Table of Contents
Advertisement
BEFORE REQUESTING SERVICE
WARNING
Electrical Shock or Personal Injury Hazard.
Disconnect the electrical supply before servicing or cleaning the unit. Failure to do
so could result in electrical shock or personal injury from cleaner suddenly starting.
Review this chart to find do-it-yourself solutions for minor performance
problems. Any service needed, other than those described in these
Operating Instructions, should be performed by an authorized service
representative.
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Cleaner
will not run.
1. Unplugged at wall outlet.
1. Plug in firmly. Push On/Off switch
to On.
2. On/Off switch not turned on.
2. Push On/Off switch to On.
3. Tripped circuit breaker/blown
fuse at household service panel.
3. Reset circuit breaker or replace
fuse.
Poor job of dirt
1. Full or clogged dust bag.
t. Change bag.
pickup.
2. Broken belt.
2. Replace belt.
3. Clogged nozzle.
3. Clean nozzle area.
4. Hose not inserted fully.
4. Insert hose.
5. Worn agitator brushes.
5. Replace agitator brushes.
6. Hole in hose.
6. Replace hose.
7. Dust cover improperly installed.
7. Properly install dust cover.
Light will
1. Burned out light bulb.
1. Replace light bulb.
not work.
Dust escapes
1. Bag improperly installed.
1. Properly install bag.
the paper bag.
2. Bag torn.
2. Replace bag.
-
17
-
Advertisement
Table of Contents
