hit counter code
3M -Matic 200a Instructions And Parts List
  1. Manuals
  2. Brands
  3. 3M Manuals
  4. Food Saver
  5. 3M-Matic 200a
  6. Instructions and parts list

3M -Matic 200a Instructions And Parts List

Adjustable case sealer with accuglide 2+ taping heads
Hide thumbs Also See for 3M-Matic 200a:
Table of Contents

Advertisement

Quick Links

Download this manual
Instructions and Parts List
3M-Matic
200a
Adjustable
Case Sealer
with
AccuGlide 2+
Taping Heads
Serial No.
For reference, record machine serial number here.
3M Industrial Adhesives and Tapes
3M Center, Building 220-5E-06
St. Paul, MN 55144-1000
™
Type 39600
™
Important Safety
Information
BEFORE INSTALLING
OR OPERATING THIS
EQUIPMENT
Read, understand, and
follow all safety and
operating instructions.
Spare Parts
It is recommended you
immediately order the
spare parts listed in the
"Spare Parts/Service
Information" section.
These parts are expected
to wear through normal
use, and should be kept
on hand to minimize
production delays.
"3M-Matic"and "AccuGlide" are Trademarks of,
3M St. Paul, MN 55144-1000
Printed in U.S.A.
© 3M 2011 44-0009-1894-4 (C060311-NA)

Advertisement

Table of Contents
loading

Related Manuals for 3M 3M-Matic 200a

Summary of Contents for 3M 3M-Matic 200a

  • Page 1 Serial No. production delays. For reference, record machine serial number here. "3M-Matic"and "AccuGlide" are Trademarks of, 3M Industrial Adhesives and Tapes 3M St. Paul, MN 55144-1000 3M Center, Building 220-5E-06 Printed in U.S.A.
  • Page 2 This instruction manual covers safety aspects, handling and transport, storage, unpacking, preparation, installation, operation, adjustments, maintenance, troubleshooting, repair work and servicing plus parts list of the 3M-Matic 200a Adjustable case sealer. 3M Industrial Adhesives and Tapes 3M Center, Building 220-5E-06 St.

  • Page 3: Replacement Parts And Service Information

    (For example: Model 200a - Type 39600 - Serial Number 13282). Identification Plate 3M-Matic , AccuGlide and Scotch 3M Industrial Adhesives and Tapes ™ ™ ™ Trademarks of 3M Center, Building 220-5E-06 3M St.
  • Page 4 THIS PAGE IS BLANK...

  • Page 5: Table Of Contents

    TABLE OF CONTENTS - MANUAL 1: 200a Adjustable Case Sealer (For Taping Head Information - See MANUAL 2: AccuGlide™ 2+ Taping Heads - 2 inch) 200a Adjustable Case Sealer Page Cover Page Replacement Parts and Service Information ................ i - ii Table of Contents .........................
  • Page 6 THIS PAGE IS BLANK...
  • Page 7 TABLE OF CONTENTS (continued) 5. Shipment, Handling, and Storage 5.1 Packed Machine Shipment and Handling ................15 5.2 Overseas Shipment Packaging (Optional) ................15 5.3 Handling and Transportation of Uncrated Machine ............. 15 5.4 Machine Storage ......................... 15 6. Unpacking 6.1 Uncrating ..........................
  • Page 8 THIS PAGE IS BLANK...
  • Page 9 TABLE OF CONTENTS (continued) 12. Operation 12.1 Operator’s Correct Working Position ................25 12.2 Starting the Machine ......................25 12.3 Starting Production ......................25 12.4 Tape Replacement ......................25 12.5 Box Size Adjustment ......................25 12.6 Cleaning ...........................25 12.7 Table of Adjustments ......................25 12.8 Safety Devices Inspection ....................
  • Page 10 ABBREVIATIONS AND ACRONYMS LIST OF ABBREVIATIONS, ACRONYMS 3M-Matic - Trademark of 3M St. Paul, MN 55144- 1000 AccuGlide - Trademark of 3M St. Paul, MN 55144-1000 Scotch - Trademark of 3M St. Paul, MN 55144-1000 Drw. - drawing - for example Figure - exploded view fi...

  • Page 11: Introduction

    1-INTRODUCTION 1.1 Manufacturing Specifications / Description / Intended Use The 3M-Matic 200a Adjustable Case Sealer with AccuGlide 2+ Taping Heads is designed to apply a “C” clip of Scotch ® pressure-sensitive fi lm box sealing tape to the top and bottom center seam of regular slotted containers.

  • Page 12: How To Read And Use The Manual

    All the notes on safety measures or The manufacturer reserves the right to change the possible dangers are identifi ed by the symbol: product at any time without notice Publication © 3M 2011 44-0009-1894-4. 1.2.1 Importance of the Manual 1.2.4 How to Update the Manual in Case of...

  • Page 13: General Information

    2-GENERAL INFORMATION 2.1 Data Identifying Manufacturer and Machine For Commercial Use Only 2011 June 200a-NA...

  • Page 14: Warranty / Contents

    3M’s factory or an authorized service station designated by 3M. A part will be presumed to have become defective after its warranty period unless the part is received or 3M is notifi ed of the problem no later than fi...

  • Page 15: Safety

    3-SAFETY 3.1 General Safety Information 3.2 Explanation of Signal Word and Possible Consequences Read all the instructions carefully before starting work with the machine; please pay particular attention to sections marked by the symbol: This safety alert symbol identifi es important messages in this manual.

  • Page 16: Table Of Warnings

    3-SAFETY (continued) 3.3 Table of Warnings WARNING • To reduce the risk associated with mechanical and electrical hazards: − Read, understand, and follow all safety and operating instructions before operating or servicing the case sealer. Figure 3-2 − Allow only properly trained and qualifi...
  • Page 17 3-SAFETY (continued) WARNING • To reduce the risk associated with sharp blade hazards: − Keep hands and fi ngers away from WARNING tape cutoff blades under orange blade Sharp Blade guards. The blades are extremely sharp. Important! Tape cutting blade. Never remove the safety device which covers the blade on the top and bottom taping units.

  • Page 18: Operator's Qualifi Cations Defi Nition

    3-SAFETY (continued) 3.4 Operator's Qualifications WARNING - Machine Operator - Mechanical Maintenance Technician • To reduce the risk associated with - Electrical Maintenance Technician mechanical and electrical hazards: - Manufacturer’s Technician/Specialist − Read, understand, and follow all safety and operating instructions before operating or servicing the case sealer.

  • Page 19: Operator's Required Skill Levels

    3-SAFETY (continued) Skill 2a: Electrical Maintenance Technician 3.11 Operator's Skill Levels Required to Perform This operator is trained to use the machine as the the Main Operations on the Machine MACHINE OPERATOR and in addition is able to: • Work with the safety protection disconnected The Table shows the minimum operator's skill for •...

  • Page 20: Component Locations

    3-SAFETY (continued) 3.12 Component Locations Refer to Figure 3-9 below to acquaint yourself with the various components and controls of the case sealer. Also refer to Manual 2 for taping head components. Upper Taping Head Height Adjustment Emergency Handle Stop Switch Upper Head...

  • Page 21: Table Of Warnings And Replacement Labels

    3.13 Table of Warnings and Replacements Labels (continued) DOWN 78-8095-1628-8 78-8095-1141-9 78-8113-8912-9 (2) 78-8070-1336-8 78-8070-1366-5 78-8070-1318-6 78-8113-6717-2 78-8062-4266-1 78-8137-0886-0 78-8060-8481-6 Leg Height Adjustment Label (not shown) 78-8070-1339-2 3M Logo 78-8070-1329-3 (not shown) Figure 3-10 - Replacement Labels / 3M Part Numbers 2011 June 200a-NA...

  • Page 22: Power Requirements

    Electrical: 120 Volt, 60Hz, 2 A (240 watts) The machine is equipped with a 2.4m [8 foot] standard neoprene covered power cord and a grounded plug. Contact your 3M Representative for power requirements not listed above. 4.2 Operating Rate Up to 30 cases per minute, depending on box length. Box drive belt speed is approximately 0.38 m/s [75 feet per minute].

  • Page 23: Tape Roll Diameter

    4-SPECIFICATIONS (continued) Specifications 4.6 Tape Roll Diameter Up to 405mm [16 inch] maximum on a 76.2mm [2 inch] diameter core. (Accommodates all system roll lengths of Scotch ® fi lm tapes.) 4.7 Tape Application Leg Length – Standard 70 mm ± 6mm [2.75 inch ±. 25 inch ] Tape Application Leg Length –...

  • Page 24: Machine Dimensions

    4-SPECIFICATIONS (continued) Right Side Left Side Box Travel 10. Machine Dimensions Minimum 1350 [Inches] [31] [36 1/2] [53] [18] [24***] [24 1/2] Maximum 2185 [Inches] [86***] [35***] * Infeed/Exit conveyors are optional ** Casters are optional *** When columns are adjusted to upper position, "B" minimum/maximum dimension decreases by 90 mm [3 1/2 inches] and "H"...

  • Page 25: Handling And Transportation Of Uncrated Machine

    5-SHIPMENT-HANDLING-STORAGE, TRANSPORT 5.1 Shipment and Handling of Packed Machine - The machine is fi xed on the pallet with four (4) bolts and can be lifted by using a fork truck. - The package is suitable to travel by land and by air. - Optional sea freight package is available.

  • Page 26: Unpacking

    6-UNPACKING 6.1 Uncrating Removal of Pallet The envelope attached to the shipping box contains Using a 10mm combination wrench, remove the the uncrating instructions of the machine (Figure 6-1). fasteners that secure the case sealer legs to pallet at each leg (as shown in Figure 6-4). Figure 6-4 Figure 6-1 A package is located under the machine body.

  • Page 27: Installation

    7-INSTALLATION 7.1 Operating Conditions The machine should operate in a dry and relatively clean environment (See Specifi cations). 7.2 Space Requirements for Machine Operation and Maintenance Work Minimum distance from wall (Figure 7-1): A = 1000mm. B = 700mm. Minimum height = 2700mm. Figure 7-2 7.4 Machine Setup / Bed Height (See Specifi...

  • Page 28: Assembly Completion

    7-INSTALLATION (continued) 7.5 Removal of Plastic Ties Cut the plastic ties holding the lower taping head in position (Figure 7-6). Cut the plastic which attaches the top head to the frame and remove the polystyrene blocks (Figure 7-4). Figure 7-6 Figure 7-4 Cut the plastic strap which attaches the strip and the 7.6 Assembly Completion...

  • Page 29: Outboard Tape Roll Holder

    7-INSTALLATION (continued) 7.7 Completion of Taping Heads See Manual 2 for Complete Instructions: Important – Do not cut against the apply roller - roller damage could occur. Figure 7-8 7.8 Outboard Tape Roll Holder If you intend to use the outboard tape roll holder, proceed as follows: 7.10 Machine Connection to the Mains 1 - Remove the lower taping head from the machine.

  • Page 30: Theory Of Operation

    8-THEORY OF OPERATION 8.1 Description of the Working Cycle After having closed the top fl aps of the carton, the operator pushes it under the top infeed end in order to avoid the opening of the top fl aps. Further push- ing causes the two top and bottom belts to drive the box through the taping heads which automatically seal the top and bottom seams.

  • Page 31: Box Width Adjusting Knobs

    9-CONTROLS 9.1 Box Width Adjusting Knobs Figure 9-1 9.2 Box Height Adjusting Crank Figure 9-2 9.3 Start/Stop Buttons Start/Stop Button Figure 9-3 E-Stop Button 9.4 Lockable Emergency Stop Button Figure 9-4 200a-NA 2011 June...

  • Page 32: Emergency Stop Button (Latching)

    10-SAFETY DEVICES OF THE MACHINE 10.1 Blade Guards Both the top and bottom taping units have a blade guard. (See Manual 2: AccuGlide™ 2+ STD 2 Inch Taping Heads). Important! Use care when working near blades as blades are extremely sharp. If care is not taken, severe injury to personnel could result.

  • Page 33: Setup And Adjustments

    11 - SET UP AND ADJUSTMENTS 11.1 Box Width Adjustment Place box on infeed end of frame bed and align top fl ap center seam with arrows on front of upper frame. Move in and lock the side by tightening the appropriate knobs (Figure 11-1).
  • Page 34 11 - SET UP AND ADJUSTMENTS (continued) Figure 11-5 Figure 11-4 Figure 11-6 11.5 Special Setup Procedure for Outer Column Re-Positioning Moving the outer columns up one set of mounting holes increases the maximum box height handled by the 200a case sealer and decreases the minimum conveyor bed height. 1 - Place solid blocks approx.

  • Page 35: Operation

    12-OPERATION 12.1 Operator's Correct Working Position and 12.3 Starting Production Operational Flow (Figure 12-1). After having adjusted the machine according to the box dimensions (height-width), let the machine run without cartons and check its safety devices. Then start the working cycle. 12.4 Tape Replacement and Threading Skill 1 - Operator See Manual 2:...
  • Page 36 12-OPERATION (continued) 12.9 Troubleshooting Guide PROBLEM CAUSE CORRECTION PROBLEM CAUSE CORRECTION When pressing the ON button The lockable emergency stop Release the emergency stop the machine does not start button is pressed button Check the electrical system The magnetothermic protection Motor under stress Check that the drive belts are opens the main switch...

  • Page 37: Troubleshooting

    12-OPERATION (continued) 12.9 Troubleshooting Guide (continued) PROBLEM PROBLEM CAUSE CAUSE CORRECTION CORRECTION Drive belts break Worn belt Replace belt Squeaking noise as boxes Dry compression rollers Lubricate compression rollers pass through machine Defective column bearings Replace column bearings Tape not centered on box Tape drum not centered Reposition tape drum seam...
  • Page 38 12-OPERATION (continued) 12.9 Troubleshooting Guide (continued) PROBLEM CAUSE CORRECTION The blade does not cut tape The blade is dull and/or has Replace the blade or the tape end is jagged or broken teeth Increase tape tension by shredded adjusting the one-way roller Tape tension is insuffi...

  • Page 39: Safety Measures (See Section 3)

    13-MAINTENANCE AND REPAIRS 13.1 Safety Measures (see section 3) 13.2 Tools and Spare Parts Supplied with the Machine Carrying out maintenance and repairs may imply the necessity to work in dangerous situations. See Spare Parts Order Section. 13.3 Recommended Frequency of Inspection and Maintenance Operations Operation Frequency Qualification...
  • Page 40 Turn electrical supply off and disconnect before performing any adjustments, maintenance or servicing the machine or taping heads. 13.8 Box Drive Belt Replacement Note – 3M recommends the replacement of drive belts in pairs, especially if belts are unevenly worn. Lower Drive Belts (Figure 13-4) 1.

  • Page 41: Drive Pulley Ring

    13-MAINTENANCE AND REPAIRS (continued) 13.9 Box Drive Belt Tension and Drive Pulley Rings Before installing a new belt, check the orange plastic drive pulley rings for wear. If torn, broken, or worn smooth, replace the rings (Figure 13-5). Figure 13-5 WARNING To reduce the risk associated with mechanical and electrical hazards: •...
  • Page 42 13-MAINTENANCE AND REPAIRS (continued) Refer to Figure 13-7: 1. Remove and retain center plate/front cover and four screws. 2. Loosen, but do not remove, M10 lock nut with a 17 mm open end wrench. 3. Reset the tension on the drive belts as needed. Adjust the M8 tension screws in (clockwise) to increase tension or out (counterclockwise) to decrease tension.
  • Page 43 13-MAINTENANCE AND REPAIRS (continued) 13.11 List of the Maintenance Operations Date: Description of Operation ________ ________________________________________________________________ ________ ________________________________________________________________ ________ ________________________________________________________________ ________ ________________________________________________________________ ________ ________________________________________________________________ ________ ________________________________________________________________ ________ ________________________________________________________________ ________ ________________________________________________________________ ________ ________________________________________________________________ ________ ________________________________________________________________ ________ ________________________________________________________________ ________ ________________________________________________________________ ________ ________________________________________________________________ ________ ________________________________________________________________ ________...
  • Page 44 THIS PAGE IS BLANK...

  • Page 45: Statement Of Conformity

    14-ADDITIONAL INSTRUCTIONS 15-ENCLOSURES / SPECIAL INFO. 14.1 Information for Disposal of Machine (ELV) The machine is composed of the following materials: - Steel structure - Nylon rollers - Drive belts in PVC - Nylon pulleys For machine disposal, follow the regulations published in each country.
  • Page 46 THIS PAGE IS BLANK...

  • Page 47: Electric Diagrams

    16-TECHNICAL DIAGRAMS 16.1 Electric Diagram 2011 June 200a-NA...
  • Page 48 THIS PAGE IS BLANK...
  • Page 49 • SERIAL NUMBER • FIGURE NO. • POSITION • 3M PART NO. (11 DIGITS) • DESCRIPTION • QUANTITY Refer to Manual 2 for recommended taping head spare parts. Important! The machine is constantly revised and improved by our designers. The spare parts catalogue is also periodically updated.
  • Page 50 THIS PAGE IS BLANK...
  • Page 51 Important – Not all the parts listed are normally stocked items. Some parts or assemblies shown are available only on special order. Contact 3M/Tape Dispenser Parts to confi rm item availability. Options and Accessories For additional information on the options and accessories listed below, contact your 3M Representative.
  • Page 52 THIS PAGE IS BLANK...
  • Page 53 200a Adjustable Case Sealer Figure 10440 Figure 2798 Figure 5593 Figure 3431 Figure 5592 Figure 2795 Figure 2796 Figure 2795 (Motor) Figure 5594 Figure 3430 Frame Assemblies 2011 June 200a-NA...
  • Page 54 200a 14 31 Figure 2795 / 1 2011 June 200a-NA...
  • Page 55 200a Figure 2795 / 1 Ref. No. 3M Part No. Description 2795-1 78-8070-1513-2 Frame – Drive 2795-2 78-8070-1514-0 Spacer 2795-3 78-8070-1515-7 Spacer 2795-4 26-1003-5829-5 Screw – Hex Hd, M6 x 12 2795-5 78-8070-1518-1 Spacer – Shaft 2795-6 26-1003-6918-5 Nut – Hex Flange, M10, Plastic Insert...
  • Page 56 200a Figure 2795 / 2 2011 June 200a-NA...
  • Page 57 200a Figure 2795 / 2 Ref. No. 3M Part No. Description 2795-36 78-8052-6710-7 Roller – Idler 2795-37 78-8052-6709-9 Washer – Special 2795-38 78-8010-7435-8 Washer – Lock, M6 2795-39 26-1003-7957-2 Screw – Soc Hd Hex Hd, M6 x 16 2795-40 78-8070-1527-2 Shaft –...
  • Page 58 200a Figure 2796 2011 June 200a-NA...
  • Page 59 200a Figure 2796 Ref. No. 3M Part No. Description 2796-1 78-8070-1536-3 Support – Guide Arm 2796-2 78-8010-7169-3 Screw – Hex Hd, M6 x 12 2796-3 26-1000-0010-3 Washer – Flat, M6 2796-4 78-8070-1537-1 Lever With Pivot 2796-5 78-8070-1538-9 Bushing 2796-6 26-1003-8816-9 Screw –...
  • Page 60 200a 1 - 2 Figure 2798 2011 June 200a-NA...
  • Page 61 200a Figure 2798 Ref. No. 3M Part No. Description 2798-1 78-8070-1557-9 Compression Roller Assembly – Right 2798-2 78-8070-1558-7 Compression Roller Assembly – Left 2798-3 78-8070-1559-5 Support – Compression Roller 2798-4 78-8054-8648-3 Pressure Roller 2798-5 78-8070-1560-3 Stud – Roller Mounting 2798-6 78-8052-6566-3 Washer –...
  • Page 62 200a 13 12 21 14 Figure 10440 2011 June 200a-NA...
  • Page 63 200a Figure 10440 Figure 10440 Ref. No. 3M Part No. Description 10440-1 78-8076-4633-2 Tape Roll Bracket Assembly 10440-2 78-8070-1565-2 Tape Drum Bracket Assembly 10440-3 78-8070-1566-0 Bracket – Tape Drum 10440-4 78-8070-1395-4 Bracket – Bushing Assembly 10440-5 78-8070-1568-6 Cap – Bracket...
  • Page 64 200a 42 = 2, 3, 4, 5, 41 Caster Option* Figure 3430 200a-NA 2011 June...
  • Page 65 200a Figure 3430 Ref. No. 3M Part No. Description 3430-2 78-8091-0306-8 Bed Conveyor 3430-3 78-8091-0307-6 Support – Drive 3430-4 26-1003-5842-8 Screw – Hex Hd, M8 x 20 3430-5 78-8017-9318-9 Washer – Plain, 8 mm 3430-6 78-8076-5381-7 Leg Assembly – Inner W/Stop...
  • Page 66 200a 12+13+ 11 = 14+15 Figure 3431 2011 June 200a-NA...
  • Page 67 200a Figure 3431 Ref. No. 3M Part No. Description 3431-1 78-8060-8489-9 Column – Outer 3431-2 78-8060-8490-7 Plate – Column Mounting 3431-3 26-1003-7964-8 Screw – Soc Hd Hex Soc Dr, M8 x 20 3431-4 78-8017-9318-9 Washer – Plain, 8 mm 3431-5 78-8060-8491-5 Cap –...
  • Page 68 200a Figure 5592 2011 June 200a-NA...
  • Page 69 200a Figure 5592 Ref. No. 3M Part No. Description 5592-1 78-8091-0508-9 Bar – Supporting 5592-2 26-1003-7957-2 Screw – Soc Hd Hex Hd, M6 x 16 5592-3 78-8100-1042-7 Washer – /15 x 6.35 x 2 5592-4 78-8113-6756-0 Side Plate – Right, W/English Language Label...
  • Page 70 200a Figure 5593 2011 June 200a-NA...
  • Page 71 200a Figure 5593 Ref. No. 3M Part No. Description 5593-1 78-8091-0660-8 Housing – Wire 5593-2 78-8076-4702-5 Grommet – /28 5593-3 26-1003-7963-0 Screw – Soc Hd, M8 x 16 5593-4 78-8076-4636-5 Strap – Wire 5593-5 78-8010-7163-6 Screw - Hex Hd, M5 x10...
  • Page 72 200a Figure 5594 2011 June 200a-NA...
  • Page 73 200a Figure 5594 Ref. No. 3M Part No. Description 5594-1 78-8094-6379-3 Support – Box 5594-2 78-8113-6759-4 Box – W/English Language Label 5594-3 78-8094-6381-9 Screw – Soc Hd, Hex Hd, M4 x 15 5594-4 78-8005-5740-3 Washer – Plain, 4 mm 5594-5 26-1003-6914-4 Nut –...
  • Page 74 THIS PAGE IS BLANK...

  • Page 75: Spare Parts / Ordering

    Serial No. _____________________________________ production delays. For reference, record taping head(s) serial number(s) here. 3M Industrial Adhesives and Tapes AccuGlide is a Trademark of ™ 3M, St. Paul, MN 55144-1000 3M Center, Building 220-5E-06 Printed in U.S.A.
  • Page 77 Technical Assistance / Replacement Parts and Additional Manuals: Call the 3M-Matic™ Help line at 1-800 328-1390. Provide the customer support coordinator with the model/ machine name, machine type, and serial number that are located on the identification plate (For example: Model 200a / Accuglide 2+ / 2 inch - Type 10500 - Serial Number 13282).
  • Page 78 THIS PAGE IS BLANK...
  • Page 79 Order parts by part number, part description, and quantity required. Also, when ordering parts or additional manuals, include model/machine name, machine type, and serial number that are located on the identifi cation plate. 3M Industrial Adhesives and Tapes 3M-Matic , AccuGlide and Scotch ™...
  • Page 80 THIS PAGE IS BLANK...
  • Page 81 Instruction Manual AccuGlide 2+ STD 2 Inch ™ Upper and Lower Taping Heads Type 10500 Table of Contents Page Replacement Parts and Service Information .................... i - ii Table of Contents............................Equipment Warranty and Limited Remedy ....................Intended Use ............................Taping Head Contents / How to Use Manual....................

  • Page 82: Equipment Warranty And Limited Remedy

    If any part is defective within this warranty period, your exclusive remedy and 3M’s and seller’s sole obligation shall be, at 3M’s option, to repair or replace the part. 3M must receive actual notice of any alleged defect within a reasonable time after it is discovered, but in no event shall 3M have any obligation under this warranty unless it receives such notice within fi...

  • Page 83: Intended Use

    Inch Upper and Lower Taping Heads is to apply it suitable for mounting in box conveying systems other than 3M-Matic™ case sealers. This includes a "C" clip of Scotch ® pressure-sensitive fi lm box...
  • Page 84 THIS PAGE IS BLANK...

  • Page 85: Taping Head Contents / How To Use Manual

    (ELV), a glossary with a defi nition of symbols, plus a parts list of the 3M-Matic™ Accugllide 2+ (2 inch) 3M Industrial Adhesives and Tapes Division 3M Center, Bldg. 220-5E-06 St. Paul, MN 55144-1000 (USA) Edition December 2011/Copyright 3M 2011. All rights reserved The manufacturer reserves the right to change the product at any time without notice.

  • Page 86: Important Safeguards

    Important Safeguards This safety alert symbol identif es CAUTION important safety messages in this manual. READ AND UNDERSTAND To reduce the risk associated with muscle • THEM BEFORE INSTALLING OR strain: OPERATING THIS EQUIPMENT.  Use proper body mechanics when removing or installing taping heads that are Explanation of Signal Word Consequences moderately heavy or may be considered...
  • Page 87 Important - In the event the following safety labels are damaged or destroyed, they must be replaced to ensure operator safety. See "Replacement Parts Illustrations and Parts Lists" for label part numbers. 78-8133-9605-4 78-8070-1335-0 78-8133-9606-2 Tape Threading Label (not shown) Figure 1-1 Replacement Labels/3M Part Numbers 2011 December 2+ STD 2" Taping Head - NA...

  • Page 88: Specifications

    90mm [3-1/2 inches] (with optional 2 inch leg length) Case Sealer Width – 115mm [4-1/2 inches] When upper and lower taping heads are used on “3M-Matic” case sealers, refer to the respective instruction manual specifi cations for box weight and size capacities. Operating Rate: Conveyor speeds up to 0.40m/s [80FPM] maximum.

  • Page 89: Dimensional Drawing

    Specifications (continued) 457mm 405mm [16 in.] [18 in.] Maximum Roll 396 mm 396mm Diameter [15-19/32 in.] 350mm 13mm 13 mm 105mm [4-1/8 in.] [13-3/4 in.] [1/2 in.] [1/2 in.] 278mm 278 mm 58mm 58 mm [10-15/16 in.] [10-15/16 in.] [2 9/32 in. [2 9/32 in.] End View Side View...

  • Page 90: Installation

    70mm [2-3/4 inches], the taping heads evident, fi le a damage claim immediately with the must be completely staggered so only one tape transportation company and also notify your 3M seal is being applied at one time. Representative.

  • Page 91: Operation

    Operation Figure 3-1 Taping Head Components/Threading Diagram - Upper Head (Left Side View) Applying Roller Orange Knife Guard Tape Cut-Off Knife Threading Needle Wrap Roller Buffing Roller Buffing Arm Cover Knurled Roller Applying Tension Wrap Roller Mechanism Spring One-Way Tension Roller Tape Adhesive Side Tape Supply Roll Tape Drum...

  • Page 92: Tape Loading - Upper Taping Head

    Operation (continued) WARNING • To reduce the risk associated with shear, pinch, and entanglement hazards: − Turn air and electrical supplies off on associated equipment before performing any adjustments, maintenance, or servicing the machine or taping heads − Never attempt to work on the taping heads or load tape when the box drive system is running •...
  • Page 93 Operation (continued) Figure 3-4 Place tape roll on tape drum to dispense tape with adhesive side forward. Seat tape roll fully against back fl ange of drum. Adhere tape lead end to threading needle as shown. Figure 3-4 – Tape Loading/Threading WARNING •...

  • Page 94: Maintenance

    Maintenance WARNING • To reduce the risk associated with shear, pinch, and entanglement hazards: − Turn air and electrical supplies off on associated equipment before performing any adjustments, maintenance, or servicing the taping heads − Never attempt to work on the taping head or load tape while the box drive system is running •...

  • Page 95: Cleaning

    Maintenance (continued) WARNING • To reduce the risk associated with shear, pinch, and entanglement hazards: − Turn air and electrical supplies off on associated equipment before performing any adjustments, maintenance, or servicing the taping heads − Never attempt to work on the taping head or load tape while the box drive system is running •...

  • Page 96: Adjustments

    Adjustments WARNING • To reduce risk associated with shear, pinch, and entanglement hazards: - Turn air and electrical supplies off associated equipment before performing any adjustments, maintenance, or servicing the machine or taping heads. - Never attempt to work on the taping head or load tape while the box drive system is Figure 5-1 –...

  • Page 97: Applying Mechanism Spring

    Adjustments (continued) WARNING • To reduce risk associated with shear, pinch, and entanglement hazards: - Turn air and electrical supplies off associated equipment before performing any adjustments, maintenance, or servicing the machine or taping heads. - Never attempt to work on the taping head or load tape while the box drive system is running.

  • Page 98: Tape Leg Length

    Adjustments (continued) WARNING • To reduce the risk associated with One-Way shear, pinch, and entanglement Tension hazards: Roller Turn air and electrical supplies off associated equipment before perform- ing any adjustments, maintenance, or servicing the machine or taping heads. Never attempt to work on the taping head or load tape while the box drive system is running.

  • Page 99: Troubleshooting Guide

    Troubleshooting Troubleshooting Guide Cause Correction Problem The tape leg on the front of the The tape is threaded incorrectly The tape must go around the wrap roller before going around the case is too long one-way tension roller The tape tension is too low Adjust the one-way tension roller The knurled roller drags Check for adhesive build-up...
  • Page 100 Troubleshooting (continued) Troubleshooting Guide Cause Correction Problem There is excess tension on the Adjust the one-way tension roller Tape is tabbing on the trailing leg tape drum assembly and/or the and/or the tape drum assembly on the back of the box one-way tension roller assembly Rollers in the tape path do not Clean adhesive deposits from...

  • Page 101: Spare Parts/Service Information

    Spare Parts/Service Information Recommended Spare Parts Listed are a set of spare parts that will periodically require replacement due to normal wear. These parts should be ordered to keep the taping heads in production: AccuGlide™ 2+ STD 2 Inch Upper Taping Head Qty.

  • Page 102: Replacement Parts Illustrations And Parts List

    Not all the parts listed are normally stocked items. Some parts or assemblies shown Important – are available only on a special order basis. Contact 3M/Tape Dispenser Parts to confi rm item availability. 2011 December 2+ STD 2" Taping Head - NA...
  • Page 103 AccuGlide 2+ STD 2 Inch ™ Figure 10401 Figure 10397 (Upper) Figure 10399 (Lower) Figure 10395 Figure 10393 Figure 10387 (Upper) Figure 10389 (Lower) Figure 10391 Taping Head Assemblies - AccuGlide 2+ STD 2 Inch ™ 2011 STD 2" Taping Head - NA...
  • Page 104 AccuGlide 2+ STD 2 Inch ™ 23 21 Figure 10397 – Upper Head 2011 STD 2" Taping Head - NA...
  • Page 105 AccuGlide 2+ STD 2 Inch ™ Figure 10397 – 2" Upper Head Ref. No. 3M Part No. Description 10397-1 78-8133-9456-2 Frame – Tape Mount Upper Assembly 10397-2 78-8133-9458-8 Frame – Front Upper Assembly 10397-3 78-8068-4143-9 Guide – #1 10397-4 78-8068-4144-7 Guide –...
  • Page 106 AccuGlide 2+ STD 2 Inch ™ 12 11 12 13 Figure 10393 – Upper and Lower Heads 2011 STD 2" Taping Head - NA...
  • Page 107 AccuGlide 2+ STD 2 Inch ™ Figure 10393 – 2" Upper and Lower Heads Ref. No. 3M Part No. Description 10393-1 78-8133-9509-8 Applying Arm #1 10393-2 78-8133-9510-6 Applying Arm #2 10393-3 78-8070-1221-2 Plate – Tape 10393-4 78-8070-1309-5 Shaft Roller 10393-5 78-8070-1367-3 Roller –...
  • Page 108 AccuGlide 2+ STD 2 Inch ™ Figure 10387 – Upper Head 2011 STD 2" Taping Head - NA...
  • Page 109 AccuGlide 2+ STD 2 Inch ™ Figure 10387 – 2" Upper Head Ref. No. 3M Part No. Description 10387-1 78-8070-1392-1 Buffi ng Arm – Sub Assembly 10387-2 78-8070-1391-3 Buffi ng Arm – Sub Assembly 10387-3 78-8052-6575-4 Shaft – Roller 10387-5 78-8137-1398-5 Roller - Buffi...
  • Page 110 AccuGlide 2+ STD 2 Inch ™ Figure 10395 – Upper and Lower Heads STD 2" Taping Head - NA 2011...
  • Page 111 AccuGlide 2+ STD 2 Inch ™ Figure 10395 – 2" Upper and Lower Heads Ref. No. 3M Part No. Description 10395-1 78-8070-1388-9 Link – Arm Bushing Assembly 10395-2 78-8070-1389-7 Link – Arm Bushing Assembly 10395-3 78-8070-1271-7 Shaft – Pivot 10395-4 78-8017-9082-1 Bearing –...
  • Page 112 AccuGlide 2+ STD 2 Inch ™ Figure 10391 – Upper and Lower Heads 2011 STD 2" Taping Head - NA...
  • Page 113 AccuGlide 2+ STD 2 Inch ™ Figure 10391 – 2" Upper and Lower Heads Ref. No. 3M Part No. Description 10391-1 78-8070-1217-0 Frame – Cut-Off Weldment 10391-2 78-8017-9173-8 Blade – 65 mm/2.56 Inch 10391-3 26-1003-8596-7 Screw - Hex Hd M5 x 8 w/ Ext. Tooth Lockwasher...
  • Page 114 AccuGlide 2+ STD 2 Inch ™ Figure 10401 – Upper and Lower Heads 2011 2+ STD 2" Taping Head - NA...
  • Page 115 AccuGlide 2+ STD 2 Inch ™ Figure 10401 – 2" Latch Upper and Lower Heads Ref. No. 3M Part No. Description 10401-1 78-8070-1395-4 Bracket – Bushing Assembly 10401-2 78-8076-4519-3 Shaft – Tape Drum, 50 mm 10401-3 78-8017-9169-6 Nut – M18 x 1...
  • Page 116 AccuGlide 2+ STD 2 Inch ™ Figure 10399 – Lower Head 2+ STD 2" Taping Head - NA 2011...
  • Page 117 AccuGlide 2+ STD 2 Inch ™ Figure 10399 – 2" Lower Head Ref. No. 3M Part No. Description 10399-1 78-8133-9502-3 Frame – Tape Mount Lower Assembly 10399-2 78-8133-9500-7 Frame – Front Lower Assembly 10399-3 78-8068-4144-7 Guide – #2 10399-4 78-8068-4143-9 Guide –...
  • Page 118 AccuGlide 2+ STD 2 Inch ™ Figure 10389 – Lower Head STD 2" Taping Head - NA 2011...
  • Page 119 AccuGlide 2+ STD 2 Inch ™ Figure 10389 – Lower Head Ref. No. 3M Part No. Description 10389-1 78-8070-1391-3 Buffi ng Arm Sub Assembly, #1 10389-2 78-8070-1392-1 Buffi ng Arm Sub Assembly, #2 10389-3 78-8052-6575-4 Shaft – Roller 10389-5 78-8137-1398-5 Roller - Buffi...
  • Page 120 THIS PAGE IS BLANK...

This manual is also suitable for:

39600

Table of Contents