ((1) Tracking sensitivity and (2) Acceleration/ deceleration tracking) for Case 1 to Case 4. Select a case. Turn the < > dial to select the number of a case to adjust. Press the <...
Page 463 Make the adjustment. Default settings are indicated by a light gray [ ] icon. To confirm the adjustment, press < >. To return to the screen in step 1, press the < > button. Note To restore default parameter settings for (1) and (2) to each case, press the <...
Page 464: Customizing Af Functions
Customizing AF Functions 2] (In Movie Recording) You can configure AF functions in detail to suit your shooting style or subject. One-Shot AF release priority You can specify whether to prioritize focus or release timing for One-Shot AF (except when shooting with Touch Shutter).
Page 465 [ ] Release Prioritizes shutter release over focus. Useful when capturing the decisive moment is most important. Note that the camera shoots whether or not the subject is in focus. Preview AF This function keeps subjects generally in focus. The camera is ready to focus immediately when you press the shutter button halfway.
Page 466 Lens operation when AF is not available You can specify lens operation that applies when autofocusing on a subject is not possible. ] Continue focus search If focus cannot be achieved with autofocus, the lens is driven to search for the precise focus.
Page 467 Select an option. [ON] Enable Enables firing of the AF-assist beam, when needed. [OFF] Disable Disables firing of the AF-assist beam. Set if you prefer not to fire the AF-assist beam. [LED] LED AF assist beam only Enables LED AF-assist beam firing by Speedlites equipped with this feature, when these flash units are attached.
Page 468 Limit AF areas You can limit the AF areas available to the areas that you normally use. Select available AF areas and press < > to add a checkmark [ ]. Select [OK] to register the setting. For details on AF areas, see Area.
Page 469 AF area selection control You can set how AF area selection methods are switched. →M-Fn button Press the < > button, then the < > button. Each press switches the AF area. →Main Dial Press the < > button, then turn the < >...
Page 470 Orientation-linked AF points You can set separate types of AF areas or positions of AF points for vertical and horizontal shooting. ] Same for both vert/horiz The same AF points or Zone AF frames in the same AF areas are used in both vertical and horizontal shooting.
Page 471 Electronic full-time MF Operation of manual focus adjustment using the electronic focusing ring when certain lenses are attached is customizable. Check the Canon website for compatible lenses. Disable Operation of manual focus adjustment corresponds to the [Lens electronic MF] setting.
Page 472 ] One-Shot→enabled (magnify) You can manually adjust the focus after the AF operation if you keep holding down the shutter button halfway. You can magnify the area in focus and adjust the focus manually by turning the lens focusing ring. ] Disable in AF mode Manual focus adjustment is disabled when the lens's focus mode switch is set to <...
Page 473 Focusing ring rotation You can reverse the direction that the focusing ring of RF lens is rotated to adjust settings. ] Normal ] Reverse direction Focusing ring sensitivity of RF lenses You can set the sensitivity of the RF lens focusing ring. ] Varies with rotation speed Focusing ring sensitivity varies depending on rotation speed.
Page 474 Use as a focusing or control ring Menu-based switching of lens focus/control ring functionality. Caution Available when using lenses that have a combination focusing ring/control ring but have no switch to switch between these feature. Use as focus ring The ring works as a focusing ring. Use as control ring The ring works as a control ring.
Page 475 * Lenses supporting slow focus transition during movie recording USM and STM lenses released in and after 2009 are compatible. For details, refer to the Canon website. Caution With certain lenses, even if you adjust the AF speed, the speed may not change.
Page 476 Note Operation when inactive is equivalent to when [AF speed] is set to [Standard (0)]. An asterisk “*” to the right of [ : Movie Servo AF speed] indicates that the default setting has been modified. Movie Servo AF tracking sensitivity You can adjust the tracking sensitivity (to one of seven levels), which affects responsiveness if the subject strays from the AF point during Movie Servo AF, as when interfering objects move across AF points or when you pan.
Page 477: Selecting The Drive Mode
Selecting the Drive Mode Single and continuous drive modes are provided. You can select the drive mode suiting the scene or subject. Press the < > button ( Select the drive mode. Turn the < > dial to make a selection. ] Single shooting When you hold down the shutter button completely, only one shot will be taken.
Page 478 • Zooming is performed • Manual focusing is performed • Servo AF changes the position in focus Visit the Canon website for details on lenses supporting the maximum continuous shooting speed. Continuous shooting speed with Servo AF may be slower depending on subject conditions or the lens used.
Page 479: Using The Self-Timer
Using the Self-Timer Use the self-timer when you want to be in the picture such as a commemorative photograph. Press the < > button ( Select the self-timer. Turn the < > dial to make a selection. : Shoot in 10 sec. : Shoot in 2 sec.
Page 480 Take the picture. Focus on the subject, then press the shutter button completely. To check operation, look at the self-timer lamp, listen for beeps, or watch the countdown in seconds on the screen. Self-timer lamp blinking accelerates and the camera beeps quickly approx.
Page 481: Remote Control Shooting
Remote Control Shooting Wireless Remote Control BR-E1 Remote Switch RS-80N3 / Timer Remote Controller TC-80N3 For remote control shooting, you can use an optional Wireless Remote Control BR-E1 (Bluetooth) or an optional Remote Switch RS-80N3 or Timer Remote Controller TC-80N3 (both wired).
Page 482 Remote Switch RS-80N3 / Timer Remote Controller TC-80N3 Once connected to the camera, the switch enables you to shoot remotely over a wired connection. For operating instructions, refer to the accessory instruction manual. Open the terminal cover. Connect the plug to the remote control terminal.
Page 483: Playback
Playback This chapter covers topics related to playback—playing back captured still photos and movies—and introduces menu settings on the playback [ ] tab. Caution Normal display or selection on this camera may not be possible for images captured on other cameras, or images from this camera that have been edited or renamed on a computer.
Page 484 • Browsing Images with the Rate+Quick Control Dial 1 • Switching the Main Dial and Quick Control Dial 2 • Rate/Voice Memo Button Function • Customizing Playback Information Display • Displaying the Highlight Alert • AF Point Display • Playback Grid •...
Page 485: Tab Menus: Playback
Tab Menus: Playback Playback 1 Protect images Erase images Rotate stills Change mov rotate info Rating Image copy Print order Playback 2 RAW image processing Resize Cropping HEIF→JPEG conversion...
Page 486 Playback 3 Slide show Set image search conditions Magnification Playback 4 Image jump w/ Image jump w/ Switch button function Memo audio quality...
Page 487 Playback 5 Playback information display Highlight alert AF point disp. Playback grid Movie play count HDMI HDR output...
Page 488: Image Playback
Image Playback Single-Image Display Shooting Information Display Touch Playback Single-Image Display Switch to playback. Press the < > button. The last image captured or played back is displayed. Browse images. To play back images starting with your most recent shot, turn the <...
Page 489 No information Basic information display Shooting information display Exit image playback. Press the < > button to exit image playback and return to shooting standby. Note Lines indicating the image area are shown on RAW images captured with [ Cropping/aspect ratio] set to [1:1 (aspect ratio)], [4:3 (aspect ratio)], or [16:9 (aspect ratio)] ( If the search conditions are set with [ : Set image search conditions] (...
Page 490 Shooting Information Display With the shooting information screen displayed ( ), you can press < > up or down to view other information. You can also customize the information displayed, in [ : Playback information display] (...
Page 491 Touch Playback The camera features a touch-screen panel that you can touch to control playback. Supported touch operations are like those used with smartphones and similar devices. First, press the < > button to prepare for touch playback. Browse images Jump display Index display...
Page 492 Magnified view Note You can also magnify display by double-tapping with one finger.
Page 493: Magnified Image Display
Magnified Image Display Setting the Initial Magnification Ratio Setting the Initial Magnification Position Magnification for Subsequent Images You can magnify display of your captured images. Magnify the image. Magnification is possible at these times: 1. During image playback (single-image display), 2. During image review after shooting, and 3. When the camera is ready to shoot.
Page 494 Scroll the image. Use < > to scroll around the magnified image. With < >, you can also move the magnified area itself. Press the < > or < > button to exit magnified view. Note To switch to other images while maintaining magnified view, turn the < >...
Page 495 Setting the Initial Magnification Ratio You can set the initial magnification ratio. Select [ : Magnification]. Select [Magnificatn (apx)].
Page 496 Select an option. 2x, 4x, 8x, 10x Magnified view starts at the selected magnification ratio. Actual size The recorded image's pixels will be displayed at approx. 100%. Same as last Magnified view resumes from the same ratio as the last time you exited magnified view with the <...
Page 497 Setting the Initial Magnification Position You can set the initial magnification position. Select [ : Magnification]. Select [Magnified position].
Page 498 Select an option. From center Magnified view starts from the center of the screen. From focus pt Magnified view starts from the AF point in focus. If the photo is taken with manual focus, the magnified view starts from the center of the screen.
Page 499 Magnification for Subsequent Images You can specify whether to maintain the same position for magnified view or use to the position set in [Magnified position] when displaying subsequent images. Select [ : Magnification]. Select [Maintain position].
Page 500 Select an option. Enable The current magnified position is maintained when displaying subsequent images in magnified view. Disable The position set in [Magnified position] is used when displaying subsequent images in magnified view.
Page 501: Index Display (Multiple-Image Display)
Index Display (Multiple-Image Display) Press the < > button. During image playback, press the < > button. ] will be displayed in the lower right of the screen. Switch to the index display. Turn the < > dial counterclockwise. The 4-image index display will appear. The selected image is highlighted with an orange frame.
Page 503 Browse images. Use < > or the < > dial to move the orange frame for image selection. Press < > in the index display to display the selected image in the single-image display.
Page 504: Voice Memo Recording And Playback
Voice Memo Recording and Playback Recording Voice Memos Memo Audio Quality Playing Voice Memos You can add (record) voice memos to your shots. Voice memos are recorded as WAV audio files with the same file number as the image. They can be played back by the camera or a computer.
Page 505 Record a voice memo. Hold down the < > button for approx. 2 sec. Keep holding down the button after [Recording memo...] appears, and speak into the microphone (1). Each recording can be up to approx. 30 sec. To end the voice memo, release the button. ] icon is displayed at the top of the screen.
Page 506 Caution Voice memos cannot be added to movies or protected images. Voice memos cannot be recorded with an external microphone. Voice memos cannot be added to images during transfer to an FTP server. Note Audio quality of voice memo recording can be changed in [ : Memo audio quality].
Page 507 Memo Audio Quality You can set the audio quality for recording voice memos. Select [ : Memo audio quality]. Select an option. 48 kHz: High quality (48 kHz) Enables voice memo recording at the same level of audio quality as movies.
Page 508 Playing Voice Memos Select [ button function]. Select [ / ]. Select an image for voice memo playback. Press the < > button to switch to image playback. Turn the < > dial to select an image labeled with a [ ] icon at the top of the screen.
Page 509 Play back the voice memo. Press the < > button to play back the voice memo through the speaker (1). You can adjust the sound volume by turning the < > dial. Press the < > button to stop playback. Note Multiple voice memos added to an image are played back consecutively.
Page 510: Movie Playback
Movie Playback Switch to playback. Press the < > button. Select a movie. Turn the < > dial to select a movie to play. In single-image display, the [ ] icon displayed in the upper left of the screen indicates a movie. In index display, perforations at the left edge of a thumbnail indicate a movie.
Page 511 In the single-image display, press < >. Press < > to play back the movie. The movie will start playing back. Sound is played through the speaker (1). You can pause playback and display the movie playback panel by pressing < >.
Page 512 Movie playback panel Item Playback Operations Playback Pressing < > toggles between playback and stop. Adjust the slow motion speed by turning the < > dial. The slow Slow motion motion speed is indicated in the upper right of the screen. Skips backward approx.
Page 513: Editing A Movie&Apos;S First And Last Scenes
Editing a Movie's First and Last Scenes You can edit out the first and last scenes of a movie in approx. 1-sec. increments. In single-image display, press < >. On the movie playback panel, select [...
Page 514 Specify the part to be edited out. Select either [ ] (Cut beginning) or [ ] (Cut end). Press < > left or right to go back or forward one frame. Keep pressing the Multi-controller to fast rewind or fast forward frames. Each turn of the <...
Page 515 Compress and save is not available for the following movies. • Movies recorded with [ : HDR shooting ] set to [Enable] • Movies recorded with [ : Canon Log settings] set to [On ( • Movies recorded in (NTSC), (PAL), (NTSC), or sizes Movies may not be compressed when the remaining batter capacity is low.
Page 516: 4K Movie Frame Grab
4K Movie Frame Grab From 4K movies, you can select individual frames to save as JPEG or HEIF still images. This function is called “Frame Grab.” Select a 4K movie. Turn the < > dial to select a 4K quality movie. On the shooting information screen ( ), 4K movies are labeled with ] and [...
Page 517 Frame grabbing is not possible from the following 4K movies. • RAW movies • Movies recorded with [ : Canon Log settings] set to [On ( • Movies recorded with other cameras Frame grabbing is not possible while the camera is connected to a computer.
Page 518: Playback On A Tv Set
Playback on a TV Set By connecting the camera to a television with a commercially available HDMI cable, you can play back the captured still photos and movies on the television. If the image does not appear on the TV screen, confirm that [ : Video system] is correctly set to [For NTSC] or [For PAL] (depending on the video system of your television).
Page 519 Press the < > button. Images are now displayed on the television, with nothing displayed on the camera screen. The images will automatically be displayed at the optimum resolution matching the connected television. Caution Adjust movie sound volume with the television. The sound volume cannot be adjusted with the camera.
Page 520: Protecting Images
Protecting Images Protecting Individual Images via the Menu Specifying the Range of Images to Protect Protecting All Images in a Folder or on a Card You can protect important images from being accidentally erased. Caution If you format the card ( ), the protected images will also be erased.
Page 521 Select [Select images]. Select the image to protect. Turn the < > dial to select an image to protect. Protect the image. Press < > to protect the selected image, after which it will be labeled with a [ ] icon (1) at the top of the screen. To cancel protection and clear the [ ] icon, press <...
Page 522 Specifying the Range of Images to Protect While looking at the images in the index display, you can specify the first and last images for a range to protect all the specified images at once. Select [Select range]. Select [Select range] in [ : Protect images].
Page 523 Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [ : Protect images], all the images in the folder or on the card will be protected.
Page 524: Erasing Images
Erasing Images Erasing Images Individually Selecting ([ ]) Multiple Images to Erase Together Specifying the Range of Images to Erase Erasing All Images in a Folder or on a Card You can either select and erase unnecessary images individually or erase them in one batch.
Page 525 Erase the images. JPEG/HEIF/RAW images or movies Select [Erase]. RAW+JPEG/RAW+HEIF images Select an option. Series of images captured in [ ], [ ], or [ ] drive mode are erased when you select [Erase scene including image] during playback. Note During playback, you can erase images by pressing the <...
Page 526 Selecting ([ ]) Multiple Images to Erase Together By adding checkmarks to the images to be erased, you can erase all those images at once. Select [ : Erase images]. Select [Select and erase images]. Select an image. Turn the < >...
Page 527 Erase the images. Press the < > button, then press [OK].
Page 528 Specifying the Range of Images to Erase While looking at the images in the index display, you can specify the first and last images for a range to erase all the specified images at once. Select [Select range]. Select [Select range] in [ : Erase images].
Page 529 Erase the images. Select [OK].
Page 530 Erasing All Images in a Folder or on a Card You can erase all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [ : Erase images], all the images in the folder or on the card will be erased.
Page 531: Rotating Still Photos
Rotating Still Photos You can use this feature to rotate the displayed image to the desired orientation. Select [ : Rotate stills]. Select an image to rotate. Turn the < > dial to select the image. Rotate the image. Each time you press < >, the image will rotate clockwise as follows: 90°→270°→0°.
Page 532 Note If you set [ : Auto rotate] to [On ) before taking pictures, you need not rotate the image with this function. If the rotated image is not displayed in the rotated orientation during image playback, set [ : Auto rotate] to [On Movies cannot be rotated.
Page 533: Changing Movie Orientation Information
Changing Movie Orientation Information You can manually edit movie playback orientation information (which determines which side is up). Select [ : Change mov rotate info]. Select a movie. Turn the < > dial to select a movie with orientation information to change.
Page 534 Change the orientation information. As you watch the camera and icon in the upper left of the screen, press < > to specify which side is up. Each press of < > edits the movie rotation information as follows: [ ] →...
Page 535: Rating Images
Rating Images Rating Individual Images With the < > Button Rating Individual Images via the Menu Rating by Specifying the Range Rating All Images in a Folder or on a Card You can rate images on a scale of 1–5 ( ).
Page 536 Note During playback, you can rate images by pressing the < > button (...
Page 537 Rating Individual Images via the Menu Select [ : Rating]. Select [Select images]. Select the image to be rated. Turn the < > dial to select the image to be rated.
Page 538 Rate the image. Press < >, and a blue highlight frame will appear as shown in the screen shown above. Turn the < > dial to select a rating mark, then press < >. When you append a rating mark to the image, the number beside the set rating will increase by one.
Page 539 Rating by Specifying the Range While looking at the images in the index display, you can specify the first and last images for a range to rate all the specified images at once. Select [Select range]. Select [Select range] in [ : Rating].
Page 540 Rate the images. Turn the < > dial to select a rating mark, then select [OK]. All the images in the specified range will be rated (same rating) at once.
Page 541 Rating All Images in a Folder or on a Card You can rate all the images in a folder or on a card at once. Under [ : Rating], when you select [All images in folder] or [All images on card], all the images in the folder or on the card will be rated.
Page 542 Note Values next to ratings are displayed as [###] if more than 1,000 images have that rating. With [ : Set image search conditions] and [ : Image jump w/ ], you can display only the images given a specific rating.
Page 543: Copying Images
Copying Images Copying Individual Images Copying a Range of Images Copying All Images in a Folder or on a Card You can copy the images on one card to the other card to save duplicates. All images in a folder or on a card can also be copied at the same time. Caution For extensive copying, consider using a household power outlet accessory (sold separately).
Page 544 Copying Individual Images Select [ : Image copy]. Select [Sel.Image]. Check the source and target card numbers and the free space on the target card. Select [Sel.Image], then press < >.
Page 545 Select the folder. (1) Number of images in folder (2) Lowest file number (3) Folder name (4) Highest file number Select the source folder, then press < >. When selecting the folder, refer to the images displayed at right of the screen.
Page 546 Press the < > button. Select [OK]. Check the target card, then select [OK]. Select the target folder. Select the folder to copy the image to, then press < >. To create a new folder, select [Create folder].
Page 547 Select [OK]. Check the information about the source and target card, then select [OK]. Results are displayed after copying is finished. Select [OK] to return to the screen in step 2.
Page 548 Copying a Range of Images You can copy all specified images at once by selecting the first and last images in a range as you look at images in the index display. Select [Range]. Select the folder. Select the source folder, then press < >.
Page 549 Specify the range of images. Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images. To select another image to copy, repeat step 3. Press the <...
Page 550 Copying All Images in a Folder or on a Card You can copy all the images in a folder or on a card at once. Selecting [Sel. ] or [All images] in [ : Image copy] copies all the images it contains.
Page 551: Print Ordering (Dpof)
Print Ordering (DPOF) Print Options Selecting Images for Printing DPOF (Digital Print Order Format) enables you to print images recorded on the card according to your printing instructions such as the image selection, quantity to print, etc. You can print multiple images in one batch or create a print order for a photofinisher. You can set the print settings such as print type, date imprinting, file number imprinting, etc.
Page 552 Set the options as desired. Set [Print type], [Date], and [File No.] options. Standard Prints one image on one sheet. Multiple thumbnail images are printed Index Print type on one sheet. Prints both the standard and index Both prints. [On] imprints the recorded date of the captured Date image.
Page 553 Caution If you print an image with a large image size using the [Index] or [Both] setting ), the index print may not be printed with certain printers. In this case, resize the image ( ), then print the index print. Even if [Date] and [File No.] are set to [On], the date or file number may not be imprinted, depending on the print type setting and printer.
Page 554 Selecting Images for Printing Selecting images Select and specify the images individually. Press the < > button to save the print order to the card. Standard/Both (1) Quantity (2) Total images selected Press < > to print a copy of the displayed image. By turning the < >...
Page 555 Selecting multiple images Select range Select [Select range] in [Multiple]. Selecting the first and last images of the range marks all the images in the range with a checkmark [ ], and one copy of each image will be specified for printing. All images in a folder Select [Mark all in folder] and select the folder.
Page 556: Raw Image Processing
RAW Image Processing Magnified View Processing Images with Specified Aspect Ratios RAW Image Processing Options You can process images with the camera to create JPEG or HEIF images. RAW images are not affected, so different conditions can be applied to create JPEG or HEIF images.
Page 557 Select an option, then select images. You can select multiple images to process at once. Select images Turn the < > dial to select images to process, then press < >. Press the < > button. Select range Select the first image (start point). Next, select the last image (end point).
Page 558 Set the desired processing conditions. Use shot settings Images are processed using image settings at the time of capture. Images captured with [ : HDR shooting ] set to [Enable] are processed to create HEIFs, and images captured with this function set to [Disable] are processed to create JPEGs.
Page 559 Save. When using [Set up processing→JPEG] or [Set up processing→ HEIF], select [ ] (Save). Read the message and select [OK]. To process other images, select [Yes] and repeat steps 2–4. Select the image to display. Select [Original image] or [Processed img.]. Your selected image is displayed.
Page 560 Magnified View You can magnify images displayed for [Set up processing→JPEG] or [Set up processing →HEIF] by pressing the < > button. The magnification ratio varies depending on the [Image quality] setting. With < >, you can scroll around the magnified image. To cancel the magnified view, press the <...
Page 561 Processing Images with Specified Aspect Ratios JPEG or HEIF images at the specified aspect ratio are created when you process RAW images shot with [ Cropping/aspect ratio] ( ) set to [1:1 (aspect ratio)], [4:3 (aspect ratio)], or [16:9 (aspect ratio)].
Page 562 RAW Image Processing Options : Brightness adjustment You can adjust the image brightness up to ±1 stop in 1/3-stop increments. : White balance ( You can select the white balance. Selecting [ ] enables you to select [Auto: Ambience priority] or [Auto: White priority]. If you select [ ], you can set the color temperature.
Page 563 : Image quality ( You can set the image quality when creating a JPEG or HEIF image. : Color space ( You can select either sRGB or Adobe RGB. Since the camera screen is not compatible with Adobe RGB, the difference in the image will hardly be perceptible when either color space is set.
Page 564 • : Diffraction correction ( The diffraction by the lens aperture degrading the image sharpness can be corrected. If [Enable] is set, the corrected image will be displayed. If the effect is difficult to discern, magnify the image ( Caution Processing RAW images in the camera will not produce exactly the same results as processing RAW images with Digital Photo Professional (EOS software).
Page 565: Resizing Jpeg/Heif Images
Resizing JPEG/HEIF Images You can resize a JPEG or HEIF image to reduce the pixel count and save it as a new image. Resizing is available for , , or JPEGs or HEIFs (sizes except ), including those captured in RAW+JPEG and RAW+HEIF shooting. images and RAW images or movies cannot be resized.
Page 566 Select the desired image size. Press < > to display the image sizes. Select the desired image size (1). Save. Select [OK] to save the resized image. Check the destination folder and image file number, then select [OK]. To resize another image, repeat steps 2 to 4.
Page 567: Cropping Jpeg/Heif Images
Cropping JPEG/HEIF Images You can crop a captured JPEG/HEIF image and save it as a new image. Cropping is available for JPEG or HEIF images. RAW images and frame-grab images from 4K movies cannot be cropped. Select [ : Cropping]. Select an image.
Page 568 Set the cropping frame. The image area within the cropping frame will be cropped. Resizing the cropping frame size Turn the < > dial to resize the cropping frame size. The smaller the cropping frame, the more magnified the cropped image will look. Changing the cropping frame aspect ratio and orientation Turn the <...
Page 569 Save. Press < > and select [OK] to save the cropped image. Check the destination folder and image file number, then select [OK]. To crop another image, repeat steps 2 to 5. Caution The position and size of the cropping frame may change depending on the angle set for tilt correction.
Page 570: Converting Heif To Jpeg
Converting HEIF to JPEG You can convert HEIF images captured in HDR shooting and save them as JPEG images. Select [ : HEIF→JPEG conversion]. Select an image. Turn the < > dial to select an HEIF image to convert to JPEG. Press <...
Page 571 Save. Select [OK] to save the JPEG image. • Check the destination folder and image file number, then select [OK]. • To convert another image, repeat steps 2 and 3. Note Some scenes may look different after conversion if the original and converted images are compared.
Page 572: Slide Show
Slide Show You can play back the images on the card as an automatic slide show. Specify the images to be played back. To play back all the images on the card, go to step 2. If you want to specify the images to be played back in the slide show, filter the images with [ : Set image search conditions] ( Select [...
Page 573 Set the playback as desired. Select [Set up]. Set the [Display time] and [Repeat] (repeated playback) settings for the still photos. After completing the settings, press the < > button. Display time Repeat...
Page 574 Start the slide show. Select [Start]. After [Loading image...] is displayed, the slide show will start. Exit the slide show. To exit the slide show and return to the setting screen, press the < > button. Note To pause the slide show, press < >.
Page 575: Setting Image Search Conditions
Setting Image Search Conditions Clearing the Search Conditions You can filter image display according to your search conditions. After setting the image search conditions, you can play back and display only the found images. You can also protect, rate, play a slide show, erase, and apply other operations to filtered images. Select [ : Set image search conditions].
Page 576 Set the search conditions. Turn the < > dial to select an option. Turn the < > dial to set the option. A checkmark [ ] (1) is appended to the left of the option. (Specified as the search condition.) If you select the option and press the <...
Page 577 Display the found images. Press the < > button. Only the images that match the set conditions (filtered) will be played back. When the images are filtered for display, the screen will have an outer yellow frame (2). Caution If no images match the search conditions, < >...
Page 578: Browsing Images With The Main Dial
Browsing Images with the Main Dial In single-image display, you can turn the < > dial to jump through the images forward or backward according to the jump method set. Select [ : Image jump w/ Select the jump method. Note With [Jump images by the specified number], you can turn the <...
Page 579 Browse by jumping. (1) Jump method (2) Playback position Press the < > button. In single-image display, turn the < > dial. You can browse by the jump method set.
Page 580: Browsing Images With The Rate+Quick Control Dial 1
Browsing Images with the Rate+Quick Control Dial 1 In single-image display, you can turn the < > dial while holding down the < > button to jump through the images forward or backward according to the jump method set. Select [ : Image jump w/ Select the jump method.
Page 581 Browse by jumping. (1) Jump method (2) Playback position Press the < > button. In single-image display, turn the < > dial while holding down the < > button. You can browse by the jump method set.
Page 582: Switching The Main Dial And Quick Control Dial 2
Switching the Main Dial and Quick Control Dial 2 You can switch the functions assigned to these dials, as used on the image playback screen. Select [ : Switch Select an option. Disable Image jump Magnify/Index view Enable Magnify/Index view Image jump Note Corresponding icons in menus and on screens such as the Quick Control and...
Page 583: Rate/Voice Memo Button Function
Rate/Voice Memo Button Function You can assign image rating/protection/erasure, voice memo recording/playback, or image browsing in conjunction with the < > dial to the < > button. Select [ button function]. Select an option. / : Rating / Hold to record voice memo Assigns rating to the <...
Page 584 : Record voice memo / Rating disabled Assigns voice memo recording to the < > button. During image playback, you can start recording a voice memo by pressing the < > button. / : Play voice memo / Hold to record voice memo Assigns voice memo playback to the <...
Page 585: Customizing Playback Information Display
Customizing Playback Information Display Histogram You can specify screens and accompanying information displayed during image playback. Select [ : Playback information display]. Add a checkmark [ ] next to the number of screens to display. Select numbers with the < >...
Page 586 Histogram The histograms show signal levels across the tonal range. Brightness display (for checking the general exposure level and overall gradation) and RGB display (for checking saturation and gradation of red, green, and blue) are available. You can switch the histogram displayed by pressing the <...
Page 587 [Brightness] display This histogram is a graph showing the distribution of the image's brightness level, with the horizontal axis indicating the brightness level (darker on the left and brighter on the right) and the vertical axis indicating the pixel count at each brightness level. The more pixels there are toward the left, the darker the image, and the more pixels there are toward the right, the brighter the image.
Page 588 [RGB] display This histogram is a graph showing the distribution of each primary color's brightness level in the image (RGB or red, green, and blue), with the horizontal axis indicating the color's brightness level (darker on the left and brighter on the right) and the vertical axis indicating the pixel count at each color brightness level.
Page 589: Displaying The Highlight Alert
Displaying the Highlight Alert You can specify blinking display of overexposed highlights on the playback screen. To obtain more detailed gradation in the blinking areas where you want the gradation to be faithfully reproduced, set the exposure compensation to a negative amount and shoot again for a better result.
Page 590: Af Point Display
AF Point Display You can display the AF points that were used to focus, which will be outlined in red on the playback screen. Select [ : AF point disp.]. Select [Enable].
Page 591: Playback Grid
Playback Grid You can display a grid over still photos shown in single-image display on the playback screen. This function is convenient for checking the image's vertical or horizontal tilt as well as composition. Select [ : Playback grid]. Select an option.
Page 592: Movie Play Count
Movie Play Count You can select how time is displayed on the movie playback screen. Select [ : Movie play count].
Page 593 Select an option. Rec time Displays the recording or playback time during movie playback. Time code Displays the time code during movie playback. Note Time codes are always recorded to movie files (except when High Frame Rate movies are set to [Free run]), regardless of the [Movie rec count] setting. The [Movie play count] setting in [ : Time code] is linked to the [ : Movie...
Page 594: Hdmi Hdr Output
HDMI HDR Output You can view RAW or HEIF images in HDR by connecting the camera to an HDR TV. Select [ : HDMI HDR output]. Select [On]. Note Make sure the HDR TV is set up for HDR input. For details on how to switch inputs on the TV, refer to the TV manual.
Page 595: Communication Functions
Caution Important Note that Canon cannot be held liable for any loss or damage caused by erroneous network settings when using the camera. In addition, Canon cannot be held liable for any other loss or damage caused by use of the camera.
Page 596: Tab Menus: Communication Functions Tab
Tab Menus: Communication Functions Tab Network settings Airplane mode (3) Bluetooth settings • Smartphone • Remote Nickname GPS settings Image transfer Reset communication settings Caution Wi-Fi connections are not possible while the camera is connected to a computer or other device via an interface cable. Other devices, such as computers, cannot be used with the camera by connecting them with an interface cable while the camera is connected to devices via Wi-Fi.
Page 597: Available Communication Functions
FTP transfer settings. Syncing time between cameras ( The time on multiple EOS R3 cameras can be synchronized over a wired LAN connection. GPS ( Built-in GPS features can be used to geotag images, log routes traveled with the camera,...
Page 598 Available communication functions and connection methods (besides GPS) Connection Method Available Features Wi-Fi Wired LAN (Built-In) Camera Connect communication from smartphones ○ Using EOS Utility ○ ○ Image transfer to FTP servers ○ ○ Using Browser Remote ○ Syncing time between cameras ○...
Page 599: Camera Connect Communication From Smartphones
Camera Connect Communication from Smartphones Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Camera Connect Functions Canceling the Pairing Wi-Fi Connection Without Using Bluetooth Automatic Image Transfer as You Shoot Sending Images to a Smartphone from the Camera Settings to Make Images Viewable from Smartphones General Precautions on Camera Connect Communication from Smartphones By using the dedicated Camera Connect app installed on a smartphone or tablet (collectively referred to hereafter as “smartphones”), you can connect the smartphone and...
Page 600 Note You can also access Google Play or App Store from QR codes displayed when you pair the smartphone and camera. For the operating system versions supported by Camera Connect, refer to the download site of Camera Connect. Sample screens and other details in this guide may not match the actual user interface elements after camera firmware updates or updates to Camera Connect, Android, or iOS.
Page 601 Select [ : Network settings]. In [Network], select [Enable]. Press the < > button and select [ : Bluetooth settings].
Page 602 In [Bluetooth], select [Smartphone]. Select [Pairing]. Select an option. If Camera Connect is already installed, select [Do not display]. If Camera Connect is not installed, select [Android] or [iOS], scan the displayed QR code with the smartphone to access Google Play or App Store and install Camera Connect.
Page 603 Steps on the smartphone (2) Start Camera Connect. Tap the camera for pairing. If you are using an Android smartphone, go to step 11. Tap [Pair] (iOS only).
Page 604 Steps on the camera (2) Select [OK]. Press the < > button. Pairing is now complete, and the camera is connected to the smartphone via Bluetooth. A Bluetooth icon appears on the main Camera Connect screen. Caution Bluetooth connection consumes battery power even after the camera's auto power off is activated.
Page 605 Note When paired via Bluetooth, tap [Bluetooth remote controller] in Camera Connect to control the camera remotely from the smartphone. From an Android device, you can control the camera to send images to the smartphone (...
Page 606 Steps on the smartphone (3) Tap a Camera Connect function. In iOS, tap [Join] when a message is displayed to confirm camera connection. After the devices are connected via Wi-Fi, a screen for the selected function is displayed on the smartphone. The Bluetooth and Wi-Fi icons are now displayed on the main Camera Connect screen, after you return to that screen.
Page 607 Camera Connect Functions Images on camera Images can be browsed, deleted, or rated. Images can be saved on a smartphone. Remote live view shooting Enables remote shooting as you view a live image on the smartphone. Auto transfer Enables camera and app setting adjustment for automatic transfer of your shots ( Bluetooth remote controller Enables remote control of the camera from a smartphone paired via Bluetooth.
Page 608 Canceling the Pairing Cancel pairing with a smartphone as follows. Select [Check/clear connection info]. Press the < > button. Select [OK]. Clear the camera information on the smartphone. In the smartphone's Bluetooth setting menu, clear the camera information registered on the smartphone.
Page 609 Note To check the camera's Bluetooth address, select [Bluetooth address].
Page 610 Wi-Fi Connection Without Using Bluetooth These instructions describe how to establish a direct Wi-Fi connection with a smartphone and use Camera Connect to control the camera. Steps on the camera (1) On the camera, press the < > button. Select [ : Network settings].
Page 611 Select [SET* Unspecified]. Select [Create with wizard]. Select [Configure online]. Select [OK].
Page 612 Select [Smartphone]. Select [OK]. Press the < > button. Select [OK]. Select [New settings]. Select [OK].
Page 613 Select [Camera access point mode]. Select [Easy connection]. Select [OK]. Select [OK].
Page 614 Press the < > button. Select [New settings]. Select [OK]. Check the SSID (network name) and password. Check the SSID (1) and password (2) displayed on the camera screen.
Page 615 Steps on the smartphone Operate the smartphone to establish a Wi-Fi connection. Activate the smartphone's Wi-Fi function, then tap the SSID (network name) you checked in step 16. In the password field, enter the password you checked in step 16, then tap [Join].
Page 616 Steps on the camera (2) Select [OK]. To specify viewable images, press the < > button. For details on conditions that enable image viewing, see Settings to Make Images Viewable from Smartphones. Press < >.
Page 617 Press < >. The main window of Camera Connect will be displayed on the smartphone. The camera's < > lamp is lit in green. The Wi-Fi connection to a smartphone is now complete. Operate the camera using Camera Connect ( When connected via Wi-Fi, you can send images to a smartphone from the Quick Control screen during playback ( Terminating Wi-Fi connections (...
Page 618 Automatic Image Transfer as You Shoot Your shots can be automatically sent to a smartphone. Before following these steps, make sure the camera and smartphone are connected via Wi-Fi. Select [ : Network settings]. Select [Connection option settings]. Select [Smartphone settings].
Page 619 Select [Send to smartphone after shot]. Set [Auto send] to [Enable]. If necessary, specify [Size to send].
Page 620 Sending Images to a Smartphone from the Camera You can use the camera to send images to a smartphone paired via Bluetooth (Android devices only) or connected via Wi-Fi. If you will send many images, consider using a household power outlet accessory (sold separately).
Page 621 Select sending options and send the images. Sending images individually Select an image to send. Turn the < > dial to select images to send, then press < >. You can press the < > button and turn the < >...
Page 622 Sending multiple selected images Press < >. Select [Send selected].
Page 623 Select images to send. Turn the < > dial to select images to send, then press < >. To switch to three-image display for image selection, press the < > button and turn the < > dial counterclockwise. To return to the single-image display, press the <...
Page 624 Select [Size to send]. On the displayed screen, select an image size. Select [Send].
Page 625 Sending a specified range of images Press < >. Select [Send range]. Specify the range of images. Select the first image (start point). Select the last image (end point). To cancel the selection, repeat this step. To change the number of images in index display, press the < >...
Page 626 Confirm the range. Press the < > button. Select [Size to send]. On the displayed screen, select an image size. Select [Send].
Page 627 Sending all images on the card Press < >. Select [Send all card]. Select [Size to send]. On the displayed screen, select an image size.
Page 628 Select [Send]. Sending images that match the search conditions Send all the images that match the search conditions set in [ : Set image search conditions] at once. For details on [Set image search conditions], see Setting Image Search Conditions. Press <...
Page 629 Select [Size to send]. On the displayed screen, select an image size. Select [Send]. Ending image transfer ( Caution During the image transfer operation, a picture cannot be taken even if the camera's shutter button is pressed.
Page 630 Note You can cancel the image transfer by selecting [Cancel] during the transfer. You can select up to 999 files at a time. With a Wi-Fi connection established, disabling the smartphone's power saving function is recommended. Selecting the reduced size for still photos applies to all still photos sent at that time. Note that size still photos are not reduced.
Page 631 Settings to Make Images Viewable from Smartphones Images can be specified after the Wi-Fi connection is terminated. Select [ : Network settings]. Select [Manual setting]. Select [Function settings].
Page 632 Select [Smartphone]. Select [Change]. Select [Viewable imgs].
Page 633 Select an option. Select [OK] to access the setting screen. [All images] All images stored on the card become viewable. [Images from past days] Specify viewable images on the shooting-date basis. Images shot up to nine days ago can be specified. When [Images shot in past days] is selected, images shot up to the specified number of days before the current date become viewable.
Page 634 [Select by rating] Specify viewable images depending on whether a rating is appended (or not appended) or by the type of rating. Once you select the type of rating, the viewable images are set. [File number range] (Select range) Select the first and last images from images arranged by the file number to specify the viewable images.
Page 635 General Precautions on Camera Connect Communication from Smartphones Caution If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur. • If the still photo shooting/movie recording switch is set to < >, movie recording will continue.
Page 636: Wi-Fi Connections With A Computer Using Eos Utility
Wi-Fi Connections with a Computer Using EOS Utility Connecting to a Computer via Wi-Fi Using EOS Utility, you can browse images on the camera and save them to the computer. Also in EOS Utility, you can shoot by controlling the camera remotely and change camera settings.
Page 637 In [Network], select [Enable]. Select [Connection settings]. Select [SET* Unspecified].
Page 638 Select [Create with wizard]. Select [Configure online]. Select [OK]. Select [EOS Utility]. Select [OK].
Page 639 Select [Wi-Fi]. Select [OK]. Select [New settings]. Select [OK]. Select [Connect with WPS].
Page 640 Select [WPS (PBC mode)]. Select [OK]. Steps on the access point Connect to the access point via Wi-Fi. Press the access point's WPS button. Steps on the camera (2) Select [OK].
Page 641 Select [Auto setting]. Select [OK]. Select [Disable]. Select [OK]. Press < >.
Page 642 Select [New settings]. Select [OK]. For details on subsequent operations, see Configuring EOS Utility Connection Settings. Terminating Wi-Fi connections ( Reconnecting (...
Page 643: Basic Communication Settings
Basic Communication Settings Preparation Displaying the Connection Wizard Checking the Type of Access Point Connecting via WPS (PBC Mode) Connecting via WPS (PIN Mode) Connecting Manually to Detected Networks Connecting Manually by Specifying Networks Connecting in Infrastructure Mode Connecting in Camera Access Point Mode Setting the IP Address Configuring Communication Function Settings Before using the following camera communication functions, configure camera and...
Page 644 Preparing to use communication functions EOS Utility A computer with EOS Utility (EOS software) installed is required. For EOS Utility installation instructions, visit the Canon website. FTP transfer A computer running one of the following OSes is required. The computer must also be set up in advance to function as an FTP server.
Page 645 Preparing to connect via Wi-Fi Connect the computer for the Wi-Fi connection to the access point in advance. Caution Transferring movies Each movie file is large, and transferring large files over Wi-Fi may take some time. Referring to Communication Function Precautions, arrange your network environment for stable communication between devices and the access point.
Page 646 Displaying the Connection Wizard This section describes the process of following the connection wizard instructions to add connection settings. If an error is displayed, see Troubleshooting and check the settings. Be careful not to press the shutter button or other controls (which will close the connection wizard) until configuration is complete.
Page 647 Select [Connection settings]. Select [SET*]. Select [Create with wizard]. Selecting [Create from list] when multiple communication and function settings are registered on the camera enables you to combine registered settings to add new connection settings. You can also add new connection settings by using connection settings saved to a card.
Page 648 Select a setting method. Select an option and then [OK] to go to the next screen. Select [Configure online] to configure connection settings and then join the network. Select [Configure offline] if you only wish to configure [FTP trans.] and [Browser Remote] connection settings. Select a communication function.
Page 649 Select an option. The options displayed vary depending on the [Select communication function] setting. Select [OK]. Select [New settings]. Select [OK]. By selecting [Select from list] when communication settings are already registered on the camera, you can apply the registered settings.
Page 650 [Configure online] options If you selected [Wired] in step 9, configure the setting as follows. Select an option, then select [OK]. For details on IP address settings, see Setting the IP Address. Select an option, then select [OK]. For details on IPv6 address settings, see Setting the IP Address.
Page 651 [Configure offline] options If you selected [Wired] in step 9, configure the setting as follows. Select an option, then select [OK]. For details on IP address settings, see Setting the IP Address. Select an option, then select [OK]. For details on IPv6 address settings, see Setting the IP Address.
Page 652 Checking the Type of Access Point When connecting via an access point, check whether the access point supports WPS*, which simplifies connections between Wi-Fi devices. If you are unsure about WPS compatibility, refer to the access point user manual or other documentation.
Page 653 Connecting via WPS (PBC Mode) Instructions in this section are continued from Checking the Type of Access Point. This is a connection method used with access points compatible with WPS. In pushbutton connection mode (PBC mode), the camera and access point can be connected simply by pressing the WPS button on the access point.
Page 654 Connect to the access point. Press the access point's WPS button. For details on where the button is and how long to press it, refer to the access point user manual. Select [OK] to initiate connection with the access point. The following screen is displayed once the camera is connected to the access point.
Page 655 Connecting via WPS (PIN Mode) Instructions in this section are continued from Checking the Type of Access Point. This is a connection method used with access points compatible with WPS. In PIN code connection mode (PIN mode), an 8-digit identification number indicated on the camera is entered on the access point to establish a connection.
Page 656 Enter the PIN code. On the access point, enter the 8-digit PIN code displayed on the camera screen. For instructions on entering PIN codes on the access point, refer to the access point's Instruction Manual. After entering the PIN code, select [OK] on the camera. Connect to the access point.
Page 657 Connecting Manually to Detected Networks Instructions in this section are continued from Checking the Type of Access Point. Connect to an access point by selecting its SSID (or ESS-ID) in a list of active access points nearby. Selecting the access point Select an access point.
Page 658 Entering the access point encryption key Enter the encryption key (password) set on the access point. For details on the encryption key that has been set, refer to the access point's user manual. The screens displayed in steps 2–3 vary depending on the authentication and encryption set on the access point.
Page 659 Enter the encryption key. Press < > to access the virtual keyboard ( ), then enter the encryption key. Select [OK] to initiate connection with the access point. The following screen is displayed once the camera is connected to the access point.
Page 660 Connecting Manually by Specifying Networks Instructions in this section are continued from Checking the Type of Access Point. Connect to an access point by entering its SSID (or ESS-ID). Entering the SSID Select [Manual settings]. Enter the SSID (network name). Press <...
Page 661 Setting the access point authentication method Select the authentication method. Select an option and then [OK] to go to the next screen. On the [Encryption settings] screen displayed if [Open system] is selected, select [Disable] or [WEP]. Entering the access point encryption key Enter the encryption key (password) set on the access point.
Page 662 Enter the encryption key. Press < > to access the virtual keyboard ( ), then enter the encryption key. Select [OK] to initiate connection with the access point. The following screen is displayed once the camera is connected to the access point.
Page 663 Connecting in Infrastructure Mode Instructions in this section are continued from Displaying the Connection Wizard. Connect to an access point by entering its SSID (or ESS-ID). Entering the SSID Select [Infrastructure]. Select [OK]. Enter the SSID (network name). Press < >...
Page 664 Setting the access point authentication method Select the authentication method. Select an option and then [OK] to go to the next screen. On the [Encryption settings] screen displayed if [Open system] is selected, select [Disable] or [WEP]. Entering the access point encryption key Enter the encryption key (password) set on the access point.
Page 665 Enter the encryption key. Press < > to access the virtual keyboard ( ), then enter the encryption key. Select [OK] to initiate connection with the access point. The following screen is displayed once the camera is connected to the access point.
Page 666 Connecting in Camera Access Point Mode Instructions in this section are continued from Displaying the Connection Wizard. Camera access point mode is a connection method for directly connecting the camera and other devices via Wi-Fi without using an access point. Two connection methods are available, as follows.
Page 667 Select [Easy connection]. Select [OK]. Select [OK]. The next screen is displayed. Select [OK]. The next screen is displayed.
Page 668 Select [New settings]. Select [OK]. For [Configure online], go to step 6. For [Configure offline], go to step 2 in Configuring Communication Function Settings. By selecting [Select from list] when communication function settings are already registered on the camera, you can apply the registered settings.
Page 669 Computer's screen (sample) Smartphone's screen (sample) Activate Wi-Fi on the other device, then select the SSID (network name) shown on the camera screen. For the password, enter the encryption key (password) shown on the camera screen. Once a connection is established, the settings screen for the communication function is displayed.
Page 670 Connecting with Manual connection Network settings for camera access point mode are configured manually. Set [SSID], [Channel setting], and [Encryption settings] on each screen displayed. Select [Manual connection]. Select [OK]. Enter the SSID (network name). Press < > to access the virtual keyboard ( ), then enter the SSID.
Page 671 Select a channel setting option. To specify the settings manually, select [Manual setting], then turn the < > dial. Select [OK]. Select an encryption setting option. For encryption, select [AES]. Select [OK]. When [AES] is selected, the [Password] screen is displayed. Press <...
Page 672 Select [Auto setting]. Select [OK]. If an error is displayed for [Auto setting], set the IP address manually Select [OK]. The next screen is displayed. Select [OK]. The next screen is displayed.
Page 673 Select [New settings]. Select [OK]. For [Configure online], go to step 9. For [Configure offline], go to step 2 in Configuring Communication Function Settings. By selecting [Select from list] when communication function settings are already registered on the camera, you can apply the registered settings.
Page 674 Computer's screen (sample) Smartphone's screen (sample) Activate Wi-Fi on the other device, then select the SSID (network name) shown on the camera screen. For the password, enter the encryption key (password) shown on the camera screen. Once a connection is established, the settings screen for the communication function is displayed.
Page 675 Setting the IP Address Select a method of setting the IP address, and then set the IP address on the camera. When IPv6 is used, the camera only connects via IPv6. IPv4 connections are disabled. Setting the IP address automatically Set up the IP address settings automatically.
Page 676 Select [OK]. The next screen is displayed. Go to Configuring Communication Function Settings. Setting the IP address manually Set up the IP address settings manually. Note that the items displayed vary depending on the communication function. Select [Manual setting]. Select [OK].
Page 677 Select an option to configure. Select an option to access the screen for numerical input. To use a gateway or DNS address, select [Enable], then select [Address]. Enter the number. Turn the < > dial to switch to other input fields at the top of the screen, and turn the <...
Page 678 Select [OK]. When you have completed setting the necessary items, select [OK]. The next screen is displayed. If you are unsure what to enter, see Checking Network Settings or ask the network administrator or other person in charge of the network. Select an IPv6 option.
Page 679 Select [OK]. The next screen is displayed. Go to Configuring Communication Function Settings.
Page 680 Configuring Communication Function Settings The following instructions are for settings that vary depending on the communication function. Refer to the page that introduces your selected communication function. Select [New settings]. Select [OK] to go to the next screen. By selecting [Select from list] when communication function settings are already registered on the camera, you can apply the registered settings.
Page 681 Complete connection settings for the communication function. FTP transfer ( EOS Utility ( Browser Remote (...
Page 682: Image Transfer To Ftp Servers
Image Transfer to FTP Servers Configuring FTP Server Connection Settings Transferring Images Individually Transferring Multiple Images at Once Adding a Caption Before Transfer Auto Retry If Transfer Fails Viewing Transferred Images By connecting to an FTP server, you can send images on the camera to a computer. With FTP transfer, you can automatically transfer each image to the FTP server as you shoot or transfer a set of images together.
Page 683 Select [Address setting]. The virtual keyboard is displayed if you have specified [Auto setting] for the IP address or [Manual setting] for the DNS address. A screen for numerical input is displayed if you have specified [Disable] for the DNS address. Select [OK] to go to the next screen.
Page 684 Configure the port number. Normally, set [Port number setting] to 00021 (for FTP/FTPS) or 00022 (for SFTP). Select [OK] to go to the next screen. Go to step 6 if you selected [FTP] or [FTPS] in step 1. Go to step 5 if you selected [SFTP].
Page 685 Configure proxy server settings. Not displayed if you selected [FTPS] or [SFTP] in step 1. Select [OK] to go to the next screen. Configure the login method. Not displayed if you selected [SFTP] in step 1. Select [OK] to go to the next screen.
Page 686 Specify a target folder. Select [Root folder] to have images saved in the root folder, as specified in FTP server settings ( Select [Select folder] to specify a target folder in the root folder. If the folder does not exist, it is created automatically. Select [OK] to go to the next screen.
Page 687 Select [OK]. Select [OK]. Display returns to the [Network settings] screen. Connection settings for FTP transfer are now complete. During image transfer, the camera's < > lamp blinks in green.
Page 688 Importing a root certificate for FTPS If you specified [FTPS] FTP mode when configuring connection settings, the root certificate used by the FTP server must be imported to the camera. Only the root certificate with a file name of “ROOT.CER,” “ROOT.CRT,” or “ROOT.PEM” can be imported to the camera.
Page 689 Select [Set root certif]. Select [Load root certif from card]. Select [OK]. The root certificate is imported. Select [OK] on the confirmation screen to return to the [Set root certif] screen. Note To delete the root certificate imported to the camera, select [Delete root certificate] on the screen in step 5.
Page 690 Transferring Images Individually Automatic transfer after each shot Transferring the current image Specifying sizes or types of images to transfer Automatic transfer after each shot Each image can be immediately transferred to the FTP server automatically after your shot. You can continue shooting still photos as usual while images are being transferred. Before shooting, make sure a card is in the camera.
Page 691 Select [FTP transfer settings]. Select [Automatic transfer]. Select [Enable]. Take the picture. The captured image is transferred to the FTP server. Caution Images cannot be erased during image transfer. No voice memo can be added when [Automatic transfer] is set to [Enable].
Page 692 Note During continuous shooting, images are transferred to the FTP server in the order they are captured. Captured images are also stored on the card. Any images for which transfer fails or is interrupted will be transferred automatically when the connection is recovered ( ).
Page 693 Select an image. On the camera, press the < > button. Select an image to transfer, then press < > to transfer the image. You can add a voice memo to the current image before transfer. For details, see Recording Voice Memos.
Page 694 Select the size of images to transfer. Select [Separate JPEGs] or [Separate HEIFs], then choose the image size. To transfer smaller JPEG/HEIF images when the camera is set to record larger JPEG/HEIF images to one card and smaller ones to the other, set [Separate JPEGs] to [SmallerJPEG] or [Separate HEIFs] to [SmallerHEIF].
Page 695 Select the type of images to transfer. Shooting RAW+JPEG • Select [Shooting RAW+JPEG], then select [JPEG only], [RAW only], or [RAW+JPEG]. Shooting RAW+HEIF • Select [Shooting RAW+HEIF], then select [HEIF only], [RAW only], or [RAW+HEIF].
Page 696 Note When the camera is set to record RAW images to one card and JPEGs or HEIFs to the other, specify which images to transfer in the [Shooting RAW+JPEG] or [Shooting RAW+HEIF] setting. Similarly, specify your transfer preference when RAW+JPEG images or RAW+HEIF images are simultaneously recorded to a single card.
Page 697 Transferring Multiple Images at Once Selecting images to transfer Selecting multiple images Transferring RAW+JPEG or RAW+HEIF images After shooting, you can select multiple images and transfer them all at once, or you can transfer unsent images or images that could not be sent previously. You can continue shooting still photos as usual during transfer.
Page 698 Select [FTP transfer]. Select [Sel.Image]. Select the images to transfer. Use the < > dial to select an image to transfer, then press < >. Use the < > dial to add a checkmark [ ] in the upper left of the screen, then press <...
Page 699 Select [Transfer]. Select [OK]. The selected images are transferred to the FTP server.
Page 700 Selecting multiple images Multiple images can be transferred at once after you choose a selection method. You can continue shooting still photos as usual while images are being transferred. Access the [Image sel./transfer] screen. Follow steps 1–3 in Selecting images to transfer.
Page 701 In a folder Select [Sel. Select your preferred selection method. • Selecting [Select transfer failed images] selects all images in the selected folder for which transfer failed. • Selecting [Select images not transferred] selects all unsent images in the selected folder.
Page 702 Select [OK] to register the selected images to [Images to transfer].
Page 703 In a card Select [All images]. Select your preferred selection method. • Selecting [Select transfer failed images] selects all images on the card for which transfer failed. • Selecting [Select images not transferred] selects all unsent images on the card. •...
Page 704 Select range Select [Range]. Selecting the first and last images of the range marks all the images in the range with a checkmark [ ], and one copy of each image will be sent. After image selection, press the < >...
Page 705 Transferring RAW+JPEG or RAW+HEIF images For RAW+JPEG or RAW+HEIF images, you can specify which image to transfer. Select [ : Image transfer]. Select the type of images to transfer.
Page 706 RAW+JPEG transfer • Select [RAW+JPEG transfer], then select [JPEG only], [RAW only], or [RAW+JPEG]. RAW+HEIF transfer • Select [RAW+HEIF transfer], then select [HEIF only], [RAW only], or [RAW+HEIF]. Caution Some menu items are not available during image transfer. Note This setting is linked to [RAW+JPEG transfer] and [RAW+HEIF transfer] settings on the [Images to transfer] screen (...
Page 707 Adding a Caption Before Transfer You can add a registered caption to each image before transfer. This is convenient if you want to inform the recipient of the printing quantity, for example. Captions are also added to images saved to the camera. You can check captions added to images by examining the Exif information, in the user comments.
Page 708 Specify the caption. Select [Caption], and on the screen displayed, select the content of the caption. Select [Transfer]. The image is transferred with the caption. After transfer, display returns to the [Image transfer] screen. Caution Other images cannot be selected from the [Transfer with caption] screen. To select another image for transfer with a caption, view that image before following these steps.
Page 709 Auto Retry If Transfer Fails If transfer fails, the camera's < > lamp blinks in red. In this case, the following screen is displayed after you press the < > button and select [ : Network settings]. To resolve the error displayed, see Troubleshooting. Once you have resolved the issue, the images that could not be sent initially will be transferred automatically.
Page 710 Viewing Transferred Images Images transferred to the FTP server are stored in the following folder as specified in the FTP server settings. Target folder of the FTP server Under the default settings of the FTP server, images are stored in [C drive] → [Inetpub] folder →...
Page 711: Sending Images To A Web Service
This section describes how to send images to image.canon. Registering image.canon and Setting Up Auto Send You can register image.canon on the camera and prepare to send your shots automatically. A computer or smartphone with a browser and internet connection is required.
Page 712 In [Network], select [Enable]. Select [Upload to Web service]. Select [I Agree].
Page 713 Select [New settings]. Establish a Wi-Fi connection. Connect to an access point via Wi-Fi. Go to Checking the Type of Access Point. Enter your email address. Enter your email address, then select [OK].
Page 714 Enter a four-digit number. Enter a four-digit number of your choice, then select [OK]. Select [OK]. The [ ] icon changes to [...
Page 715 Steps on the computer or smartphone Set up camera web link. Access the page in the notification message. Follow the instructions to complete the settings on the camera web link settings page.
Page 716 Steps on the camera (2) Select [Upload to Web service]. Select [OK]. The [ ] icon changes to [...
Page 717 Select [Auto send]. Once [Enable] is set, images are automatically sent when you turn the camera on. Select [Type to send]. Set to [Stills only] or [Stills+movies]. Restart the camera. The images are now sent automatically. To switch networks, select [Switch network] and follow steps 5–8. To remove the connection, select [Clear camera web link settings] and then [OK].
Page 718 Caution Auto send does not start during interval timer shooting. Transfer stops in the following cases. • [ : Airplane mode] is set to [On] • Movie recording is started • A USB connection is started • Battery capacity is low •...
Page 719: Remote Control (Eos Utility)
Remote Control (EOS Utility) Configuring EOS Utility Connection Settings Using EOS Utility Direct Transfer Creating and Registering Captions Using EOS Utility, you can browse images on the camera and save them to the computer. Also in EOS Utility, you can shoot by controlling the camera remotely and change camera settings.
Page 720 Configuring EOS Utility Connection Settings These instructions are continued from Configuring Communication Function Settings. Establishing a connection also requires operations on the computer. For details, refer to the computer documentation. Steps on the camera (1) Select [OK]. The following message is displayed.
Page 721 Steps on the computer Start EOS Utility on the computer. In EOS Utility, click [Pairing over Wi-Fi/LAN]. If a firewall-related message is displayed, select [Yes]. Click [Connect] on the computer. Select the camera to connect to, then click [Connect]. If multiple cameras are listed, identify the camera to connect to by MAC address, as shown on the camera screen.
Page 722 Steps on the camera (2) Select [OK]. This message is displayed after the camera detects the computer where you clicked [Connect] in step 4. Select [OK]. Select [OK]. Select [OK]. Display returns to the [Network settings] screen. The camera's < >...
Page 723 Using EOS Utility For EOS Utility instructions, refer to the EOS Utility Instruction Manual. Remote shooting is only one of the many camera operations available. Caution Some menu items are not available when the camera is connected to a network. In remote shooting, the AF speed may become slower.
Page 724 Direct Transfer With the camera connected to EOS Utility and the main EOS Utility window displayed, you can use the camera to transfer images to computer. If you will transfer many images, consider using a household power outlet accessory (sold separately).
Page 725 Select [Sel.Image]. Select an image to transfer. Use the < > dial to select an image to transfer, then press < >. Use the < > dial to add a checkmark [ ] in the upper left of the screen, then press < >.
Page 726 Select [OK]. The selected images are transferred to the computer.
Page 727 Selecting multiple images Multiple images can be transferred at once after you choose a selection method. Access the [Image sel./transfer] screen. Follow steps 1–3 in Selecting images to transfer. Select a selection method.
Page 728 In a folder Select [Sel. Select your preferred selection method. • Selecting [Select transfer failed images] selects all images in the selected folder for which transfer failed. • Selecting [Select images not transferred] selects all unsent images in the selected folder.
Page 729 Select [OK] to register to [Images to transfer].
Page 730 In a card Select [All images]. Select your preferred selection method. • Selecting [Select transfer failed images] selects all images on the card for which transfer failed. • Selecting [Select images not transferred] selects all unsent images on the card. •...
Page 731 Select range Select [Range]. Selecting the first and last images of the range marks all the images in the range with a checkmark [ ], and one copy of each image will be sent. After image selection, press the < >...
Page 732 Transferring RAW+JPEG or RAW+HEIF images For RAW+JPEG or RAW+HEIF images, you can specify which image to transfer. Select [ : Image transfer]. Select the type of images to transfer.
Page 733 RAW+JPEG transfer • Select [RAW+JPEG transfer], then select [JPEG only], [RAW only], or [RAW+JPEG]. RAW+HEIF transfer • Select [RAW+HEIF transfer], then select [HEIF only], [RAW only], or [RAW+HEIF]. Caution Some menu items are not available during image transfer. Note This setting is linked to [RAW+JPEG transfer] and [RAW+HEIF transfer] settings on the [Images to transfer] screen (...
Page 734 Creating and Registering Captions You can create captions and register them on the camera to use them as described in Adding a Caption Before Transfer. Start EOS Utility and select [Camera settings]. Select [WFT Captions]. Enter the caption or captions. Enter up to 31 characters (in ASCII format).
Page 735 Set the captions on the camera. Select [Apply to camera] to set your new captions on the camera.
Page 736: Controlling The Camera With Browser Remote
Controlling the Camera with Browser Remote Configuring Browser Remote Connection Settings Displaying Browser Remote Browsing Images Shooting Remotely Registering IPTC Information Configuring FTP Server Settings Creating and Registering Captions Using a browser, you can browse and save camera images, shoot remotely, and perform other operations on a computer or smartphone.
Page 737 Configuring Browser Remote Connection Settings These instructions are continued from Configuring Communication Function Settings. Specify a login name and password for accessing the camera from a computer. The login name and password you specify here are used when connecting to the camera. Select [Full control] or [Browser *].
Page 738 Select [OK]. Select [OK]. Select [OK]. Display returns to the [Network settings] screen. Setting information is stored on the camera. Connection settings for Browser Remote are now complete. Note You can change account settings on the [Account settings] screen ( ), accessed by selecting [Browser Remote settings] in [Connection option settings].
Page 739 Displaying Browser Remote From a browser, log in to the Browser Remote page on the camera. Make sure the camera and computer are already connected via a wired LAN connection. Checking the camera's IP address The camera's IP address, as displayed in step 5, must be entered in the browser address bar to access the camera from a browser.
Page 740 Select [Confirm settings]. Setting details are displayed. Check the settings. Turn the < > dial to access other pages. Write down the IP address. After checking, press the < > button to close the confirmation screen. Logging in to Browser Remote Start a browser.
Page 741 Enter the information for [Login name] and [Password]. In [Login name] (user name) and [Password], enter the information you specified in Configuring Browser Remote Connection Settings. Select [OK] to display the top Browser Remote menu screen. Configure default settings as needed. Select [ ] to display the menu.
Page 742 • Language Enables you to select the display language. • Display theme You can set the Browser Remote background color. • AF for still photo shooting Displayed if you select [Shooting] in step 9. Enables you to configure how autofocus is used in still photo shooting.
Page 743 • Shutter mode Displayed if you select [Shooting] in step 9. You can set the shutter method for shooting still images. • Anti-flicker shoot. Displayed if you select [Shooting] in step 9. Enables you to configure anti-flicker shooting. • HF anti-flicker shooting Displayed if you select [Shooting] in step 9.
Page 744 • HTTPS settings Enables you to download a root certificate and access an FTP server, when you will connect to the FTP server via HTTPS. • Log out Select to end the Browser Remote connection. Caution Browser Remote is not available unless the browser support JavaScript. Some menu items are not available when connected to the camera via Browser Remote.
Page 745 Browsing Images Enables you to browse images on cards in the camera. Select [Playback]. The image browsing screen is displayed.
Page 746 Select a card and folder. Select a card in the pull-down list at left. Select a folder in the pull-down list at right. Perform image operations as needed.
Page 747 The image taken is automatically displayed by turning on [Auto update]. With [Select] selected, you can select multiple images. Selecting individual thumbnails selects each image separately. Selecting thumbnails again clears the selection. Selecting [Select all] marks all images on the browsing screen as selected.
Page 748 Selecting a thumbnail switches to the playback screen and shows the image enlarged. Still photo playback screen Movie playback screen...
Page 749 Audio playback screen Selecting an image and then [ ] erases the image. Selecting an image and then the [ ] button downloads the image to the computer. Note Computer performance and the browser used may prevent or delay image display or prevent image downloading.
Page 750 Shooting Remotely You can use Browser Remote to shoot remotely. Shooting still photos Select [Shooting]. The remote shooting screen is displayed.
Page 751 Still photo shooting button Movie shooting button Multi-function lock icon Shutter button MF toggle button AF area Metering mode Drive mode HDR shooting (10) Image quality (11) Still photo cropping/Aspect ratio (12) Battery level/Temperature warning (13) Browser Remote connection (14) Available shots (15) Electronic shutter...
Page 752 Select (1) Still photo shooting button. Set the lens's focus mode switch to < >. Display the Live View image. To show or hide the Live View image, select (29) Live View shooting button. For more responsive Live View image display, select (30) Live View image quality toggle button, which will reduce Live View image quality to improve responsiveness.
Page 753 Set up shooting. Select setting items (such as image quality) to view the setting details, which you can configure. Configure the settings as needed.
Page 754 Focus on the subject. When using autofocus To start AF with [AF button] selected in the [AF for still photo shooting] menu, select the (17) AF button. If you selected [Shutter button for AF/shooting] on the [AF for still photo shooting] menu, when you select the (4) Shutter button, AF is performed and a picture is taken.
Page 755 Take the picture. Select the (4) Shutter button to shoot. Captured images are saved to the card in the camera. To browse and download images, see Browsing Images. Caution Depending on the communication status, image display or shutter release timing may be delayed.
Page 756 Recording movies Select [Shooting]. The remote shooting screen is displayed. Select (2) Movie shooting button. Configure settings as needed. Follow steps 3–6 in Shooting still photos.
Page 757 Record the movie. Movie recording standby Movie recording in progress Select (4) Shutter button, and when you release the button, movie recording begins. During movie recording, the red [○] on (4) Shutter button changes to a white [□]. To stop movie recording, select (4) Shutter button again and release the button.
Page 758 Registering IPTC Information Enables you to edit and register IPTC* information (comments on images, such as captions, credits, and shooting locations) on the camera. Images can be tagged with IPTC information registered on the camera. * International Press Telecommunications Council Select [IPTC info].
Page 759 Edit and register information as needed. Selecting [Add to camera] to applies the edited IPTC information to the camera. This also sets the camera's Custom Function [ : Add IPTC information] option to [ Selecting [Clear camera info] deletes all IPTC information registered on the camera.
Page 760 Configuring FTP Server Settings If you will use FTP transfer for images captured remotely, you can use the camera's connection settings ( ) to change the target FTP server. Select [FTP settings]. The FTP setting screen is displayed.
Page 761 Select registered connection settings of the FTP server to use. Select [Change setting]. The camera's connection settings are changed to your selected settings. Note To use [FTP settings], you must register both [Browser Remote] ( ) and [FTP transfer] ( ) in the camera's connection settings.
Page 762 Creating and Registering Captions You can create captions and register them on the camera to use them as described in Adding a Caption Before Transfer. Select [FTP settings]. The FTP setting screen is displayed.
Page 763 Enter the caption or captions. Enter up to 31 characters (in ASCII format). To acquire caption data stored on the camera, select [Get from camera]. Set the captions on the camera. Select [Add to camera] to set your new captions on the camera.
Page 764: Ending Connections Or Reconnecting
Ending Connections or Reconnecting Ending Connections Reconnecting Ending Connections Select [ : Network settings]. Select [Connection settings].
Page 765 Select [Disconnect]. Select [OK]. The devices are disconnected.
Page 766 Reconnecting Select [ : Network settings]. Select [Connection settings]. Select [SET*]. In the saved settings, select settings to use for the connection.
Page 767 Select [Connect]. Select [OK]. The devices are connected again. If settings were changed on the target device, restore the previous settings to enable connections by the camera.
Page 768: Airplane Mode
Airplane Mode You can temporarily disable Wi-Fi functions. Select [ : Airplane mode]. Set to [On]. ] is displayed on the screen. Note ] may not be displayed in still photo shooting, movie recording, or playback, depending on display settings. If it is not displayed, press the < >...
Page 769: Checking And Editing Network Settings
Checking and Editing Network Settings Checking and Editing Connection Settings Manually Editing Connection Settings Specifying Connection Options Checking the MAC Address Checking and Editing Connection Settings You can check, change, or delete connection settings saved on the camera. Select [ : Network settings].
Page 770 Select [SET*]. In the saved settings, select settings to use for the connection.
Page 771 Check or change the settings. Connect • Select to re-establish a connection ( Change with wizard/Change from list • Change connection settings ( Save/load settings on card • Save connection settings to a card, or load saved connection settings from a card into the camera ( Delete settings •...
Page 772 Changing connection settings Settings originally completed using the connection wizard can be changed as follows. Change with wizard You can use the connection wizard to change connection settings saved on the camera. Access the [Connection settings] screen. Follow steps 1–3 in Checking and Editing Connection Settings.
Page 773 Change from list You can use communication and function settings saved on the camera to change connection settings saved on the camera. You can also register settings names. Access the [Connection settings] screen. Follow steps 1–3 in Checking and Editing Connection Settings.
Page 774 NW*/Comm settings* • Select to change, add, or clear communication settings. • Selecting [Select from list] lists communication settings saved on the camera. Select the communication settings to use. To view communication setting details, select settings and press the < >...
Page 775 Saving and loading settings Connection settings can be saved on a card and applied to other cameras. Connection settings configured on other cameras can also be applied to the camera you will use. Note [ : Save/load cam settings on card] enables you to save all communication settings on the camera to a card or load all communication settings for another camera from a card.
Page 776 Select [OK]. The file name is determined automatically by the camera: WFTNPF, followed by a number (01 to 40) and the extension NIF. To rename the file as desired, press the < > button. The settings are saved to the card. The settings file is saved to an area of the card shown when the card is opened (in the root directory).
Page 777 Loading settings Access the [Connection settings] screen. Follow steps 1–3 in Checking and Editing Connection Settings. Select [Save/load settings on card]. Select [Load settings from card]. Select a settings file. Select a settings file that matches your network environment.
Page 778 Select [OK]. Information from the settings file is loaded into the selected settings number. Caution Even if a computer or other device is used to save 41 or more settings files on a card, only 40 are displayed on the camera's screen for loading settings. To load 41 or more settings files, load 40 from one card, then load remaining files from another card.
Page 779 Manually Editing Connection Settings You can add, change, or delete communication and function settings saved on the camera. You can also configure settings that are not set using the connection wizard, such as a setting that determines what happens if files with the same name as existing files are sent to the FTP server.
Page 780 Select [NW*]. Select saved settings to edit. Change, delete, or check the settings as needed. Change • Select to change individual settings in sets of communication settings. • Selecting [Wireless LAN] enables you to change the target SSID, for example. •...
Page 781 Delete settings • Select to delete communication settings. • Selecting [OK] deletes the settings. Confirm settings • Select to check communication settings.
Page 782 Editing function settings Select [ : Network settings]. Select [Manual setting]. Select [Function settings]. Select [MODE*]. Select saved settings to edit.
Page 783 Change, delete, or check the settings as needed. Change • Selecting [Change mode name] enables you to use the virtual keyboard ( ) to rename the mode.
Page 784 • Selecting [FTP server] enables you to configure settings related to the FTP server. Directory Structure of the Target Folder Overwriting Files of the Same Name Passive Mode Trusting Target Servers...
Page 785 • Selecting [Viewable imgs] enables you to specify which images can be viewed on smartphones. Settings to Make Images Viewable from Smartphones Delete settings • Select to delete function settings. • Selecting [OK] deletes the settings. Confirm settings • Select to check function settings.
Page 786 Directory structure of the target folder Configured in [FTP server] → [Directory structure]. With [Default], the root folder is used for image storage. If you have created a subfolder in the root folder by changing the [Target folder] setting, images are saved in that folder. Selecting [Camera] automatically creates a folder structure matching that of the camera's (such as A/DCIM/100EOSR3) in the server's root folder for image storage.
Page 787 Specifying Connection Options You can configure settings used for FTP transfer and Browser Remote. Settings are also available for authentication information used in LAN environments with 802.1X authentication. Select [ : Network settings]. Select [Connection option settings]. Select an option to configure. FTP transfer settings Browser Remote settings Smartphone settings...
Page 788 FTP transfer settings Selecting [FTP transfer settings] enables you to configure settings related to FTP transfer and power saving. Automatic transfer / Images to transfer / Transfer with SET / Set root certif • For details, see Image Transfer to FTP Servers.
Page 789 Browser Remote settings Selecting [Browser Remote settings] enables you to set the account used for Browser Remote access and configure HTTP/HTTPS communication settings. Account settings • For details, see Configuring Browser Remote Connection Settings. Port no. (HTTP)/Port no. (HTTPS) • You can change the port number used for HTTP/HTTPS communication. There is normally no need to change the port number (80 for HTTP, 443 for HTTPS).
Page 790 Smartphone settings Selecting [Send to smartphone after shot] in [Smartphone settings] enables you to set the size of images to send automatically. Auto send / Size to send • For details, see Automatic Image Transfer as You Shoot.
Page 791 802.1X authentication Selecting [802.1X authentication] enables you to set, check, or delete 802.1X authentication settings, using a setup wizard. Configure these settings when connecting to networks that require 802.1X authentication. First, save the certificate for the type of 802.1X authentication used to a card in the camera. File types and names that can be loaded using this function are as follows.
Page 792 Note that the camera supports following protocols. Protocol Supported Authentication EAP-TLS X.509 EAP-TTLS MSCHAPv2 PEAP MSCHAPv2 Setup wizard • Follow the wizard to configure the authentication settings. Confirm settings • Select to check authentication settings. Delete settings • Select to delete authentication settings. Selecting [OK] on the screen displayed deletes the settings.
Page 793 Checking the MAC Address You can check the camera's MAC address. Select [ : Network settings]. Select [MAC address]. Check the MAC address. The MAC addresses for [Wi-Fi] and [Wired] are displayed.
Page 794: Syncing Time Between Cameras
Syncing Time Between Cameras Preparing for Time Syncing Syncing the Time You can set the sender camera time on up to 10 receiver cameras. Note that even after synchronization, a slight margin of error applies between sender and receiver camera time (of ±0.05 seconds, at most).
Page 795 Preparing for Time Syncing When using a single receiver camera, connect a LAN cable to the Ethernet RJ-45 terminal of the sender and receiver cameras. (A) Sender camera (B) Receiver camera (C) LAN cable...
Page 796 When using multiple receiver cameras, connect a LAN cable from the Ethernet terminal of the sender and receiver cameras to a hub. Up to 10 receiver cameras can be connected. (A) Sender camera (B) Receiver camera (C) LAN cable (D) Hub Use a highly shielded Category 5e or higher STP (Shielded Twisted Pair) Gigabit Ethernet cable.
Page 797 Syncing the Time Preparing the sender camera First, set up the camera to use as a sender. On the camera, press the < > button. Select [ : Network settings]. In [Network], select [Enable]. Select [Sync time between cameras]. If the camera is already connected to another device, [Set [Connection settings] to [Disconnect]] is displayed.
Page 798 Select [OK]. Select [OK]. Select [Sender]. Select [OK] to go to the next screen. After the screen is displayed, the camera is ready.
Page 799 Preparing receiver cameras Set up cameras to use as receivers. Follow steps 1–6 in Preparing the Sender Camera. Select [Receiver]. Select [OK] to go to the next screen. Select [OK]. The following screen is displayed. To set the time on multiple receiver cameras, follow steps 1–2 on each receiver camera.
Page 800 Syncing time between sender and receiver cameras Sync the time on the sender and receiver cameras as follows. Follow steps 1–6 in Preparing the sender camera and steps 1–3 in Preparing receiver cameras. On the sender camera, select [OK]. Check the number of receiver cameras, then select [OK]. After the time is synchronized, the next screen is displayed.
Page 801: Setting Up Gps Features
Setting Up GPS Features GPS Settings GPS Precautions GPS features of the camera can be used to geotag images, set the time, and more. The camera can receive signals from GPS satellites (USA), GLONASS satellites (Russia), and the Quasi-Zenith Satellite System “Michibiki” (Japan). Caution Geotag information may not be recorded or inaccurate information may be recorded where GPS signal coverage is poor, such as in the following places.
Page 802 GPS Settings Select [ : GPS settings]. Configure GPS details.
Page 803 Specify the GPS operating mode. In [Mode 1], the camera continues to acquire GPS signals at regular intervals with the power switch set to < > or even < >. In [Mode 2], the camera acquires GPS signals with the power switch set to < >.
Page 804 Auto time setting Time information acquired from GPS signals can be set on the camera. The margin of error is approx. ±0.02 sec. Selecting [Auto update] will update the time when GPS signals are received while the camera is on. Caution The time cannot be automatically updated unless signals from at least five GPS satellites can be acquired.
Page 805 GPS information display Shows acquired GPS information. The [ ] icon indicates signal conditions. When [ ] is displayed, elevation is also recorded. Note that elevation is not recorded when [ ] is displayed. You can check geotag information by displaying a shot, pressing the < >...
Page 806 GPS logger By setting [Log GPS position] to [Enable], you can automatically record geotag information at specific intervals along the route that the camera travels. Geotag information is recorded at the interval set in [Position update intvl] as log data saved in the camera's internal memory by date.
Page 807 Caution In [Mode 1], GPS logging continues even with the power switch set to < >. In [Mode 2], setting the power switch to < > deactivates GPS logging. However, GPS logging continues during auto power off. Geotag information added to images may be inaccurate under some traveling conditions, in some locations, or under some GPS settings.
Page 808 Position data retention To continue geotagging images even where satellite coverage is poor (if you go indoors, for example) by using geotag information in log data, setting [Position data retention] to [Unlimited] is recommended. The most recently acquired geotag information is added to log data until new information can be acquired.
Page 809 To avoid violating GPS regulations, visit the Canon website to check where use is allowed. Note that Canon cannot be held liable for any problems arising from use of GPS functions in other countries and regions.
Page 810: Connecting To A Wireless Remote Control
Connecting to a Wireless Remote Control Canceling the Pairing This camera can also be connected to Wireless Remote Control BR-E1 (sold separately, via Bluetooth for remote control shooting. Select [ : Bluetooth settings]. In [Bluetooth], select [Remote]. Select [Pairing].
Page 811 Pair the devices. When the [Pairing] screen appears, press and hold the <W> and <T> buttons on the BR-E1 simultaneously for at least 3 sec. After a message confirms that the camera is paired with the BR-E1, press < >. Set up the camera for remote shooting.
Page 812 Canceling the Pairing Before pairing with a different BR-E1, clear the information about the connected remote control. Select [ : Bluetooth settings]. Select [Check/clear connection info]. Press the < > button.
Page 813 Select [OK].
Page 814: Reference
Reference Changing the Camera Nickname Virtual Keyboard Operations Configuring IPv6 Changing the Camera Nickname You can change the nickname of this camera (displayed on connected devices) as desired. Select [ : Nickname]. Enter text using the virtual keyboard ( When you finish entering characters, press the < >...
Page 815 Select [OK].
Page 816 Virtual Keyboard Operations Input area, for entering text Cursor keys, for moving in the input area Current no. of characters/no. available Keyboard Switch input modes Space Delete a character in the input area Exit input Use < > or the < >...
Page 817 Configuring IPv6 To use IPv6, configure the settings manually. Note If you are unsure what to enter, ask the network administrator or other person in charge of the network. Select [ : Network settings]. Select [Manual setting]. Select [Comm settings].
Page 818 Select the communication settings that will use IPv6. Select [Change]. Select [TCP/IPv6].
Page 819 Select an option to configure. Use TCP/IPv6 • Select [Enable] or [Disable] for IPv6. Manual setting • To set the IP address manually, select [Enable]. [DNS server] is set to [Manual setting], and you can configure [DNS address], [Manual address], [Prefix length], and [Gateway].
Page 820 DNS server • To set the DNS server IP address manually, select [Manual setting]. • Select [Disable] if you will not use a DNS server. • If the setting is currently [Auto assign], setting [Manual setting] to [Enable] changes it to [Manual setting]. DNS address/Manual address/Gateway •...
Page 821: Troubleshooting
Troubleshooting Responding to Error Messages Troubleshooting Guide Communication Function Precautions Security Checking Network Settings Responding to Error Messages Resolve any errors displayed on the camera screen by referring to these examples of corrective actions. When errors occur, the < > lamp on the camera blinks and the error number is shown on the LCD panel.
Page 822 11: Connection target not found In the case of [Smartphone], is Camera Connect running? • Establish a connection using Camera Connect ( In the case of [EOS Utility], is EOS Utility running? • Start EOS Utility and try to connect again ( Are the camera and the access point set to use the same encryption key for authentication? •...
Page 823 21: No address assigned by DHCP server What to check on the camera On the camera, the IP address is set to [Auto setting]. Is this the correct setting? • If no DHCP server is used, configure the setting after setting the IP address to [Manual setting] on the camera ( What to check on the DHCP server Is the power of the DHCP server on?
Page 824 22: No response from DNS server What to check on the camera On the camera, the DNS address is set to [Manual setting]. Is this the correct setting? • If no DNS server is used, set the camera's DNS address setting to [Disable] ( On the camera, does the DNS server's IP address setting match the server's actual address? •...
Page 825 23: Device with same IP address exists on selected network Is another device on the camera network using the same IP address as the camera? • Change the camera's IP address to avoid using the same address as another device on the network. Otherwise, change the IP address of the device that has a duplicate address.
Page 826 What to check on the FTP server Is the FTP server working correctly? • Configure the computer correctly to function as an FTP server. • If applicable, ask your network administrator for the FTP server address and port number, then set them on the camera. Is the FTP server on? •...
Page 827 What to check on the network as a whole Does your network include a router or similar device that serves as a gateway? • If applicable, ask your network administrator for the network gateway address and set it on the camera ( •...
Page 828 43: Cannot connect to FTP server. Error code received from server. What to check on the proxy server Is the proxy server on? • Turn on the proxy server. Is the proxy server working correctly? • Check the proxy server settings to make sure the server is working correctly as a proxy server.
Page 829 45: Cannot login to FTP server. Error code received from server. What to check on the camera On the camera, is the [Login name] set correctly? • Check the login name for accessing the FTP server. Check upper- and lower-case letters, and make sure the correct login name is set on the camera ( On the camera, is the [Login password] set correctly? •...
Page 830 46: For the data session, error code received from FTP server What to check on the FTP server The connection was terminated by the FTP server. • Restart the FTP server. Do the user rights for the FTP server allow reading, writing, and log access? •...
Page 831 61: Selected SSID wireless LAN network not found Are any obstacles blocking the line of sight between the camera and the antenna of the access point? • Move the antenna of the access point to a position clearly visible from the point of view of the camera.
Page 832 65: Wireless LAN connection lost Are any obstacles blocking the line of sight between the camera and the antenna of the access point? • Move the antenna of the access point to a position clearly visible from the point of view of the camera.
Page 833 81: Wired LAN connection lost Is the LAN cable securely connected? • Reconnect the LAN cable between the camera and server. Because the cable may be severed, try using another cable to connect the devices. Is the hub or router on? •...
Page 834 A problem other than error code number 121 to 126 occurred while the camera is connected to the Web service. • Try again to establish the Wi-Fi connection to image.canon. 130: The server is currently busy Please wait a moment and try again The image.canon site is busy at the moment.
Page 835 Troubleshooting Guide Troubleshoot camera issues by checking the camera and connected devices as described in this section. If troubleshooting does not resolve the problem, contact a Canon Service Center for product information and advice on product handling. Cannot transfer images to an FTP server.
Page 836 Communication Function Precautions In case of slower transmission, lost connections, choppy image display, or other problems when using communication functions, try the following corrective actions. Access point and antenna installation location When using the camera indoors, install the access point in the same room where you are shooting.
Page 837 Security If security settings have not been properly set, the following problems may occur. Transmission monitoring Third parties with malicious intent may monitor wireless LAN transmissions and attempt to acquire the data you are sending. Unauthorized network access Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.
Page 838 Checking Network Settings Windows Open the Windows [Command Prompt], then enter ipconfig/all and press the <Enter> key. In addition to the IP address assigned to the computer, the subnet mask, gateway, and DNS server information are also displayed. macOS In macOS, open the [Terminal] application, enter ifconfig -a, and press the <Return> key.
Page 839: Resetting Communication Settings
Resetting Communication Settings All settings of network features can be cleared. This can prevent the information from being leaked if you lend the camera or transfer ownership. Select [ : Reset communication settings]. Select [OK]. Caution If you have paired the camera with a smartphone, on the smartphone's Wi-Fi settings screen, remove the Wi-Fi connection information of the camera for which you restored default wireless communication settings.
Page 840: Set-Up
Set-up This chapter describes menu settings on the set-up [ ] tab. • Tab Menus: Set-up • Selecting Cards for Recording/Playback • Folder Settings • File Numbering • File Naming • Card Formatting • Auto Rotate • Adding Orientation Information to Movies •...
Page 841: Tab Menus: Set-Up
Tab Menus: Set-up Set-up 1 (1) Record func+card/folder sel. • Selecting Cards for Recording/Playback • Creating a Folder File numbering File name Format card Auto rotate rotate info Date/Time/Zone Set-up 2 Language Video system Help text size Beep Volume Headphones Power saving...
Page 842 Set-up 3 Screen/viewfinder display Screen brightness Viewfinder brightness Screen/viewfinder color tone Fine-tune VF color tone UI magnification HDMI resolution Set-up 4 Eye control Touch control Multi function lock Shutter at shutdown Sensor cleaning Choose USB connection app...
Page 843 Set-up 5 Reset camera Custom shooting mode (C1-C3) Save/load cam settings on card Battery info. Copyright information System status display Manual/software URL Set-up 6 Certification Logo Display Firmware...
Page 844: Selecting Cards For Recording/Playback
Selecting Cards for Recording/Playback Recording Method with Two Cards Inserted Recording/Playback Selection with Two Cards Inserted Recording is possible when card 1 ( ) or 2 ( ) is in the camera (except under some conditions). With only one card inserted, there is no need to follow these steps. With two cards inserted, you can select the recording method and card to use for recording and playback as follows.
Page 845 Set the recording method. separate • Select [Enable] for automatic configuration of the recording method for still photos and movies. Movies are recorded to card and still photos to card • Movie recording is not possible if card is full or not inserted. •...
Page 846 Rec options Set the recording method for still photos. • Standard Records still photos to the card selected in [ Record/play]. • Auto switch card Same as [Standard], but additionally, the camera switches to the other card when one card becomes full. At this time, a new folder is created.
Page 847 Note Rec. separately/Rec. to multiple Images are recorded with the same file number to card The number of shots available as shown in the viewfinder and on the Quick Control screen is for the card with less free space. [Card* full] is displayed when one of the cards becomes full, and shooting is no longer possible.
Page 848 Rec options Set the recording method for movies. • Standard Records movies to the card selected in [ Record/play]. • Auto switch card Same as [Standard], but recording ends when the card becomes full. When you resume recording, the camera switches to the other card for recording.
Page 849 Caution Rec. to multiple Record to multiple is not available for the following movies. • RAW movies • 4K 59.94/50.00 fps ALL-I • 4K High Frame Rate movies Note Rec. to multiple Images are recorded with the same file number to card The number of shots available as shown in the viewfinder and on the Quick Control screen is for the card with less free space.
Page 850 Recording/Playback Selection with Two Cards Inserted With [ Rec options]/[ Rec options] set to [Standard] or [Auto switch card], select the card for recording and playback. With [ Rec options] set to [Rec. separately] or [Rec. to multiple], or with [ options] set to [ ] or [Rec.
Page 851 Note With [Priority: ] set, the camera switches to the priority card when cards are inserted or removed.
Page 852: Folder Settings
Folder Settings Creating a Folder Renaming Folders Selecting a Folder You can freely create and select the folder where the captured images are to be saved. You can also rename folders. Creating a Folder Select [ : Record func+card/folder sel.]. Select [Folder].
Page 853 Select [Create folder]. Select [OK]. To rename the folder, select [Change folder name].
Page 854 Renaming Folders Enter letters and numbers of your choice. You can enter five characters. By selecting [ ], you can change the input mode. To delete single characters, select [ ] or press the < > button. Use the < >...
Page 855 Selecting a Folder (1) Number of images in folder (2) Lowest file number (3) Folder name (4) Highest file number Select a folder on the folder selection screen. Captured images are stored in your selected folder. Note Folders Folders are named as in “100EOSR3,” with a three-digit folder number followed by five letters or numbers.
Page 856: File Numbering
File Numbering Continuous Auto Reset Manual Reset The captured images saved in a folder are assigned a file number from 0001 to 9999. You can change how the image files are numbered. (Example) (1) File number Select [ : File numbering].
Page 857 Set the item. Select [Numbering]. Select [Continuous] or [Auto reset]. If you want to reset the file numbering, select [Manual reset] ( Select [OK] to create a new folder, and the file number will start with 0001. Caution If the file number in folder 999 reaches 9999, shooting will not be possible even if the card still has free space.
Page 858 Continuous For continuous file numbering regardless of switching cards or creating folders File numbering is continuous up to 9999, even if you replace a card, create a folder, or switch the target card (as in → ). This is useful when you want to save images numbered anywhere between 0001 to 9999 on multiple cards or in multiple folders into one folder on a computer.
Page 859 Auto Reset For restarting file numbering from 0001 after switching cards or creating folders File numbering is reset to 0001 if you replace a card, create a folder, or switch the target card (as in → ). This is useful if you want to organize images by cards or folders. Note that file numbering may continue from any existing images in cards or folders that you switch to.
Page 860 Manual Reset For resetting file numbering to 0001 or starting from 0001 in new folders When you reset the file numbering manually, a new folder is created automatically and the file numbering of images saved to that folder starts from 0001. This is useful, for example, if you want to use different folders for the images taken yesterday and the ones taken today.
Page 861: File Naming
File Naming Registering/Changing File Names File names consist of four alphanumeric characters followed by a four-digit file number ( and file extension. You can change the first four alphanumeric characters, which by default are unique for each camera and set when the camera is shipped. User setting 1 enables you to register four characters of your choice.
Page 862 Enter letters and numbers of your choice. Enter four characters for User setting 1 or three for User setting 2. By selecting [ ], you can change the input mode. To delete single characters, select [ ] or press the < >...
Page 863 Select a registered file name. Select [File name], then choose a registered file name. Caution An underscore (“_”) cannot be used as the first character. Note Notes on [User setting2] Shooting after you have selected “*** + image size” (as registered to User setting 2) will add a character representing the current image size to your file name as the fourth character.
Page 864: Card Formatting
Card Formatting If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera. Caution When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep.
Page 865 Format the card. Select [OK]. For low-level formatting, press the < > button to add a checkmark [ ] to [Low level format], then select [OK].
Page 866 Conditions requiring card formatting The card is new. The card was formatted by a different camera or a computer. The card is full of images or data. A card-related error is displayed ( Low-level formatting Perform low-level formatting if the card's writing or reading speed seems slow or if you want to totally erase the data on the card.
Page 867: Auto Rotate
Auto Rotate You can change the auto rotation setting that straightens images shot in vertical orientation when they are displayed. Select [ : Auto rotate].
Page 868 Select an option. Automatically rotates images for display on both the camera and computers. Automatically rotates images only for display on computers. Images are not automatically rotated. Caution Images captured with auto rotation set to [Off] will not rotate during playback even if you later set auto rotation to [On].
Page 869: Adding Orientation Information To Movies
Adding Orientation Information to Movies For movies recorded with the camera held vertically, orientation information indicating which side is up can be added automatically to enable playback in the same orientation on smartphones or other devices. Select [ : Add rotate info].
Page 870 Caution [Add rotate info] is not available for RAW or MP4 files when the movie recording format is Movies are played horizontally on the camera and via HDMI video output, regardless of this setting.
Page 871: Date/Time/Zone
Date/Time/Zone When you turn on the power for the first time or if the date/time/zone have been reset, follow these steps to set the time zone first. By setting the time zone first, you can simply adjust this setting as needed in the future and the date/time will be updated to match it.
Page 872 Turn the < > dial to select the time zone, then press < >. If your time zone is not listed, press the < > button, then set the difference from UTC in [Time difference]. Turn the < > dial to select a [Time difference] option (+ / − / hour / minute), then press <...
Page 873 Set daylight saving time. Set it as necessary. Turn the < > dial to select [ ], then press < >. Turn the < > dial to select [ ], then press < >. When the daylight saving time is set to [ ], the time set in step 3 will advance by 1 hour.
Page 874 Note Auto power off time may be extended while the [ : Date/Time/Zone] screen is displayed.
Page 875: Language
Language Select [ : Language Set the desired language.
Page 876: Video System
Video System Set the video system of any television used for display. This setting determines the frame rates available when you record movies. Select [ : Video system]. Select an option. For NTSC For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.).
Page 877: Help
Help Changing the Help Text Size When [ Help] is displayed, you can display a description of the feature by pressing the < > button. Press it again to exit Help display. To scroll the screen when a scrollbar (1) appears on the right, turn the <...
Page 878 Example: [ : Multi function lock] < >...
Page 879 Changing the Help Text Size Select [ : Help text size]. Select an option.
Page 880: Beeps
Beeps Select [ : Beep]. Select an option. Enable The camera beeps after focusing and in response to touch operations. Disable Disables beeping for focus confirmation, self-timer shooting, and touch operations. Note By default, beeping volume for touch operations is set to [0] (...
Page 881: Volume
Volume The volume of camera sounds is adjustable. Select [ : Volume]. Set the option. Select an option, then turn the < > dial to adjust the volume.
Page 882: Headphones
Headphones Select [ : Headphones]. Select [Volume]. Adjust the volume. Turn the < > dial to adjust the volume, then press < >.
Page 883 Note You can check sound from the built-in microphone or an external microphone on headphones when [ : Sound recording] is set to an option other than [Disable] and [High Frame Rate] is set to [Disable].
Page 884: Power Saving
Power Saving You can adjust the timing of when the screen dims and then turns off, when the camera turns off, and when the viewfinder turns off after the camera is left idle (Screen dimmer, Screen off, Auto power off, and Viewfinder off). Select [ : Power saving].
Page 885: Screen And Viewfinder Display
Screen and Viewfinder Display You can specify to use the screen or viewfinder for display, to avoid accidentally activating the viewfinder sensor when the screen is open. Select [ : Screen/viewfinder display]. Select an option. AUTO1: Auto 1 ( : only screen) Always use the screen for display when it is open.
Page 886 Note You can also switch between viewfinder and screen display by pressing a button you have customized by assigning to switching. With this setting set to [AUTO1] or [AUTO2], the camera responds to the viewfinder sensor accordingly. With [AUTO1] set, the camera does not respond to the viewfinder sensor when the screen is open.
Page 887: Screen Brightness
Screen Brightness Select [ : Screen brightness]. Make the adjustment. Referring to the gray image, turn the < > dial to adjust brightness, then press < >. Check the effect on the screen. Note To check the image's exposure, referring to the histogram is recommended (...
Page 888: Viewfinder Brightness
Viewfinder Brightness Select [ : Viewfinder brightness]. Turn the < > dial and select either [Auto] or [Manual]. Auto Press < >. Check the effect in the viewfinder while shooting. Manual Turn the < > dial to adjust viewfinder brightness, then press < >.
Page 889: Screen And Viewfinder Color Tone
Screen and Viewfinder Color Tone Select [ : Screen/viewfinder color tone]. Make the adjustment. Turn the < > dial to select an option, then press < >.
Page 890: Fine-Tuning Viewfinder Color Tone
Fine-Tuning Viewfinder Color Tone Select [ : Fine-tune VF color tone]. Make the adjustment. Referring to the gray image, use < > for adjustment, then press < >. Check the effect in the viewfinder.
Page 891: Ui Magnification
UI Magnification You can magnify menu screens by double-tapping with two fingers. Double-tap again to restore the original display size. Select [ : UI magnification]. Select [Enable]. Caution Use camera controls when configuring menu functions with the display magnified. Touch-screen operations are not supported.
Page 892: Hdmi Resolution
HDMI Resolution Set the image output resolution used when the camera is connected to a television or external recording device with an HDMI cable. Select [ : HDMI resolution]. Select an option. Auto The images will automatically be displayed at the optimum resolution matching the connected television.
Page 893: Touch Control
Touch Control Select [ : Touch control]. Select an option. [Sensitive] makes the touch-screen panel more responsive than [Standard]. To disable touch operations, select [Disable]. Caution Precautions for touch-screen panel operations Do not use sharp objects such as fingernails or ballpoint pens for touch operations. Do not use wet fingers for touch operations.
Page 894: Multi-Function Lock
Multi-Function Lock Specify camera controls to lock when the Multi-function lock is enabled. This can help prevent accidentally changing settings. Select [ : Multi function lock]. Select camera controls to lock. Press < > to add a checkmark [ ]. Select [OK].
Page 895: Shutter At Shutdown
Shutter at Shutdown You can set whether to leave the shutter open or close it when the camera's power switch is set to < >. Select [ : Shutter at shutdown]. Select an option. : Closed Closes the shutter. Normally set to closed, to prevent dust from adhering to the sensor when you switch lenses.
Page 896: Sensor Cleaning
Sensor Cleaning Cleaning Now Cleaning Automatically Cleaning Manually The camera's sensor cleaning feature cleans the front of the image sensor. Note For best results, clean with the camera in a stable position on a desk or other flat surface. Cleaning Now Select [ : Sensor cleaning].
Page 897 Select [Clean now Select [OK] on the confirmation screen. Note Even if you repeat the sensor cleaning, the result will not improve much. Note that [Clean now ] may not be available immediately after cleaning.
Page 898 Cleaning Automatically Select [Auto cleaning Select an option. Turn the < > dial to select an option, then press < >. Note When set to [At pwr off] or [Enable], the sensor is cleaned when the screen goes off, including when it has been turned off automatically.
Page 899 Always use a fully charged battery. The image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. Select [Clean manually]. Select [OK].
Page 900 If the battery level becomes low while cleaning the sensor, the beeper will sound as a warning. Stop cleaning the sensor. If a smudge that cannot be removed with a blower remains, having the sensor cleaned by a Canon Service Center is recommended.
Page 901: App Selection For Usb Connections
Select if you will use EOS Utility after connecting to a computer, or if you will use dedicated Android apps or the iOS version of Photos. Canon app(s) for iPhone Select if you will use dedicated iOS apps. Connecting the camera to a smartphone requires a cable for this purpose.
Page 902: Resetting The Camera
Resetting the Camera The camera's settings for shooting functions and menu functions can be restored to their defaults. Select [ : Reset camera]. Select an option. Reset individual settings Settings for individual selected options can be reset. Factory reset Resets all settings to defaults. Clear the settings.
Page 903 Note Still photo Custom shooting modes are reset when [Custom shooting mode (C1- C3)] in [Reset individual settings] is selected in still photo shooting mode, and movie Custom shooting modes are reset when this option is selected in movie recording mode.
Page 904: Custom Shooting Mode (C1-C3)
Custom Shooting Mode (C1–C3) Automatic Update of Registered Settings Canceling Registered Custom Shooting Modes Current camera settings such as shooting, menu, and Custom Function settings can be registered in Custom shooting modes [ ] to [ ]. You can register different functions to use when shooting still photos or movies.
Page 905 Register the desired items. Select the Custom shooting mode to register, then select [OK] on the [Register settings] screen. The current camera settings are registered to Custom shooting mode Automatic Update of Registered Settings If you change a setting while shooting in Custom shooting mode, the mode can be automatically updated with the new setting (Auto update).
Page 906 Canceling Registered Custom Shooting Modes If you select [Clear settings] in step 2, the settings of each mode can be restored to default settings, as they were before registration. Note You can also change shooting and menu settings in Custom shooting modes.
Page 907: Save/Load Camera Settings On Card
By loading a camera settings file, you can apply the state of the settings as saved. This enables you to save and apply optimal settings for specific shooting situations, or load settings files on other EOS R3 cameras to use the cameras with the same settings.
Page 908 Naming. The steps are the same. Caution Camera settings files saved by a camera other than an EOS R3 cannot be loaded on this camera. It may not be possible to load camera settings files that were saved by a camera with a different firmware version.
Page 909 Loading Camera Settings In step 2 of Saving Camera Settings, select [Load from card] to display up to ten camera settings files on the card. Select a file, and the camera will load it and apply the state of the settings as saved.
Page 910: Battery Information
(Green): Battery recharge performance is slightly degraded. (Red): Purchasing a new battery is recommended. Caution Using a genuine Canon Battery Pack LP-E19 is recommended. If you use batteries that are not genuine Canon products, the camera's full performance may not be attained or malfunction may result.
Page 911 Note The shutter count is the number of still photos taken (not including movie recording). If a battery communication error message is displayed, follow the instructions in the message.
Page 912: Copyright Information
Copyright Information Checking the Copyright Information Deleting the Copyright Information When you set the copyright information, it will be recorded to the image as Exif information. Caution If the entry for “Author” or “Copyright” is long, it may not be displayed entirely when you select [Display copyright info.].
Page 913 Enter text. Use the < > or < > dial or < > to select a character, then press < > to enter it. By selecting [ ], you can change the input mode. To delete single characters, select [ ] or press the <...
Page 914 Deleting the Copyright Information When you select [Delete copyright information] in step 2, you can delete the [Author] and [Copyright] information.
Page 915: System Status Display
You can also check the status log for past errors. Checking camera status with this feature and requesting any required maintenance at a Canon Service Center can reduce camera problems. Checking the Error Log You can check a record of past errors, as well as lens, flash, and battery usage at the time of occurrence.
Page 916 Check the details as needed. Note The camera status log screen lists as many as five recent error records. Older records are automatically deleted. Shutter-release cycles are indicated in units of 1,000. Electronic shutter release is not included in the number of shutter- release cycles.
Page 917 Check the details as needed. Turn the < > dial to select an item, then press the < > button to view error details. Turn the < > dial to check details.
Page 918 Clearing the Camera Status Log To clear all log information displayed, press the < > button in step 3 of Checking the Error Log.
Page 919: Other Information
Other Information Manual/software URL To download instruction manuals, select [ : Manual/software URL] and scan the displayed QR code with a smartphone. You can also use a computer to access the website at the URL displayed and download software. Certification Logo Display Select [ : Certification Logo Display] to display some of the logos of the camera's certifications.
Page 920: Custom Functions/My Menu
Custom Functions/My Menu You can fine-tune camera functions and change the functionality of buttons and dials to suit your shooting preferences. You can also add menu items and Custom Functions that you adjust frequently to My Menu tabs. • Tab Menus: Custom Functions •...
Page 921: Tab Menus: Custom Functions
Tab Menus: Custom Functions Custom Functions 1 Exposure level increments ISO speed setting increments Speed from metering/ISO Auto Bracketing auto cancel Bracketing sequence Number of bracketed shots Safety shift Custom Functions 2 Same expo. for new aperture AE lock meter. mode after focus Restrict shooting modes Restrict metering modes Metering used in manual exp...
Page 922 Custom Functions 3 AE Microadjustment FE Microadjustment Limit continuous shot count Restrict drive modes Custom Functions 4 direction to set Tv/Av direction to set Tv/Av Customize buttons Customize dials Clear customized settings...
Page 923 Custom Functions 5 switching ( Smart controller Vertical shooting controls Custom Functions 6 Add cropping information Shutter release time lag Audio compression Default Erase option Av setting without lens Release shutter w/o lens...
Page 924 Custom Functions 7 Retract lens on power off Add IPTC information Custom Functions 8 Clear all Custom Func. (C.Fn) Selecting [ : Clear all Custom Func. (C.Fn)] clears all Custom Function settings.
Page 925: Custom Function Setting Items
Custom Function Setting Items You can customize camera features on the [ ] tab to suit your shooting preferences. Any settings you change from default values are displayed in blue.
Page 926 Exposure level increments You can specify to use 1/2-stop increments as the increments for shutter speed, aperture value, exposure compensation, AEB, flash exposure compensation, and FEB. 1/3: 1/3-stop 1/2: 1/2-stop Note Display when set to [1/2-stop] is as follows. ISO speed setting increments You can change the manual ISO speed setting increment to a whole stop.
Page 927 Speed from metering/ISO Auto You can set the ISO speed status after the metering timer ends in cases where, for ISO Auto operation in [ ]/[ ] mode, the camera has adjusted the ISO speed during metering or during the metering timer. : Restore Auto after metering : Retain speed after metering Bracketing auto cancel...
Page 928 Number of bracketed shots The number of shots taken with AEB and white balance bracketing can be changed. When [Bracketing sequence] is set to [0, -, +], the bracketed shots will be taken as shown in the following table. 3: 3 shots 2: 2 shots 5: 5 shots 7: 7 shots...
Page 929 Safety shift If the subject brightness changes and the standard exposure cannot be obtained within the autoexposure range, the camera will automatically change the manually selected setting to obtain the standard exposure. [Shutter speed/Aperture] applies to [ ] or [ ] mode.
Page 930 Same expo. for new aperture The maximum aperture value may decrease (the lowest f/number may increase) in [ mode (manual exposure shooting) with ISO speed set manually (except when set to ISO Auto) if you (1) Change lenses, (2) Attach an extender, or (3) Use a zoom lens with a variable maximum aperture value.
Page 931 AE lock meter. mode after focus For each metering mode, you can specify whether to lock the exposure (AE lock) once subjects are in focus with One-Shot AF. The exposure will be locked while you keep pressing the shutter button halfway. Select metering modes for AE lock and add a checkmark [ ].
Page 932 Restrict metering modes You can restrict the metering modes available with the < > button. Select available metering modes [ ], then press < > to add a checkmark [ ]. Select [OK] to register the setting. Caution The [ ] mark cannot be cleared from all four modes at the same time. Metering used in manual exp You can set the metering mode used in [ ] shooting mode.
Page 933 Set shutter speed range You can set the shutter speed range for each [ : Shutter mode] option. In [ ], [ ], or ] mode, you can set the shutter speed manually within your specified range. In [ ] and ] mode, or in [ ] mode with shutter speed set to [AUTO], the shutter speed is set automatically within your specified range (except for movie recording).
Page 934 AE Microadjustment Caution Normally, this adjustment is not required. Perform this adjustment only if necessary. Note that performing this adjustment may prevent you from obtaining suitable exposure. You can fine-tune the standard exposure level. Effective if images in autoexposure shooting without exposure compensation usually seem underexposed or overexposed.
Page 935 FE Microadjustment Caution Normally, this adjustment is not required. Perform this adjustment only if necessary. Note that performing this adjustment may prevent you from obtaining suitable flash exposure. You can fine-tune the standard flash exposure level. Effective if main subjects in autoflash shooting without flash exposure compensation usually seem underexposed or overexposed.
Page 936 direction to set Tv/Av Dial turning direction when setting the shutter speed and aperture value can be reversed. Reverses the turning direction of the < >, < >, and < > dial in [ ] shooting mode and only the < >...
Page 937 Customize buttons You can assign frequently used functions to camera buttons that are easy for you to use. Different functions, for use when shooting still photos or movies, can be assigned to the same button. Select [ : Customize buttons]. Select a camera control.
Page 938 Note : Customize buttons] settings are not cleared even if you select [ : Clear all Custom Func. (C.Fn)]. To clear the settings, select [ : Clear customized settings].
Page 939 Functions available for customization ●: Default ○: Available for customization Function ○ ○ ○ ○ ○ ○ ● ○ Start/stop tracking ○ ● ○ ○ ○ ○ ○ Metering and AF start ○ ○ ○ ○ ○ ○ ● ○ ○...
Page 940 One-Shot ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Servo AF ○ ○ ○ ○ ○ ○ Move AF point by eye control Moving AF ○ ○ ○ ○ ○ ○ point, start AF by eye ctrl ○...
Page 941 Exposure Compensation ●: Default ○: Available for customization Function ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ AE lock, AF stop ○ ○ Metering start ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ AE lock ○ ○...
Page 942 Set ISO ○ ○ ○ ○ ○ ○ ○ speed(hold btn,turn ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Flash firing ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ FE lock * 1: Cannot be assigned as a function available in movie recording. * 3: Default in movie recording.
Page 943 Image ●: Default ○: Available for customization Function ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Image size selection One-touch ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ image quality setting One-touch ○ ○ ○...
Page 944 Movies ●: Default ○: Available for customization Function ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Zebra ● ○ ○ ○ ○ ○ ○ ○ ○ Movie recording ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○...
Page 945 Operation...
Page 946 ●: Default ○: Available for customization Function ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Flash function settings ○ ○ ○ ○ ○ ○ ○ ● ○ ○ ○ Dial function settings Cycle ○ ○ ○ ○ ○...
Page 947 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Switch focus/ control ring Switch to ○ Custom shooting mode ○ ○ ○ ○ ○ ● ○ ○ ○ ○ ○ Depth-of- field preview Reset ○ ○ ○ ○ ○...
Page 948 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Touch Shutter ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Create folder ○ OVF sim. view assist Maximize ○ ○ ○ ○ ○ ○ ○ ○ ○...
Page 949 ○ ○ ○ ○ ○ ○ ○ ○ ○ Rating button ○ ○ ○ ● ○ ○ ● ○ ○ ○ ○ ○ ○ No function (disabled) * 1: Cannot be assigned as a function available in movie recording. * 3: Default in movie recording. * 4: Default in still photo shooting.
Page 950 Customize dials Frequently used functions can be assigned to the < >/< >/< >/< > dials. Select [ : Customize dials]. Select a camera control. Select a function to assign. Press < > to set it. You can configure advanced settings for functions labeled with ] in the lower left of the screen by pressing the <...
Page 951 Note : Customize dials] settings are not cleared even if you select [ : Clear all Custom Func. (C.Fn)]. To clear the settings, select [ : Clear customized settings].
Page 952 Functions available for dials ●: Default ○: Available for customization Function Select AF area ○ ○ ○ Direct AF point selection ○ ○ AF area (hold metering button) ○ Change shutter speed ○ Change aperture value ○ Exposure compensation ○ ○...
Page 953 Note The < > dial cannot be customized in [ ] mode. < >: Control ring on RF lenses and mount adapters.
Page 954 Clear customized settings Select [ : Clear customized settings]. Select [OK]. [Customize buttons] and [Customize dials] are restored to defaults.
Page 955 switching ( You can change the functionality of the still photo shooting/movie recording switch. The movie recording screen is not displayed with this function set to [Silent shutter function switching] or [Disable]. Pressing the movie shooting button starts recording a movie as specified for Custom shooting mode [ : Still photo/movie recording : Silent shutter function switching...
Page 956 Vertical shooting controls To prevent unintended operations, you can disable vertical shooting controls – buttons, dials, and the Multi-controller and smart controller near the bottom of the camera. ON: On OFF: Off LOCK: Disable using lock Setting the multi-function lock switch to < >...
Page 957 Add cropping information Adding cropping information displays vertical lines for the aspect ratio specified in shooting, so that you can compose shots as if shooting with a medium- or large-format camera (6×6 cm, 4×5 inch, and so on). When you shoot, instead of cropping images recorded to the card, the camera adds aspect ratio information to images for cropping in the Digital Photo Professional (EOS software).
Page 958 Shutter release time lag Normally, the camera controls shooting so that the shutter-release time lag is consistent, but by setting [Shortened], you can disable this control to shorten the shutter-release time lag. : Standard : Shortened Caution Shutter-release time lag varies by shooting conditions, type of lens, aperture value, and other factors.
Page 959 Default Erase option You can set which option is selected by default in the erase menu ( ), which is accessed by pressing the < > button during image playback or during review after shooting. By setting an option other than [Cancel], you can simply press < >...
Page 960 Retract lens on power off You can set whether to retract gear-type STM lenses (such as RF35mm F1.8 Macro IS STM) automatically when the camera's power switch is set to < >. ON: Enable OFF: Disable Caution With auto power off, the lens will not retract regardless of the setting. Before detaching the lens, make sure that it is retracted.
Page 961 Note During playback, you can check whether IPTC information was added. You can use Digital Photo Professional (EOS software) to check IPTC information in images. IPTC information registered to the camera is not erased if you select [ : Clear all Custom Func.
Page 962 Clear all Custom Func. (C.Fn) Selecting [ : Clear all Custom Func. (C.Fn)] clears all Custom Function settings except the following functions. Customize buttons Customize dials switching ( Smart controller Note To clear settings configured with [ : Customize buttons] and [ : Customize dials], select [ : Clear customized settings].
Page 963: Tab Menus: My Menu
Tab Menus: My Menu Add My Menu tab Delete all My Menu tabs Delete all items Menu display...
Page 964: Registering My Menu
Registering My Menu Creating and Adding My Menu Tabs Registering Menu Items on My Menu Tabs My Menu Tab Settings Deleting All My Menu Tabs/Deleting All Items Menu Display Settings On the My Menu tab, you can register menu items and Custom Functions you often adjust. Creating and Adding My Menu Tabs Select [Add My Menu tab].
Page 965 Registering Menu Items on My Menu Tabs Select [MY MENU*: Configure]. Select [Select items to register]. Register the desired items. Select an item, then press < >. Select [OK] on the confirmation screen. You can register up to six items. To return to the screen in step 2, press the <...
Page 966 My Menu Tab Settings You can sort and delete items on the menu tab, and rename or delete the menu tab itself. Sort registered items You can change the order of the registered items in My Menu. Select [Sort registered items], select an item to rearrange, then press <...
Page 967 Rename tab You can rename the My Menu tab from [MY MENU*]. Select [Rename tab]. Enter text. Use the < > or < > dial or < > to select a character, then press < > to enter it. By selecting [ ], you can change the input mode. To delete single characters, select [ ] or press the <...
Page 968 Deleting All My Menu Tabs/Deleting All Items You can delete all the created My Menu tabs or My Menu items registered on them. Delete all My Menu tabs You can delete all My Menu tabs you created. When you select [Delete all My Menu tabs], all the tabs from [MY MENU1] to [MY MENU5] will be deleted and the [ ] tab will revert to its default.
Page 969 Menu Display Settings You can select [Menu display] to set the menu screen that is to appear first when you press the < > button. Normal display Displays the last displayed menu screen. Display from My Menu tab Displays with the [ ] tab selected.
Page 970: Reference
Reference This chapter provides reference information on camera features. • Importing Images to a Computer • Using an Optional USB Power Adapter to Charge the Camera • Troubleshooting Guide • Error Codes • ISO Speed in Movie Recording • Information Display •...
Page 971: Importing Images To A Computer
Importing Images to a Computer Connecting to a Computer with an Interface Cable Using a Card Reader Connecting to a Computer via Wi-Fi You can use EOS software to import images from the camera to a computer. There are three ways to do this. If you will import many images, consider using a household power outlet accessory (sold separately).
Page 972 Using a Card Reader You can use a card reader to import images to a computer. Install Digital Photo Professional ( Insert the card into the card reader. Use Digital Photo Professional to import the images. Refer to the Digital Photo Professional Instruction Manual. Note When downloading images from the camera to a computer with a card reader without using EOS software, copy the DCIM folder on the card to the computer.
Page 973 Connecting to a Computer via Wi-Fi You can connect the camera to the computer via Wi-Fi and import images to the computer Note By connecting to an FTP server, you can send images on the camera to a computer (...
Page 974: Using An Optional Usb Power Adapter To Charge The Camera
Using an Optional USB Power Adapter to Charge the Camera Using USB Power Adapter PD-E1 (sold separately), you can charge Battery Pack LP-E19 without removing it from the camera. Connect the USB power adapter. With the camera power switch set to < >, insert the USB power adapter plug fully into the <...
Page 975 For safety, charging in low temperatures takes longer. The camera cannot be powered with USB Power Adapter PD-E1. Some commercially available power adapters have been confirmed to charge and power the camera. For details, check the Canon website.
Page 976: Troubleshooting Guide
Computer connection problems Problems with the multi-function shoe If a problem occurs with the camera, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, take the camera to the nearest Canon Service Center. Power-related problems Batteries cannot be charged with the battery charger.
Page 977 In this case, unplug the power cord, reattach the battery, and wait a few minutes before plugging it in again. If the problem persists, take the camera to the nearest Canon Service Center. The access lamp is not lit during charging with the USB power adapter.
Page 978 [Does this battery/do these batteries display the Canon logo?] is displayed. Do not use any battery packs other than a genuine Canon Battery Pack LP-E19. Remove and install the battery again ( If the electrical contacts are dirty, use a soft cloth to clean them.
Page 979 Shooting-related problems The lens cannot be attached. To attach EF or EF-S lenses, you will need a mount adapter. The camera cannot be used with EF-M lenses ( No images can be shot or recorded. Make sure the card is properly inserted ( Slide the card's write-protect switch to the Write/Erase setting ( If the card is full, replace the card or delete unnecessary images to make space Shooting is not possible if the AF point turns orange when you attempt to focus.
Page 980 / Number of possible shots / Maximum burst for continuous shooting is based on the standard Canon test card, and the actual maximum burst is higher for cards with faster writing speeds. For this reason, estimated maximum burst may differ from actual maximum burst.
Page 981 Expanded ISO speeds cannot be selected for still photo shooting. Expanded ISO speeds are not available when [ : Highlight tone priority] is set to [Enable] or [Enhanced]. Expanded ISO speeds are not available when [ : HDR shooting ] is set to [Enable].
Page 982 The flash always fires at full output. Flash units other than EL/EX series Speedlites used in autoflash mode always fire at full output ( When the flash Custom Function setting for [Flash metering mode] is set to [TTL flash metering] (autoflash), the flash will always fire at full output ( Flash exposure compensation cannot be set.
Page 983 Movie recording stops by itself. If the card's writing speed is slow, movie recording may stop automatically. For details on cards that can record movies, see Card performance requirements. To find out the card's writing speed, refer to the card manufacturer's website, etc. Perform low-level formatting to initialize the card if the card's writing or reading speed seems slow ( Movie recording stops automatically if you record a high frame rate movie for 89 min.
Page 984 The subject looks distorted during movie recording. If you move the camera to the left or right (panning) or shoot a moving subject, the image may look distorted. Sound is not recorded in movies. Sound is not recorded in High Frame Rate movies. A time code is not added.
Page 985 Problems with wireless features Cannot pair with a smartphone. Use a smartphone compliant with Bluetooth Specification Version 4.1 or later. Turn on Bluetooth from the smartphone settings screen. Pairing with the camera is not possible from the smartphone's Bluetooth settings screen. Install the dedicated app Camera Connect (free of charge) on the smartphone ( Pairing with a previously paired smartphone is not possible if pairing information registered for another camera remains on the smartphone.
Page 986 Operation problems Settings change when I switch from still photo shooting to movie recording or vice versa. Separate settings are retained for use when shooting still photos and recording movies. Settings cannot be changed with < >, < >, < >, <...
Page 987 Display problems The menu screen shows fewer tabs and items. Tabs and items on the menu screen vary for still photos and movies. The display starts with [ ] My Menu, or the [ ] tab alone is displayed. [Menu display] on the [ ] tab is set to [Display from My Menu tab] or [Display only My Menu tab].
Page 988 The screen does not display a clear image. If the screen is dirty, use a soft cloth to clean it. The screen display may seem slightly slow in low temperatures or may look black in high temperatures, but it will return to normal at room temperature.
Page 989 Playback problems Part of the image blinks in black. : Highlight alert] is set to [Enable] ( A red box is displayed on the image. : AF point disp.] is set to [Enable] ( During image playback, the AF points are not displayed. AF points are not displayed when the following types of images are played back: •...
Page 990 Movie playback stops by itself. Extended movie playback or movie playback under high ambient temperature may cause the camera's internal temperature to rise, and movie playback may stop automatically. If this happens, playback is disabled until the camera's internal temperature decreases, so turn off the power and let the camera cool down a while.
Page 991 Images cannot be resized or cropped. This camera cannot resize JPEG images, RAW images, or frame-grab images from 4K movies saved as still photos ( This camera cannot crop RAW images or frame-grab images from 4K movies saved as still photos ( Dots of light appear on the image.
Page 992 Sensor cleaning problems The shutter makes a sound during sensor cleaning. Although there is a mechanical sound from the shutter during cleaning after [Clean now ] is selected, no image is recorded to the card ( Automatic sensor cleaning does not work. Repeatedly turning the power switch <...
Page 993 If you cannot remove the dirt or moisture, contact a Canon Service Center. If [Accessory unavailable status] is displayed, check the terminals of the multi-function...
Page 994: Error Codes
Error Codes (1) Error number (2) Cause and countermeasures If there is a problem with the camera, an error message will appear. Follow the on-screen instructions. If the problem persists, write down the error code (Err xx) and request service.
Page 995: Iso Speed In Movie Recording
). The maximum limit is not expanded, even when expansion is set in [Max for Auto]. The minimum speed in the automatic setting range is ISO 800 when [ : Canon Log settings] is set to [On ( )] ( ).
Page 996: Information Display
Information Display LCD Panel Still Photo Shooting Screen Movie Recording Screen Playback Screen LCD Panel Still photo/movie standby screen 1 Eye control Shooting mode Battery level Flash exposure compensation Exposure compensation Bluetooth function Wi-Fi /wired LAN Shutter speed Aperture value (10) Exposure level indicator/Exposure compensation amount/AEB range (11)
Page 997 Still photo/movie standby screen 2 AF area Drive mode AF operation Metering mode Card slot Movie recording mode White balance Picture Style Movie recording size (10) Movie recording format...
Page 998 Movie standby screen 3 AF area Image Stabilizer (IS mode) Card slot White balance Picture Style/Canon Log Movie recording time available...
Page 999 Movie recording in progress Movie recording mode Battery level Recording in progress/External recording in progress (10-bit, via HDMI) Elapsed recording time...
Page 1000 Still Photo Shooting Screen Each time you press the < > button, the information display will change. The display will show only the settings currently applied. 1000...
Page 1001 Maximum burst Number of available shots/Sec. until self-timer shoots Focus bracketing/HDR/Multiple exposures/Multi Shot Noise Reduction/Bulb timer/Interval timer Shooting mode AF area AF operation Card Image quality Drive mode (10) Metering mode (11) Accessory compatible with the multi-function shoe attached (12) No.

Canon EOS R3 Advanced User's Manual

Introduction

Preparation and Basic Operations

Shooting Mode

Shooting and Recording

Af/Drive

Playback

Communication Functions

Set-Up

Custom Functions/My Menu

Reference

Trademarks and Licensing

Quick Links

Troubleshooting

Related Manuals for Canon EOS R3

Summary of Contents for Canon EOS R3