Safety Warnings CAUTION This symbol indicates that dangerous voltage which RISK OF ELECTRIC SHOCK. can cause electric shock is present inside this unit. DO NOT OPEN This symbol alerts you to important operating and CAUTION: maintenance instructions accompanying the unit. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER.
√√ What is AV receiver? It refers to home theater exclusive amplifier by amplifying the audio signal from DVD and CD player as a core element of home theater. √√ Let's find out difference between general amplifier and AV receiver! General Amplifier AV Receiver 2 channels (left speaker and right speaker) Multiple Channel (5.1 channel by default)
Description [ Front Panel ] HEADPHONE Jack POWER STANDBY Indicator EXTERNAL AUDIO INPUT CONNECTOR POWER button EXTERNAL VIDEO INPUT CONNECTOR REMOTE CONTROL Sensor EXTERNAL OPTICAL DIGITAL AUDIO INPUT CONNECTOR [ Display ] DTS ES 96/24 LIVE SURROUND INDICATOR INDICATOR SPEAKER INDICATOR DOLBY DIGITAL EX NEO:6 INDICATOR...
VOLUME CONTROL button MENU button ANALOG/DIGITAL button Direct Function Select button Number(0~9) buttons Insert Remote Batteries TV Indicator VCR Indicator AV RECEIVER Indicator Remove the battery DVD Indicator cover on the back of MODE button MO/ST button the remote by SUBWOOFER button...
Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Position of AV Receiver • Place AV Receiver on the dedicated stand or chest of living room or under the TV stand properly.
Connecting External Components Connecting Video Component Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Video Player Video Projector DIGITAL AUDIO VIDEO S-VIDEO AUDIO AUDIO VIDEO S-VIDEO DVD Player Caution! • Disconnect the power plug from the outlet if you do not use this unit for long period of time.
Connecting External Component Connecting Audio Component/ 5.1 Channel Before moving or installing the product, be sure to turn off the power and disconnect the power cord. CD Player DIGITAL AUDIO CENTER FRONT SURR. WOOFER DVD or 5.1 Channel Player Connecting the FM and AM Antennas If AM reception is poor, connect an outdoor AM antenna(not supplied).
You can operate DVD after DVD indicator blinking. You can operate AV Receiver after AV Receiver indicator blinking. Basic operation of remote control is set up based on Samsung products. • Refer to page 45~48 for more details on operation method.
Setting the Speaker Before moving or installing the product, be sure to turn off the power and disconnect the power cord.Signal outputs and frequency response from the speaker will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not. REMOTE CONTROL Press SPK SEL.
Setting the Speaker REMOTE CONTROL Press the SPEAKER DISTANCE button to select the speaker you want. Each time you press this button, F.L • DISTANCE OFF will be selected in turn. Press …† button to set the speaker distance. • For F.L, CEN, F.R, S.W Speaker, you can set the distance from the speaker to listening position between 0.0~1.5m at the interval of 0.3m.
Setting DRC (Dynamic Range Compression) You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. MAIN UNIT Press and hold SURROUND button for about 5 seconds. “SETUP MODE” appears on the display and enters into Setup Mode. •...
Test Tone Use test tone to check speaker connection status or defect of speaker or adjust the level. To Automatically Output Test Tone MAIN UNIT Press and hold SURROUND button for about 5 seconds. “SETUP MODE” appears on the display and enters into Setup Mode. •...
Setting Speaker Level You can set the balance and level of speakers Remote Control Press SPK LEVEL button to select the speaker you want. Each time you press this button, F.L • SPK LEVEL OFF will be selected in turn. Press …†...
Dolby Pro Logic llx Mode You can experience surround sound regardless of type of stereo mix by making existing Dolby Surround mix sound similar to discrete 5.1 Channel Surround. REMOTE CONTROL Press • Each time you press this button, MUSIC PROLOGIC will be selected in turn.
Dolby Pro Logic llx Effect This function works only in Dolby PRO LOGIC IIX MUSIC Mode. REMOTE CONTROL Press Press Each time you press this button, C-WIDTH • selected in turn. Press …† button to select Dolby Pro Logic IIx effect you want. •...
NEO:6 Mode You can play back 2 channel sound in 6.1 channel of 360 degree surround when enjoying music or movie. REMOTE CONTROL Press NEO:6 MODE button. Each time you press this button, MUSIC • To Exit Setup Mode Wait for about 5 seconds. •...
SFE Mode Refer to the unique sound existing at specific place and you can feel live sound as if you are listening at actual site. REMOTE CONTROL Press SEF MODE button. • Each time you press this button, LIVE HALL CINEMA To Exit Setup Mode Wait for about 5 seconds.
EX/ES Mode This mode enable you to listen 6.1 channel surround to the source encoded to Dolby Digital-EX, DTS-ES such as DVD. This function works when Dolby Digital 5.1 channel source is inputted, and does not work when LPCM and Dolby Digital 2 channel source are entered.
Stereo Mode You can select this mode when you listen to the sound at Front-Left speaker, Front-Right speaker and subwoofer. REMOTE CONTROL MAIN UNIT Press STEREO button. Press SURROUND button briefly to select • “STEREO” appears in the display and Stereo Mode is ‘STEREO’.
Listening to Radio You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning operation. REMOTE CONTROL MAIN UNIT Press TUNER button. Each time you press this button, FM AM will be repetitively •...
About RDS broadcasting Using the RDS (Radio Data System) to receive FM stations RDS allows FM stations to send an additional signal along with their regular program signals. For example,the stations send their station names,as well as information about what type of program they broadcast, such as sports or music,etc.
Convenient Functions Sleep Timer Function You can set the time that this unit will shut itself off. REMOTE CONTROL Press the SLEEP button. SLEEP : OFF • To Check Sleep Timer Press SLEEP button. • The remaining time before this unit will shut itself off is displayed on the display. •...
TV. • If you do not set the remote control with the code for your brand of TV, the remote control will work on a Samsung TV by default. TV Brand Code List Brand ADMIRAL (M.WARDS)
VCR (DVD). If you do not set the remote control with the code for your brand VCR (DVD), the remote control • work on a Samsung VCR (DVD) by default. VCR Brand Code List Brand ADMIRAL (M.WARDS)
Before Calling for Service Symptom Check Can't turn it on. Is the power code plugged into the outlet? • It does not work when the Isn’t the air too dry to cause • button is pressed. electrostatics? Are the speaker and external •...
Specifications Power Supply Standby Power Consumption Power Consumption GENERAL Weight Dimensions (W x H x D) Operating Temperature Range Operating Humidity Range Frequency Response Usable Sensitivity S/N Ratio FM TUNER Distortion Stereo Separation Tuner Output Level Frequency Response S/N Ratio AM TUNER Usable Sensitivity Distortion...