Samsung KMC-W, KM24C-3 Quick Setup Guide

Also See for KMC-W:

User manual (35 pages)

Table of Contents

Contents

1 Introduction
2 Ports
3 Checking the Components
4 Specifications
5 Wall Mount Kit Specifications
6 Documents / Resources
- 6.1 Download manual

Samsung KMC-W, KM24C-3 Quick Setup Guide

Introduction

Recommended hours of use per day of this product is under 16 hours. If the product is used for longer than 16 hours a day, the warranty may be void.
The colour and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.

Ports

To access the display ports, you must disassemble the display from the Connection Box.
Ports

Port	Description
DC20V	This port is for connecting the display's power adapter.
TOUCH	This port is not a functioning port. It is only used for an operation test during the manufacturing process.
(SERVICE)	Connects to a USB device. * The USB ports on the product accept a maximum constant current of 1.0 A. If the maximum value is exceeded, USB ports may not work.
ONE CONNECT	Connects the display and the Connection Box using an OCM cable.

Checking the Components

Display: Quick Setup Guide / Warranty card (Not available in some locations) / Regulatory guide / Power cord / Power adapter
Connection box: Power strip / OCM cable / Screw(M4, L12) x 7 / Screw(M3, L5) x 11 / Screw(M3, L8) x 2 / Sheet cover x 2 / EFT Terminal cover holder / EFT Terminal holder guide

Contact the vendor where you purchased the product if any components are missing.
Components may differ in different locations.
The Kiosk stand is not provided. You must separately purchase and install the stand.

Specifications

Model Name		KMC-W (KM24C-3)
Panel	Size	24 CLASS (23.8 inches / 60.4 cm)
Panel	Display area	527.04 mm (H) x 296.46 mm (V)
Power Supply		AC100-240V~ 50/60Hz Refer to the label at the back of the product as the standard voltage can vary in different countries.
Environmental considerations	Operating	Temperature: 0°C – 40°C (32°F – 104°F) Humidity: 10% – 80%, non-condensing
Environmental considerations	Storage	Temperature: -20°C – 45°C (-4°F – 113°F) Humidity: 10% – 90%, non-condensing

* This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
* For detailed device specifications, visit the Samsung website.

Wall Mount Kit Specifications

Wall Mount Kit Specifications
Disassemble the rear cover of the Connection Box, remove the sheets covering the VESA holes by pressing them with a pen from the inner side of the rear cover, and then install the wall-mount bracket.