Panasonic WX-ST600P Operating Instructions Manual
Wireless transmitter and microphone
Hide thumbs
Also See for WX-ST600P:
- Operating instructions manual (92 pages) ,
- Operating instructions manual (79 pages)
Table of Contents
Advertisement
Quick Links
WX-ST600P
Before attempting to connect or operate this product, please read these instructions
carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
Operating Instructions
Wireless Transmitter
Model No.
Wireless Microphone
Model No.
WX-ST600P
WX-ST700P
WX-ST700P
PUQX1047ZA
Advertisement
Table of Contents
Related Manuals for Panasonic WX-ST600P
Summary of Contents for Panasonic WX-ST600P
- Page 1 Operating Instructions Wireless Transmitter WX-ST600P Model No. Wireless Microphone WX-ST700P Model No. WX-ST600P WX-ST700P Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual.
-
Page 2: Safety Precautions
A nickel metal hydride battery Supplier’s Declaration of that is recyclable powers the conformity product you have purchased. Trade Name: Panasonic Please call 1-800-8-BATTERY Model No.: WX-ST600P for information on how to WX-ST700P recycle this battery. Responsible Party: Panasonic Corporation of North America... - Page 3 For U.S.A. For U.S.A. NOTE: This equipment has been tested The model number and serial number of and found to comply with the limits for a this product may be found on the surface Class A digital device, pursuant to part of the unit.
- Page 4 Safety precautions IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Page 5: Before Use
Before use Product overview This product is a desktop wireless microphone. ● It uses a system based on the 1.9 GHz DECT* standard to achieve a stable connection over a wide area which makes for a clear audio with little interference. * DECT (Digital Enhanced Cordless Telecommunications) is a digital cordless communication standard. -
Page 6: Disclaimer Of Warranty
Before use Disclaimer of Warranty IN NO EVENT SHALL Panasonic Connect Co., Ltd. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW: A ANY LOSS OR DAMAGE, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;... -
Page 7: Abbreviations
Abbreviations This manual uses the following abbreviations. ● “Wireless Transmitter (WX-ST600P)” and “Wireless Microphone (WX-ST700P)” are referred to as “this product”, “the product” or “microphone”. ● “Charger (WX-SZ600P: sold separately)” is referred to as “charger”. ● “Wireless Antenna (WX-SA250P: sold separately)” is referred to as “wireless antenna” or “antenna”. -
Page 8: Table Of Contents
Usage precautions ……………………………………………………………………………… 11 Parts and their names ………………………………………………………………………… 13 WX-ST600P ………………………………………………………………………………………… 13 WX-ST700P ………………………………………………………………………………………… 14 Connecting a gooseneck microphone (WX-ST600P only) ……………………………… 18 Inserting the batteries ………………………………………………………………………… 19 Connecting a USB power adaptor …………………………………………………………… 21 Setting the microphone sensitivity ………………………………………………………… 22 Pairing ……………………………………………………………………………………………... -
Page 9: Precautions
Precautions Only use the original charger or power supply adapter specified by the manufacturer Failing to do so may lead to leaks, overheating, and bursts. Only recharge rechargeable Ni-MH batteries Failing to do so may lead to leaks, overheating, and bursts in the batteries. Turn the power OFF when boarding airplanes Failing to do so may lead to safety concerns for the aircraft. - Page 10 Precautions Do not perform maintenance while the product is powered ON It may lead to injury. Refer to a professional for disposal Burning the product may lead to harmful chemicals causing damage to the eyes, and it could pose a fire hazard or burn risk. Insert the batteries according to the correct polarity (positive + / negative -) Failing to do so may cause the batteries to leak or burst, leading to fires, injuries, and damage to the surroundings.
-
Page 11: Usage Precautions
Usage precautions Other than the aforementioned “Precautions”, make sure to follow the points below. This product is intended for indoor use only ● It cannot be used outdoors. Avoid exposing the product to direct sunlight for extended periods of time, and do not install it near air conditioners or heaters. - Page 12 Usage precautions Batteries ● Even when the power is turned OFF, batteries left inside the product will slowly be drained. Remove the batteries when you are not using the product, as failing to do so may cause battery leaks. ● Do not use or store batteries in hot places, such as under direct sunlight, inside closed- off cars during the summer, near open fires, stoves, etc.
-
Page 13: Parts And Their Names
Parts and their names WX-ST600P Side Side Bottom Bottom (Battery cover removed) INPUT LEVEL METER OFF/ON INPUT LEVEL METER OFF/ON PTT OFF/ON PTT OFF/ON SENS L/H SENS L/H INPUT LEVEL METER OFF/ON T OFF/ON... -
Page 14: Wx-St700P
Parts and their names WX-ST700P Side Side Bottom Bottom (Battery cover removed) INPUT LEVEL METER OFF/ON INPUT LEVEL METER OFF/ON PTT OFF/ON PTT OFF/ON SENS L/H SENS L/H INPUT LEVEL METER OFF/ON T OFF/ON... - Page 15 : Microphone unpaired or failed to pair with a receiver ● See “Pairing” (page 24). Alternately blinking (orange/green) : Confirming pairing 5 M icrophone connector (WX-ST600P only) The connector into which the gooseneck microphone is plugged. 6 M icrophone unit (WX-ST700P only) Collects audio. 7 T alk indicator Indicates the talk status.
- Page 16 Parts and their names 8 I nput level meter This indicates the audio level being input to the microphone unit when the status of the product is “talking”. This can be switched ON/OFF with the input level meter setting switch ( o ). On (red) : Loud.
- Page 17 E xternal input connector Transmits the audio from the external device to the receiver (page 32). Audio is not sent from the gooseneck microphone (WX-ST600P) or built-in microphone (WX-ST700P) when an external device is connected to this connector. Stereo audio will become monaural.
-
Page 18: Connecting A Gooseneck Microphone (Wx-St600P Only)
Connecting a gooseneck microphone (WX-ST600P only) Gooseneck Microphone (WM-KG645: sold separately) Power switch Confirm that the power switch is set to “OFF”. Insert the gooseneck microphone. ● When moving with the microphone connected, hold by the product. If you lift by the gooseneck microphone, there is a risk that the product Important may fall. -
Page 19: Inserting The Batteries
If the battery poles become dirty, clean them with a dry, soft cloth. Power switch * This illustration shows the WX-ST600P. Battery cover Confirm that the power switch is set to “OFF”. Remove the battery cover... - Page 20 ● Some batteries may not perform well with this product. If possible, use one of the recommended batteries. The recommended batteries are as follows. Rechargeable battery: BK-3MCCA Panasonic Ni-MH AA-size battery Dry-cell batteries: LR6PA Panasonic alkaline AA-size battery LR6XE Panasonic alkaline AA-size battery...
-
Page 21: Connecting A Usb Power Adaptor
Connecting a USB power adaptor Carefully read the “Precautions” section and follow all of its instructions. When connecting a USB power adaptor, connect when the power of this product is off. * This illustration shows the WX-ST600P. To AC120 V 60 Hz... -
Page 22: Setting The Microphone Sensitivity
Sets the sensitivity to audio collected by the microphone unit. INPUT LEVEL METER OFF/ON PTT OFF/ON SENS L/H Power switch * This illustration shows the WX-ST600P. Battery cover Confirm that the power switch is set to “OFF”. Remove the battery cover Press on the portion labeled as on the bottom of the battery cover and slide the cover in the indicated direction to remove it. - Page 23 Important ● Changing this setting while the microphone is turned ON could lead to noise. Confirm that power is “OFF” before changing the setting. Important ● When 2 green indicators are on, the volume when you are talking towards the microphone is acceptable. ●...
-
Page 24: Pairing
Pairing The microphone and the receiver must be paired to each other in order to establish a connection. Perform pairing when using a microphone which has not yet been paired to the receiver or when a registration error occurs. The maximum number of microphones which can be paired to a receiver and the maximum number of microphones which can be used simultaneously is as follows. -
Page 25: Pairing With The Wx-Sr202P / Wx-Sr204P / Wx-Se200P (Wireless Connection)
Q Pairing with the WX-SR202P / WX-SR204P / WX-SE200P (wireless connection) Pair the microphone to a wireless antenna via a wireless connection. Perform the pairing within the connection range of the wireless antenna connected to the wireless receiver / extension receiver to which you want to pair the microphone. Remove the battery cover Press on the portion labeled as on the bottom of... - Page 26 Status indicator Register button INPUT LEVEL METER OFF/ON T OFF/ON * This illustration shows the WX-ST600P. Important Place the battery cover back on Place the battery cover back onto the product. ● While the microphone is in use, the [REG] button of the corresponding channel on the wireless receiver or extension receiver is disabled.
-
Page 27: Pairing Via Usb Cable Connection
Important Q Pairing via USB cable connection This product (WX-ST600P / WX-ST700P) cannot be paired via a USB cable (wired) connection. ● This product can also be used in the conference mode, which enables talking if there are available channels apart from the registered channels. -
Page 28: Confirming Pairing
With the microphone powered on, press the [REG] button once to enter pairing confirmation mode (the status indicator will turn green and orange alternately for five seconds). Status indicator Register button INPUT LEVEL METER OFF/ON T OFF/ON * This illustration shows the WX-ST600P. - Page 29 Check the [REG] indicator on the receiver While the microphone is in pairing confirmation mode, the [REG] indicator of the paired channel on the wireless receiver / extension receiver will turn green and orange alternately. This allows to confirm the pairing. The pairing confirmation mode lasts for five seconds, after which the devices will go back to their normal operation mode.
-
Page 30: Using The Microphone
The status indicator on the microphone lights up. Status indicator Power switch * This illustration shows the WX-ST600P. Important ● If the status indicator on the microphone blinks red, the microphone is not paired to a wireless receiver / extension receiver. Perform the steps... - Page 31 The talk indicators on the product light green and the audio collected by the microphone unit is amplified. Talk indicator Talk indicator * This illustration shows the WX-ST600P. Talk button ● After use, turn OFF the microphone. Slide the power switch to the [OFF] position to turn the microphone OFF. The status indicator goes off.
-
Page 32: Connecting An External Device
Music player, etc. (locally procured) Ø3.5 mm stereo mini plug * This illustration shows the WX-ST600P. Turn OFF the microphone and the external device Connect the external device Use a Ø3.5 mm stereo mini plug to connect the audio output from the external device (eg: music player) to the external input connector. -
Page 33: Replacing The Batteries
Remove the batteries when you are not using the microphone for an extended period of time, as failing to do so may cause battery leaks. Power switch * This illustration shows the WX-ST600P. Battery cover Confirm that the power switch is set to “OFF”. Remove the battery cover... - Page 34 ● Some batteries may not perform well with this product. If possible, use one of the recommended batteries. The recommended batteries are as follows. Rechargeable battery: BK-3MCCA Panasonic Ni-MH AA-size battery Dry-cell batteries: LR6PA Panasonic alkaline AA-size battery LR6XE Panasonic alkaline AA-size battery...
-
Page 35: Recharging The Batteries
Q Recharging with a charger Refer to the operating instructions for WX-SZ600P. Q Recharging with a USB power adaptor Carefully read the “Precautions” section and follow all of its instructions. * This illustration shows the WX-ST600P. To AC120 V 60 Hz electric outlet... - Page 36 Recharging the batteries ● Use only the dedicated charger (WX-SZ600P) when charging with a charger. Important ● The [CHARGE] indicator on the charger blinks red if you try to recharge while there is an obstruction between the product and the charger, and then the indicator lights red.
- Page 37 Important ● The charger automatically recognizes the dry-cell batteries inside the microphone to cancel charging, and then the charge indicator will blink. However, depending on the type of dry-cell battery, this automatic recognition may take some time and the charge indicator stay lit until the recognition completes.
-
Page 38: Troubleshooting
Troubleshooting Please check the common problems listed in this table before seeking professional help. If none of the tips provided here help, if you are dealing with a problem not listed here, or if you are otherwise uncertain, contact your retailer for more information. Reference Phenomenon Cause/measure... - Page 39 Reference Phenomenon Cause/measure page Audio from the ● Is an external device connected to the external microphone unit is not input connector? transmitted ¨ When an external device is connected, even ¨ if it is turned OFF, it will take precedence over the microphone unit, which will stop audio transmission from the microphone unit.
- Page 40 Troubleshooting Reference Phenomenon Cause/measure page I cannot charge the ● The batteries inside the microphone may be microphone dry-cell batteries or deteriorated rechargeable (The charge indicator batteries. blinks) ¨ Make sure that the proper type of batteries ¨ are inserted. ●...
-
Page 41: Specifications
Connector for charge USB Type-C (Battery charging and power supply to (USB Type-C) WX-ST600P) * WX-ST600P can be used when powered by USB Type-C Use a USB power adapter of DC 5 V 500 mA or more for power supply Battery type Rechargeable battery: Ni-MH AA-size battery (sold separately) ×... - Page 42 AA-size battery (sold separately) × 2 Battery operating time Approx. 13 hours (Ni-MH AA-size battery BK-3MCCA) Assuming continuous use at a 25 °C (77 °F) temperature with Panasonic batteries Front indicator Talk indicator Input level meter (4 steps) Charge indicator (when using the charger)
-
Page 43: Standard Accessories
Standard accessories Operating Instructions (this booklet) ..................1 Warranty Card ........................1 Microphone identification sticker ...................1 USB charging cable: About 0.5 m (Input: USB Type-A, Output: Type-C)................1... - Page 44 Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 https://na.panasonic.com/us/ © Panasonic Connect Co., Ltd. 2022 Fv0722-0 PUQX1047ZA Printed in Vietnam...