Table of Contents
Advertisement
No
Parts
Fan and motor
5
6
Temperature sensor
Procedure
2) Remove the 2 screws to remove the drain
hose fastened at the bottom of the side of the
fan coil unit (use +SCREWDRIVER).
1) Remove the hexagonal nut at the top of the
fan to separate the fan from the motor (use
Monkey spanner).
2) Remove the 3 hexagonal nuts fastening the
motor to separate the motor and the fan coil
unit (use Monkey spanner).
1) Remove the 6 screws on the evaporator and
remove the partition.
2) Remove the temperature sensor attached to
the evaporator pipe along with the fastening
clip.
3-41
Disassembly and Reassembly
Remark
Advertisement
Table of Contents
