PROJECTION TV RECEIVER Chassis : P60A(N) Model : HCP4241WX/XAA (HC-P4241W) PROJECTION TV RECEIVER CONTENTS Feature and Advantages Precautions Specifications Alignment and Adjustments Diagnostics Exploded View and Parts List Electric Parts List PCB Diagrams Schematic Diagrams...
The current measured should the X–ray Protection Specifications Label, and not exceed 0.5 milliamp. Reverse the power- the Product Safety and X-ray Warning Note on plug prongs in the AC outlet and repeat the the service data schematic. test. Samsung Electronics...
Page 4
14. Components, parts and wiring that appear to have overheated or that are otherwise damaged should be replaced with parts that meet the original specifications. Always determine the cause of damage or overheat- ing, and correct any potential hazards. Samsung Electronics...
Page 5
(except lamp) are damaged, replace the whole optical engine. 5. Check the insulation between the blades of the AC plug and accessible conductive parts (examples: metal panels, input terminals and earphone jacks). Samsung Electronics...
Page 6
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Samsung Electronics...
W/B Coordinates Lx : 300 Ly : 295 Y : 0.3 High Voltage 29KV 250V/6.3A FUSE CODE NO : 3601-000300 240W Power Consumption 1004 X 471 X 967mm Dimension 39.5 X 18.5 X 38.0 inches 40.4Kg 89lbs Weight Samsung Electronics...
Data Increase/Decrease for the Selected Item 4-1-4 Cautions Regarding service Mode 1. Do not adjust the fixed attributes, only the adjustables. 2. For adjustments of RF and 1080i Modes, switch to the respective input source and proceed with the adjustments. Samsung Electronics...
Page 10
0 ~ 63 *Fixed H Trapezium 0 ~ 63 *Fixed 0 ~ 63 *Fixed Angle 0 ~ 63 *Fixed V Position 0 ~ 63 *Fixed CXA Left Blk 0 ~ 63 *Fixed CXA Right Blk 0 ~ 63 *Fixed Samsung Electronics...
Page 11
-63 ~ 63 *Fixed H Trapezium -63 ~ 63 *Fixed -63 ~ 63 *Fixed Angle -63 ~ 63 *Fixed V Position -63 ~ 63 *Fixed CXA Left Blk -63 ~ 63 *Fixed CXA Right Blk -63 ~ 63 *Fixed Samsung Electronics...
Page 12
-63 ~ 63 *Fixed H Trapezium -63 ~ 63 *Fixed -63 ~ 63 *Fixed Angle -63 ~ 63 *Fixed V Position -63 ~ 63 *Fixed CXA Left Blk -63 ~ 63 *Fixed CXA Right Blk -63 ~ 63 *Fixed Samsung Electronics...
Page 13
*Fixed NR Hight Ref (s) 0 ~ 127 *Fixed NR Low Ref (s) 0 ~ 127 *Fixed NR Hight Value (s) -128 ~ 127 *Fixed NR Low Value (s) -128 ~ 127 *Fixed NR Read M/S Read Price Samsung Electronics...
Page 18
0 ~ 255 0 ~ 15 *Fixed CTI Gain 0 ~ 63 *Fixed DEP TH Cor DEP OV Gain H 0 ~ 255 *Fixed DEP R INT 0 ~ 127 *Fixed CTE Gain 0 ~ 255 *Fixed 4-10 Samsung Electronics...
Page 19
On ↔ Off V Chip (CT, CTA) V Chip Area On ↔ Off Sub Woofer On ↔ Off No Sync Mute On ↔ Off On ↔ Off Turbo Effect On ↔ Off Burst Screen On ↔ Off Samsung Electronics 4-11...
Page 20
Alignment and Adjustments 4-3 Screen Change (When adjusting I C Bus Geometric items) V SHIFT V SIZE V LINEARITY H SIZE H Trapezium H Parabola H SHIFT ANGLE 4-12 Samsung Electronics...
Page 21
8. Select R-drive, G-drive, and B-drive by pressing the keys. ENTER 9. Adjust the high light with viewing the light side of the screen. 10. If necessary, redo screen adjustments and 6~9. 11. Press the Add key to exit. Samsung Electronics 4-13...
Page 22
# Adjust the electric focus before beginning. $ Adjust the DY tilt (TILT) before beginning. 2. How to Adjust (Green Lens Adjustment) ! Loosen the lens screw for easier adjustment. @ Press Mute, 1, 8 and 3, sequentially to enter Convergence Mode. 4-14 Samsung Electronics...
Page 23
14. Adjust the Focus-pack VR for fine focusing. 15. Press the button on the remote control, and the mode changes to the Convergence Adjustment mode. S.MODE 16. Press the button on the remote control to return to normal viewing. Samsung Electronics 4-15...
Page 24
Screen Siz e : X 92 5, Y 523 (X: 396 =12*2 + 31* 12, Y : 4 88= 40* 2+68* 6) 28.03mm 72.41mm 28.03mm 42.87mm 72.88mm 42.87mm ♣ The DTV Mode Adjustment is available only when a Set-top Box is connected. 4-16 Samsung Electronics...
Page 25
4-6-4 4741W DTV Mode 1W DTV M ode : X 1045, Y 588 (X: 396=12*2+31 *12, Y:488=40*2+ 68*6) 31.67mm 81.81mm 31.67mm 48.20mm 81.93mm 48.20mm ♣ The DTV Mode Adjustment is available only when a Set-top Box is connected. Samsung Electronics 4-17...
Page 26
4-6-6 5241W DTV Mode 1W DTV M ode : X 1153, Y 649 (X: 396=12*2+31 *12, Y:488=40*2+ 68*6) 34.94mm 90.26mm 34.94mm 53.20mm 90.43mm 53.20mm ♣ The DTV Mode Adjustment is available only when a Set-top Box is connected. 4-18 Samsung Electronics...
Page 27
(Backwards: Left or Up) RF mode Moves the Convergence Pattern to the left Save data after completing Convergence Adjustment Automatic Convergence Adjustment after completing Convergence Adjustments (Automatic Color Adjustment to compensate for the earth s magnetic field.) Samsung Electronics 4-19...
Page 28
Press to switch the cursor direction horizontally or vertically. ADD/DEL 12. SAVE KEY After the Convergence Adjustments are completed, press to save data. S.MODE 13 EXIT KEY After the Convergence adjustments are completed, press to exit to TV mode. 4-20 Samsung Electronics...
Page 29
White Cross on the background 5-425 (Press in regular order) (white cross) 42Q2HLX (42Q2HL) 47”(4741W) 4741WX White Cross on the background 5-472 (white cross) 47Q2HLX (47Q2HL) 5241WX 52”(5241W) White Cross on the background 5-522 (white cross) 52Q2HLX (52Q2HL) Samsung Electronics 4-21...
Page 30
3. Press Mute, 1, 8, and 3 (on the remote control) sequentially to enter Convergence Mode. The Test Pattern is displayed. MUTE S.MODE If an OSD (On-Screen Display) appears during the process, press the key to exit Caution Convergence mode and then re-enter Convergence mode. 4-22 Samsung Electronics...
Page 31
6. Scene Adjustment Use the left (œ)/right (√)/up (…)/down (†) buttons to move the cursor, and use the channel …,† button and the volume +, - buttons to adjust the convergence. <Cg Pattern> ENTER Samsung Electronics 4-23...
Page 32
SOURCE Caution Pressing the key again will switch to horizontal movement. 8. Use the Line Move Key for global shaping in the beginning stages of Convergence Adjustment. Moves Entire Line 4-24 Samsung Electronics...
Page 33
14. Adjust the Blue Color Convergence by performing steps 5 ~ 10 and 13. 15. After adjusting all the colors, fill the screen with R, G and B color to validate. Adjust again if required, by selecting the corresponding color key. Samsung Electronics 4-25...
Page 34
18. Follow the same procedure for DTV (1080i) Convergence Adjustment as you did for Normal Mode Convergence Adjustment. If Convergence Adjustment is not properly done, or the Convergence Center escaped the Note sensor’s detection area, an adjustment error occurs. Therefore, the Jig Screen should be used for precise Convergence Adjustment during servicing. 4-26 Samsung Electronics...
Page 35
1. After completing the Convergence Adjustment, press the Memory button to save the data and exit back to a black screen. Then enter Convergence Mode again to do the Automatic Color Adjustment by pressing the “Automatic Color Adjustment” button. Up, Down Left, Right Samsung Electronics 4-27...
Page 36
Alignment and Adjustments 4-8 Pin Spec 4-8-1 Convergence Module CNZ01 NAME NAME D-FOCUS D2(SCL) C-SYNC CG-R CG-G H-BLK CG-B V-BLK D3(SDA) F-BLK 5V-CG 4-28 Samsung Electronics...
5-1 Opening the Set and Replacing Assemblies 5-1-1 Replacing and Repairing Each Assembly (Opening the Back Cover) Remove all indicated screws on the rear side of the Set Repair or replace the required Assembly CG Module MAIN DY JACK Samsung Electronics...
Page 38
Troubleshooting 5-1-2 Replacing and Repairing the CRT-PCB (Opening the Front Cover) Remove all indicated screws and open the Front Cover. Repair the frontal PCB-CRT or replace it after removing the attached connectors PCB-CRT R PCB-CRT G PCB-CRT B Samsung Electronics...
Page 39
Remove the screws indicated and detach the Top Cover Remove the Dust Cover that prevents dust from entering into the screen Before proceeding, disconnect all the DY and Connectors connected to the assembly. Remove the 4 corner screws from the CRT and replace the CRT Samsung Electronics...
Page 40
CN801 and CN802 on the SUB Board Normal Abnormal Abnormal Check the output terminal of CNZ02 (BV,BH,RV,RH,GV,GH) Normal Validate the H-BLK and V-BLK outputs of the MAIN Board Check the respective circuits regarding the symptoms Replace the Convergence Module Samsung Electronics...
Page 41
Check FD802S of the SUB Board Check IC601 Input Terminal Pin 5 Abnormal Normal Check the Sound Mute Circuit Check IC601 Input Terminal Pins 7 and 11 Normal Abnormal Check IC601 Check IC602 Input Terminals Normal Abnormal Check IC602 Check IC605 Input Terminals Samsung Electronics...
Page 42
Check CN501 Pins 1, 3, and 5 Normal Check IC501, 531, and 561 Abnormal Check the CN501 Connector Abnormal Normal Replace the CN501 Connector Check IC04 Input Terminal Pins 20, 21 and 22 Normal Check IC04 Abnormal Check IC03 Samsung Electronics...
Page 43
Troubleshooting Check the Heater (Abnormal) Abnormal Replace R513, 543 and 573 Normal Replace R513, 543 and 573 Abnormal Check CB504 Pin 5 of the CRT-PCB Check R464 Samsung Electronics...
Schematic Diagrams 9. Schematic Diagrams 9-1 MAIN 1 This Document can not be used without Samsung’s authorization. Samsung Electronics...
Page 65
Schematic Diagrams 9-2 MAIN 2 This Document can not be used without Samsung’s authorization. TP01 TP02 TP01 TP02 Samsung Electronics...
Page 66
Schematic Diagrams 9-3 MAIN 3 This Document can not be used without Samsung’s authorization. TP03 TP04 TP03 TP04 Samsung Electronics...
Page 67
Schematic Diagrams 9-4 MAIN 4 This Document can not be used without Samsung’s authorization. TP05 TP06 TP07 TP11 TP18 TP10 TP17 TP08 TP09 TP16 TP08 TP15 TP07 TP14 TP09 TP06 TP13 TP12 TP05 TP10 TP18 TP17 TP16 TP15 TP14 TP13...
Page 68
Schematic Diagrams 9-5 MAIN 5 This Document can not be used without Samsung’s authorization. Samsung Electronics...
Page 69
Schematic Diagrams 9-6 MAIN 6 This Document can not be used without Samsung’s authorization. Samsung Electronics...
Page 70
Schematic Diagrams 9-7 SUB 1 This Document can not be used without Samsung’s authorization. TP19 TP19 Samsung Electronics...
Page 71
Schematic Diagrams 9-8 SUB 2 This Document can not be used without Samsung’s authorization. Samsung Electronics...
Page 72
Schematic Diagrams 9-9 SUB 3 This Document can not be used without Samsung’s authorization. TP20 TP20 TP21 TP21 Samsung Electronics...
Page 73
Schematic Diagrams 9-10 SUB 4 This Document can not be used without Samsung’s authorization. 9-10 Samsung Electronics...
Page 74
Schematic Diagrams 9-11 CG MDL 1 This Document can not be used without Samsung’s authorization. Samsung Electronics 9-11...
Page 75
Schematic Diagrams 9-12 CG MDL 2 This Document can not be used without Samsung’s authorization. 9-12 Samsung Electronics...
Page 76
Schematic Diagrams 9-13 CRT This Document can not be used without Samsung’s authorization. Samsung Electronics 9-13...
Page 77
Schematic Diagrams 9-14 VM / SIDE A/V This Document can not be used without Samsung’s authorization. SIDE A/V 9-14 Samsung Electronics...
Page 78
Schematic Diagrams 9-15 KEY-CONTROL / POWER-CONTROL This Document can not be used without Samsung’s authorization. KEY-CONTROL POWER-CONTROL Samsung Electronics 9-15...