English BRUSHLESS CORDLESS COMPACT IMPACT DRIVER DCF840 Congratulations! EC-Declaration of Conformity You have chosen a D WALT tool. Years of experience, thorough Machinery Directive product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data Brushless Cordless Compact Impact Driver DCF840...
English 3) Personal Safety power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by a ) Stay alert, watch what you are doing and use poorly maintained power tools. common sense when operating a power tool. Do not f ) Keep cutting tools sharp and clean.
English Additional Specific Safety Rules for Impact Important Safety Instructions for All Battery Chargers Drivers SAVE THESE INSTRUCTIONS: This manual contains important • Hold power tool by insulated gripping surfaces when safety and operating instructions for compatible battery performing an operation where the fastener may chargers (refer to Technical Data).
English reassembly may result in a risk of electric shock, electrocution A cold battery pack will charge at a slower rate than a warm battery pack. The battery pack will charge at that slower rate or fire. throughout the entire charging cycle and will not return to •...
English • Charge the battery packs only in D WALT chargers. of the UN Recommendations on the Transport of Dangerous Goods Manual of Tests and Criteria. • DO NOT splash or immerse in water or other liquids. In most instances, shipping a D WALT battery pack will be Do not store or use the tool and battery pack in •...
English nOTE: Battery packs should not be stored completely 1 Charger depleted of charge. The battery pack will need to be recharged 1 Belt hook (included with some models) before use. 1 Kitbox (included with some models) Labels on Charger and Battery Pack 1 LLi-Ion battery pack (C1, D1, E1, L1, M1, P1, S1, T1, X1, Y1 models) In addition to the pictographs used in this manual, the...
Page 12
English DO nOT let children come into contact with the tool. iMPORTAnT: When attaching or replacing a belt hook, use only Supervision is required when inexperienced operators use the screw that is provided. Be sure to securely tighten the screw. this tool. A belt hook ...
English Worklights (Fig. A) time than recom mended could cause the fasteners to be overstressed, stripped or damaged. There are worklights 7 located above the trigger switch 1 MAINTENANCE The worklights will be activated when the trigger switch is depressed. Your D WALT power tool has been designed to operate When the trigger is released, the worklights will stay illuminated over a long period of time with a minimum of maintenance.
Page 14
English Rechargeable Battery Pack This long life battery pack must be recharged when it fails to produce sufficient power on jobs which were easily done before. At the end of its technical life, discard it with due care for our environment: •...
Page 16
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be luxembourg België en luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)