hit counter code
Fujitsu M3099EX/EH Oem Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Scanner
  5. M3099EX/EH
  6. Oem manual
Fujitsu M3099EX/EH Oem Manual

Fujitsu M3099EX/EH Oem Manual

Image scanner
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
C150-E047-02EN
M3099EX/EH IMAGE SCANNER
OEM MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu M3099EX/EH

Summary of Contents for Fujitsu M3099EX/EH

  • Page 1 C150-E047-02EN M3099EX/EH IMAGE SCANNER OEM MANUAL...
  • Page 2 M3099EX/EH IMAGE SCANNER OEM MANUAL...
  • Page 3 Edition The contents of this manual may be revised without prior notice. All Rights Reserved, Copyright © 1996 FUJITSU LIMITED. Printed in Japan. No part of this manual may be reproduced in any form without permission. Address your comments and inquiries on this manual to: FUJITSU COMPUTER PRODUCTS OF AMERICA, INC.
  • Page 4 Preface This manual provides technical information required to use the original equipment manufacturing (OEM) M3099EX/EH image scanner. The manual is organized as shown below. Chapter 1 Overview Chapter 1 provides the scanner features, configuration, and operation. Chapter 2 Specifications Chapter 2 provides general, electrical, environmental, physical, and option specifications.
  • Page 5 A CAUTION indicates that damage to the scanner may result if you do not follow a procedure correctly. NOTICE A NOTICE provides “how-to” tips or suggestions to help you perform a procedure correctly. NOTEs are particularly useful for first-time users. M3099EX/EH OEM Manual...

  • Page 6: Table Of Contents

    INTERFACE SPECIFICATIONS ... 3-1 Control Interface ... 3-1 Video Interface ... 3-5 Command and Response ... 3-14 M3099EX/EH OEM Manual Configuration of the scanner ... 1-5 Arrangement of units ... 1-6 Operation of the mechanism unit ... 1-7 Operation of the control unit ... 1-8 Connection specifications ...
  • Page 7 Button specification and reading mode setting ... 4-8 Operation display ... 4-23 Document type ... 6-2 Ream weight ... 6-2 Precautions ... 6-2 Areas that must not be perforated ... 6-4 Print prohibit areas on the front and back surfaces ... 6-5 M3099EX/EH OEM Manual...
  • Page 8 APPENDIX A ENDORSER ... A-1 A1. Specification ... A-1 A2. Panel operation ... A-2 A3. Print head handling ...A-5 M3099EX/EH OEM Manual Print density measurement ... 6-7 Drop-out color standards ... 6-7 Shape ... 6-8 Document type ... 6-8 Cleaning the front-side lamp ... 8-2 Cleaning the rollers ...
  • Page 9 B3.12 Setting RS232C transfer rate ... B-10 B3.13 Setting picking start time ... B-10 B3.14 Setting picking time ... B-11 B3.15 Setting time-out limit ... B-11 B3.16 Setting hopper time ... B-12 B3.17 Setting heater control ... B-13 M3099EX/EH OEM Manual...
  • Page 10 6.2 Areas that must not be perforated ... 6-4 6.3 Print prohibit areas on the front and back surface... 6-5 6.4 Grounding color area ... 6-6 6.5 Spectrum band ... 6-7 6.6 Sharp of document ... 6-8 A.1 Print area ... A-1 M3099EX/EH OEM Manual...
  • Page 11 5.2 Device and operator actions for equipment errors... 5-4 7.1 Consumables ... 7-1 7.2 Accessories ... 7-2 8.1 Cleaning locations and frequencies ... 8-1 A.1 Endorser specifications ... A-1 viii (portrait mode) ... 3-8 (landscape mode)... 3-9 M3099EX/EH OEM Manual...

  • Page 12: Consumables

    Chapter 1: Overview Chapter 2: Specifications Chapter 3: Interface Specifications Chapter 4: Basic Operation Chapter 5: Error Processing and Recovery Chapter 6: Document Specification Chapter 7: Consumables and Accessories Chapter 8: Cleaning Appendix A: Endorser Appendix B: Setup Mode Appendix C: Separation pressure adjustment Glossary of Terms Index OVERVIEW...

  • Page 13: Chapter 1 Overview

    OVERVIEW This chapter provides scanner features, configuration, and operation. Scanner Types The M3099EX/EH is a very fast and highly functional image scanner developed for volume filing, using charge-coupled device (CCD) image sensors. This scanner, featuring duplex reading and high-quality image processing, read documents fed by an automatic document feeder (ADF).

  • Page 14: Sheets Hopper Type

    Appearance Figure 1.1 500 sheets hopper type Type 1000 sheets hopper 100V A3/Double letter 60 PPM (A4, 200dpi, portrate) Duplex 50 PPM (A4, 200dpi, portrate) 1000 sheets 100V with IPC2 200V 530 mm Installed 200V Figure 1.2 M3099EX/EH OEM Manual...

  • Page 15: Sheets Hopper Type

    OVERVIEW Figure 1.2 1000 sheets hopper type M3099EX/EH OEM Manual...

  • Page 16: Features

    Furthermore, the use of new LSI chips produces finer images. New image processing function The error diffusion feature is provided as standard. Dithering or error diffusion can be applied to those areas judged to be photographs by automatic separation (image processing II option). M3099EX/EH OEM Manual...

  • Page 17: Configuration

    Figure 1.3 shows scanner configuration. Mechanism unit Transfer system Control unit Operator panel : Option Figure 1.3 Scanner block diagram M3099EX/EH OEM Manual (Front-side) (Back-side) Sensor Lamp, Lamp, Printer heater, heater, inverter inverter Printer...

  • Page 18: Arrangement Of Units

    Arrangement of units Figure 1.4 shows arrangement of these units. Power supply units (+24V) Operator panel Control unit Stacker Optical unit (front-side) Automatic document feeder (ADF) Power inlet Optical unit Hopper Power switch (back-side) Figure 1.4 Arrangement of units M3099EX/EH OEM Manual...

  • Page 19: Operation Overview

    The document width is checked and document top is detected. The documents are counted, fed, and stacked on the stacker. The lamps illuminate the document, and a lens focuses the images on CCD for photoelectric conversion processing. M3099EX/EH OEM Manual OVERVIEW...

  • Page 20: Operation Of The Control Unit

    100 to 120 VAC 220 to 240 VAC Power switch Video Mechanism circuit unit (front-side) Video circuit (back-side) Image processing circuit II (option) Duplex (front-side) circuit Image Memory processing board circuit II (option) (back-side) Motor driver circuit Operator panel M3099EX/EH OEM Manual...

  • Page 21: Interface Control

    The resolution in the subscanning direction is achieved by changing the document transport speed. When the image processing circuit II (IPC II) option is installed, the linear density is changed by setting the parameter to its internal circuit. M3099EX/EH OEM Manual...
  • Page 22 This scanner has two power supplies. Their output voltages are as follows: Power supply 1 • +5V: For logic circuits • 12V: For video amplifiers Power supply 2 • 24V: For lamp, heater, and stepping motor drive 1-10 M3099EX/EH OEM Manual...

  • Page 23: Chapter 2 Specifications

    Output video Scanning speed (A4, Simplex 200dpi, portrait) Output density Binarization and halftone function Interface M3099EX/EH OEM Manual Type M3099EH 500 sheets hopper 1000 sheets hopper CCD image sensor ADF (automatic document feeder) & MF (manual feeder) MAX. 216 356 mm (A4/Letter/Legal) 297 432 mm (A3/Double letter) MIN.

  • Page 24: Electrical Specifications

    5 or less 59 dBA or less (ISO 7779) 8 KV or more Not operating –20 to 60 C 8 to 95% (no condensation) 0.4 G or less 10 or less 50 dBA or less (ISO 7779) M3099EX/EH OEM Manual...

  • Page 25: Physical Specifications

    Physical Figure 2.1 to Figure 2.2 show the scanner dimensions, Figure 2.3 Specifications shows scanner service areas. Table 2.4 lists physical specifications. Figure 2.1 Dimensions of 500 sheets hopper type M3099EX/EH OEM Manual (Unit: mm) SPECIFICATIONS...

  • Page 26: Dimensions Of 1000 Sheets Hopper Type

    (Unit: mm) Figure 2.2 Dimensions of 1000 sheets hopper type M3099EX/EH OEM Manual...

  • Page 27: Service Areas

    Table 2.4 Physical specifications Item Dimensions Weight Figure 2.3 Service areas M3099EX/EH OEM Manual Type 500 sheets hopper type 1000 sheets hopper type Width 610 mm Depth 680 mm Height 470 mm 55kg Scanner F: Front 1,390 (Unit: mm) SPECIFICATIONS...

  • Page 28: Option Specifications

    Option Table 2.5 lists the scanner option specifications. Specifications Table 2.5 Option specifications Item Endorser Specification Detail CA01023-D004 Ink-jet back-side print max. 20 characters Remark M3099EX/EH OEM Manual...

  • Page 29: Chapter 3 Interface Specifications

    EIA RS-232C standard. Connection specifications Transmission system Synchronization system Data length Stop bit Data check Data transfer rate Maximum connection Standard M3099EX/EH OEM Manual Item Specification Half-duplex Start-stop 8 bits 1 bit Odd parity check Start bit 1200, 2400, 4800, 9600 bps 5 m (16 ft.)

  • Page 30: Control Interface Signals

    This signal is set to off when the scanner is turned off, when the scanner is initially checked after power on. Controller ready (DSR) This signal indicates that the host computer is ready for transmission and reception. Host computer Scanner M3099EX/EH OEM Manual...

  • Page 31: Driver/Receiver

    • Driver: SN75188 or equivalent • Receiver: SN75189 or equivalent To determine the threshold level of the signal at the receiver, the following circuit must be connected to the response control pins. M3099EX/EH OEM Manual –12 V 20 k To response control pin...

  • Page 32: Timing

    Timing Scanner a: +0 ms b: +0 to 5 ms c: +0 to 10 ms (more than 1 word length) d: +0 ms Host computer (At transmission) M3099EX/EH OEM Manual...

  • Page 33: Video Interface

    These signal lines carry the scanning video data. Logical “0” indicates a black dot. (5) FAIL This signal indicates that a device error (MPU ROM/RAM error) has occured in the scanner. M3099EX/EH OEM Manual HGATE VGATE Scanner V0 ~ V7 (8 lines)

  • Page 34: Driver/Receiver

    (2) V0 to V7 MB463, or LS38 HGATE, VGATE, FAIL MB463, or LS38 Host computer +5 V • LS240, LS14, or equivalent +5 V • LS240, LS14, or equivalent +5 V • • LS240, LS14, 100 pF or equivalent M3099EX/EH OEM Manual...

  • Page 35: Data Transfer

    1. “0” to “7” correspond to the video data signal V0 to V7 respectively. 2. The most significant bit (MSB) of each video data signal is read first. Figure 3.4 Scanning data assignment M3099EX/EH OEM Manual Main scanning Main scanning...

  • Page 36: Transferred Data Length In Main Scanning

    – – – – – 2464 2080 2080 1384 2080 – – – – – 2048 1728 1728 1152 1728 – – – – – (Unit : lines) M3099EX/EH OEM Manual LETTER 3456 – 2592 – 2080 – 1728 –...

  • Page 37: Transferred Data Length In Main Scanning

    Note : 1. Data of dummy dots are sent as white. Effect in subscanning VGATE VIDEO The values of X and Y are shown in Tables 3.3 and 3.4. : Reference point of subscanning. M3099EX/EH OEM Manual Document size Double-letter A4 * 12 12 4680 –...

  • Page 38: Transferred Data Length In Subscanning (Portrait Mode)

    B4 * LEGAL 5732 4677 4048 3307 5600 4300 3508 3036 2480 4200 3440 2806 2429 1984 3360 2886 2339 2024 1654 2800 (Unit : lines) M3099EX/EH OEM Manual LETTER 4400 3300 2640 2200...

  • Page 39: Transferred Data Length In Subscanning (Landscape Mode)

    Table 3.4 Transferred data length in subscanning (landscape mode) Item 400 dpi 300 dpi 240 dpi 200 dpi Note : 1. Document size with * mark is available only for M3099EX. M3099EX/EH OEM Manual Document size Double-letter A4 * Offset dot Transferred 3456 data...

  • Page 40: Timing

    VCL and HGATE HGATE HGATE and VGATE HGATE VGATE The values of t 3-12 Note : VCL is not output when HGATE is off. Note : HGATE is always output. to t is shown in Table 3.5. M3099EX/EH OEM Manual...

  • Page 41: Timing Specification At Binary Output

    Table 3.5 Timing specification at binary output [Standard transfer : front-side] Notes: 1. Timing marked with * varies according to the scanning M3099EX/EH OEM Manual [Fast transfer : back-side] 2000 Unit : ns area. INTERFACE SPECIFICATIONS 2000 Unit : ns...

  • Page 42: Command And Response

    Host computer Command Completion of command transmission Command retransmission (only twice) Abnormal reception Normal reception Reception error Scanner Abnormal reception Normal reception Reception error • Command processing • Operation Response Response transmission end Response retransmission (only twice) M3099EX/EH OEM Manual...
  • Page 43 5. Response data such as ACK must be retried to the 6. The interval between words in the data stream must be no M3099EX/EH OEM Manual error, overrun error, or count error has occurred. transmission errors. When the check result has no problem, ACK is returned immediately to the originating source.
  • Page 44 CMD/RPS field A command or response code is indicated. TEXT field Additional information for a command/response, called control or device information, is indicated. Additional field In some commands, additional field exists next to TEXT field. 3-16 M3099EX/EH OEM Manual...

  • Page 45: Command

    INQUIRY *1: This command can be transmitted only when the image processing option is connected. *2: This command can be transmitted only when the endorser option is connected. M3099EX/EH OEM Manual Command Details code This command initializes the scanner. This command can be issued at any time.
  • Page 46 Byte 9: Number counter method Byte 10 and 11: Number initial value Dither or overlay pattern 64 bytes or more Byte 4 and 5: CNT Byte 6: Pattern ID Byte 7 or later: Dither, overlay or curve data Printing data M3099EX/EH OEM Manual...

  • Page 47: Clear Command

    *1: If a CONTROL REGISTER CLEAR command is issued after the READ command is sent to the scanner but before the Read Complete is recieved from the scanner, a command sequence error occur. M3099EX/EH OEM Manual CLEAR (X‘44’) command 00: POWER ON CLEAR This command resets the system to the power-on status.

  • Page 48: Control Command

    Undefined b0 b7 EXT. control reg. EXT. control reg. EXT. control reg. Control reg. A Front-side reading Control reg. A Control reg. B Back-side reading Control reg. B M3099EX/EH OEM Manual...
  • Page 49 Extend control register Extend control register #0 *1: See the 3-23 page. M3099EX/EH OEM Manual Transfer mode (back-side) (*1) This function specifies how image data in the back-side memory should be transferred. 000: Transfer mode 0 001: Transfer mode 1...
  • Page 50 Extend control register #1 This register is not supported. [00h] X'00' is set when the power is turned on or when a CLEAR command is issued for initialization. 3-22 M3099EX/EH OEM Manual...
  • Page 51 [Data transfer mode] Transfer mode Mode 0 Mode 1 Mode 2 Mode 3 M3099EX/EH OEM Manual Front-side Back-side Main Main Main Not supported Not supported Main Not supported Main : Scanning reference position INTERFACE SPECIFICATIONS Mirror Mirror 3-23...
  • Page 52 1101: Undefined 1110: Undefined 1111: Undefined Transfer rate (back-side) : Depending on devices (800 /400ns change by EEPROM) 1000: Undefined 1001: 800 ns 1010: 400 ns 1011: Undefined 1100: Undefined 1101: Undefined 1110: Undefined 1111: Undefined [00h] M3099EX/EH OEM Manual...
  • Page 53 Extend control register #3 This register is not supported. M3099EX/EH OEM Manual X'00' is set when the power is turned on or when a CLEAR command is issued for initialization [00h] INTERFACE SPECIFICATIONS 3-25...
  • Page 54 Scanning resolution : Set from the operator panel 1000: 400 dpi 1001: 300 dpi 1010: 240 dpi 1011: 200 dpi 1100: 1101: Not defined 1110: 1111: Specified start of reading (*2) 0: Operation panel (*1) 1: Host computer M3099EX/EH OEM Manual...
  • Page 55 #1, bit 3 to 0. And when the control register #19, bit 0 is "1", 256 types density are sellectable by the control register #20. M3099EX/EH OEM Manual Density : Set from the operator panel 01000: Light...
  • Page 56 • Eight patterns (000 to 111) is valid when the download pattern is Specifies halftone 0 : Set from the operator panel 10: Not dithered 11: Dithered or Error diffusion (*2) Dither pattern No. specification 000: 001: 010: 011: (*1) 100: 101: 110: 111: Built-in/Download 0: Built-in 1: Download M3099EX/EH OEM Manual...
  • Page 57 Control register B#3 X’A6' is set when power is turned on or when a CLEAR command is issued for initialization. • This register is valid when the IPC II option is installed. M3099EX/EH OEM Manual Threshold curve 000: Light 001:...
  • Page 58 1: ON Noise removing of 4 4 matrix 0: OFF 1: ON Noise removing of 5 5 matrix 0: OFF 1: ON Enables the noise removing bits (bits 1-4 when this bit is active). 0: ON 1: OFF M3099EX/EH OEM Manual...
  • Page 59 Control register A#5 X'00' is set when the power is turned on or when a CLEAR command is issued for initialization. Default document size depends on the EEPROM setting. M3099EX/EH OEM Manual Standard document size 0000: A0 0001: A1 Not defined...
  • Page 60 X’00' is set when the power is turned on or when a CLEAR command is issued for initialization. B #5 Control register A#6 to #9 Control register B#6 to #9 Not specified for this scanner. NONSTANDARD DOCUMENT SIZE SETTING REGIS 3-32 Picking 0: Invalid 1: Valid M3099EX/EH OEM Manual...
  • Page 61 Operation error occurs when the values of X1 + X2 [(#10, #11) + (#12, #13)] and Y1 + Y2 [(#14, #15) + (#16, #17)] area more than the values shown below. Scanner M3099EX M3099EH M3099EX/EH OEM Manual LSB MSB Picking in subscanning Picking area Document surface...
  • Page 62 3. When the jam detection bit (control register #2) is "1", a setting of Y2 is ignored. Reference point Front side of scanner REG. [Example] REG. (#10 to #13 or #14 to #17) must be specified. Area to be scanned (#14) (#15) (#16) (#17) M3099EX/EH OEM Manual...
  • Page 63 B #19 *1: If the built-in patterns are valid, 0 to 2 ('000' to '010') can be selected. M3099EX/EH OEM Manual Read density specification 0: 8 steps (Control register #1 is valid.) 1: 256 steps (Control register #20 is valid.)
  • Page 64 A #20 B #20 *1: This register is valid if bit 0 control register #19 is 1. 3-36 Read density (256-step selection) (*1) X'00': Default (same as for X'80') X'01': Light X'FF': Dark M3099EX/EH OEM Manual...
  • Page 65 Control register B#21 X'00' is set when the power is turned on or when a CLEAR command is issued for initialization. A #21 B #21 M3099EX/EH OEM Manual Contrast specification X'00': Default (same as for X'80') X'01': Lowest contrast X'80': Normal...
  • Page 66 Selects image control register A (front-side) Selects image control register B (back-side) processing option (IPC II), the scanner sends "Operation error" as response. Byte 4 or later Image control register Image control register No. Front-side/back-side select Description M3099EX/EH OEM Manual...
  • Page 67 Image control register A#0, B#0 X’00' is set when the power is turned on or when a CLEAR command is issued for initialization. This register must be sent before setting the image control registers #1 to #8. M3099EX/EH OEM Manual INTERFACE SPECIFICATIONS 3-39...
  • Page 68 7 of image control register #2 and the bit 3 of image control register #3 must be set to '0'. Not provided with right/left conversion. Provided with right/left conversion. Not provided with right/left conversion. Provided with right/left conversion. M3099EX/EH OEM Manual...
  • Page 69 Image control register A#2, B#2 X’00' is set when the power is turned on or when a CLEAR command state is issued for initialization. M3099EX/EH OEM Manual Sharpness control (image emphasis) 0 0 0 : Normal 0 0 1 : Emphasis, large...
  • Page 70 0 0 0 0 0 1 0 1 0 0 1 1 (*2) 1 0 0 1 0 1 1 1 0 1 1 1 Download/built-in overlay pattern 0 : Built-in pattern valid 1 : Download pattern valid M3099EX/EH OEM Manual...
  • Page 71 Built-in overlay pattern No. 0 Horizontal lines No. 1 Vertical lines No. 2 Angled pattern M3099EX/EH OEM Manual INTERFACE SPECIFICATIONS 3-43...
  • Page 72 No. 3 Dots pattern No. 4 Triangle pattern No. 5 Lattice pattern 3-44 M3099EX/EH OEM Manual...
  • Page 73 X’00' is set when the power is turned on or when a CLEAR command is issued for initialization. Eight parameter (000 to 111) can be specified as variance rate. M3099EX/EH OEM Manual Simplified dynamic threshold specification 0 x : Not operation...
  • Page 74 0 0 0 0 1 1 0 0 1 : 25% 0 0 1 1 0 0 1 0 0 : 100% Vertical/horizontal zooming specification (*2) 0 : Same magnification for both direction 1 : Different magnification for each direction 0.25 = 50 dpi. M3099EX/EH OEM Manual...
  • Page 75 C: Horizontal magnification (25 to 100%) This expression is rounded up to the integer. Image control register B#5 to #8 Since these registers are not supported, specify X’08000000'. M3099EX/EH OEM Manual b0 b7 Horizontal magnification (When each direction zooming is valid)
  • Page 76 Print mode 0X: Depends on the operator panel specification. 10: OFF 11: ON b0b7 b0b7 b0b7 b0b7 b0 Print Number Number position counter initial method value (*2) Command specification method 0 0 : Parallel processing (read + print) M3099EX/EH OEM Manual...
  • Page 77 Print position Y register Specify the value in binary code in unit of 1/400 inch. Paper feed direction (Back-side) Center of the paper M3099EX/EH OEM Manual Character row direction 00 : Vertical downward direction 10: Not defined Character rotation 00: 90...
  • Page 78 Number counter method register Number initial value register The default for this device is X'0000". X'0000' to X'FFFF' can be specified. 3-50 Counting number 01: By 1 10: By 2s Increment/decrement specification 0X: No increment/decrement 10: Increment 11: Decrement M3099EX/EH OEM Manual...
  • Page 79 When the scanner receives this command, the scanner reports the scanner status. The sense command can be issued at any time if another command does not require the response from the scanner. Byte 1 X'02' M3099EX/EH OEM Manual Byte 2 Byte 3 or later X'53' —...

  • Page 80: Return Sense Command

    Byte 1 X'02' 3-52 Byte 2 Byte 3 or later X'42' — Byte 1 Byte 2 Byte 3 TEXT X'03' X'43' 0 : Front-side image status received 1 : Back-side image status received Byte 2 X'40' M3099EX/EH OEM Manual...

  • Page 81: Send Dither 1 Command

    This command is valid for the scanner with the image processing circuit. By this command, download patterns of dither or overlay pattern can be registered. Byte 1 X'43' M3099EX/EH OEM Manual Byte 2 Byte 3 TEXT X'46' Dither or overlay...
  • Page 82 When the power to the scanner is turned off or when the scanner is reset, registration must be done again. When a pattern is built in, registration need not be done again. (8 8 matrix) M3099EX/EH OEM Manual...

  • Page 83: Send Dither 2 Command

    *1: Count A (bytes 4 and 5) contains the number of data a units from byte 6 or a subsequent byte. (256 bytes or more data can be transferred.) Example: SEND DITHER 2 command M3099EX/EH OEM Manual Byte 2 Byte 3 Byte 4, 5...
  • Page 84 If the scanner is turned off, or reset, they must be registered again. If the patterns built into the scanner are used, they need not the registered. Byte 7 or later 111 : Eight types 00 : Dithering 01 : 10 : Overlay 11 : Not defined M3099EX/EH OEM Manual...
  • Page 85 The patterns must be transferred in the following order and format (SEND DITHER 2 is used). Transfer order 1 M3099EX/EH OEM Manual (n n matrix) 10 11 12 00 01 02 03 04 05 06 07 08 09 0A 0B...
  • Page 86 00 00 00 00 FF FF FF 00 00 00 00 FF FF FF 00 00 00 00 FF FF FF (8 8 matrix) Byte 2 Byte 3 TEXT X'48' Print information III (*1) Byte 4 or later Print (data ) M3099EX/EH OEM Manual...
  • Page 87 *2: When you intend to print the number, please put '%05ud'. Then the scanner prints the numbers in accordance with the information of the resister of PRINT CONTROL command. Printing number is only five figures. M3099EX/EH OEM Manual Character table No. 000 : FJ format (standard) 001 :...
  • Page 88 “X Y Z A B C 0 0 0 0 0 ” 65536th sheet repeat X’00’ X’00’ X’81’ X’00’ Byte 8 Byte 9 Byte 10 Byte 11 Byte 12 Byte 13 X’42’ X’43’ X’25’ X’30’ X’35’ X’75’ 1st sheet 2nd sheet M3099EX/EH OEM Manual X’01’ Byte 14 X’64’...

  • Page 89: Responses

    Complete Operation Error Error Temporary Error Equipment Error M3099EX/EH OEM Manual Details Response Code Completion of scanner initialization Response to command reception Reporting the image processing mode for each main window and the number of bytes per line in the X-axis direction...

  • Page 90: Response

    Device Device Device information II-i information II-ii information II-iii Device – – information II-i Device Device Device information II-i information II-ii information II-iii Device – – information II-i – – – – – – – – – M3099EX/EH OEM Manual...
  • Page 91 Normal status This response is for command reception and includes device information. Device information indicates the status of scanner operation. Byte 1 X'04' Byte 1 X'06' M3099EX/EH OEM Manual Byte 2 Byte 3 or later X'52' — Byte 2 Byte 3...
  • Page 92 10110 : Double-letter (Defined only M3099EX) 10111 : Letter 11000 : B0 11001 : B1 Not defined 11010 : B2 11011 : B3 11100 : B4 (Defined only M3099EX) 11101 : B5 11110 : Not defined 11111 : Legal M3099EX/EH OEM Manual...
  • Page 93 Device information II-i *1: This bit is valid when it is specified in Normal status response for the START command. M3099EX/EH OEM Manual Dynamic threshold 0 : Not provided circuit option 1 : Provided Vertical/horizontal 0 : Portrait 1 : Landscape...
  • Page 94 (What indicates which data is transferred, front-side data or back-side data.) 3-66 Halftone (Back-side) 0 : OFF 1 : ON Front-side/back-side reading (*1) 0 : Front-side reading 1 : Back-side reading 0 0 : Simplex (front-side) reading 1 : Duplex reading M3099EX/EH OEM Manual...
  • Page 95 Device information II-iii Error diffusion (Back-side) *1: This bit is same as bit 0 of device information II-i. M3099EX/EH OEM Manual Dynamic threshold circuit option (Front-side) (*1) 0 : Not provided 1 : Provided Error diffusion (Front-side) 0 : Not provided...
  • Page 96 1 : Specified 0 : Not specified 1 : Specified 0 : Not specified 1 : Specified 0 : Not specified 1 : Specified 0 : Not specified 1 : Specified 0 : Not provided 1 : Provided M3099EX/EH OEM Manual...
  • Page 97 Device information IV Device information V, VI Device information VII, VIII VIII M3099EX/EH OEM Manual Reserved b0 b7 Vertical magnification 000011001 : 25% 001100100 : 100% b0 b7 Horizontall magnification 000011001 : 25% 001100100 : 100% INTERFACE SPECIFICATIONS 3-69...
  • Page 98 Note: X'0000' is sent when ADF mode is selected. Byte 2 X'4A' Device function information I to VII Number of bytes per line in the X-axis direction Number of lines in the Y-axis direction Byte 3 or later M3099EX/EH OEM Manual...
  • Page 99 Device function information I indicates type information of the scanner. Device function information II Device function information II indicates scanning resolution supported of the scanner. II - i Not defined M3099EX/EH OEM Manual Simplex/duplex 0 : Simplex 1 : Duplex 200 dpi 240 dpi 300 dpi...
  • Page 100 III - i III - i Letter III-ii III-ii Not defined 3-72 (Reserved) Double-letter 0 : Not specified 1 : Specified Legal 0 : Not specified 1 : Specified for M3099EH for M3099EX for M3099EH for M3099EX M3099EX/EH OEM Manual...
  • Page 101 Device function information IV Device function information IV indicates image processing function of front-side supported of the scanner. IV - i Magnification Reduction IV - ii Overlay M3099EX/EH OEM Manual (Reserved) Dynamic threshold Dither Error diffusion Automatic specification Multilevel output Mirror image...
  • Page 102 Magnification 0 : Not specified 1 : Specified Outline extraction Image emphasis Smoothing Filtering Noise removal curve 0 : Not specified Overlay 1 : Specified Picking 0 : Not specified 1 : Specified Dynamic threshold White/Black conversion M3099EX/EH OEM Manual...
  • Page 103 V - iii Device function information VI Device function information VI indicates option information of the scanner. VI - i VI-ii M3099EX/EH OEM Manual Not defined Picking 0 : Not specified 1 : Specified Undefined Endoser Bar code recognition MH compression...
  • Page 104 ' 0.5 MB Byte 2 Byte 3 TEXT X'46' Device Information I Byte 2 Byte 3 TEXT X'46' Device Information I Byte 4 or later Device Information II-i Byte 4 or later Device Information II-i to II-iii M3099EX/EH OEM Manual...
  • Page 105 Device information indicates the status of the scanner operation. Device information I M3099EX/EH OEM Manual Resolution 000 : 400 dpi 001 : 300 dpi 010 : 240 dpi 011 : 200 dpi 100 : 101 : Not defined 110 :...
  • Page 106 0 : Portrait 1 : Landscape 0 : OFF 1 : ON 0 : Close 1 : Open 0 : Non-job separate sheet 1 : Job separate sheet 0 : No paper in hopper 1 : Paper in hopper M3099EX/EH OEM Manual...
  • Page 107 *1: This bit is available only in the case of "Normal status" to START command or "Read complete" to READ command. (What indicates which data is transferred, front-side data or back-side data.) M3099EX/EH OEM Manual Halftone (Back-side) 0 : OFF 1 : ON...
  • Page 108 0 : Not provided 1 : Provided Error diffusion (Front-side) 0 : Not provided 1 : Provided Dynamic threshold circuit option (Back-side) 0 : Not provided 1 : Provided Error diffusion (Back-side) 0 : Not provided 1 : Provided M3099EX/EH OEM Manual...
  • Page 109 *1: Although standard document size bit on control register 5 is on, (Bit 7 takes "1" and bit 6 takes "0"), the size specifying bits (bits 0 to 4) are not defined. Control register contents do not change even if the above errors are detected. M3099EX/EH OEM Manual Byte 2 Byte 3 TEXT...
  • Page 110 There were no document on the hopper when the READ command was received during ADF operation. 3-82 Byte 2 Byte 3 TEXT X'54' Detailed error Information II Jamming Hopper empty Upper transport unit OPEN ADF error Endorser error STOP button pressed M3099EX/EH OEM Manual...
  • Page 111 This response indicates that the device fault occurs. Byte 1 X'03' Detailed information III Detailed error information III provides details of the scanner errors that require a call to CE. M3099EX/EH OEM Manual Byte 2 Byte 3 TEXT X'50' Detailed error Information III Hardware is blown.

  • Page 112: Command/Response Sequence For Initialization

    Note: The maximum time from the CLEAR command reception to 3-84 Host computer CLEAR Ready Equipment Check the returning of a response is 10 seconds after wam up is complete. Scanner • Initialization • Internal diagnosis Normal Abnormal M3099EX/EH OEM Manual...

  • Page 113: Read Operation

    CONTROL B (Back-side) PRINT CONTROL and SEND DATA (In case of Endorser using) START IMG.MOD READ START IMG.MOD READ M3099EX/EH OEM Manual Host machine Scanner Computer processing Normal Status Normal Status Paper feed start Normal Status Document size report (Front-side reading)

  • Page 114: Command/Response Sequence For The Read Operation (1)

    If a CONTROL command must be issued, terminate the scanning sequence once by issuing a CLEAR command. Issuing the CLEAR command cause the document to be ejected. The IMAGE MODE SENSE command need not always be issued. M3099EX/EH OEM Manual...
  • Page 115 CONTROL (Extend) • Duplex scanning specification CONTROL A (Front-side) CONTROL B (Back-side) START IMG.MOD READ START IMG.MOD READ M3099EX/EH OEM Manual Host machine Scanner Computer processing Normal Status Paper feed start Normal Status Document size report (Front-side reading) (*1) SENSE (Front-side)

  • Page 116: Command/Response Sequence For The Read Operation (2)

    If a CONTROL command must be issued, terminate the scanning sequence once by issuing a CLEAR command. Issuing the CLEAR command cause the document to be ejected. The IMAGE MODE SENSE command need not always be issued. M3099EX/EH OEM Manual...
  • Page 117 CONTROL (Extend) • Duplex scanning specification CONTROL A (Front-side) CONTROL B (Back-side) START IMG.MOD READ START IMG.MOD READ M3099EX/EH OEM Manual Host machine Scanner Computer processing Normal Status Paper feed start Normal Status Document size report (Front-side reading) (*1) SENSE (Front-side)

  • Page 118: Command/Response Sequence For The Read Operation (3)

    Ready lamp lights whether the scanning start specification is “Operator Panel” or “Host”. The manual document insertion is awaited. When the Hopper Empty sensor is covered with a document, the scanner starts picking and transporting the document and returns “Normal Status”. M3099EX/EH OEM Manual...

  • Page 119: Command/Response Correspondence

    Command processing enabled normally. Reading operation enabled normally. The command was destroyed because a sequence error or transmission error was detected. Jam, hopper empty, or upper transport unit open detected. M3099EX/EH OEM Manual Normal Normal Read Image Unit...
  • Page 120 The command was destroyed due to a transmission error. Paper jam not yet recovered. A device fault has been detected. (The fault has already been reported by the last CLEAR or READ commands) Return operation was completed normally. M3099EX/EH OEM Manual...

  • Page 121: Command/Response Timing Chart

    Figure 3.10 to Figure 3.15 shows the timing chart for each command. Figure 3.10 CLEAR command sequence Figure 3.11 CONTROL command sequence Figure 3.12 START command sequence Figure 3.13 READ command sequence Figure 3.14 SENSE command sequence Figure 3.15 RETURN SENSE command sequence M3099EX/EH OEM Manual INTERFACE SPECIFICATIONS 3-93...
  • Page 122 3-94 M3099EX/EH OEM Manual...
  • Page 123 INTERFACE SPECIFICATIONS M3099EX/EH OEM Manual 3-95...
  • Page 124 3-96 M3099EX/EH OEM Manual...
  • Page 125 INTERFACE SPECIFICATIONS M3099EX/EH OEM Manual 3-97...
  • Page 126 3-98 M3099EX/EH OEM Manual...
  • Page 127 INTERFACE SPECIFICATIONS M3099EX/EH OEM Manual 3-99...
  • Page 128 3-100 M3099EX/EH OEM Manual...
  • Page 129 INTERFACE SPECIFICATIONS M3099EX/EH OEM Manual 3-101...
  • Page 130 3-102 M3099EX/EH OEM Manual...

  • Page 131: Chapter 4 Basic Operation

    Power Switch The power switch is located at the right side of the scanner. Operation Figure 4.1 shows switch location. Figure 4.1 Power switch location M3099EX/EH OEM Manual BASIC OPERATION Power switch...

  • Page 132: Opening The Upper Transport Unit

    "LIFT-up" latch and then to lower down the upper transport unit with your hands. M3099EX/EH OEM Manual...

  • Page 133: Operator Panel Arrangement And Functions

    Start Figure 4.2 Operator panel arrangement Operator panel functions The operator panel has 13 buttons and 3 LEDs. Table 4.1 lists button functions, and Table 4.2 lists LED function. M3099EX/EH OEM Manual Ready Check (24 Character 2 2 line) Size...

  • Page 134: Button Functions

    Sets the document scan direction to the portrait or landscape mode. Sets whether to execute halftone processing (dither or error diffusion) and also automatic separation processing (dither or error diffusion if the image processing option is installed). M3099EX/EH OEM Manual...

  • Page 135: Lcd Display

    The upper line (line 1) displays the current read mode for simplex reading. The lower line (line 2) displays the modes set and messages when the buttons are pressed. M3099EX/EH OEM Manual Function Sets the document type (photograph or linedrawing). Activates the setup mode. (See Appendix B) Activates the maintenance mode.
  • Page 136 Image processing option Yes: > Linedrawing or photo selection To read a photo document: P. To read a linedrawing document: L. If the image processing option is not installed, automatic separation can not be done. for M3099EH M3099EX/EH OEM Manual...

  • Page 137: Duplex Reading Mode

    The other mode is the same as that for front-side reading. M3099EX/EH OEM Manual 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Halftone processing...

  • Page 138: Button Specification And Reading Mode Setting

    “F” and “B” alternately blink for the setting of front or back-side. 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Duplex button pressed M3099EX/EH OEM Manual > > >...

  • Page 139: Simplex (Front-Side) Reading Mode

    <Screen 2> Simplex (front-side) reading mode <Initial screen of the simplex reading mode> M3099EX/EH OEM Manual 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Front/Back button pressed 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23...
  • Page 140 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 (Blinking) (Blinking) (Blinking) M3099EX/EH OEM Manual > > >...
  • Page 141 Screen 6. Each time this button is pressed, the blinking part changes in turn, and the mode indicated on the upper line changes accordingly. *1: This button is available only for M3099EX. M3099EX/EH OEM Manual Lower line display Without image With image...
  • Page 142 4-12 (Portrait) 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 (Landscape) (Blinking) (Blinking) M3099EX/EH OEM Manual > >...
  • Page 143 "LINE" or "PHOTO" starts blinking in turns, and the document selection indication displayed on the upper line changes accordingly. M3099EX/EH OEM Manual 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 (Blinking) Display...
  • Page 144 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 (Blinking) (Manual mode set) Manual button pressed (Manual mode released) M3099EX/EH OEM Manual > > >...
  • Page 145 Press the stop button then start the scan from the initial screen. Duplex (front-side) reading mode <Initial screen of the duplex reading mode> M3099EX/EH OEM Manual 400 HT1 L. > SF A4 Size:DLT SF A4 Den.:...
  • Page 146 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 (Blinking) 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 (Blinking) (Blinking) (Blinking) M3099EX/EH OEM Manual > > > >...
  • Page 147 This button is used to select whether or not to perform halftone (dither or error diffusion)processing. For details, see the explanation of <Screen 7>. <Screen 14> M3099EX/EH OEM Manual (Landscape) (Portrait) 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23...
  • Page 148 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 (Blinking) (Manual mode set) Manual button pressed (Manual mode released) M3099EX/EH OEM Manual > > > > >...
  • Page 149 *1: Pressing the Stop button during reading mode setting returns the display to the initial screen of the duplex reading mode. Press the stop button then start the scan from the initial screen. M3099EX/EH OEM Manual 400 HT1 L. > L. > 400 HT1 L. >...

  • Page 150: Duplex (Back-Side) Reading Mode

    9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Not displayed unless the image processing option is installed. (Blinking) M3099EX/EH OEM Manual > > > >...
  • Page 151 Press the stop button then start the scan from the initial screen. M3099EX/EH OEM Manual 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 400 HT1 L. >...
  • Page 152 The hopper table is lowered to the bottom. A prepicked document if any is ejected to the stacker. The button works only when a document is picked. The hopper table is lowered to he bottom. Please set the document on the hopper again. M3099EX/EH OEM Manual...

  • Page 153: Operation Display

    The counter of reading paper is displayed in a batch of the reading operation. Example of simplex reading M3099EX/EH OEM Manual 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 – 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23...
  • Page 154 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Abrasion counter M3099EX/EH OEM Manual > > >...

  • Page 155: Buzzer Functions

    Classification Operation display Warning Temporary errors M3099EX/EH OEM Manual Function Sounds during 3 seconds. The buzzer turns off when a button is pressed or power is turned off. Even if a button is pressed, the scanner continues to display the error.

  • Page 156: Loading Document

    TIME-OUT ALARM PRINT (*1) HARDWARE ALARM Guide 1 Set the specified document width. Hold the lock lever at the guide center on the right of the hopper table and move Lock it horizontal to set the lever document width. M3099EX/EH OEM Manual...
  • Page 157 Line mark Document Stacker Stacker table Stopper M3099EX/EH OEM Manual 2 Load a document read side face-up on the hopper table. Note: 1. Be sure not to load documents higher than the line marked inside the guide on each side of the hopper table.

  • Page 158: Lamp Replacement

    Power switch Lever Lamp socket covers 1 Turn off the power switch. 2 Open the upper transport unit. (See page 4-2) 3 Remove the two lamp socket covers (U-shaped spring clips) by pulling them out of their positions. M3099EX/EH OEM Manual...
  • Page 159 Wire of the heater M3099EX/EH OEM Manual Upper transport unit 4 Rotate the lamp so that the two terminals on each and align with the exit slot on the lamp socket. Maintain the alignment and remove the lamp from the lamp sockets.
  • Page 160 7 To re-install lamp/heater, reverse procedures in item 4 above. Note: When re-stalling the lamp, make sure to rotate the lamp in the direction as shown in the left figure. 8 Close the upper transport unit. (See page 4-2) M3099EX/EH OEM Manual...
  • Page 161 Replacing the back-side lamp Lamp unit Lamp unit M3099EX/EH OEM Manual 1 Turn off the power switch. 2 Slide and open the side cover (small cover on the center of the right cover). Side cover Power switch 3 Turn the thumb screw to...
  • Page 162 • If any visible damage on the heater is observed, please contact manufacturer's authorized service center for proper repair service. 6 Re-attach a new lamp to the C-shaped heater. Note: Position the lamp so that the following lengths are the same: M3099EX/EH OEM Manual...

  • Page 163: Roller Asy Replacement

    Replace the roller ASY as follows: Replacement WARNING Wait at least 3 minutes after turning off the power before replacement. Upper transport unit Lever M3099EX/EH OEM Manual 7 To re-install lamp/heater, reverse procedures in item 4 above. Note: Make sure to rotate lamp in...
  • Page 164 ASY. (front: 3 pin, back: 2 pin) unit. (See page 4-2) M3099EX/EH OEM Manual...

  • Page 165: Pick Roller Replacement

    Replace the pick roller as follows: Replacement Upper transport unit Lever Pick roller section M3099EX/EH OEM Manual 1 Turn off the power switch. 2 Open the upper transport Operator panel unit. (See page 4-2) Power switch 3 Put off U shaped clips on...

  • Page 166: Belt Replacement

    5 Lift the document sensor unit and keep it at the upper position with one hand and pull the roller ASY out with the other hand. 6 Move the guide on the hopper table completely to the end. M3099EX/EH OEM Manual...
  • Page 167 Belt M3099EX/EH OEM Manual 7 Hold both ends of the guide plate and press them down to remove the guide. 8 Pull out the belt ASY. Belt ASY 9 Separate the belt roller and Roller shaft from the guide plate.

  • Page 168: Pad Replacement

    3 Disconnect the two relay connectors on the roller ASY. 4 Push the two levers (green) towards each other to disengage with the upper locking holes and lower down the two levers until they engage with the two levers locking holes. M3099EX/EH OEM Manual...
  • Page 169 Hopper table Bracket M3099EX/EH OEM Manual 5 Lift the document sensor Guide plate unit and keep it at the upper position with one hand and pull the roller ASY out with the other hand. 6 Move the guide on the hopper table completely to the end.
  • Page 170 4-40 M3099EX/EH OEM Manual...

  • Page 171: Chapter 5 Error Processing And Recovery

    Common action at temporary errors is 0.5 second interval buzzer for 3 seconds. The temporary errors are recovered by pressing the stop button. M3099EX/EH OEM Manual Scanner actions (*2) Action to recover (*3) - The normally read document is...

  • Page 172: Device And Operator Actions For Temporary Errors

    SENSE command is received from the host computer, “Temporary Error” is returned. *: This status is not detected in the manual mode. M3099EX/EH OEM Manual Action to recover - The error is recovered by issuing the start command. - Load documents on the hopper and start reading them.
  • Page 173 OPEN MISS PICK ROLLER UNIT NOT SET HOPPER OVER- LOAD M3099EX/EH OEM Manual Scanner actions Action to recover - The mechanism system is - Close the upper stopped immediately and transport unit or the an error message is endorser cover.

  • Page 174: Device And Operator Actions For Equipment Errors

    Action to recover - Check if the lamp or heater is attached correctly. Replace lamp according to the replacement method. - If turning the power on again does not recover the scanner, contact the maintenance personal. M3099EX/EH OEM Manual...
  • Page 175 V-RAM 1 to 4 ALARM * Endorser option only *1: Common action at equipment error is the buzzer activated for 3 seconds. M3099EX/EH OEM Manual Scanner actions (*1) Action to recover - The Check lamp lights - Check if the lamp or...
  • Page 176 M3099EX/EH OEM Manual...

  • Page 177: Chapter 6 Document Specification

    Figure 6.1 shows document sizes which the scanner can read. For M3099EH, however, maximum size of A3 can be fed through the scanner. Scanner M3099EH M3099EX Figure 6.1 Document size M3099EX/EH OEM Manual Feeding direction Maximum Minimum DOCUMENT SPECIFICATION (Unit: mm)

  • Page 178: Document Quality

    ADF (JAM error) or double feed occurs, separation pressure adjustment of Appendix C may be effective. CAUTION Never use an original document on this machine. • Paper has clip • Paper has ink, etc. is not dry. M3099EX/EH OEM Manual...
  • Page 179 Check the carbonless papers before use. The carbonless papers may be used if: 1. Ream weight is 44 kg (12 lb) or more 2. Hopper load is 500 sheets or fewer M3099EX/EH OEM Manual DOCUMENT SPECIFICATION...

  • Page 180: Document Limitations

    5 mm Read surface Top of the paper 12 12 Front side Reading surface Center of document More than 30 mm Feed direction Read surface Top of the paper (Unit: mm) Top of document Bottom of document M3099EX/EH OEM Manual...

  • Page 181: Print Prohibit Areas On The Front And Back Surfaces

    Note: Figure 6.3 shows the document as viewed from the reading surface. Reading reference position Figure 6.3 Print prohibit areas on the front and back surfaces M3099EX/EH OEM Manual Front side Reading surface Center of document (Unit: mm) Top of document...

  • Page 182: Grounding Color Area

    If the drop-out color cannot be specified, select “Photo” for the document type (line drawing or photograph). For details of the drop-out color, see next Section. Reading reference Figure 6.4 Grounding color area Main scanning direction M3099EX/EH OEM Manual Grounding color (white) or drop-out color area...

  • Page 183: Drop-Out Color

    • Macbeth PCS meter PCM II is used, which requires a filter. Figure 6.5 Spectrum band Drop-out color standards In the spectrum of fluorescent lamp G54, the PCS value must satisfy the following standards: • Maximum: 0.14 or less • Average: 0.1 or less M3099EX/EH OEM Manual (nm) DOCUMENT SPECIFICATION...

  • Page 184: Job Separation Sheet

    Figure 6.6 Shape of document Document type The document type and ream weight specifications given in page 6- However, the document size shall be A4 or larger (210 mm or more wider). Center of document (Unit: mm) more than 210 mm M3099EX/EH OEM Manual...

  • Page 185: Chapter 7 Consumables And Accessories

    Table 7.1 Consumables Name Lamp Pick roller Roller ASY Belt Belt ASY Print head M3099EX/EH OEM Manual Specification Remark CA02950-0548 Up to 500 hours or more. Two lamps per scanner CA01023-F242 Up to 300,000 sheets or one year. Requires two per scanner.

  • Page 186: Accessories

    Accessories Table 7.2 lists accessories of the scanner. Table 7.2 Accessories Name Power cable (100 V or 200 V) Operator’s guide Quantity Remark M3099EX/EH OEM Manual...

  • Page 187: Chapter 8 Cleaning

    Note: Depending on use, it may be necessary to clean more frequently. Cleaning Tools The tools required for cleaning are as follows: • Cleaning cloth (dry cloth, lint free) • Cleaner F2 • Isopropyl alcohol (Cleaner F1) M3099EX/EH OEM Manual Tools Dry cloth Cleaning sheet Cleaner F2 Dry cloth and...

  • Page 188: Procedure

    Power switch Lamp socket covers 1 Turn off the power switch. 2 Open the upper transport unit. (See page 4-2) 3 Remove the two lamp socket covers (U-shaped spring clips) by pulling them out of their positions. M3099EX/EH OEM Manual...
  • Page 189 Upper transport unit Wire of the heater M3099EX/EH OEM Manual 4 Rotate the lamp so that the two terminals on each and align with the exit slot on the lamp socket. Maintain the alignment and remove the lamp from the lamp sockets.
  • Page 190 6 To re-install lamp/heater, reverse procedures in item 4 above. Note: When re-installing the lamp, make sure to rotate the lamp in the direction as shown in the left figure. 7 Close the upper transport unit. (See page 4-2) M3099EX/EH OEM Manual...

  • Page 191: Cleaning The Rollers

    Cleaning the rollers Cleaning the rollers with Cleaning Sheet: Hopper table “B4” Hopper table Left guide M3099EX/EH OEM Manual 1 Set the hopper table guides to the B4 width. Guide 2 Remove protective paper from the cleaning sheet. With the adhesive side up,...

  • Page 192: Cleaning The Transport Paths

    (See page 4-2) 2 Wipe the transport paths with a dry cloth or cloth soaked in isopropyl alcohol. Use a vacuum cleaner when removing paper dust from the paths. 3 Close the upper transport unit. (See page 4-2) M3099EX/EH OEM Manual...

  • Page 193: Cleaning The Glass Surface

    Clean the glass surface of the sheet guide assembly as follows: Cleaning the sensors Document width detection sensor Clean the four document width detection sensors as follows: Sensors M3099EX/EH OEM Manual 1 Open the upper transport Glass unit. (See page 4-2) 2 Lift the sheet guide...
  • Page 194 3 Wipe the two sensor windows (a and b) with a dry cloth or cloth soaked in isopropyl alcohol. 4 Close the document sensor unit. 5 Close the upper transport unit. (See page 4-2) M3099EX/EH OEM Manual...
  • Page 195 Reading timing sensor Clean the reading timing sensor as follows: Lamp Ejection sensor Clean the ejection sensor as follows: M3099EX/EH OEM Manual 1 Open the upper transport unit. (See page 4-2) 2 Wipe the sensor top of sensor at the transport path...
  • Page 196 8-10 M3099EX/EH OEM Manual...

  • Page 197: A1. Specification

    Character pitch Print area Center of the document Figure A.1 Print area M3099EX/EH OEM Manual Specification Ink jet printing method Alphabet: A to Z, a to z Number : 0, 1, to , 9 Symbol : ! ” # $ % & ’ ( ) * + , – . / : ; < = > ? @ [ ¥...

  • Page 198: A2. Panel Operation

    5 To set the status in EEPROM, press [Mode 1] until * blinks. Then press [Mode 2] to change the LCD display into Screen 5. If you want to set, press [Mode 2]. And the LCD displays Screen 6 about three seconds. M3099EX/EH OEM Manual...

  • Page 199: A2.3 How To Set The Print Number Reset Condition

    Screen 10 RESET Finish !! 0 0 0 0 1 Screen 11 M3099EX/EH OEM Manual 6 If you want to return to the ENDORSER INITIAL screen (Screen 2), press [Mode 1] and [Mode 2] at a time. 7 If you want to return to the initial status to read, press [STOP].

  • Page 200: A2.6 How To Test The Printing By The Operator Panel Operation

    MAINTENANCE MODE initial screen. (Screen 15) 17 Press [Mode 2] once and press [Mode 1] once. Place the document on the stacker. Then press [START]. number by the increment of one. resolution and so on. (See OPERATOR’S GUIDE) M3099EX/EH OEM Manual...

  • Page 201: A3. Print Head Handling

    Print head lock lever NOTICE: The reset of the print head life counter is important to correctly M3099EX/EH OEM Manual 1 Open and remove the endorser cover at the rear top corner of the scanner. Power of the scanner will turn off, if the power is on at cover open.

  • Page 202: A3.2 Print Head Position Adjustment

    The print position is indicated by the indicater behind the tab and the label attached on the rear cover. 3 Close the endorser cover. You can test the printing by the procedure in section A2.6. M3099EX/EH OEM Manual...

  • Page 203: B1. Activating The Setup Mode

    IRAS Warm-up WAIT M3099EX/EH OEM Manual 1 While pressing the [Mode 1], turn on the power of the scanner. Then the LCD displays Screen 1. 2 After a while the LCD displays the SETUP MODE initial screen. (Screen 2) (Or after...

  • Page 204: B3. Contents Of The Setup Mode

    Setting hopper Set the time from when Start Command time Timeout limits until hopper table is lowered. Setting heater Set in EEPROM whether the heater control is control on or off. M3099EX/EH OEM Manual...

  • Page 205: B3.1 Setting Double Feed Detection

    DOUBLE FEED CHECK Screen 5 DOUBLE FEED CHECK Screen 6 M3099EX/EH OEM Manual 4 At Screen 2, press [Mode 1] once to go to the DOUBLE FEED CHECK screen. (Screen 3) 5 Press [Mode 2] to see Screen 4. If “ON” is displayed, the error will be detected when the double-feed is occured.

  • Page 206: B3.2 Setting Ipc-2 Pre-Set Mode

    EEPROM. If you press the [Mode 2] at Screen 10, IPC-2 pre-set mode can be used and the setting number is stored to EEPROM. Yes-Mode 2 When you close the setup mode, go to 9 . Details M3099EX/EH OEM Manual...
  • Page 207 (3) When IPC-2 pre-set mode is executed When IPC-2 pre-set mode is executed in online mode, the reading parameter is valid or invalid (Host setting is invalid) as follows: M3099EX/EH OEM Manual 1 – 5 are the pattern number set in setup mode.

  • Page 208: B3.3 Reset Of Abrasion Counter

    [Mode 2]. And you can see Screen 14 for 3 seconds. If you don’t want it, press [Mode 1] to go to Screen 12. 000000 16 When you close the setup mode, go to 9 . Density Line-art Halftone /Photo Automatic separation M3099EX/EH OEM Manual...

  • Page 209: B3.4 Setting Buzzer

    PREPICK SET Screen 17 PREPICK SET Screen 18 M3099EX/EH OEM Manual 17 At Screen 2, press [Mode 1] four times to go to the BUZZER SET screen. (Screen 15) 18 Press [Mode 2] to see Screen 16. If “ON” is displayed, the buzzer will ring when the error is occured.

  • Page 210: B3.6 Adjusting Lcd Contrast

    SLOW each time you press [Mode 1]. The status will be set in EEPROM automatically. 30 If you want to return to Screen 21, press [Mode 2]. When you close the setup mode, go to 9 . M3099EX/EH OEM Manual...

  • Page 211: B3.8 Setting Initial Value Of Endorser

    When you set the reset method of endorser, you must see Section A2.3 of Appendix A. The default setting is “ON” (The print number will be reset when HOPPER EMPTY is detected.). M3099EX/EH OEM Manual to SETUP menu is failed. 0 0 0 0 1 (1 page)

  • Page 212: B3.10 Reset Of Endorser

    #8 At Screen 26, press [Mode 1] until the digit you want to change blinks. Then press [Mode 2] until the digit changes as you want. (The specifiable range is from 0.2 to 29.8 sec. in 0.2 sec. step.) M3099EX/EH OEM Manual...

  • Page 213: B3.14 Setting Picking Time

    Screen 29 TIME-OUT SET X X X X S Screen 30 M3099EX/EH OEM Manual 39 Press [Mode 1] and [Mode 2] at a time to see Screen 25. The settings are stored to EEPROM. 40 When you close the setup mode, go to 9.

  • Page 214: B3.16 Setting Hopper Time

    0 to 30 sec. in 1 sec. step.) 54 Press [Mode 1] and [Mode 2] at a time to see Screen 31. The settings are stored to EEPROM. 55 When you close the setup mode, go to 9 . M3099EX/EH OEM Manual...

  • Page 215: B3.17 Setting Heater Control

    HEATER CONTROL Screen 33 HEATER CONTROL Screen 34 M3099EX/EH OEM Manual 56 At Screen 2, press [Mode 1] seventeen times to go to the HEATER CONTROL screen. (Screen 33) 57 Press [Mode 2] to see Screen 34. If “ON” is displayed, the heater control will be done.
  • Page 216 B-14 M3099EX/EH OEM Manual...

  • Page 217: Separation Pressure Adjustment

    ACHTUNG Warten Sie mindestens 3 Minuten nach Ausschalten, bevor Sie mit dem Austausch beginnen. Upper transport unit Lever M3099EX/EH OEM Manual Operator panel 1 Turn off the power switch. Make sure that the hopper table is at the bottom. 2 Open the upper transport unit.
  • Page 218 Turn clockwise by 45 . (In- crease the separation pressure.) • Double feed: Turn counter-clockwise by 45 . (Decrease the separation pres- sure.) Notice: If the paper feed error reccur, try this adjustment again until the lever stops. M3099EX/EH OEM Manual...

  • Page 219: Glossary Of Terms

    1 or a 0, in the binary numbering system. Eight bits equal one byte. Dither Technique for producing halftone images representing the entire grayscale using two pixel levels black and white. Dots per inch. M3099EX/EH OEM Manual GLOSSARY OF TERMS GL-1...
  • Page 220 A base-16 numbering system (also commonly referred to as hex numbers). Since a base-16 system requires 16 digits, numbers 0 through 9 and letters A through F are used. It is convenient to express binary numbers in hexadecimal because fewer digits are required. GL-2 M3099EX/EH OEM Manual...
  • Page 221 Noise removal Isolated noise from an image appearing as black spots in white areas and voids in black areas is removed to improve image quality. M3099EX/EH OEM Manual GLOSSARY OF TERMS GL-3...
  • Page 222 Smoothing eliminates jaggies from slanted lines and curves. Irregular convexities are deleted and irregular concavities filled in. This is useful in OCR applications, for example. Temporary error A status which the operator can recover, such as paper jam, hopper empty, cover open, pick miss. GL-4 M3099EX/EH OEM Manual...
  • Page 223 Cleaning the transport paths 8-6 Cleaning Tools 8-1 CLEAR command 3-19 Closing the Upper Transport Unit 4-2 Commands 3-17 Command/response correspondence 3-91 M3099EX/EH OEM Manual Command and Response 3-14 Command/response timing chart 3-93 Configuration 1-5 Configuration of the scanner 1-5 Connection specifications 3-1...
  • Page 224 Operator panel 1-6, 1-8 Operator panel arrangement 4-3 Operator Panel Arrangement and Functions 4-3 Operator panel functions 4-3 Optical unit (back-side) 1-6 Optical unit (front-side) 1-6 Option specifications 2-6 Output density 2-1 Overlay function 1-10 Overview 1-1 M3099EX/EH OEM Manual...
  • Page 225 Scanning speed 2-1 SEND DATA command 3-58 SEND DITHER 1 command 3-53 SEND DITHER 2 command 3-55 SENSE command 3-51 Sensor 2-1 M3099EX/EH OEM Manual Shape 6-8 Simplex (front-side) reading mode 4-9 Simplex reading mode 4-5 Smoothing 1-8 SPECIFICATIONS 2-1...
  • Page 226 IN-4 M3099EX/EH OEM Manual...
  • Page 227 What is your overall rating of this publication? What is your occupation? Very Good Fair Good Poor Your other comments may be entered here. Please be specific and give page, paragraph and line number references where applicable. M3099EX/EH OEM Manual Is the material presented effectively? Sales Fully Well Operating Covered...

This manual is also suitable for:

M3099exM3099eh

Table of Contents

Save PDF