Table of Contents
Advertisement
Enjoying TV with unit's
TV
speakers
Preparation
Turn on your TV and select the appropriate audio input mode
[AUX, ARC, D-IN] to suit the connections to this unit. (
Surround sound effects
You can enhance stereo sources with surround sound effect.
1
Press [SURROUND] several times to select
the effect.
2
While "MANUAL" is displayed on the unit's display
Press [2, 1] and select the desired effect.
Surround modes to enjoy TV audio or stereo
sources from all speakers:
≥ DOLBY PRO LOGIC II MOVIE
≥ DOLBY PRO LOGIC II MUSIC
≥ SUPER SURROUND
For more detailed information on this operation, please refer to
the "Enjoying surround sound effects" section on page 26.
Sound modes
You can adjust the mode depending on the source or situation.
1
Press [SOUND] several times to select the
mode.
2
While the selected mode is displayed on the unit's
display
Press [2, 1] and select the desired setting.
For more detailed information on this operation, please refer to
the "Changing the sound modes" section on page 26.
VQT3M06
34
Linked operations with
the TV
(VIERA Link "HDAVI
Control
")
TM
25)
What is VIERA Link "HDAVI Control"?
VIERA Link "HDAVI Control" is a convenient function that
offers linked operations of this unit, and a Panasonic TV
(VIERA) under "HDAVI Control".
You can use this function by connecting the equipment
with an HDMI cable. See the operating instructions for
connected equipment for operational details.
Preparation
1 Set "VIERA Link" to "On" (
(The default setting is "On".)
2 Set the "HDAVI Control" operations on the connected
equipment (e.g., TV).
3 Turn on all "HDAVI Control" compatible equipment and
select this unit's input channel on the connected TV so that
the "HDAVI Control" function works properly.
When the connection or settings are changed, repeat
this procedure.
Setting the audio link
∫ Setting the audio link with the TV
With the remote control;
≥ Select the actual TV audio connection on the main unit.
1 Press [HOME].
2 Press [3, 4, 2, 1] to select "Others" and press [OK].
3 Press [OK] to select "Setup".
4 Press [3, 4] to select "TV / Device Connection".
5 Press [3, 4] to select "TV Audio Input".
6 Press [2, 1] to switch "AUX", "ARC" or "DIGITAL IN".
≥ Select "AUX" or "ARC"*
DIGITAL AUDIO IN terminal is used for the STB
connection.
Whenever the connection or settings are changed, reconfirm
the points above.
∫ Setting the audio link with the STB
With the remote control;
≥ Select the STB input channel on the TV.
1 Press [EXT-IN] to select "D-IN".
2 Press [STATUS] to select "CABLE/SATELLITE AUDIO
ON".
≥ If the input channel of the STB on the TV is changed or if you
want to change the device allocated for the linked
operations, select "CABLE/SATELLITE AUDIO OFF" in step
2 above and then repeat steps 1 to 2.
≥ [BTT775] [BTT770] [BTT370]
If using "HDMI IN1" or "HDMI IN2" as a source, set to
"CABLE/SATELLITE AUDIO OFF" in step 2.
44).
in "TV Audio Input" when the
1
Hide quick links:
Advertisement
Table of Contents
