Table of Contents
Advertisement
CLEANING EXTERIOR AND ATTACHMENTS
1
Unplug cord from
wall
outlet
DO NOT drip water on cleaner
2 Clean exterior using a clean, soft cloth that has been dipped in a solution of mild liquid
detergent and water, then wrung dry Wipe dry after cleaning
3 To reduce static electricity and dust build-up, wipe outer surface of cleaner and attachments
4 Wash attachments in warm soapy water, nnse and air dry
Do not clean in dishwasher
or clothes washer
DO NOT USE ATTACHMENTS IF THEY ARE WET
CAUTION
Attachments used in dirty areas (such as under a refrigerator) should not be used
on other surfaces until they are washed They could leave marks.
REMOVING CLOGS
Al
WARNING
Electric Shock or Personal Injury Hazard
Disconnect electncal supply before servicing or cleaning the unit Failure to do so
could result in electncal shock or personal injury from cleaner suddenly starting
For best cleaning
results, keep the air¬
flow passages clear
Unplug the power
cord from the outlet
before checking the
airflow passage
Check each starred
area occasionally for
clogs
Disconnect the wand from the short hose
and check the wand and hoses for clogging
Plug in the vacuum cleaner and turn it on
While running the vacuum cleaner with the
hose disconnected, stretch the hose in and
out to remove the clog
Pull down on
the suction
inlet cover
and check
for clogging
in this area
OFF and
jjll
Nozxie
unplug the fcf|
Hose
vacuum
-
cleaner over, exposing the underside
Remove
the lower plate
Remove the short nozzle hose
from the housing by lifting it straight up Inspect
the hose end and clear it of any obstructions
Reinstall the short nozzle hose and lower plate
See the Removing/Installing the Lower Plate
section for detailed instructions
-
16
-
Advertisement
Table of Contents
